Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
3.2r1 -> 3.3 changeset
- change smartass codes and tweak
3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot
3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
Strongly recomand "Ondemand" governor
it's smoothest
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Next Kernel will be change to base on CM7 Stock kernel
Happy new year!!!!!
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot
Wipe dalvik-cache after update
KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD
Dude, you know how to catch us
Testing it now...
Sent from my Nexus One using Tapatalk
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
what governor works best?
Markdental said:
what governor works best?
Click to expand...
Click to collapse
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
How install it? Should i put the zip on the SD card and install it in the bootloader?
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
Click to expand...
Click to collapse
thanks
Markdental said:
what governor works best?
Click to expand...
Click to collapse
i strongly recommand ondemand
bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
Click to expand...
Click to collapse
smartass is bad working on my kernel
strongly recommand ondemand
giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?
Click to expand...
Click to collapse
update on recovery mode
cpm said:
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i tried to add smartassv2 but it has some problem
sorry
texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
Click to expand...
Click to collapse
that's very interesting
if you provide kernel source,
i'm try to build kernel
revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Click to expand...
Click to collapse
alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
Click to expand...
Click to collapse
it's little change
added Improve SDHC card stability on r1 version
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
kgp700 said:
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
Click to expand...
Click to collapse
need to wipe dalvik cache too right?
alisabki said:
need to wipe dalvik cache too right?
Click to expand...
Click to collapse
recommand that
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
Click to expand...
Click to collapse
yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
DaxElectro said:
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks!!
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
Click to expand...
Click to collapse
4 hours with lastest kernel (r2) and Wifi ON. No problems at all.
Hello everybody.
I have a Hannspree Hannspad, which is similar to the G Tab.
Currently I am Using Flashback 10 with a kernel provided by fards and edited by me.
Here on Github:
https://github.com/Gott/ab73kernel-Hannspad-2632
Unfortunately, I cannot set the CPU Governors in apps as SetCPU, Antutu Cpu Master, or else.
The fields for setting the governors are just blank.
When I check the files in /sys/dev/system/cpu/cpu0/cpufreq/scaling_governor
there is no file.
there is a /sys/dev/ but nothing else.
Can you tell me what is wrong?
I set the Governor in the kernel config, as well as the scheduler (noop).
Furthermore, the Interactive and Conservative Governor do not work.
The tablet simply does not start.
It hangs on the Hannspree logo, before the Flashback logo (Framebuffer dummy driver).
lordofazeroth said:
The fields for setting the governors are just blank.
Click to expand...
Click to collapse
That kernel looks like a pershoot-derived kernel which has the ondemand governor compiled in as the default; and, you don't need to change it which is why the /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors file will read blank.
When I check the files in /sys/dev/system/cpu/cpu0/cpufreq/scaling_governor
there is no file.
there is a /sys/dev/ but nothing else.
Click to expand...
Click to collapse
That's the wrong directory. It's actually: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
Thanks.
Do you know if the Interactive or Conservative are working in the pershoot kernel?
If compiled, my tablet is not starting any more.
I thought about implementing another governor, as I think, ondemand clocks up too fast.
lordofazeroth said:
If compiled, my tablet is not starting any more.
Click to expand...
Click to collapse
How did you enable those governors? By editing the defconfig file manually or using make config/menuconfig/xconfig?
I thought about implementing another governor, as I think, ondemand clocks up too fast.
Click to expand...
Click to collapse
Not sure if it'll do what you want. See this question and pershoot's answer in the next one.
I currently use xperia active ICS with stock rom and kernel. Does anyone know how to apply SmartassV2 governor in my device?
Use custom kernel.
Stock kernel doesn't support various governor
Sent from Hubble Telescope
pojhe said:
I currently use xperia active ICS with stock rom and kernel. Does anyone know how to apply SmartassV2 governor in my device?
Click to expand...
Click to collapse
you can't. You need a custom kernel to do that
Is there any way to port these governor to stock kernel? because I don't want to unlock bootloader for the sake of warranty.
Then stay with your precious warranty and forget about smartassv2
Imho amongst stock governor in stock kernel, interactive is pretty good.
What's the best CPU governor for GT-i9300?
Following are the CPU governors available:
1) ondemand
2) userspace
3) powersave
4) pegasusq
5) performance
Im looking for fast speed (ie no lag) and good battery life. Thanks!
Its up to you to try them all or read the relevant threads .
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
Kernel
lulzactiveq will help to your needs.To get this option you have to flash a kernel with this governor.
I am using Googy Max Kernel with this governor. Boeffla Kernel, Siyah Kernel also have this governor.
ZZmove for me in Boeffla kernel, you get a choice of profiles, battery, performance etc
Sent via TCP/IP
He created a duplicate thread... Jonny has already closed the other one. There is no best. Try them all and fine the best for you!.
Sent from my SAMSUNG-SGH-I727 using XDA Premium 4 mobile app
Hi,
I have flashed cm 10.2 and boeffla kernel for cm 10.2 to my galaxy s3 phone.
When i enter the settinings-performance-processor i can only see cpu governor: ondemand , userspace, powersave, pegasusq, performance.
I could not see zzmoove in the list. Do i have to install another app to choose zzmoove ? or am i trying to find it in the wrong place?
Thanks in advance!
hbtokgoz said:
Hi,
I have flashed cm 10.2 and boeffla kernel for cm 10.2 to my galaxy s3 phone.
When i enter the settinings-performance-processor i can only see cpu governor: ondemand , userspace, powersave, pegasusq, performance.
I could not see zzmoove in the list. Do i have to install another app to choose zzmoove ? or am i trying to find it in the wrong place?
Click to expand...
Click to collapse
please look first in the kernel/boeffla thread before posting a question it is written there in the first line of features:
To tweak and configure the kernel, load the app "Boeffla-Config V2" from Google play store
Click to expand...
Click to collapse