:crying:When i wake up this morning, my 9100 just can be turned on, then i charge it with its charger, and the phone still can't work, i press the power button try to turn on the phone, but just failed again and again, i don't know why, my phone had rooted. who can tell me the reason?
junior2012 said:
:crying:When i wake up this morning, my 9100 just can be turned on, then i charge it with its charger, and the phone still can't work, i press the power button try to turn on the phone, but just failed again and again, i don't know why, my phone had rooted. who can tell me the reason?
Click to expand...
Click to collapse
-Remove your battery for few (about 5) minutes,
-reinsert your battery (ensure the battery has contact with the good pins)
-connect your charger, if your phone comes back to life, then all is well
Report what happens
Swyped from my Galaxy SII
First of all , use a new fully charged battery ( may be a friend's GS2 battery ) and try to boot ur phone up
If it doesnt work then boot into recovery mode try to wipe data and cache or try download mode
If ur phone doesnt boot up neither in download or recovery mode , then u can use a USB JIG , if this fails try to do a Jtag
Provide more info if ur phone lights up and gives u the battery charge animation or not .( it might be ur battery is just bricked )
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
WizaJ said:
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi.
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow. Google a lot to learn how it works, the wires, what is positive and negative and bla bla bla because your biggest problem NOW is not having power to work with the phone.
Hope you have good luck!
=)
Sorry please post your thread at Q&A
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
if you have any problem PM me.
sorry for my english.
WizaJ said:
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
the phone doesnt respond to anything
aftergr said:
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Click to expand...
Click to collapse
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
zilian28 said:
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow.
=)
Click to expand...
Click to collapse
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
Xperia_Fans said:
Sorry please post your thread at Q&A
Click to expand...
Click to collapse
sorry, i moved it there
copper62472 said:
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
Click to expand...
Click to collapse
thanks, you give me hope. so what equipment did u use? i'll pm u
In my opinion ders something wrong with the partitioning when you entered the command....
Try looking into that direction.
Im no expert just a suggestion...
Devin-J said:
the phone doesnt respond to anything
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
sorry, i moved it there
thanks, you give me hope. so what equipment did u use? i'll pm u
Click to expand...
Click to collapse
Use this guide to open the phone up and just disconnect the battery for a few minutes. Then try connecting in either fastboot/flash mode. The phone may need to be repartitioned and reflashed.
Same issue
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Help
schmeißfliege said:
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Click to expand...
Click to collapse
My xperia p is also in dead condition now. I'm thinking like it's battery is fully drained. It all started with flashing of a custom kernel.
i could take the battery out. i need to charge it by external means. How can i do that? Please help me.
I playing game wile my phone charging and then it turnoff after that it can't open but only I charging it show RED LED and can't open , can't connect with fastboot and flash MOD any solution?
VocaloidBoy said:
I playing game wile my phone charging and then it turnoff after that it can't open but only I charging it show RED LED and can't open , can't connect with fastboot and flash MOD any solution?
Click to expand...
Click to collapse
I've got something similar to you when messing with my XU.
Almost freaked out 'cos I couldn't use fasboot.
What I do:
Remove the battery, left 'bout 5 min, put it back
Left it on the wall charger for something like 2h
Then, tried to power on. It got stuck on bootloop (bootloader unlocked)
powered off by removing battery, put it back on again
now, with it powered off, prepared my kernel of choice (any with CWM) in fastboot
when asked to plug in the phone, did as usual (vol + and usb)
BAM, the kernel flashed without any issue, was able to recover an old backup and got my phone back.
If, by any chance, you have a phone that you cannot remove battery, try just leaving in the wall charger for a time. pay attention to the led, if it's red, than it's charging (supposed). then try to remove the charger and put it back again, see if anything shows up in the screen.
raf.lozano said:
I've got something similar to you when messing with my XU.
Almost freaked out 'cos I couldn't use fasboot.
What I do:
Remove the battery, left 'bout 5 min, put it back
Left it on the wall charger for something like 2h
Then, tried to power on. It got stuck on bootloop (bootloader unlocked)
powered off by removing battery, put it back on again
now, with it powered off, prepared my kernel of choice (any with CWM) in fastboot
when asked to plug in the phone, did as usual (vol + and usb)
BAM, the kernel flashed without any issue, was able to recover an old backup and got my phone back.
If, by any chance, you have a phone that you cannot remove battery, try just leaving in the wall charger for a time. pay attention to the led, if it's red, than it's charging (supposed). then try to remove the charger and put it back again, see if anything shows up in the screen.
Click to expand...
Click to collapse
Thank bro mow my phone working
________________________________
Phone : Xperia U
Rom : Stock ICS modded
Kernel : stock
Bootloader : Unlocked ( thank god)
Hi. for the longest time i've been running Cyanogen 10.1 on my device. Recently I've updated to 10.2. IN the instructions, it just said flash the new zip and the gapps then reboot. I did just that and my phone initially loaded well. it was able to update and such. However, I noticed that after booting, it would hang at the lockscreen for 2-3 seconds then reboot. To end the loop, i tried pulling out the battery. I then tried turning it on but it would only stop at the sII splash screen. I then pulled out the battery again. When plugged in, it would go to the battery charging screen but would hang after awhile so i pulled the batt once again. Now, even plugged, the battery screen won't load anymore. the screen would just open w/ a battery and hang there, then the screen would close and repeat. I tried entering download mode by the button-combo or the USB jig but still none. can anyone help me?
No download mode = not good. Try searching through king_rat (xda user) posts for his method to jump start into download mode.
You can also try:
1. Pull the battery, leave it out for a minute.
2. Replace the battery, but don't turn it on.
3. Hold the button combo for DL mode.
4. Get a friend to plug in the phone charger.
On a working phone, the above procedure would boot into DL mode.
Sent from a galaxy far, far away
flashing a zip wont make ur phone dead... u should try another battery and make sure the combo u are trying to enter download mode is correct
usb jig i guess doesnt works wid jb or later (due to bootloader updates bt i may b wrong so plz pardon)
Hi,
Im using now AICP for 3-4 days now.
Today my battery decreased very fast and now my tablet is powered off. I can't start my tablet (sgp621) or charge it.
When I put the cable in it, the LED is red.
Im charging it like 6 hours now and I still can't start my tablet.
Fastboot mode also did't work (pressing vol up and put the cable in).
Booting in the recovery also didnt work (pressing start and vol down)
The last thing what I did is use the stadard browser app and turn the energy saving mode on.
I only have one app installed: mx player pro
My bootloader is unlocked, twrp (TWRP_multirom_scorpion_3.1.0.0_3.10_201703.img) is installed.
I had lineage os before but I formatted all partitions except of my sd card .
Is my tablet dead?
I hope someone can help me
My SGP621 recently started acting up. The power button doesn't work, and the up volume is now the power button. I can't even shut it down. If I do, it auto-powers on. I think it's done.
Omar321 said:
Hi,
Im using now AICP for 3-4 days now.
Today my battery decreased very fast and now my tablet is powered off. I can't start my tablet (sgp621) or charge it.
When I put the cable in it, the LED is red.
Im charging it like 6 hours now and I still can't start my tablet.
Fastboot mode also did't work (pressing vol up and put the cable in).
Booting in the recovery also didnt work (pressing start and vol down)
The last thing what I did is use the stadard browser app and turn the energy saving mode on.
I only have one app installed: mx player pro
My bootloader is unlocked, twrp (TWRP_multirom_scorpion_3.1.0.0_3.10_201703.img) is installed.
I had lineage os before but I formatted all partitions except of my sd card .
Is my tablet dead?
I hope someone can help me
Click to expand...
Click to collapse
Do you still need help?