Related
Anyone have any experiences, good or bad, with vehicle mounts for their samsung galaxy sII i777?
I'm looking for one that will fit with my Case Mate Tough Case on (Excellent case btw, I highly recommend)
From what I can see the samsung mount doesn't work with cases. I'd like one that can at least cleanly route the audio and charging cable to it. But ideally it would have it's own connectors and be permanently plugged into my car. I'd like to just sit down and dock my phone in it and go.
Is there anything out there just like the samsung mount that will work with the case on? This is the samsung mount I'm referring to:
http://www.amazon.com/Samsung-ECS-V...UE22/ref=sr_1_3?ie=UTF8&qid=1321380855&sr=8-3
I'm in the same boat as you are. My 3gs had this from Belkin.
http://www.amazon.com/Belkin-Tuneba..._1_2?s=wireless&ie=UTF8&qid=1321389164&sr=1-2
Looking for a mount that will do the same.
I'm really hoping someone can shed some light on this.
Maybe there are some decent universal ones out there that can be recommended?
Took forever to find it but here's the one I got:
ebay.com/itm/Platinum-MobileDock-Dash-Windshield-Suction-Mount-UUM10BB-Universal-MP3-Player-/140633919502?pt=PDA_Accessories&hash=item20be6f500e
Been an awesome mount. Bought back in July. For a few weeks it was in my glove box and the pad was not even close to being sticky. Washed it up and it's back to like new sticky.
With the opening between the two rest points on the bottom the power cord fits perfectly.
Stays on the windshield and dashboard with no issues.
And with as small as the support arm is, it moves very little from bumps in the road.
Sent from my SAMSUNG-SGH-I777 using XDA App
ExoGear Mount
There is another thread on this, but I picked this one up at amazon for $18. Awesome mount, holds any phone. While it doesn't have a connection it will hold any phone anywhere with or without a case.
http://www.exogear.com/products-exomount-car-mount-holder.html
these mounts fit a sgs2 with an otterbox commmuter case on it
http://www.slipgripcarmounts.com/Using-Commuter-Case_c_21890.html
don't know if it will fit the tough case. I haven't used the mount before
I did buy one for my naked captivate and it worked great. I burned through 3 universal car mounts before I got the slip grip for my captivate
I bought a universal one from walmart for $15. Sits on the dashboard and adjust the holder itself to fit the phone. Used the google navi on the phone while traveling from the Jersey shore to Buffalo NY and back and didn't have a single problem.
The device never popped out nor did the actual unit move.
This is the one that I am looking at.
Mounts in the CD slot of your radio... of course if you change out CDs often this may not be the best for you.
I don't change CDs that often so I think it will be ideal.
What you all think?
http://www.amazon.com/Mountek-MT5000-C-Universal-Satellite-Devices/dp/B004E5W3D4
I believe the at&t version charges at .7 amps or something. My Griffin Technology 1 Amp PowerJolt Dual Micro would be bad for my phone because I was gonna parter it with the ExoGear Universal ExoMount for driving. Would that kill my battery? This looked good till I saw the 2.1 amps. http://www.amazon.com/Potato-Techno...Android/dp/tech-data/B004NQDU5E/ref=de_a_smtd
Check out the mounts by ProClip. They are not cheap but are well made. I have a similar one to this link below that I bought several years ago for my old ipod. I still use it and have since upgraded to the ipod touch. Now will be replacing that with the SG2. Works great. However since mine is older there is quite a bit of space between the back of the holder and the phone. I simply added a piece of the foam insert you typically get when buying a phone case. Works great and now the phone/itouch doesn't tilt back.
http://www.proclipusa.com/?sectionpath=383&pageid=13758&processor=content&pcategoryid=13451&categoryid=18750&lightwindow=true&usermode=_dualselect&v_pcat=&v_cat=&year=&d_pcat=13451&d_cat=18750&have_holder=false&have_mount=true&p_pageid=1&dtype=
kipliq said:
I believe the at&t version charges at .7 amps or something. My Griffin Technology 1 Amp PowerJolt Dual Micro would be bad for my phone because I was gonna parter it with the ExoGear Universal ExoMount for driving. Would that kill my battery? This looked good till I saw the 2.1 amps. http://www.amazon.com/Potato-Techno...Android/dp/tech-data/B004NQDU5E/ref=de_a_smtd
Click to expand...
Click to collapse
It will be fine as that is the Max amperage that the charger can support. The phones hardware charging system limits current.
here's my thread on the hard wired proclip
http://forum.xda-developers.com/showthread.php?t=1317064
this particular one will not work with a case, as the phone fits very snug as it is, which works perfect for me.
Did a search of this section and was surprised to see that no one has mentioned Slipgrip at all. Just wanted to let everyone know about the products they have for the SGS2.
They make mounts for your car/bike/whatever; the cool thing about them is that they make them to be used with a naked phone or while your phone is in an Otterbox or Seidio case. I had one for my Inspire 4G and now for my SGS2, both were wearing Otterbox Commuter cases. The mount works perfect, just pop the phone in and it locks in place, pops back out when you push the clip. It's held securely and they have multiple mounting options (vent mount, suction mount, RAM mount, bike mounts... they have 12 different mounting options).
Another neat thing is that it is cut out to accommodate the camera, so you can mount it on your windshield and easily record the idiots in front of you.
Yeah I had one of these for my captivate after burning through 2 or 3 universal car mounts. Its great. Really sturdy and your phone wont come out unless you want it to. Hopefully Ill get around to buying one for the gs2
I was just looking at these the other day. Other than buying direct from them which it was going for $30 - I could not find them anywhere else. Glad to know it works well, I will just have to save up for it.
As of late I've been without a car and as a result I've had to ride my bicycle everywhere I need to get. When it was a bit colder out, I had pockets a-plenty, but as of the past few weeks it's been too damn hot for a jacket or even cargo shorts. I usually tend to wear athletic shorts to and from my destination, but the pockets just let my phone flop all around all willy nilly and it's gotten to the point I'm a bit concerned that the constant slapping against my leg might eventually lead to some phone problems or, at the very least, screen problems. Plus, pulling my phone in and out of my pocket while riding can be very bothersome.
That said, I'm looking into getting a bicycle mount. I've found a few different setups, but I'm a bit concerned as I've got my phone in a Trident Electra case and it makes my phone shape...unique. It's about twice the thickness of a regular Dx2 and I really don't want to have to remove the case every time to mount it to my bike, plus I'd feel even less safe with it mounted that way as the path I take too and from work are none to gentle and IF the phone were to come out of the holder it could be very bad indeed.
I've looked at a couple universal solutions, but for some there appears to be a consensus that you'll need to use a strap in conjunction with the holder to make sure it's held solidly in place and others don't really appear to support anything more than the typical phone's thickness.
The two mounts I'm considering are:
The GN032+WPCS-IP2 Universal Handlebar Mount
OR
The RAM Universal Bike Mount
The GN032 seems like it'd be better suited for the elements, and the thickness of my phone. BUT I've been reading several good reviews of the RAM mount system and it seems like it'd really be able to hold up against the ****ty sidewalks in my city. I'm leaning more towards this unit, but I just can't find anyone who has used a thick case like the Electra in combination with this unit, the closest I've read so far is people with Otterboxes.
So, anyone have any experience with these or any other handlebar mount kits?
Skelente said:
[EDITED QUOTE]
The two mounts I'm considering are:
The RAM Universal Bike Mount
So, anyone have any experience with these or any other handlebar mount kits?
[/EDITED QUOTE]
Click to expand...
Click to collapse
I have been looking at the RAM Universal. I have used RAM mounts in my vehicle for various devices and have always been pleased with them. Just my $0.02 (adjusted for inflation, of course!).
They have a Universal AquaBox mount and have pictures of a Droid X in it. http://www.ram-mount.com/Gallery/motoroladroidxmotorcyclemount/tabid/4067/Default.aspx
Also, after doing a little more research, the Universal X Grip Mount is spring loaded and I don't think will take bumps as well as the AquaBox.
Ciao!
Moon Shadow - NM said:
I have been looking at the RAM Universal. I have used RAM mounts in my vehicle for various devices and have always been pleased with them. Just my $0.02 (adjusted for inflation, of course!).
They have a Universal AquaBox mount and have pictures of a Droid X in it. http://www.ram-mount.com/Gallery/motoroladroidxmotorcyclemount/tabid/4067/Default.aspx
Also, after doing a little more research, the Universal X Grip Mount is spring loaded and I don't think will take bumps as well as the AquaBox.
Ciao!
Click to expand...
Click to collapse
Whoa! Dunno how I missed the aqua box. That thing is massive!
With your other RAM mounts did they use the X grip? What devices did you use?
Skelente said:
Whoa! Dunno how I missed the aqua box. That thing is massive!
With your other RAM mounts did they use the X grip? What devices did you use?
Click to expand...
Click to collapse
Never used the X-Grip. I have a universal mount for my Garmin eTrex Vista HCx. It's never fallen off my windshield and holds the GPS well. I have also used a modified laptop mount to hold my laptop in my vehicle, before I purchased the Garmin. That was pretty cool... I don't have any pictures of it, though.
Ciao!
I used the arkon GN032 on my old motorcycle when the speedo light went out. It work perfectly for what I used it for, a night time digital speedo. I did use it a couple times for daytime navigation, and it worked fine, though sun glare was an issue; it was on a naked bike, however.
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Same
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
I've been looking for the same thing, swivel capabilities is a must. Anyone find a good one?
Get a decent quality universal car mount (with the four prongs) and then just buy a cheap fixation for your Lumia. That way you can keep the mount when you eventually change phones... That's what I've been doing for the last few years...
I've got a telescopic Herbert Richter car mount which looks like it's the same as this one (http://www.ebay.com/itm/iGrip-Herbe...472900?pt=PDA_Accessories&hash=item48454f5744) and I've been very pleased with it. Unlike some of the cheaper ones I've had it has never lost suction and come unstuck. Most eBay sellers who have cheap Lumia 920 car mounts will sell the phone-specific part of their mounts separately for a couple of euros...
Well .. i dont like the universal ones to be honest because the ones i used never where as usfull as expected. will have a loook at the richter one.
Which car charger can you recommend. I am reading a few amazon.co.uk reviews and they are not to pleased with the ones offered
The one I use (and the one that looks like mine that I posted a link for) isn't one of those universal ones that can be adjusted to hold any size of phone... I don't like those ones either... The ones Im talking about just use a four prong system where you can attach phone specific "faceplates" like you can see here http://forum.xda-developers.com/showthread.php?t=683631 so it looks like it's made for the phone you use it with... Sorry, it's not easy to explain but you should be able to get an idea of what I'm talking about.
does your one come with a car charger already?
got different from belkin etc .. just looking for the power part of a car mount now.
will see if i find a universal holder later
hrmm, not sure if we are allowed to post links on here...
anyways, i bought this one http://www.amazon.co.uk/gp/product/B00AEO3U7W/ref=oh_details_o00_s00_i00
took a gamble as there was no reviews, current review is from myself.
Its pretty solid, I tend to always buy ones for the phone as I'm not a big fan of the all in one mounts, and the nokia one i got for my partners 710 is terrible, won't even hold my phone just slips out constantly. I've got a car charger from maplin to go with it that does do a 1000ma charge as my old charger didn't charge the phone enough to keep up with navigon.
Its as solid as some premium brand mounts i've bought in the past, as good as you can get with one suction cup. (imo) how long it lasts is another thing, but for the price I thought it was pretty neat, a friend borrowed it and immediatly ordered one too.
Its very sturdy and the easist phone mount i've used to slip in and out, only thing that did initially put me off is the fit isn't 100% secure, theres very slight movement, i don't think its even 1mm, thought it would rattle but seems fine in the car.
well i just ordered this for my charging:
http://www.amazon.co.uk/gp/product/B002C3AFHG/ref=oh_details_o00_s00_i00
hope you didnt have this one
and i will have a closer look at the amazon offer, thanks
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
NeoGreendawg said:
stead, look at the second photo of the one you bought, see the four prongs? That means the front panel comes off so yours is one of the ones that I was talking about that can be used with any type of phone (as long as you get the right front panel holder piece)... :laugh:
Click to expand...
Click to collapse
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
stead said:
Ah, i thought you meant those univseral one size fits all ones that clamp onto the phone! everyphone holder i've bought has had the 4 prongs, but everytime I buy one I can never find just the phone bit on its own and just end up buying the whole thing again
This is the offending nokia one I bought, its terrible http://www.amazon.co.uk/gp/product/B003D1US46/ref=oh_details_o03_s00_i00
Click to expand...
Click to collapse
I've very rarely seen them advertised on their own but if you ask, most eBay sellers who sell the dirt cheap car holders will sell you the phone specific attachment on it's own in my experience and usually for only a couple of euros including postage. Postage must be cheaper in Hong Kong than it is in France... :laugh:
Arkon Slim-Grip Floor Mount SM525-S
FWIW I have been using this model for about 4 years- first with my Tilt2 and now with the Lumia 920 (both without a case and with an Otterbox Defender case as the holder can expand). I had an older version for the Tilt2 which didn't allow for 180deg movement (you couldn't move the phone to landscape position while inside the holder) so when I got the 920 I was able to purchase just the Slim-Grip portion and keep the flexible pedestal part that I already had.
The 4 legs on the Slim-Grip are not permanent- they come in a little bag and you slide them into the body of the phone holder. The move left and right to allow for access to ports on the phone that may not be centered on the phone itself. It also comes with extra legs that are a different shape in case you need a different fitment for your phone (think they are shorter?). The bottom of the Slim-Grip is the part that moves- you push it down with the bottom of your phone and it expands enough to let you then push the top of the phone into the holder so the top legs support it. It isn't obvious from the pictures on Arkon's site at first but you will see a line running across the holder when you look at the pictures and that is where the movement occurs.
I am able to put my phone in the holder with one hand and, because the pedestal part is mounted to one of the passenger seat floor bolts, it's very stable. It's hard to move the pedestal to bend it to different shapes, which is a good thing, because it won't flop all over the place when driving. I can use the 920 without a case in it and with an Otterbox Defender, either way is fine. It allows easy access to the audio and power ports. My friends stick their phones in it too and it holds them just as well (iPhones, Galaxy S3's, Blackberry's etc......).The mount does not impede passenger comfort, however they may not be able to just flop their left leg against the center console because the mount would then be rubbing against the plastic and may leave marks, at least in my Subaru Legacy.
I have used this mount without any problems for close to 5 years now and everyone is jealous of it because it is so secure and convenient. I have no problems recommending it 100%. Good luck.
-adrian- said:
Hi there,
i am looking for a car mount for my lovely 920.
anyone got a decent one with horizontal and vertical capabilities
Click to expand...
Click to collapse
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Dave-Kay said:
Forget about universal car mounts. Have a look at the products from "Brodit", if available in your country. There's a special mount for almost every car und a special mount for almost every phone and tehere are active and passive holders. i bought a universal-mount and will never again, buy any universal crap. Now gonig downstairs, mounting my Brodit
Click to expand...
Click to collapse
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
BigKuri said:
You can now order a specific Brodit 920 - un-powered, cig-socket, and hardwired. Excellent mounts, especially the powered ones - amazing how nice it is to just slide the phone in and not worry about fiddling with charger cables...
Click to expand...
Click to collapse
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Griffinx said:
Do these swivel 90degrees so as to use the phone in landscape as well as portrait?
Click to expand...
Click to collapse
They swivel 360 degrees and are very high quality. I've got one in my car that I've also used for my Note II (different holder of course though). It was well worth it IMO.
brodit always had the best ones..
but i read something with "screws" and that made me buy something different for the glas
What did you hear, I'm curious.
Sent from my 920
oh i just found car mounts to be screwed in the cockpit
-adrian- said:
oh i just found car mounts to be screwed in the cockpit
Click to expand...
Click to collapse
Oh OK I understand what you're saying now; I thought you were referring to an issue like the screws scratching the phone or something like that.
I didn't have to screw anything into my dash. I had a mount that clips onto the dash and a holder which is screwed into said mount. Very easy.
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.