Related
Hello all -
My "bricked" situation appears to be unique as I've searched all over and have only found others with at least a phone that has a display.
Scenario:
Had SimplyHoney 4.0 installed (I believe Voodoo Lagfix was enabled). Decided it was time to go back to stock. ODIN'd back to stock (doesn't that wipe any VooDoo?). Re-rooted phone and connected to Kies for giggles to see if it would actually work this time for an "Official" update. (Last time I connected the phone it would not recognize the phone as the appropriate phone for an update) This time it saw it as a Vibrant and proceeded to do the Froyo update. Once it was completed, the Vibrant's screen never turned on.
It feels warm to the touch when you turn on the phone after a few minutes like it typically does, but I can't see anything on the screen.
Did this update do an extreme brick to my phone that it is now a lost cause?
I appreicate any advice you have.
BTW, tried the download button combos that are out here and none of those worked.
When I last had my phone open to fix the GPS contact, I see there is a small battery. Would popping that help reset anything?
It's the same scenario in this video on YouTube - "Video of hard bricked vibrant" by htcpro1212
Sorry can't post links yet.
I had a similar situation with a friends Vibrant this is what I did...pull out battery, plug phone to computer with usb, do the three button combo (volume up down &power) while holding replace battery and that should put phone in recovery mode... hope this helps good luck!
Sent from my Nexus One using XDA Premium App
no point rooting if you're going to update with kies, it wipes root
you could have just used whitehawkx stock 2.2 rom, kies has a history of hard bricks after you've been on a few custom roms
keep trying button combo's (vol + and power with the GB bootloades) but chances are its hard bricked, if it doesnt work phone samsung or t-mobile and say you tried updating with kies and it doesnt do anything now
Pm sent I can fix this for you...
You should always try ODIN back to stock. Its such an Relief.
I'm not sure if this will work in this case or not. When I thought I had bricked my Vibrant, I had a picture looking like a phone-triangle-computer on the screen, so it wasn't blacked out.
I got a "jig" (search the forums or google it.) They cost less than $10 and have saved me several times when I've messed up to get me to download mode so I can use odin.
Well, first of all, I should start by greeting the community, as this is my first post. So, yeah, hey everybody, been reading the forum for quite a while now, and it's been of a great help
Now, to the problem - this morning I noticed that my sgs2 had turned itself off. I didn't suspect the phone to be bricked or something as this happens from time to time when using custom roms. I tried turning it back on, it booted up, showed my kernels logo (DorimanX, not sure for the version though), so I put my phone in my pocket. After half an hour or so, I wanted to make a call, but I noticed that my sgs2 still hadn't booted up. So I tried restarting my phone using the power button, but instead of restarting it just turned off and I hadn't been able to turn it on since - it's bricked
I've heard of phones getting bricked while flashing a new rom or kernel, but never had I thought it could happen on simply booting up...
I did some research on bricked SGS2 and here's what I have done so far:
I've tried booting up in recovery/download modes, but that doesnt work.
I've tried soft/hard resetting my phone - still no luck.
I've also tried making an USB Jig, didn't work though. I'm not quite sure if my self-made jig works in the first place, as I did mess up the micro usb connector pretty bad while soldering resistors to pins. I'll try that one again with a different jack later and will keep you updated on weather it worked or not.
So, my question is, if my second try at making a USB Jig fails, is JTagging my only chance on reviving the phone? I guess that a MOBO change would probably help.
Another question is, if JTagging is my only chance, wouldn't it be easyer to just replace the bricked NAND chip? Then again, even though I have all kinds of soldering equipment accessible and also have the skills to do it, I have no idea where it's located on the mobo... Some info on that would also be much appreciated.
I havent flashed a new rom for quite a while now, last time I did it was when the latest version of Resurrection Remix was released.
My CPU wasn't overclocked - it was underclocked to 1GHz.
I was using DorimanX kernel.
Thanks in advance
jankanolv said:
Well, first of all, I should start by greeting the community, as this is my first post. So, yeah, hey everybody, been reading the forum for quite a while now, and it's been of a great help
Now, to the problem - this morning I noticed that my sgs2 had turned itself off. I didn't suspect the phone to be bricked or something as this happens from time to time when using custom roms. I tried turning it back on, it booted up, showed my kernels logo (DorimanX, not sure for the version though), so I put my phone in my pocket. After half an hour or so, I wanted to make a call, but I noticed that my sgs2 still hadn't booted up. So I tried restarting my phone using the power button, but instead of restarting it just turned off and I hadn't been able to turn it on since - it's bricked
I've heard of phones getting bricked while flashing a new rom or kernel, but never had I thought it could happen on simply booting up...
I did some research on bricked SGS2 and here's what I have done so far:
I've tried booting up in recovery/download modes, but that doesnt work.
I've tried soft/hard resetting my phone - still no luck.
I've also tried making an USB Jig, didn't work though. I'm not quite sure if my self-made jig works in the first place, as I did mess up the micro usb connector pretty bad while soldering resistors to pins. I'll try that one again with a different jack later and will keep you updated on weather it worked or not.
So, my question is, if my second try at making a USB Jig fails, is JTagging my only chance on reviving the phone? I guess that a MOBO change would probably help.
Another question is, if JTagging is my only chance, wouldn't it be easyer to just replace the bricked NAND chip? Then again, even though I have all kinds of soldering equipment accessible and also have the skills to do it, I have no idea where it's located on the mobo... Some info on that would also be much appreciated.
I havent flashed a new rom for quite a while now, last time I did it was when the latest version of Resurrection Remix was released.
My CPU wasn't overclocked - it was underclocked to 1GHz.
I was using DorimanX kernel.
Thanks in advance
Click to expand...
Click to collapse
What happens when you plug the charger. Does it charge?
pasanjay said:
What happens when you plug the charger. Does it charge?
Click to expand...
Click to collapse
I guess the battery is charging, as it heats up, but I don't see the charging animation. Also my PC won't see that a USB divice of any kind is connected.
jankanolv said:
I guess the battery is charging, as it heats up, but I don't see the charging animation. Also my PC won't see that a USB divice of any kind is connected.
Click to expand...
Click to collapse
order an usb jig and try. If it does not work send it to a repair center
Very similar happened to me a couple of days ago. Sgs2 crashed and wouldn't boot. I was also running dorimanx kernel, under clocked at 1ghz.
Originally I managed to get to download mode (not recovery mode). Kernels wouldn't flash via odin. I also tried using samsung kies to flash stock without success.
I tried the solution for nand bricked phones in this forum, however, this appears to have hard bricked the phone, since it failed to flash and now the phone does nothing (other than get hot when it is plugged in.) Nothing shows on screen. The PC does not recognise the device.
None of the threads I've read seem to offer a solution to this - any ideas? I guess I need to try a service centre, but thought I'd mention since I had same configuration as jankanolv, which of course may just be a coincidence...
birdr said:
Very similar happened to me a couple of days ago. Sgs2 crashed and wouldn't boot. I was also running dorimanx kernel, under clocked at 1ghz.
Originally I managed to get to download mode (not recovery mode). Kernels wouldn't flash via odin. I also tried using samsung kies to flash stock without success.
I tried the solution for nand bricked phones in this forum, however, this appears to have hard bricked the phone, since it failed to flash and now the phone does nothing (other than get hot when it is plugged in.) Nothing shows on screen. The PC does not recognise the device.
None of the threads I've read seem to offer a solution to this - any ideas? I guess I need to try a service centre, but thought I'd mention since I had same configuration as jankanolv, which of course may just be a coincidence...
Click to expand...
Click to collapse
Sounds familliar, lol. Anyways, did you use USB Jig to get to download mode? Or you just managed to boot it up on it's own?
I am really confused right now, because I'm pretty sure this can't be a hard brick as nothing has went wrong while flashing something on the device - it just bricked itself...
I've just get in the forum a few minutes ago only to find somoene with this symptoms, and i wasn't in here for too long and voilá...
Since yesterday my SGII, with no problems to this date, went in reboot mode for a few times.
I have no clue what is going on, but im sure something is.
i'll wait to see if theres anyone else complaining about it.
cheers
Hmm... Looks like a lot of people are getting this "brick" lately.
Maybe we all used some kind of app that bricked the phone on bootup?
Well, I tried to make another Jig, didn't work... This time though, I screwed my resitors up...
Another thing - is it really relevant to have exactly 301kOhm resistance between pins 4 and 5? As far as I know, it just kind of short circuits some pins on MOBO, which tells the phone to boot up in download mode. But I might be wrong...
Btw, sorry for the double post.
Same Problem
Hi,
I just face the same problem today,
now my S2 not working and just heat up.
this only happened after the original update done to my S2 - Android 4.1.2 - 2 days ago.
any help please
heat up....near the rear camera heat up?
Sent from the little guy
Mine gets hot near the camera. Nothing shows on screen.
In answer to jankanolv's questions:
- originally I could get to download mode via pressing home/power/volume down. (Not any more following failed flash). I've not tried a USB jig.
- my crash which started the situation occurred while I was listening to tune in radio pro app.
Well guys....near camera heating + no boot/dl/recovery = claim warranty saying that you factory reset the phone, 4.0.4 was laggy.
Sent from the little guy
was going to post a thread asking for help for what appears to be a similar problem
mine got stuck in a bootloop after pulling the battery, tried flashing new software in recovery then tried through odin but kept failing, now its bricked.
does nothing, wont go into either download or recovery mode so looks like its off to the service centre with it.
ahmadmetwally said:
Hi,
I just face the same problem today,
now my S2 not working and just heat up.
this only happened after the original update done to my S2 - Android 4.1.2 - 2 days ago.
any help please
Click to expand...
Click to collapse
Yessss! good to know I'm not the only one facing this issue.
I posted a thread about this yesterday but it is all the way down in page 3 already:
http://forum.xda-developers.com/showthread.php?t=2192996
I tapped on the "sync" toggle on the notification shade and my phone just turned itself off.
Recovery and download mode were accessible though.
Thanks for the help.
I went to Samsung to get them to fix based on the factory reset while on stock 4.04 premise, but they were having none of it, and wanted to charge me to investigate the problem. Once out of warranty period, it seems it doesn't matter if their software can brick your phone!
I found a local phone fixing service in Hong Kong which investigated, diagnosed as a motherboard failure (which I suspect my problem genuinely was given how firmware flashes were failing), and replaced + fitted for 700hkd, (approx 90usd). The guy did it in front of me within 10 mins. "Andy Telecom" in Mongkok, on +852 9237 9237 in case someone else has the same issue locally.
Well, outta warranty...that's another story. You only get 1-2 years to brick your device
Glad you had it fixed for 90 bucks, some service centers charge around 150.
Sent from the little guy
Well, I finally managed to make a working USB Jig, tried it on Galaxy Ace, worked like a charm.
What confuses me right now, is that my sgs2 has drained all the battery, even though it was switched off for about 2 days. I'm charging the device right now, and I will keep you updated on weather my jig works..
Sorry for double-posting again on an old thread, just wanted to let you guys know - I took the phone to warranty service and they changed the mobo. I didn't have to pay anything and everything is working normally. Of course all data on sd card is now lost for good, lol.
So if you hard brick your device so badly it even won't respond to usb jig and you still have your warranty active, don't bother trying to revive your phone - just take it to warranty service
I guess they couldn't see the odin download count so they cant void my warranty, he he he ]
I have the D-800 AT&T LG G2, It was rooted with KitKat 4.4.2. After I rooted my phone, I tried several different ways to install TWRP onto it. I tried FreeGee, adb shell, and straight from TWRP App, nothing worked, because when I tried to boot into TWRP it would just come up with the LG Logo and "Secure Boot Error" and "Certification Error" or something like that, then be a blank screen. I then just held the power button to turn it off, and it would turn back on and run fine, no problem. I figured it never installed right, and so I left TWRP alone. I know you are not supposed to take an OTA after install TWRP, but thinking TWRP never installed on the phone, I took the OTA, and now it will do the "Error" messages and blank screen, but my power off, power on trick doesn't work anymore. I can boot into Recovery Mode, but when I do a Factory Reset, the screen just goes blank. I have tried to put it into Download Mode by pressing Volume Up + Power when hooked up to a PC, but nothing happens. I feel as though its a tough brick. Please Help!
Dirk1616 said:
I have the D-800 AT&T LG G2, It was rooted with KitKat 4.4.2. After I rooted my phone, I tried several different ways to install TWRP onto it. I tried FreeGee, adb shell, and straight from TWRP App, nothing worked, because when I tried to boot into TWRP it would just come up with the LG Logo and "Secure Boot Error" and "Certification Error" or something like that, then be a blank screen. I then just held the power button to turn it off, and it would turn back on and run fine, no problem. I figured it never installed right, and so I left TWRP alone. I know you are not supposed to take an OTA after install TWRP, but thinking TWRP never installed on the phone, I took the OTA, and now it will do the "Error" messages and blank screen, but my power off, power on trick doesn't work anymore. I can boot into Recovery Mode, but when I do a Factory Reset, the screen just goes blank. I have tried to put it into Download Mode by pressing Volume Up + Power when hooked up to a PC, but nothing happens. I feel as though its a tough brick. Please Help!
Click to expand...
Click to collapse
Bump Please. Same Exact Problem With Me, Rooted, Couldnt Get A Recovery Installed (Even Though I've Literally Been Doing Custom ROMs Since The G1 Released) And As Of The Other Day, AT&T Kept Bugging Me To Update To 4.4.2, Even Though I Was Already At 4.4.2. I Kept Declining, But Today My Battery Died, And When It Turned On, It Automatically Installed It, And I'm Getting The Same Errors And Everything.
Send It In
dotjsx said:
Bump Please. Same Exact Problem With Me, Rooted, Couldnt Get A Recovery Installed (Even Though I've Literally Been Doing Custom ROMs Since The G1 Released) And As Of The Other Day, AT&T Kept Bugging Me To Update To 4.4.2, Even Though I Was Already At 4.4.2. I Kept Declining, But Today My Battery Died, And When It Turned On, It Automatically Installed It, And I'm Getting The Same Errors And Everything.
Click to expand...
Click to collapse
I could not find a fix for this problem. Instead, I sent it back saying that it updated automatically and then it didn't work. They can not tell that you have rooted it, because it is so messed up, SO DONT TELL THEM THAT YOU DID! It'll take about 2-3 weeks foe it to be sent back. It'll be free as long as you are under warranty. Just talk to a customer service person on LGs Online Customer Service people. I hope this helps you out!
Dirk1616 said:
I could not find a fix for this problem. Instead, I sent it back saying that it updated automatically and then it didn't work. They can not tell that you have rooted it, because it is so messed up, SO DONT TELL THEM THAT YOU DID! It'll take about 2-3 weeks foe it to be sent back. It'll be free as long as you are under warranty. Just talk to a customer service person on LGs Online Customer Service people. I hope this helps you out!
Click to expand...
Click to collapse
Thanks For The Suggestion. Ironically, I Was Just At The AT&T Store Because They Were Selling Otterbox Defenders For 25 Bucks, And I Told The Guy That My Phone Was Rooted. I'll Have To Go To Another Store. I'm Working On The Linux Fix As We Speak, So Hopefully I Wont Have To Send It In.
dotjsx said:
Thanks For The Suggestion. Ironically, I Was Just At The AT&T Store Because They Were Selling Otterbox Defenders For 25 Bucks, And I Told The Guy That My Phone Was Rooted. I'll Have To Go To Another Store. I'm Working On The Linux Fix As We Speak, So Hopefully I Wont Have To Send It In.
Click to expand...
Click to collapse
I have tried the Linux fix, that didn't work for me, hope it works out for you. Talk to LG, they are the ones who will fix it. You will have to send it to them. I used United States Postal Service, it costed me like 9 dollars, which isn't bad. Good Luck!
[Q&A] [ROM]【4.4.4】Google Play Edition 【KTU84P】- 09/30/2014
Q&A for [ROM]【4.4.4】Google Play Edition 【KTU84P】- 09/30/2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
gpz1100 said:
I gave up trying to calibrate my compass. I have issues with it in any rom including stock TW. Some of these chips are just broken.
Click to expand...
Click to collapse
After trying many of the suggestions on this thread to fix the compass (my GPS lock is fine), I thought I might have messed up the hardware somehow. However, last night I flashed the 7/12 KT GE kernel, and the compass now correctly points in the right direction.
Germany?
Hi Dan (or whoever else reads this). Love the ROM! It's amazing. Do you know if it will work in Germany? I went to Mexico a few months ago, and the latest build at the time would not get reception anywhere. Flashing a TW ROM solved the problem, but I would much rather use yours.
Thanks!
TheSt33v said:
Hi Dan (or whoever else reads this). Love the ROM! It's amazing. Do you know if it will work in Germany? I went to Mexico a few months ago, and the latest build at the time would not get reception anywhere. Flashing a TW ROM solved the problem, but I would much rather use yours.
Thanks!
Click to expand...
Click to collapse
Well in case anyone is curious, this ROM gives me great cell service (full signal on Vodaphone.de) but no data in Munich. I tried airplane mode, disabling/enabling data roaming several times and setting the network mode to GSM preferred, but no luck. Flashing the latest release of Hyperdrive ROM allowed me to use data. Oh well.
flashing google edition on verizon s4 on nc5
I'm a noob and can't figure out if i can use safestrap to flash the dandvh google play edition rom.
verizon galaxy s4 on nc5 build, rooted with towel root and running safestrap 3.75
Viper Audio Working?
Does anyone else use Viper Audio with this rom? I find that the audio driver frequently stops processing when I stop playing music and then come back and play again. It will start processing again if I reboot the phone or even kill the Viper gui process. I've tried installing it as a user or system app but hasn't seemed to matter. Anyway, just curious if anyone else was having the same kind of results.
Hi everyone, hoping you all can help me with a problem I'm having with my phone. First, some specs:
ROM: Danvdh GPE 9/30
I am one of those lucky MDK users, I got the phone in May 2013 and rooted early
I had been running the NC5 modem for a while now with no issue. The problem started after I flashed the NG6 modem (from Surge1223's thread) in TWRP. Just fyi, here are the steps I took to flash the modem. Within TWRP, I flashed the zip file, cleared Dalvik/cache, then rebooted.
Almost immediately I started getting random reboots. It rebooted twice, then seemed to settle down, so I decided to wait a day or so to see what my phone would do. Sadly enough, it started rebooting again, so I gave up last night and reflashed the NC5 modem in TWRP using the same method as before. The phone was fine after that, until this afternoon. About an hour ago, my phone froze, and rebooted, but the screen cut off at the Samsung custom padlock boot screen. It seems to be off at this point, but I can't power on the phone without pulling the battery. After pulling and replacing the battery, the phone powers on by itself, but again cuts off at the Samsung boot screen, about 3-4 seconds into the boot process. I've tried booting into TWRP and download mode, with the screen turning off and the device seemingly freezing after 3-4 seconds. I'm at a loss as to what to do at this point.
I'm at work right now, but when I get home, I will see if Odin3 can make some sort of contact with the phone. Any help in the meantime would be greatly appreciated!
Sounds like you may have a bad dl. Re download. Turn phone off. Then boot into TWRP and reflash the modem zip. Not the non-halos.zip.
Alxoom33 said:
Sounds like you may have a bad dl. Re download. Turn phone off. Then boot into TWRP and reflash the modem zip. Not the non-halos.zip.
Click to expand...
Click to collapse
I would love to, but I can't.
I put a video up on Youtube showing what the phone is doing right now. I don't have 10 posts yet, so I can't post links, but if you go to youtube.com then add "/watch?v=3ey5xD9LodY" at the end of the URL, you can see what the phone is doing.
It is the only thing the phone will do. I've tried doing a hard reset by holding the power button, but nothing happens. All I can do is pull the battery and start this process again. If I hold the correct button combos, I can begin to boot into TWRP or download mode, but the phone cuts off/freezes like clockwork after 3 seconds.
I tried to get Odin3 to recognize the phone, but my desktop doesn't recognize that anything is plugged in when I connect my phone to it, so Odin3 by extension doesn't see anything.
Did you install the Samsung apps on your computer? You need them for the computer to recognize your phone.
To hard boot into recovery you need to hold power button and volume up at the same time, then let go of power button once blue writing appears on upper corner of phone.
Sent from my Xoom Wifi using Tapatalk
I'm sure I have. I've been able to send adb commands to the phone in the past. Now however, my PC doesn't even see that a device has been connected to it (nothing shows up in the device manager, not even an unrecognized device).
The phone will no longer charge when I plug it into an AC adapter either (or at least the LED no longer lights up indicating it's charging).
I have tried booting into recovery several times. Each time, it will begin to boot into TWRP, the blue text, "RECOVERY BOOTING...", will display, then immediately afterwards, the screen will cut off and the phone will freeze, just like in the Youtube video I posted.
I'm afraid the thing is bricked...
So, I was talking to a friend about what's been going on with my phone. During the conversation, I started goofing around and smacking the back of the phone like 4-year-old me would an NES to try and make it work (ah, good times...). Believe it or not (and I did not touch the power button while doing this), the phone powered up and successfully booted!!!
It showed only 2% battery life, so I connected it to the AC adapter, but then a few seconds later the phone died again.
This occurrence leads me to believe there is something wrong with the battery, and leads me to another question. Can the S4 (or any other smartphone) run solely on USB power?
My roommate has a Galaxy SIII, I read the SIII battery can be used in the S4, so I will test the phone out with his battery when he gets back tomorrow, and update you then.
marioluigi64 said:
So, I was talking to a friend about what's been going on with my phone. During the conversation, I started goofing around and smacking the back of the phone like 4-year-old me would an NES to try and make it work (ah, good times...). Believe it or not (and I did not touch the power button while doing this), the phone powered up and successfully booted!!!
It showed only 2% battery life, so I connected it to the AC adapter, but then a few seconds later the phone died again.
This occurrence leads me to believe there is something wrong with the battery, and leads me to another question. Can the S4 (or any other smartphone) run solely on USB power?
My roommate has a Galaxy SIII, I read the SIII battery can be used in the S4, so I will test the phone out with his battery when he gets back tomorrow, and update you then.
Click to expand...
Click to collapse
Have you tried a different USB cable/transformer? It sounds like you might just have a charging issue. Not enough juice to get it started.
Allowing a battery to cool down will give it more usable power, which as it heats back up will deplete again. This sounds like your situation... Power off for a few, restart it has enough to begin booting, then depleted again.
The phone cannot run on USB alone it needs the battery to sustain it's operation.
I have tried 3 USB cables, 2 AC adapters, and 2 PCs.
When this started on Friday, my phone was hooked up to my PC at work and showing about 50% battery, but it's possible something went wrong with the battery and it's stopped delivering any significant amount of power or accepting a charge.
So it turns out it wasn't the rom or new modem that was the problem, my battery has decided to kick the bucket. I tried my roommate's battery in my phone and it booted right up as if nothing was ever wrong! Strange that an OEM battery would just die like that, but I suppose that does happen from time to time. Thanks for the help!
matycakes said:
Does anyone else use Viper Audio with this rom? I find that the audio driver frequently stops processing when I stop playing music and then come back and play again. It will start processing again if I reboot the phone or even kill the Viper gui process. I've tried installing it as a user or system app but hasn't seemed to matter. Anyway, just curious if anyone else was having the same kind of results.
Click to expand...
Click to collapse
I use it, and I've never had any issues with it. I would recommend reinstalling, but you've probably tried that already. Are you using the latest version of the app?
TheSt33v said:
I use it, and I've never had any issues with it. I would recommend reinstalling, but you've probably tried that already. Are you using the latest version of the app?
Click to expand...
Click to collapse
Yeah, I have tried reinstalling it, and I am using the latest version of the app. The fact that you haven't had any issues is encouraging. I'll continue to troubleshoot and see what I can find.
I keep getting this (in CWM touch)
Flashing Google Play Edition
Android 4.4.4
Enjoy!
format() expects 5 args, got 4
E: Error in /storage/sdcard1/danvdh-GE-4.4.4-09-30-2014-VZW.zip
(status 7)
installation aborted
Is it just a bad DL?
EDIT: Tried a new DL, same issue. I want to get this fixed asap
Is cm11 theme manager included in this rom?
brd912 said:
Is cm11 theme manager included in this rom?
Click to expand...
Click to collapse
It is not.
Hi there! Long time reader, first time poster (TL;DR below...but it should be a quick read anyways )
So I've been using this S2 of mine for almost 4 years now, haven't had any trouble (other than a couple of battery swaps). For the past 6 months or so I've been using CM 12.1 nightlies without issue.
The events:
- The other day, my phone froze (I wasn't using it when it froze, it was when I went to use it that I noticed...it was on the wifi selection screen if it matters), so I held the power button to shut it down, and when I powered it back up, it just froze at the Samsung boot screen (with the usual yellow triangle).
- At this point, I was able to reboot into download mode at will, but any attempt to boot to recovery just led to the freeze at the Samsung boot screen. Also, the phone would automatically reboot itself at this point any time I inserted the battery (I was of course putting the battery in and out trying everything I could).
- I would have reflashed from Odin at this point, but since I was away for a few days I just kept trying to reboot into recovery, to no avail. On one of these attempts (power+vol up+ home) it showed the Samsung boot screen, and then immediately shut down and I haven't been able to get anything onto the screen since
I'm now home, and I can't seem to fix it. If I plug the phone into a charger, the top half or so of the phone gets warm, and it also seems to get warm if it isn't plugged in and I try to power it up. I was thinking maybe the phone was maybe doing the same thing as before and just not showing anything on screen, but I blindly do the steps to get it into download mode, and Odin doesn't recognize anything (drivers are definitely installed). I have also tried other batteries, no luck.
Any ideas of what I might try? I'm willing to do anything. For the record nothing happened to the phone at all when this all happened (no dropping or water damage or anything, just my attempts at booting into recovery). Maybe I should try a jig? I'm also open to opening the phone if there's something I can do, though I don't have experience with this.
Thanks so much for any suggestions!
TL;DR: phone froze (running CM 12.1 nightly), held power to shut it down, and then consistently froze at the boot screen on any attempts to power it on. After a few attempts at booting into recovery (the phone would only freeze or enter download mode) the screen suddenly shut off and I haven't seen anything on it since no matter what I try. I can't think of anything that happened to the phone I'm open to any and all suggestions! Thanks
One sentence amongst your description stands out like a 'sore thumb'.....
That the device heats up towards the top when you attempt to charge it.......
Until you try a jig I can't be certain, but that heating coupled with a dead/unresponsive screen along with a lack of recovery and/or download modes (download mode is 'hardwired' into the device, and NOTHING should be able to corrupt it) are the primary symptoms of a failed motherboard.......
That is my opinion based on my experience in these forums and personal experience with a (now dead) S2 (one of two that I own).........
Get the jig just to be sure, but I'd be surprised if it had any effect.....sorry to be typing something you don't want to read, but you said it yourself, the device is 4 years old....it's been in service roughly twice as long as most smartphones, and they don't last forever....
http://i.imgur.com/rVnFwJM.jpg
Thanks dude! It's nice to have some idea of what happened. I am indeed very happy my phone has lasted me this long, and my friend is gonna give me an extra S2 she has anyways it seems so it's all good!
I'll try the jig and update here with the result (I ordered one online...will arrive in January sometime)...just in case anyone is curious.
smacsmac said:
Thanks dude! It's nice to have some idea of what happened. I am indeed very happy my phone has lasted me this long, and my friend is gonna give me an extra S2 she has anyways it seems so it's all good!
I'll try the jig and update here with the result (I ordered one online...will arrive in January sometime)...just in case anyone is curious.
Click to expand...
Click to collapse
Yeah....be good to know the results.....If only to confirm or refute what I've suggested.....
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Yeah....be good to know the results.....If only to confirm or refute what I've suggested.....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
Sorry it took me a while...the jig was in the post haha. It didn't do anything at all (no response when I plugged it in) so I think it's safe to say you were bang-on and the motherboard failed! Happily using a new S2 (with CM13.0 now ) on behalf of my friend though.
Thanks again.
Sounds familiar. Happened to me also due to failed cyanogenmod update (CM13). Only thing that works is download mode, so i'm not given up hope yet.
I can't post a link but google ''Apply Update Failure samsung galaxy s II'' there's a thread about this on the cyanogenmod forum.
Elaias said:
Sounds familiar. Happened to me also due to failed cyanogenmod update (CM13). Only thing that works is download mode, so i'm not given up hope yet.
I can't post a link but google ''Apply Update Failure samsung galaxy s II'' there's a thread about this on the cyanogenmod forum.
Click to expand...
Click to collapse
oh mine was just straight up dead...no download mode or anything visible on the screen (and nothing to do with CM13 either)
hope you get yours sorted out! have you tried reflashing anything via Odin while in download mode?
Its hard to tell you and hard to accept. You can almost give up the hope, your NAND Chip is just what we call " wear-out ". In the most cases no write is possible anymore, the funny part is -> sometimes read is still fine. If that is the case: The system is booting and working, but saving just nothing. The NAND is frozen to its state before it broke.
At our local store, customers come to us with issues like " Factory Reset impossible ", "Can't delete my Files" "Can't create files". All these Devices have inaccessible NAND's and inaccessible Recovery. Only Bootloader is working, but as the NAND is broken, flashing doesn't change anything.
smacsmac said:
oh mine was just straight up dead...no download mode or anything visible on the screen (and nothing to do with CM13 either)
hope you get yours sorted out! have you tried reflashing anything via Odin while in download mode?
Click to expand...
Click to collapse
yeah, flashing with odin did the trick. now running cm13 and everything works fine. sorry to hear that your phone turned to brick.