Sent from my Droid Razr using xda premium
Well, I'm not sure if that was a question or not but as far as I know you can't flash the kernel because of our wonderful locked bootloaders...
If you were to use the search function, you would see that there are modules and scripts available to overclock our CPUs. Our processors are already factory overclocked 200Mhz, the maximum I have been able to reach is 1.3Ghz
I was looking to under volt to save battery
Sent from my DROID RAZR using xda premium
You can do that as well
Sent from my XT910 using XDA
is it possible to undervolt by only setting it in one app?
without too much trouble, i'm not good in flashing files etc.
As far as I know, the only way is using scripts, and you can adjust the clock frequency in say.. SetCPU. But the voltage settings are only available in the script itself, if you check this post you can see there are scripts already made for under clocking / under volting.
Related
I downloaded nemisis's kernel 1200 OC and -50UV. it says the kernel is already overclocked. Does that mean i dont have to use setcpu? I never used any of these overclocked or undervolted kernels before. What instances do i need setcpu for?
You need to use setcpu. Its also useful for when u want to use different kernel governers or profiles under certain conditions.
Sent from my SCH-I500 using XDA Premium App
supafastsupra2 said:
You need to use setcpu. Its also useful for when u want to use different kernel governers or profiles under certain conditions.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
ok so then the enderst special oc 1200 mhz uv by -50mv kernel is basically useless unless i use that app then (minus the UV)? also what are the chances im gunna fry my processor if i keep this overclock kernel for everyday use?
Edit: also how hot is too hot for a battery to get? aka whats a normal range? also after heavy use (like after playing angry birds or tank hero)?
The battery in our phone (cobalt li-on) should never go above 130c. At above 150c you going to get thermal runaway and have a dead or exploded battery.
For a good article on lithium batteries see: www.buchmann.ca/article28-page1.asp
Sent from my SCH-I500 using XDA Premium App
supafastsupra2 said:
You need to use setcpu. Its also useful for when u want to use different kernel governers or profiles under certain conditions.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
The profiles are NOT compatible with Galaxy S phones, at least the Fascinate. Some may work for some people alright, but most people experience many different problems, I myself have problems with the profiles. I recommend against using them. Just use it for the governor/overclock.
I'm rooted, how do I undervolt? Is there an app available?
Sent from my Vibrant using XDA App
SEARCH XDA AND GOOGLE. There are prolly a dozen threads on CPU clocking for your phone. (I'm assuming you mean underclocking, right?)
Sent from my screaming Atrix *4G* using the XDA App
download a oc/uv kernel then install voltage control from the marker, I suggest eugenes dead horse kernel but that's just me.
btw Q&A
Tylerjd said:
SEARCH XDA AND GOOGLE. There are prolly a dozen threads on CPU clocking for your phone. (I'm assuming you mean underclocking, right?)
Sent from my screaming Atrix *4G* using the XDA App
Click to expand...
Click to collapse
Underclock is NOT undervolt
and to the OP, please post in the right section
gorealmighty said:
I'm rooted, how do I undervolt? Is there an app available?
Sent from my Vibrant using XDA App
Click to expand...
Click to collapse
You can start by posting in the correct forum. Q&A... General...
Yeah, that would be a good start.
Yes post in Q & A next time please.
There are many apps on the market that will do this. Under-volting is just lowering the voltage to the cpu. The voltage standard setting is set based on the voltage that will work best for all manufactured cpus in a unit. Most of these chips are "low-bid" so the Q/C is not that accurate, so they set the voltage a little higher to make sure they always perform. Most of the tech savvy people know they can lower that setting....... and do so to lower temp and add to battery life.
Underclocking is something else entirely That is the cycle clock speed......... 2 different animals.
tigersblood will compatible with voltage control app
Hey guys i'm new to overlocking, rooting and rom flashing on HTC phones. I have had motorola phones in the past,droid, droidx bionic,razr and have always rooted, overclocked and undervolted. Is there some way or app for the rezound that will let me adjust overclock speeds and voltage? I know there is setcpu but what i'm looking for is a app like milestone overclock that I used along with setcpu on my droid x?
incredicontrol
incredicontrol says its for "single core" htc devices only. Anything else?
CPU master from antutu is pretty worth it
Sent from my ADR6425LVW using Tapatalk
papapena25 said:
incredicontrol says its for "single core" htc devices only. Anything else?
Click to expand...
Click to collapse
Download the beta in the development section.
Or go to incredikernel.com and get incredicontrol beta 3
sent from my newly unlocked Rezound
Thanks guys
Does one need this even with a custom kernel such as ziggy's or dsb?
feralicious said:
Does one need this even with a custom kernel such as ziggy's or dsb?
Click to expand...
Click to collapse
If you want to change clocking speed or undervolt/overvolt from what the kernel Dev set the default to, yes. Otherwise you're not really taking advantage of the kernel. If a kernel is overclockable....Dev's usually leave the speed close to stock because some phones rspond differently.
System tuner pro is the best. Does everything. I use it and CPU master
Sent from my HTC Rezound
Hey all,
I've been using CPU Master on my Rezound since I rooted it. But I used to use SetCPU on my Dinc. My question is, which do you prefer? I have the free version of CPU Master and paid for SetCPU.
Sent from my ADR6425LVW using Tapatalk
I paid for setcpu too but I was having issues so i tried cpu master before buying it. least try cpu master and if it setcpu is better then get your refund
sent from my rezound using tapatalk
I've been using the free version of CPU Master since I've been rooted on my Rezound. I want to set profiles for my CPU but I don't want to pay for CPU Master if SetCPU will work
Sent from my ADR6425LVW using Tapatalk
well if setcpu works for you then stick with it. cpu master gives extra features
sent from my rezound using tapatalk
Extra features such as?
Sent from my ADR6425LVW using Tapatalk
Under/overvolting and io scheduler selection is really the only things it offers in the paid version. I've used setcpu on my og droid and on my incredible, but I bought CPU master when I got my rezound and I actually prefer it over setcpu. One thing I like is that the profiles are already set up for you, all you have to do is enable or disable them.
I've had really good luck with CPU tuner
Free and has a lot of features.
Under 8 posts for me so I can't post the stupid link... Just search for it in the market and check out the reviews.
If I wanted to undervolt, how far under should I go? My kernels have always handled voltage for me lol
Sent from my ADR6425LVW using Tapatalk
DbZ Gokuu said:
If I wanted to undervolt, how far under should I go? My kernels have always handled voltage for me lol
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
this varies from person to person. needs to be scaled right while you're finding the sweet spot. I do -25 for each frequency. run it for awhile to see if you get a random reboot or lag and just reverse what you did. I did -25 for each until I have time to drop them further
sent from my rezound using tapatalk
Thanks very helpful. Seeing how well the undervolting goes before I make my final decision
Sent from my ADR6425LVW using Tapatalk
Depends upon the kernel. I found SetCPU worked better with stock and Ziggy's kernel. With dsb's smartass v.2 kernel, I find CPU Master works better.
Yeah I know that each phone individually responds differently to cpu/voltage changes. The dinc i had before this would take any frequency and kernel would throw at it. However underclocking/volting on my Rezound almost always ends in fc's
Sent from my ADR6425LVW using Tapatalk
I use SetCPU mostly if I can... Provides more information than CPU master pro, I have both... The only thing that CPU master pro does that SetCPU doesn't is change voltages, in a crappy way though. I don't go through every clock to change them, that takes way too long. Instead I use incredicontrol to change them all simultaneously... I've never had problems with one over the other. They have both worked for me on all the kernels for this phone.
setcpu
I'm using Ineffabilis v1.0 with Ziggy's kernel. SetCPU has worked for me with no issues. I haven't tried CPU Master but I guess I haven't had the need to cuz SetCPU is working for me. I just don't completely get the whole undervolting. I understand the concept but don't know how to apply it with SetCPU, if that's even possible.
DbZ Gokuu said:
If I wanted to undervolt, how far under should I go? My kernels have always handled voltage for me lol
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
I haven't tried to play around with voltages on the rezound, but on my tbolt I could drop voltages 100 each and be fine, but couldn't run at 1.8 no matter what I tried.
DigiDave said:
I'm using Ineffabilis v1.0 with Ziggy's kernel. SetCPU has worked for me with no issues. I haven't tried CPU Master but I guess I haven't had the need to cuz SetCPU is working for me. I just don't completely get the whole undervolting. I understand the concept but don't know how to apply it with SetCPU, if that's even possible.
Click to expand...
Click to collapse
You can't change voltage with SetCPU. CPU Master can. Correct me if I'm wrong but kernels can also effect voltage. Amirite?
DbZ Gokuu said:
You can't change voltage with SetCPU. CPU Master can. Correct me if I'm wrong but kernels can also effect voltage. Amirite?
Click to expand...
Click to collapse
I was assuming that SetCPU didn't control the voltage... thanks.
I want to mess around with overclocking and voltage control for extended battery life on an already amazing phone. I rooted thats it. I tryed my Droid overclock which doesn't support my kernal so i'm wondering if there is a cpu overclock app that will allow me to tweak the voltages and overclock on the stock kernal.
JiggaGeazY said:
I want to mess around with overclocking and voltage control for extended battery life on an already amazing phone. I rooted thats it. I tryed my Droid overclock which doesn't support my kernal so i'm wondering if there is a cpu overclock app that will allow me to tweak the voltages and overclock on the stock kernal.
Click to expand...
Click to collapse
i think there is something.. have a look at the eternal project site. dont have exact link on me but if you put eternal project in Google it should be the first link there.
hope its of any help!!
http://forum.xda-developers.com/showthread.php?p=23545423
Though I wish this wasn't true, but I don't think that our phone can undervolt overvolt on the stock kernel.
Stupid Motorola.
Sent from my DROIDRAZR using XDA
http://www.android-hilfe.de/showthread.php?p=3081859
Don't be shocked, it's an German Page. But the Links Guide you to the OP's and you got all files in one package.
Zip is linked...
HSD-Pilot said:
http://www.android-hilfe.de/showthread.php?p=3081859
Don't be shocked, it's an German Page. But the Links Guide you to the OP's and you got all files in one package.
Zip is linked...
Click to expand...
Click to collapse
This allows undervolting and overvolting? Or just overclocks the processor?
Sent from my DROIDRAZR using XDA
Leviathan26 said:
This allows undervolting and overvolting? Or just overclocks the processor?
Sent from my DROIDRAZR using XDA
Click to expand...
Click to collapse
Yes it does. Go read the original post over at droidrazr.
http://www.droidrzr.com/index.php/topic/830-overclocking-your-droid-razr/
Overclock, Eternity Hotplug (Governor) & vr scheduler by Eternity. Just a little play around.
On Rootzwiki you can find the boostedass 2 Governor.
He asked for Overclocking in OP, so I just posted some Tweaks I've already played with. I liked the Eternity Hotplug.