Hello!
I have a question for you about this phone. Well, I would buy this phone but in a shop which sells it, this phone has a flaw ..
The problem is that the screen is not showing, but reacts to the touch and turns, plays the sound.
Since the seller is not found out whether it displays the "image", which means the brick ..
I am an Xperii X8 but I would like to purchase Vibrant is why I ask you about it because I do not Wem or not you will need to replace the digitizer and now in my country there is no (Poland) ..
Using translate.google
Related
Hi SG2 lovers,
I've bough recently in Latvia, LMT service provider SGS2 which Made in Vietnam and sent it back for replacement because of the issues as follows:
1. Light grey vertical line across whole screen on the right side
2. Flimsy battery
3. Pink spot issue.
Have anyone found same or similar issues for ones Made in Vietnam.
I've received conclusion from repair center of faulty device and looking forward to receive new one, but unfortunately local provider have in stock only Made in Vietnam.
Tough decision whether to challenge with another one or wait for another supply?
Looking forward for advices!!!
i have a problem
i have bought a sgs2 made in Vietname
i have found this following problem till now
*Gps is broken and not working !!
why vietname is this bad ? :O
Mine is made in vietnam, everything working fine, not a single problem, I am really happy
Send from my Samsung Galaxy S II
shifatul said:
Mine is made in vietnam, everything working fine, not a single problem, I am really happy
Send from my Samsung Galaxy S II
Click to expand...
Click to collapse
Well I think it's just depends on series of production, 'cause I had 2 fault devices from China as well. So it's like casino!
Hi everyone, I was wondering if someone would be able to help me with my question/problem. I'm kind of new to this site, so please excuse me if I seem noobish. I tried looking everywhere in the forums for something similar to my predicament, but I didn't find anything. Either that, or I didn't look very well.
Anyways, I'll try to be as brief as possible. I bought a broken Samsung Galaxy S2 with a cracked screen and broken digitizer for $100. My plan was to swap out everything with replacement parts, but when I took it apart to check the model number (because I noticed some differences from my i9100) I found out that it was the Korean-type S2. The model number is SHW-M250S. I looked everywhere on Ebay and Amazon for the lcd screen and digitizer for this exact model, and nothing came up except the regular i9100 lcd+digitizer replacements. Link below:
http://www.amazon.com/Display-Digiti...7&sr=1-1owever
I did check on Amazon, and the closest thing I was able to find for the shw-m250s model are these items that are in the link below. Other than the lcd screen and digitizer, it also comes with a brand new housing and other parts I don't need. Which is just making it more expensive. Link below:
http://www.amazon.com/Touchscreen-Di...6418770&sr=1-3
My question is, can I use a regular i9100 lcd screen and digitizer replacement part for my SHW-M250S model, or at least use the (SHW-M250L) model part that I found on Amazon? The SHW-M250L parts look very similar to the one that I have. (That "L" could be a typo) If not, can someone send me a link to a site or place where I can buy ONLY the lcd screen and digitizer part for my exact model?
Thanks a lot in advance.
-Davin
The "L" supports CDMA, which you do not have, but my guess is they should all work, since they use the same screen. I could be wrong, though.
I would buy the international and if it doesn't work for your model - resell it. You can also try asking in the monster SHW-M250S thread.
By my guess, I think it should still be compatible because I doubt the screens have any major differences whether its a CDMA or GSM version. Neither do they affect the phones GSM or CDMA ability itself.
Sent from my GT-I9100 using XDA App
Hello!
I have a question for you about this phone. Well, I would buy this phone but in a shop which sells it, this phone has a flaw ..
The problem is that the screen is not showing, but reacts to the touch and turns, plays the sound.
Since the seller is not found out whether it displays the "image", which means the brick ..
I am an Xperii X8 but I would like to purchase Vibrant is why I ask you about it because I do not Wem or not you will need to replace the digitizer and now in my country there is no (Poland) ..
Using translate.google
Well, right now i have a SGS i9000. but im planning to buy a SGS II i9100 which someone sells it for 290$(converted already to our rate which is actually 12,000PHP on us).. i sell my SGS to my classmate for 240$ (which is 10,000PHP for us).
**what i want to know is how will i know if the device(that im going to buy) was not repaired or changed its hardware before? and i see that there are some Fake android phones out there. but the original ones have samsung sticker and NTC seal on the back of the phone and the NTC is around where the battery is.***
when im gonna buy it, ill make sure that it can be connect to Google Play, and has similarly with my phone, and connects to pc, and if the phone is properly working with Odin3.
It's just odd that it's quite cheap. because most people sells their SGSII 2nd hand for like 360~480$(converted on our rate).
thanks a lot for the help!
help plox?? TIA
My Galaxy 10.1 tab has suffered from the 'newton ring' screen defect for a while now (see http://forum.xda-developers.com/showthread.php?t=1130230 if you don't have long memories) but it wasn't too bad so I never got around to getting it fixed. Anyway, I had to take my phone into a Samsung service centre recently so I thought I'd get the tab done at the same time.
It's still within 2 years from purchase, but was bought in the USA so I was kinda expecting the warranty question to get raised. Nope, they took it fine, HOWEVER they now say that they can't repair it at all as they can't get the appropriate parts because the USA and UK models have different screens and they can't put a UK part into a US model. After a bit of further questioning they also said "and the software is different too", which is quite true but completely irrelevant to a pure hardware defect (and a known one at that).
Before I go and pick it up, could one of the experts here tell me if the physical screen and/or digitiser are any different between the original USA Galaxy TAB 10.1 (Wi-Fi only) and the original UK variant? I thought they were all made with the same generic parts in the same factories? Any part numbers or reference sources would be very helpful too. Thanks!
Andre
I have a UK tablet and i've never heard about different components lol.. I don't think there's a difference between the tabs, it's not that we have a different ROM that we also have different components, i came from android 2.3 UK and running cm10.1 now with a US bootloader on a UK device, problems, samsung?
Anyway,, i never suffered from those newton rings, i remember the link you posted, but i will not laugh too loud my tab is 1 year and 1 month old now
Thanks, that's very much my opinion too from everything I've ever read about this defect, the screen and digitiser are common components between the US and UK models.
If anyone can give me any more info or hard facts (e.g. do Samsung USA and Samsung UK have a spare parts website where I can compare part numbers?) that would help before I go back into the service centre around noon today. Thanks!
Andre