Download stock CyanogenMod kernel
What is it?
It is a flashable ZIP containing zImage and wireless.ko extracted from cm-7-20120701-NIGHTLY-p500.
It is not compiled.
It is completely stock CyanogenMod kernel.
Who is it targeting?
Users of CyanogenMod (or CyanogenMod-based) ROMs that tried alternative kernels and now want to go back to the stock kernel.
Download optimized CyanogenMod kernel
Regular version | Extra version (with TUN and CIFS modules)http://www.mediafire.com/?efgv63eq614zn2ohttp://www.mediafire.com/?efgv63eq614zn2o
What is it?
It is exactly the same as CyanogenMod kernel, but compiled without some debug functionalities.
End users do not need them, and removing them makes the kernel smaller and may increase the speed a little bit.
This kernel should behave just like the CyanogenMod kernel and should have exactly the same functionalities. (in case it doesn't, please let me know )
Additional version with extra modules included - tun.ko and cifs.ko.
Who is it targeting?
Satisfied users of the stock CyanogenMod kernel that may want a little increase in speed and/or some functionality provided by the extra modules included, but do not like fancy modifications in kernels.
I need feedback and suggestions on the optimized kernels. Thanks in advance!
Nice one, could become handy to have a flashable stock CM kernel WITH wireless.ko.
Just a suggestion: You should enable the CONFIG_IKCONFIG option so that one can check which options you have configured in the kernel.
Also could not harm to have the tun.ko module as well (CONFIG_TUN), if needed for VPN connections.
Added versions with TUN and CIFS modules.
Flashed this, all seems good currently, great work
Also, this patch supposedly fix call reboots. Worth a try?
Cresqo said:
Also, this patch supposedly fix call reboots. Worth a try?
Click to expand...
Click to collapse
The latest sources already have fixed the reboot on incoming call.
Sent from my LG-P500 using XDA
> can i flash it over nightlies?? EKkkk!
> that's the most stupid question you'll ever here l.o.l
> this is great, many user are searching for this.
Updated the optimized kernels.
yuripg1 said:
Updated the optimized kernels.
Click to expand...
Click to collapse
What changes are there?
Sent from my LG-P500 using XDA
Cresqo said:
What changes are there?
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
This time I disabled the "optimize for size" option and also checked another option to strip symbols.
When I have time I'll do a better research on that, but it's funny that all these changes in v01 and now v02 don't seem to change much in the benchmark I tested (AnTuTu Benchmark - only "CPU and memory", "2D graphics" and "3D graphics" tested).
In the worst case scenario I'll use this thread to publish only the latest stock CyanogenMod kernel to those who want to get it back.
Researched some more optimizations and built a new version. Now only one kernel already with the extra modules (TUN and CIFS). And it's getting harder to discover new optimizations.
Thx for your extra version with tun module, i flashed this kernel and openvpn work now with cyanogen rc1
Updated all three kernels. Enjoy!
Thanks, this is what I want.
I feel CM official kernel is the most stable and smooth!
After one hour use the optimized version, i feel that my phone has became smoother!
Sent from my LG-P500 using xda premium
This time I slightly broke my promise of not modifying the code of the optimized kernels.
I applied one change from LG's newest souces (V20A for LGP500H) that seems related to the behaviour of the phone when the screen is turned off (I'm not 100% sure).
https://github.com/yuripg1/lge-kernel-msm7x27/commit/ea2157b140ecf79530f33a214e38b48204c39e2b
I don't know exactly what problem it is supposed to fix, but it seemed safe to apply this patch to the kernel.
I also tried it by myself a little before releasing it and so far it's doing fine.
Sent from my LG-P500 using XDA
Once more, all three kernels up-to-date!
Thanks for keep working!
Hello
I have tried Extra version, there is no TUN inside please check.
fitztu said:
Hello
I have tried Extra version, there is no TUN inside please check.
Click to expand...
Click to collapse
I just downloaded it [here] to check and there is indeed a tun.ko file on the /system/lib/modules/ directory.
Check again, buddy.
Related
---NEW KERNEL THREAD---
This kernel is based on Hardcore's SpeedMod K1-T30 Kernel
Why another kernel?? Because I can, I like the challenge and I can probably do it as well as any other?
Features:
support for SetCPU OC (upto 1400MHz)
UV between 800mV and 1400mV
support for Boot Animation
support for BLN
SpeedMod K1-T30 initramfs + boot animation
SpeedMod K1-T30 kernel source patches
Samsung Update 2 Applied (as per K1-T30
CIFS working
Charging touch sensitivity fix.
The goal of this kernel is to take the battery savings gained from HardCORE's kernel and allow undervolting and underclocking to further improve battery life. I added Boot Animation and BLN support just because I could.
As usual, this kernel could break your hardware, so only flash if you are not concerned with bricking your device.
That said, I have flashed this kernel on my device and it still works.
Thanks also to the authors of Ninphetamine kernel - their SetCPU supporting code was the basis for the SetCPU support in this kernel, I have also used BLN code from their Git Repository, thanks to creams.
Change Log:
v1-T26 - public release based on SpeedMod K1-T26
Added BLN support
Added SetCPU support
Added UV support
Added bootanimation support
v1-T27 - updated base to SpeedMod K1-T27
v2-T27 - updated base to Samsung Update 2
Same feature set as previous versions
CIFS working
Closest match to SpeedMod K1-T27 but with Samsung Update 2 sources
Touch sensitivity fix from ninphetamine.
v1-T30 - updated base to SpeedMod K1-T30
Same feature set as previous versions
Future plans:
Keep up with SpeedMod current releases as they happen and source patches are released.
NOTE FOR ALL:
Patch files are for developers, not end users.
Source patches attached for developers - apply against Samsung Update1 sources.
Source patch for v2-T27 and newer to be applied against Samsung Update2 sources.
Gonna try this for sure , always loved Hardcore kernel, back in the Gti9000 times, but i think that OC/UV is something missing in his kernel. I'll report when i'll have tried it out ^^. Thanks !
nice.. waiting for you to update to t26..then will give it a go
OMG something happened in Adelaide!
robt772000 said:
OMG something happened in Adelaide!
Click to expand...
Click to collapse
Typical Victorian!!! Oblivious to the rest of the world.
Good to see many Kernel developers coming on board
May be its time to disclose the sources and GPL as other KERNEL threads being locked for want of it.
Other developers whose initial thoughts/ideas was reused will benifit everyone if what you have achieved over and above will make the original Kernel even more robust
rbalu72 said:
Good to see many Kernel developers coming on board
May be its time to disclose the sources and GPL as other KERNEL threads being locked for want of it.
Other developers whose initial thoughts/ideas was reused will benifit everyone if what you have achieved over and above will make the original Kernel even more robust
Click to expand...
Click to collapse
I fully intend on posting a patch file, just not at a computer where I have access to my sources!
First - thanks for this project!
Second - I tried your kernel and I have had some problems with haptic feedback on my phone, it doesn´t work.
Edit: I´m on Darky base XXKH3..
vanahaim said:
First - thanks for this project!
Second - I tried your kernel and I have had some problems with haptic feedback on my phone, it doesn´t work.
Click to expand...
Click to collapse
Thanks for that, I didn't even notice that Haptic feedback wasn't working!
Great work !!
Just tried it and No problem so far.
Wait for your next update, based on Hardcore's SpeedMod T26
cheers
Works great for me, too!
Just as already mentioned above haptic feedback isn't working, but I don't use that anyway.
I guess this kernel is in the wrong section. Although I do admit that this requires far more skills winzipping a rom together, this is basically a matchup of ninphetamine and speedmod, and therefore has nothing to do with original rom development.
Well, it's not a cut and paste coding job if that's what you're implying, I studied the required code from Niphetamine and implemented it (but reduced speed limits and subsequently speed steps) in the source for SpeedMod.
IMPORTANT: all vibration not working in first beta. Will fix and repost. Sorry, but it is a beta!
Sent from my GT-I9100 using XDA App
If you can please mod the T26 to add these futures: Bootanimation,BLN, OC and UV. Very ngood to see more and more kernel options available. Thanks for your work man
My thread is locked
....copy/paste
RAvenGEr said:
Well, it's not a cut and paste coding job if that's what you're implying, I studied the required code from Niphetamine and implemented it (but reduced speed limits and subsequently speed steps) in the source for SpeedMod.
Click to expand...
Click to collapse
Can't code for toffee, wondering how difficult it is to alter said limits/steps and put them in another source?
Genuinely curious - doesn't sound tough, I stand to be corrected and/or educated.
B3311 said:
Can't code for toffee, wondering how difficult it is to alter said limits/steps and put them in another source?
Genuinely curious - doesn't sound tough, I stand to be corrected and/or educated.
Click to expand...
Click to collapse
I would not say it was difficult, but I have been coding for 10+ years in many languages.
teksin said:
My thread is locked
Click to expand...
Click to collapse
Maybe you should have listened then.
My new kernel!
Will come in two flavours:
U1 - based on Samsung Update1
U2 - based on Samsung Update2 - Canceled due to release of Update3 sources!
U3 - based on Samsung Update3 - in progress
Features:
support for SetCPU OC (upto 1400MHz)
UV between 800mV and 1400mV
support for Boot Animation
support for BLN
The goal of my first kernel was to take the battery savings gained from HardCORE's kernel and allow undervolting and underclocking to further improve battery life. I added Boot Animation and BLN support just because I could. This kernel adds to my previous kernels, taking bits and pieces from here and there also.
As usual, this kernel could break your hardware, so only flash if you are not concerned with bricking your device.
Thanks also to the authors of Ninphetamine kernel - their SetCPU supporting code was the basis for the SetCPU support in this kernel, I have also used BLN code from their Git Repository, thanks to creams.
Change Log:
U1 - v1.1 - based on Samsung Update 1
New compiler optimisations - partially from SpeedMod, partially my own.
U1 - v1.1a - minor update release.
Increased touch sensitivity
U1 - v1.1b - minor update release.
Init.d support
Future plans:
Auto Root-ing
Auto install modified liblights
U3 version.
Git Repo Online
Get your sources
HERE
Yeah baby
Good job rage! Keep it up! Nice kernel anyway.
Sent from my GT-I9100 using xda premium
hellz yeah bro!
good work!
congratulations for your excellent work
installed, running at 1400 ok, haptic response s more reliable,
awaiting feedback
speedmod base that takes?
YEAH!!!
Finally it is released!!! ><
thanks ravenger. keep on update.
Awesome! Trying it right now.
Sent from my GT-I9100 using XDA Premium App
differences from this one to v1-t27?
Sweeeeeet! Have been hanging out for this - cheers man!
Thanks!! Nice kernel, downloading
Maybe do a special DK version for upcoming GadgetCheck DK Themed Infusion 2.5 Rom
Sent from my GT-I9100 using xda premium
thanks, gonna flash this tonight when i get home. Is this the same as the other ragemod thread only this is the "non-beta" version instead?
based on T39 ?
Ravenger if you can provide more info about this kernel compared to v1 T27 or v1 T30 would be very appreciated. Thanks
Not being able to flash the Kernel, the entire process Odin hangs in the middle. Tar seems currupt. zImage is only 3.20 mb.
Thanks.
jsbutran said:
Not being able to flash the Kernel, the entire process Odin hangs in the middle. Tar seems currupt. zImage is only 3.20 mb.
Click to expand...
Click to collapse
Flashed fine for me ?
darrenjdoc said:
Thanks.
Flashed fine for me ?
Click to expand...
Click to collapse
Thanks. Somethin went wrong with my download Manager. Its all OK now. Thanks again.
Thanks for the kernel, there seems to be something wrong with clockworkmod as it doesn't mount usb storage and also installing zip from it doesn't do anything (ie. theme or whatever).
Previous kernels and others work no problem.
Keep up the great work!
edit: ignore.. sorry, reflashed kernel after flashing other kernel and all working fine now
Unlocking Bootloader voids your warranty however you can relock the bootloader!!! Please think about what you do before reading on
Great kudos to the_laser, his original thread is here : http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3
Requirements:
at least Froyo or Gingerbread Android
unlocked BootLoader
same Baseband as for any custom rom
Instructions:
How to Lock and Unlock the Bootloader : Thread by Spyder-X with Instructions
Please make sure to delete the following modules if present in /system/lib/modules/ this is really important otherwise phone might reboot due to unloading adresses have changed : delete x8oc.ko, x8uv.ko, cyctma300_ser.ko, x8mddi.ko, ext3/4.ko jbd(2).ko or mt.ko
except OC everything is already in Kernel, please do not try to insmod current x8oc/uv module needs to be recompiled with new addresses
unpack the Kernel zip and place ftf file in firmware folder of flashtool
select flash and choose ZombiePanic
flash like usual
Features
no touchbug with GB roms
Tun/Tap
Overclocking (and undervolted)
built in Multitouch
mddi patched!
netfilter
iptables/xtables
ASHMEM/PMEM/SHMEM
EXT3/4 JBD(2)
USB RNDIS/RMNET (one step closer to native USB Tethering)
partial USB Host Side (not yet fully working)
alot more filesystems supported (CIFS,CD_ROM ISO,etc.)
few performance tweaks on performance govenor, smartass would be nicer maybe next time after i get permission
Bugs
none known so far
Download
Again you do this at your own risk!
Download ZombiePanic Kernel v1.63
At the Moment I advise to not use Overclocking as I still need to patch some PLL values which means OC maybe slower than set to 600 MHz
Download Zombie Panic Extreme Edition
Warning: Do not use if you are a regular user, its for hardcore overclockers. Zombie Panic Extreme Overclocking Edition be careful with Overclocking!
Features:
- upto 864 MHz with patched PLL
- features (and maybe bugs) from ZPKernel v1.61 integrated .
might be unstable with higher frequencies!! be careful do not set cpu speed on boot while checking frequencies
I am not responsible for bricked devices. Do at your own risk.
Download Zombie Panic Extreme Overclocking Edition
Code:
v1.63
-worked on overall snappiness, system should react faster overall
v1.62
-for me stable again. sorry about reboots it was caused by "fixed" touchdriver, i have rewritten some part and now its fine again! (also running super user v3 without issues so far)
v1.61
-found the issue on stability/performance loss (in acpuclock.c)
v1.59
-improved stability (a nat settings was causing a few issues)
-performance in booting might be a bit better
v1.58
-fixed swiping issue in touchdriver from the right or the bottom while finger was "outside" the screen
v1.57
was a debugging version not released to public in order to rewrite most part of dual touch driver
v1.56
-sorry it was late, i forgot to revert two lines in camera now everything working again like it should fixed v1.54/v1.55 camera issue.
v1.55
-fixed video cam driver from v1.54
v1.54
-some clean up
-improved touchscreen driver a bit
-integrated Tun/Tap
-disabled all unncessary debugging
-again a slight increase in performance and boottime
-real cpu overclock not yet finished
v1.52
-integrated smartass conservative/ondemand governors and can be selected
in cm or setcpu settings [B]full credits goto AnDyX[/B] his
original Thread is [URL="http://forum.xda-developers.com/showthread.php?t=1159899"]here[/URL]
-worked again a little on kernel ramdisk
-new boot logo [B]credits go to Mr.Krypton!! thank you very much[/B]
-enabled GPU KGSL per Process caching might improve 2d/3d performance
v1.51
-all changes from v1.4 now implemented
-partial clean up on kernel ramdisk, next step no chroot anymore
-wireless working
v1.5
-reverted link back to 1.3 wireless works here, wireless issue i'll take a look again
v1.4
-patched lightsensor now should never return illegal value -1 so no automatic brightness bug
-some what patched multitouch to be a less pain in the ass while zooming
v1.3
-full overclocking support kernel wise should also reduce jiffy lags
-new custom logo for this version ;) if anybody wants to make a better one please let me know
-included mddi fully (ESD_Recovery lag should be gone)
-included small patch for light sensor (not yet finished) to not report illegal light value -1
v1.2
-full iptables support also with DroidWall
-partial NAT support
-almost done with Overclocking in Kernel
v1.0
-inital release
credits to the_laser,zdizhu, jerpelea, Bin4ry, Blagus ,azuzu, AnDyX,Mr.Krypton and everybody else involved in unlocking the bootloader
https://github.com/slade87
This Kernel is not using FXP or other sources, i started from scratch with SE kernel 492.
no need with Kernel v1.2
Just in case anyone wants to use DroidWall which uses one xtable module as well which is netfilter owner, extrace the zip file and put on /system/lib/modules/xt_owner.ko
edit hw_config.sh in /system/etc/ at end and include this line:
insmod /system/lib/modules/xt_owner.ko
and droidwall is working like it should.
next kernel will have this also included.
Great work mate!. Im working on preroot kernel you should also include it.
Btw, can you share sources for use some things, thanks.
edit: if you want a initlogo, send me ramdisk + png, and ill send you back modded initlogo
Great work mate!!! don't want to get off topic, and sorry if i do but is there a chance to get a version for x10 mini too???
My regards,
Ribben
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Work together please and make a fabulous kernel for our devices.
Why not Team487 lol?
Sent from my LG-P990 using XDA App
Go to this thread for instructions on gow to unlock the bootloader on your phone and verify that your bootloader unlock was successful.
Link: http://forum.xda-developers.com/showthread.php?t=1254225
Cheers ,
SpyderX
Please x8 version.
Sent from my X8 using Tapatalk
Slade, I noticed that the included iptables has no NAT support?
D4rKn3sSyS said:
Great work mate!. Im working on preroot kernel
Click to expand...
Click to collapse
Azuzu is working on that.
Sent from my U20i using xda premium
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
darrie1 said:
My touchsreen isnt working anymore after flashing this kernel
im on stock se 2.1.1.c.0.0
can someone help me?
Click to expand...
Click to collapse
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Snoopo said:
Mate, you should be able to help yourself in such case, before doing that boot loader/kernel thingy :/ you also could have provided more info...
well, first steps I think::
1) if your touchscreen is only working WEIRD I guess you just have the power cable plugged in... unplug it, wait few seconds and then your touchscreen should response as usual. otherwise ref lash default se kernel...
2) if touchscreen does not work anymore... well flash default kernel and wait or build own custom kernel
Click to expand...
Click to collapse
i dont know what you are trying to say in your first sentence but the screen didnt respond not weird so ive flashed d4kernel
but anyway thanks for reply
slade87 said:
Delete cyctma300_ser.ko from /system/lib/modules multitouch is in kernel module only causing issues
Sent from my U20i using xda premium
Click to expand...
Click to collapse
before flashing your kernel i updated with SEUS so i didnt have mt module,
i hope next version will work
slade87 OC Does not work
Eyama said:
Nice this custom kernel have alot of featurescant wait for the governersgreat work slade87
EDIT(OFFTOPIC): slade87 and D4 you should now start so help eachother on custom kernel.this is new on our device and you two are genius so keep up the good work
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Stop compairing Slade to d4rk!
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
I don't think that was eyama point---
@slade hi bro thanks given
Peace
Sent from my Xoom MZ604 using xda premium
terrormattie said:
Stop compairing Slade to d4rk!
Click to expand...
Click to collapse
As kormatoes said, he didn't mean that. I wonder how you came to this conclusion...
He just said his opinion which was Slade and D4 to cooperate.
update to kernel 1.2
slade87 Thank you. you need to refine multi-touch.
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i
Thanks to XperiaSTE team for the overclock kernel source first. I just did the config and compile but nothing else.
This kernel will overclock your device to 1.15GHz. The overclocking will provide a better performance and a smoother user experience.
I'm using a kexec multiboot kernel on my device, so I didn't test the kernel packed as elf format. It should be good because I have done flashing the self-built kernels several times.
The overclock source doesn't seems to be the latest but everything works~ Maybe that's because the modules in initramfs? (I did nothing to initramfs)
It's nearly impossible for me to upload the kernel on something like devhost/mediafire, so sorry for that. Could someone upload it on these sites please?
V2 Changelog:
1) Use GCC 4.9 Linaro to compile.
2) Change the SLQB allocator to SLUB. I don't really think SLQB is stable.
3) use 2G/2G user/kernel split. It seems to have a better performance.
4) PID namespace
5) NOTE:NO recovery in V2! Instead of recovery, the kexec multiboot menu by @percy_g2 is added. Big thanks to percy_g2. For how to use it, see Link:http://forum.xda-developers.com/xperia-u/p-development/kexec-multi-boot-menu-t2647623
* To enter boot menu you should press the power key when vibrate
V2 Link: http://pan.baidu.com/s/1mgt82V2
V1(Stable) Link: http://pan.baidu.com/s/1kTyul07
Finally, sorry for my poor English
Hope you like the kernel~
zhy0919 said:
Thanks to XperiaSTE team for the overclock kernel source first. I just did the compile but nothing else.
This kernel will overclock your device to 1.15GHz. The overclocking will provide a better performance and a smoother user experience.
I'm using a kexec multiboot kernel on my device, so I didn't test the kernel packed as elf format. It should be good because I have done flashing the self-built kernels several times.
The overclock source doesn't seems to be the latest but everything works~ Maybe that's because the modules in initramfs? (I did nothing to initramfs)
It's nearly impossible for me to upload the kernel on something like mediafire, so sorry for that
Link: http://pan.baidu.com/s/1kTyul07
Finally, sorry for my poor English
Hope you like the kernel~
Click to expand...
Click to collapse
hi, first of all big thanks for the kernal!!
can u provide a changelog or something like that to show the difference between cm11 kernal and your kernal ???
is overclock the only added feature in this kernal?
thanks and i wish you support more!!!
vicky2131 said:
hi, first of all big thanks for the kernal!!
can u provide a changelog or something like that to show the difference between cm11 kernal and your kernal ???
is overclock the only added feature in this kernal?
thanks and i wish you support more!!!
Click to expand...
Click to collapse
Thanks for your support!
by doing diff -u to the two xperiap_defconfig, the configs seem to be same.
So XperiaSTE did nothing more to the overclocked kernel.
therefore the config isn't changed and the only change is in the code.
Doing diff to the whole source tree will take much time so i didn't do it
By the github commit the changes seem to be all related to overclocking.
https://github.com/XperiaSTE/android_kernel_sony_u8500
you can read cm-11.0 and overclock branches's commits
Omg, finally oc kernel for cm11! Can i use this kernel for miui v5 kk 4.4.4 by kosmos?
kopter3161 said:
Omg, finally oc kernel for cm11! Can i use this kernel for miui v5 kk 4.4.4 by kosmos?
Click to expand...
Click to collapse
CM11Overclock_Fandroid-MIUI https://yadi.sk/d/kn4Gv5wXaP7Qj
Is this kernel stable? And can I use this in Europe?
Thanks for the kernel!
Just a suggestion for anyone thinking about flashing it right away:
Wait a couple of days/weeks for someone to do some testing, you could fry your motherboard (happened to me on my previous 2 phones).
I'm not saying this kernel will do that, but it's just a precaution.
mrdjibrilo said:
Thanks for the kernel!
Just a suggestion for anyone thinking about flashing it right away:
Wait a couple of days/weeks for someone to do some testing, you could fry your motherboard (happened to me on my previous 2 phones).
I'm not saying this kernel will do that, but it's just a precaution.
Click to expand...
Click to collapse
using from mornin!!!
no issues!!
vicky2131 said:
using from mornin!!!
no issues!!
Click to expand...
Click to collapse
It's a small time period, understand me please
I was running OC kernels on my previous phones and the motherboard frying happend months after use,
I'm not saying that this is the situation with this specific kernel, these are just my previous experiences,
and it was just to warn people
I had ever used panthom kernel on stock jb, it used 1.15ghz too but still safe used for a long time..
thanks for the great work.but how to install multi rom on our phones?
If anyone has a problem downloading the kernel from baidu, I have made a mirror on dropbox:
https://www.dropbox.com/s/gxuw8o8jtllzmfi/CM11Overclock_Fandroid.elf?dl=0
Ofcourse with the permission from the developer
Can someone please explain steps for installing multiroms? Can I use cm11 along with cm10?
Would the existing cm10 need to be reinstalled?
I've given link in the thread
No reinstalling is needed
Sent from my Xperia P using XDA Free mobile app