Please Help My phone Now can't open - Sony Xperia P, U, Sola, Go

I playing game wile my phone charging and then it turnoff after that it can't open but only I charging it show RED LED and can't open , can't connect with fastboot and flash MOD any solution?

VocaloidBoy said:
I playing game wile my phone charging and then it turnoff after that it can't open but only I charging it show RED LED and can't open , can't connect with fastboot and flash MOD any solution?
Click to expand...
Click to collapse
I've got something similar to you when messing with my XU.
Almost freaked out 'cos I couldn't use fasboot.
What I do:
Remove the battery, left 'bout 5 min, put it back
Left it on the wall charger for something like 2h
Then, tried to power on. It got stuck on bootloop (bootloader unlocked)
powered off by removing battery, put it back on again
now, with it powered off, prepared my kernel of choice (any with CWM) in fastboot
when asked to plug in the phone, did as usual (vol + and usb)
BAM, the kernel flashed without any issue, was able to recover an old backup and got my phone back.
If, by any chance, you have a phone that you cannot remove battery, try just leaving in the wall charger for a time. pay attention to the led, if it's red, than it's charging (supposed). then try to remove the charger and put it back again, see if anything shows up in the screen.

raf.lozano said:
I've got something similar to you when messing with my XU.
Almost freaked out 'cos I couldn't use fasboot.
What I do:
Remove the battery, left 'bout 5 min, put it back
Left it on the wall charger for something like 2h
Then, tried to power on. It got stuck on bootloop (bootloader unlocked)
powered off by removing battery, put it back on again
now, with it powered off, prepared my kernel of choice (any with CWM) in fastboot
when asked to plug in the phone, did as usual (vol + and usb)
BAM, the kernel flashed without any issue, was able to recover an old backup and got my phone back.
If, by any chance, you have a phone that you cannot remove battery, try just leaving in the wall charger for a time. pay attention to the led, if it's red, than it's charging (supposed). then try to remove the charger and put it back again, see if anything shows up in the screen.
Click to expand...
Click to collapse
Thank bro mow my phone working
________________________________
Phone : Xperia U
Rom : Stock ICS modded
Kernel : stock
Bootloader : Unlocked ( thank god)

Related

[Q] Phone not switching on after charge!!

Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
rishi_storm said:
Hi
I just flashed UI-One MIUI 4.0 PORT [BETA 1] by TEAM MAC (http://forum.xda-developers.com/showthread.php?t=1517939) and the new baseband yesterday night and the phone was working fine. But when i went to sleep the phone had about 25% charge so in the morning it was switched off. Here's what i've done
-I have charged my phone for an hour now via usb/ac adapter and tried removing the battery , sdcard and putting it back in ( some post said to try it) but still the phone doesnt switch on.
- All it shows is the battery indicator when switched off (the really big one being charged) and about 50% is done.
-That screen comes on even if i press and hold power button
-Not able to go into recovery
Anyone any ideas????
Click to expand...
Click to collapse
well battery drain has been the biggest issue in miui rom as it doesnt get into sleep mode so the soultion just put ur phone in charging for some time on plug socket not via pc .
now use adb to boot into recovery using command or just press the 3 button combo home+vol down+ power and check if it loads into recovery if not than adb is best method to boot into recovery ,
your bootloader is corrupted.. if you can somehow made it to emergyency mode then the situation is undercontrol.. if u can't then take your fone to cc
Sent from my LG-P500 using xda premium
SOLVED
Thanks for the replies guys. You were right. I manual forced emergency mode . Now repairing.

[Q]Can't boot xperia x10 mini pro in flash mode and can't back it to stock ROM

Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol

[Q] Xperia GO Battery

Hi! Can someone guide me into removing or getting access to the battery of this unit. I think the kernel is corrupted coz I think I flashed the wrong one. The battery drained out. So without a working kernel, I cant charge the phone. Even in USB to PC or directly to wall charger. I want to re-insert t the battery to see if that fixes the issue.
Can someone tell me if removing the battery then plugging in the usb without the battery if I can enter flash mode or flash boot to be able to flash the correct kernel or go back to stok room for the phone? Would that work?
Or I just need to reinsert the battery then try to enter flash mode?
SITUATION:
- cant enter flash mode or fast boot.
- can hard reset (Power + volume+)
- Cant turn on the phone
-just red led when plugged in then disapperas after a few minutes (not charging)
- the phone never got wet or never been dropped. (so im hoping this is a software issue)
- phone is rooted, unlocked BL with CWM.
-started when I flashed a flshable version of CWM touch version to upgrade from version 5 to 6.
Help please. Im thinking of opening the phone to access the battery.
The idea of removing non-removable battery is not the best one, unless you really know what are you doing - and i don't think you know it.
And i think this won't help you, really not.
eclpsues said:
SITUATION:
- the battery drained out
- can hard reset (Power + volume+)
Click to expand...
Click to collapse
You can hard reset - but battery is drained?
Once, i had problem like this one, but i managed to get into fastboot and re-flashed right kernel.
What were you exactly doing? Rooted and BL unlocked Go? What and how were you flashing (which rom and kernel were you flashing)?
Sent from my XGO using fingers
MyWnm said:
The idea of removing non-removable battery is not the best one, unless you really know what are you doing - and i don't think you know it.
And i think this won't help you, really not.
You can hard reset - but battery is drained?
Once, i had problem like this one, but i managed to get into fastboot and re-flashed right kernel.
What were you exactly doing? Rooted and BL unlocked Go? What and how were you flashing (which rom and kernel were you flashing)?
Sent from my XGO using fingers
Click to expand...
Click to collapse
sorry just a typo error, i mean i cant hard reset. I know how to access an embedded bat, tried it before with Xperia S. but I was hoping if can flash without doing that anymore?
Managed to disconnect and reconnect the battery; however I still cant turn it on, or even hard reset, or flash mode or fast boot. Crappppp! help. What can I do to bring this phone's life back. I flashed an update for CWM on recovery. Thats when this problem started.
any help out there?
Same problem
eclpsues said:
any help out there?
Click to expand...
Click to collapse
Hi, i am having the same problem. I flashed the kernel for another model out of noobness. So removing the battery did not help at all?
OMG right as i was typing this, the rubber band trick worked and i accessed fastboot and flashed another kernel. It wont start for now, but maybe the battery needs to be charged for a while (red led). In case you dont know (if you still have this problem), i will explain what i did (the computer just detected the device, so i think im in the clear):
1) get a rubber band and put it around vol up button (this is for fastboot; for flash it would be vol down)
2) plug the phone to your computer
3) get the fastboot.exe file (google)
4) put the correct boot.img file (or kernel, i flashed the wron boot.img, so i did it this way. I dont know what the difference is) in the same folder as fastboot.exe
4) open command prompt, go to the fastboot folder (look up commands)
5) type in "fastboot flash boot boot.img"
6) the cmd will say "waiting for device..."
leave it like that; i got purple (i guess blue plus red) led after awhile and fastboot flashed the kernel.
I will keep you informed on success or failure.
EDIT
It worked, i have a running phone.
Hey! Thanks for the post and reply, would have done that. However, i sent my phone to a repair center, and they havent got bakc at me until now, its been 3 weeks.
Was your phone unable to go fastboot and flashmode too before? And when you charge it red led appears then goes away after a few minutes? My PC cant recognize the phone, the only indicator i had was the red led when plugged in which goes away after a couple of minutes.
How long did it take for the phone to enter fastboot? Coz, I've tried holding the button (Vol+) for almost 5 minutes and nothing happens.
Can you provide me the exact situation you had? and the clear cut steps you took to fix it? Especially how many minutes for it to go to fastboot with the rubber band on?
TIA!
@ madismet
your rubber band technique actually worked!! thanks a lot!
I was just about to give up on my xperia go, when I came across your post...
thanks!! :good:
how long did it take to enter fastboot?
eclpsues said:
Hi! Can someone guide me into removing or getting access to the battery of this unit. I think the kernel is corrupted coz I think I flashed the wrong one. The battery drained out. So without a working kernel, I cant charge the phone. Even in USB to PC or directly to wall charger. I want to re-insert t the battery to see if that fixes the issue.
Can someone tell me if removing the battery then plugging in the usb without the battery if I can enter flash mode or flash boot to be able to flash the correct kernel or go back to stok room for the phone? Would that work?
Or I just need to reinsert the battery then try to enter flash mode?
SITUATION:
- cant enter flash mode or fast boot.
- can hard reset (Power + volume+)
- Cant turn on the phone
-just red led when plugged in then disapperas after a few minutes (not charging)
- the phone never got wet or never been dropped. (so im hoping this is a software issue)
- phone is rooted, unlocked BL with CWM.
-started when I flashed a flshable version of CWM touch version to upgrade from version 5 to 6.
Help please. Im thinking of opening the phone to access the battery.
Click to expand...
Click to collapse
Check this out. It's explained in pretty detail here.
hxxp://xperiagobattery.blogspot.in/2014/11/how-to-change-xperia-go-st27i-battery.html

xperia p no charging lights, no usb detect,does not boot (not even the kernel screen

hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
WizaJ said:
I think you've posted in the wrong forum - should be in Q/A.
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi.
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow. Google a lot to learn how it works, the wires, what is positive and negative and bla bla bla because your biggest problem NOW is not having power to work with the phone.
Hope you have good luck!
=)
Sorry please post your thread at Q&A
Devin-J said:
hello everybody,
i used to be active on the x10 forum.
but recently i switched to xperia P.
i unlocked the bootloader,
used fastboot to flash custom boot.img,
fastbooted custom kernel (FreeXperia),
installed cm10.zip with the CWM included in kernel,
everything works except wifi and bluetooth (which i guess is the rom's fault, so i dont really mind)
and then i installed apps from the cm10 file manager.
it detects my 16gb internal memory.
but my titanium backup and some other apps says it cannot access my internal memory, so it doesnt show any apps. (usb is disconnected)
so i thought mayybe some apps dont have access, so i thought i should mount my internal memory (although it already works for my cm10 file manager).
that was a very stupid decision because i used this code from this website which i got after i googled and used it on my terminal emulator.
guess what happened? my device got stuck/hang/frozen.
then when i pressed the power button, it was totally blank, no response and the screen went off.
i tried force shutdown by pressing and holding the volume-up & power button at the same time for a long time, that didnt work either, it had no effect, there was not even a vibration.
and when i charge it, there is no charging light.
it doesnt boot, it doesnt show me the kernel screen, or the CWM screen.
this is worse than a bootloop.
anyone who has previous experience with this?? or has a suggestion on how to repair?
any advice will be much appreciated :crying:
Click to expand...
Click to collapse
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
if you have any problem PM me.
sorry for my english.
WizaJ said:
Is your phone able to detect in flash mode? (while it is off, hold DOWN volume key and connect USB - check for LED illuminated)
Is your phone able to detect in fastboot mode? (while it is off, hold UP volume key and connect USB - check for LED illuminated PURPLE)
Click to expand...
Click to collapse
the phone doesnt respond to anything
aftergr said:
looks like you have to shut down your device first IF it is not shuted down
http://forum.xda-developers.com/showpost.php?p=42270725&postcount=798
Click to expand...
Click to collapse
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
zilian28 said:
1. Have you tried to charge it through the charger, instead of the usb por of PC?
2. If you tried, did you let it charge for at least 30 minutes? (Sometimes the battery drains so much that the phone needs time even to show it´s charging.)
If the battery charges, you should try flashing a Stock Rom through Flashtools.
If it doesn´t, then I can´t say you should do it but if I were in ur position, I would surely open my phone and try to charge this battery somehow.
=)
Click to expand...
Click to collapse
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
Xperia_Fans said:
Sorry please post your thread at Q&A
Click to expand...
Click to collapse
sorry, i moved it there
copper62472 said:
Hi my friend.
i had this problem 6 month later
it happened because battery is 0% i opened its back door and use a special charger that can be use to charging any battery ( has 2 wire to connect to any battery ) after 3 min charge ( to charge i disconnected battery socket and connected wires to socket) i connected battery and close back door and go to flash mode and flashed stock rom.
and Done.
Click to expand...
Click to collapse
thanks, you give me hope. so what equipment did u use? i'll pm u
In my opinion ders something wrong with the partitioning when you entered the command....
Try looking into that direction.
Im no expert just a suggestion...
Devin-J said:
the phone doesnt respond to anything
i have reason to believe it maybe related to the battery. maybe the battery is still running. how do i physically shut it down? the holding power button and volkume-up button trick doesnt work.
i tried plugging it in for hours, no response. could you tell me what equipment do i need to remove the casing and charge the battery?
sorry, i moved it there
thanks, you give me hope. so what equipment did u use? i'll pm u
Click to expand...
Click to collapse
Use this guide to open the phone up and just disconnect the battery for a few minutes. Then try connecting in either fastboot/flash mode. The phone may need to be repartitioned and reflashed.
Same issue
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Help
schmeißfliege said:
Hi Davin-J
Did you finally solved this problem? I have the same now. And my battery should be good.
...............................
1/2 day later:
It was the battery. I managed to get it back to life as copper62472 told us. The strange thing was, that the Sony charger didn't charge the phone battery; may be because I bricked the phone before with system/data/cache wiped and formatted. I was not even able to restore it with SUS, because the phone was not detected at the USB.
Then I charged the battery outside the phone with a current limited power supply. After putting the charged battery back into the phone, restoring with SUS worked without a hitch.
Click to expand...
Click to collapse
My xperia p is also in dead condition now. I'm thinking like it's battery is fully drained. It all started with flashing of a custom kernel.
i could take the battery out. i need to charge it by external means. How can i do that? Please help me.

Red flashing light

So my phone was in bootloop and i tried to flash new room (stock one) after that phone died (due low battery) and now i cant trun it on :/ only red flashing light apear when i conect it to pc/wall charger and still cant turn on i tried that someone said to let it be for 10 mins after that to hold all keys (volume up + down + power) to calibrate power cell but still no luck.
I have another one htc onex+ but for that i fixed my issue if only i could turn it on so i can get into bootloadeer run my script to charge battery for a bit and then flash right room and install stock room.
Realy please help me out here.
i realy need help
Btw phpne gets warm when i stcuk it in charger but no responsse at pc side so cant realy do anything from pc right now.i just need a way t turn it on
Try with a normal charger.
tapatalked

Categories

Resources