I know this seems like a dumb question but I assure you there is some logic to it.
My dopey friend started to unlock his Prime, but his connection via USB came undone and he says that the unlocking "failed". He came to me asking if it worked or not. I'm no expert, but I am curious.
Here are the variables:
1. When I attempt to run Unlock Device, everything prompts you like it's never been done.
2. When booting with power and voldown, it quickly flashes something like "android userh bootloader version 1.20 us_eepad blah blah" then gives the option for cold boot or wipe data.
3. ROM manager doesn't have CWM installed and when selecting boot into recovery, it simply restarts the device.
The device seems to be rooted though.
Thoughts?
Contact Asus through e-mail or phone call, give them the serial number and ask if it's unlocked.
Or see if you can download the OTA update, if it bricks, then it's unlocked.
If it does not give you the fastboot option together with wipe data and cold boot it is not unlocked
There should be a file called Unlock_Time.txt on your tablets memory.(at least I think that's created when you unlock the device)
Related
Just as the title states...
I have completed the process on the HTCDev site many many times. The process itself works fantastic. Each step responds exactly how they state it should. I submit the token code and get a Bin file. Using fastboot to flash the Bin file results in the phone prompting me to unlock the bootloader. I select yes using the volume up and then hit power. The phone powers off and reboots restoring everything to factory. So it would seem that everything works correctly. I get no error messages during the process. I get nothing but the results that I should be expecting...EXCEPT...
The bootloader remains locked.
I'm beyond frustrated at this point. I've followed every single set of instructions just thinking maybe there's a step missing in one of them. Yet they all perform the same. End result...Bootloader still locked. No idea what is going on. Called HTC Tech Support and they weren't any help at all. Basically they said to leave a comment on the HTCDev site.
Any ideas???
Have you tried flashing anything even though it still says locked? It is a longshot, but there is a chance it is unlocked but just still says locked.
rultin said:
Just as the title states...
I have completed the process on the HTCDev site many many times. The process itself works fantastic. Each step responds exactly how they state it should. I submit the token code and get a Bin file. Using fastboot to flash the Bin file results in the phone prompting me to unlock the bootloader. I select yes using the volume up and then hit power. The phone powers off and reboots restoring everything to factory. So it would seem that everything works correctly. I get no error messages during the process. I get nothing but the results that I should be expecting...EXCEPT...
The bootloader remains locked.
I'm beyond frustrated at this point. I've followed every single set of instructions just thinking maybe there's a step missing in one of them. Yet they all perform the same. End result...Bootloader still locked. No idea what is going on. Called HTC Tech Support and they weren't any help at all. Basically they said to leave a comment on the HTCDev site.
Any ideas???
Click to expand...
Click to collapse
Since it's getting wiped anyway, exchange the phone for a new one.
MrSmith317 said:
Since it's getting wiped anyway, exchange the phone for a new one.
Click to expand...
Click to collapse
I second that, I had a problem Unlocking my Rezound, I called HTC they said they dont replace phones and to call VZW. I called VZW told them that HTC told me to call for a replacement, they gave me a hard time. I told them as a developer, not being able to unlock my phone is a detrimental to my livelyhood. They sent me a refurb (standard) and I had no problems unlocking it. I posted my saga over in general you can see it here http://forum.xda-developers.com/showthread.php?t=1416472
can't factory reset = lock pattern + unknown gmail + "*** LOCKED ***" bootloader
First off, let me clear the obvious: this phone isn't stolen. I purchased it a few days ago off of eBay (item #271070275773) and took it to Verizon who verified that it hadn't been reported stolen. The LCD was smashed so the previous owner sold it for parts and was unable to reset/un-lock the pattern. (And the seller says they don't know it.)
I fixed the LCD/digitizer and discovered this infuriating pattern lock. I assumed that, like my other Thunderbolt, I could simply do a factory reset or throw some PG05IMG.zip onto it, or SOMETHING... but nothing I've tried so far works. (That is to say, it just does a normal boot to the lock screen -- or goes into an equally infuriating reboot loop that just repeatedly ends at the green-on-white HTC logo.) I assume it has everything to do with the fact that, at the top of the "skateboarding" screen, it says in capital pink letters: *** LOCKED *** -- please note it doesn't say "security warning" as I've seen in most of my searching. But then again, I could be totally completely wrong.
Can anyone shed some light on my situation? I'm new to modding Android devices, but am good friends with Google when I know what exact terms to ask him.
I think you would need to take it a step further than just a factory reset as that would leave behind some system information such as security. It sounds like you would need to completely wipe everything and flash a rom but to do that you would need to enable USB debugging which you cannot because of the pin. I have heard there are ways to get past it but I don't know how many retries you would get in order to do that.
Sent from my Thunderbolt using Tapatalk 2
I think this might help you out: http://forum.xda-developers.com/showthread.php?t=1310014
Basically, you use adb and fastboot to flash a full RUU which will completely unroot, wipe, destroy everything you've done. The post has a lot of information and some seems a little confusing, but follow along and I think you will be OK.
So my daughter got a hold of my phone. "I think" she tried entering the password too many times. Now phone just displays:
Just my Background Picture and this message below.
"To unlock, enter recovery password"
______________________________
Under this message is a Emergency Call button.
I tried my phone password, google password, and Outlook password. All not working. After entering my password, and it is incorrect I get this message:
"You have incorrectly attempted to unlock the phone 1 times. The phone will now be reset to factory default" OK button. (DONT CLICK OK, Just restart phone by holding down power button)
I then just power off and restart. After restart -> Samsung logo -> Verizon logo, it goes back to the "To unlock, enter the recovery password" screen.
Don't want to go to factory default, Any help or suggestions???
Verizon Samsung S3
Verizon just pushed out the KitKat update to my phone last month.
NOT rooted, just stock Verizon ROM.
I can call this cell. I still works. But can't get to regular unlock screen. Always just goes to this Recovery password screen.
Do a hard reset.. no another way
Really... Is there no Default "recovery password". I don't remember setting one up. Any Google work around? I tried searching online, and I don't see anything about this "Recovery Password"... Is this new or do people just not get to this screen?
Well, if there is any Odin-flashable recovery for your phone, you can flash it and then pull important data using ADB. You can also take a Nandroid backup and then use Nandroid Manager to see if you can recover any more data from the ROM.
This will void your warranty.
Bingo... So if anyone is still having this issue, you DON'T have to do a factory reset. I finally solved it (at least it worked for me). Here's how I did it. You need a Google account setup already for this phone. Go to: wwwgooglecom/android/devicemanager (add dots, come on xda, I'm not a newbie -> join in 2009) I tried to Locate and I tried to Ring, they both worked, but you need to do this -> Click the LOCK icon. Then it will try to find your phone. If it does find it, it will ask for a NEW password to "LOCK" your phone. After entering your password, your phone will "LOCK" itself. (Even though it has been locked out already) Once that is done, I went back to my phone and try entering this "new" password I setup in the: recovery password location. It works. Good luck...
Not sure how to mark this Thread as Solved...
Bloody Legend!!
You wanted to say thanks mate.
My S5 has presented me with this screen twice, in the past week! The first time it wiped my phone (and SD card).
Happy New Year!!!
J.
Going to wwwgooglecom/android/devicemanager doesn't work anymore. Now when you try that process, you will get a pop-up saying that the device is already locked and the new password you put in will not be used. You are still required to put in the old Recovery Password. I have wiped the phone and tried to find where one would put in a recovery password and cannot find it.
I contacted Samsung and they told me to use their system. Go to findmymobile(dot)samsung(dot)com and log in (assuming you registered). I logged in, went through the process to unlock my phone. I could see the notification that the unlock was successful, but the lock is still in effect. Samsung support said I would have no other option than to wipe the phone again. I asked how I could get support for the Android lock that was in effect, and they referred me to support(dot)google(dot)com. If you go there, and work your way through the menu, you find that the manufacturer of the phone is supposed to handle Android OS support.
So Samsung has added a proprietary remote unlocking feature, but somehow forgotten to disable the built-in one. Since they have that extra "feature" they won't support the default one.
Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Kenvarus said:
Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Click to expand...
Click to collapse
how did you unlock bootloader and did you ever figure out how to root it? going through same thing now.
Kind of an old thread and old device now, but I own one myself (branded Packard Bell) and just figured this all out, so here goes:
Root
This one is really easy now thanks to a MediaTek flaw. Just go to https://github.com/JunioJsv/mtk-easy-su, download the latest release, install the APK on the device, and run it by opening the app and pressing the button in the lower-right corner (still works on this since the latest security patch level AFAIK is from 2017). Note that this gives root temporarily, so you will need to run it again after reboot if you want root again.
Bootloader Unlock
When Kenvarus said "easiest bootloader on the planet", I took a guess at the method and it worked:
Back up any important data on your tablet, as this will factory reset it.
Install ADB and Fastboot on your computer if they are not installed, including drivers. For Fastboot (as that can be tricky sometimes), it "just worked" for me and I think Windows used an Amazon driver I had installed for my KF2. YMMV.
If you haven't already, enable Development Settings by going to Settings->About tablet and tapping the build number 7 times.
Go to Settings->Developer options (switch them on if they're off) and enable the "OEM unlocking" toggle.
In the same menu, enable "USB debugging" if it is not enabled already.
Connect the tablet to your computer, confirming the authorization prompt that pops up if it wasn't connected before. Check whether the connection is good with the "adb devices" command if needed.
Run the command "adb reboot bootloader", this gave me a blank screen.
Use the "fastboot devices" command to make sure the Fastboot connection works.
Run the command "fastboot oem unlock".
Press Volume Up when the text-mode confirmation screen pops up on the tablet.
Once the unlock procedure is complete, reset the tablet. You should see text on your bootscreen saying "Orange State" and a factory reset on the first reboot if it worked.
WARNING: I highly recommend charging your battery to be at least 10-20% filled before doing this. I stupidly did this at 1% battery thinking "it's plugged in anyway" and had quite the time rebooting after unlocking the bootloader (I thought it was bricked for a good hour or so, only after walking away for 20 minutes to eat dinner did I see that the battery was now at 20% and I could boot the tablet).
After unlocking the bootloader and temp-rooting it with the above app, I was able to use Magisk to patch the boot image (using dd to shuttle the files to and from /dev/block/mmcblk0p10, use "strings saved_boot_partition_name|head -n1" and check for "ANDROID!" to make sure it's the right partition) and I now have persistent root after all these years (note that Direct Install in Magisk doesn't work here). I'd definitely be interested in a custom recovery and/or ROMs for this device, but I'm not holding my breath (I'd take a crack at it if I knew better how to do it, but I have near-zero experience with ROM development and so far have only recompiled existing ROMs for a few phones).
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
SM-T227U is an American model wich doesn't have the OEM unlocking option, you could unlock using unofficial ways but those are not pretty "stable".
coocooguy246 said:
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
Click to expand...
Click to collapse
Hey man! Still got your tab 7? I also have a SM-T227U and have oem unlocked! After doing the usual stuff, you will want to turn off automatically update in developer settings. After that, go to settings>General management>Date and time and select manual time and date, and set it for exactly 10 days before the day you attempt this. OEM unlock will appear in dev settings!!!
Then turn off device and while holding power up + power down, plug into PC. It will show the pre-download mode screen where it asks if you want to continue. Just follow the on screen instructions to unlock bootloader!
*note that the bootloader unlocking results in an unavoidable factory reset**
evan5935 said:
Hey man! Still got your tab 7? I also have a SM-T227U and have oem unlocked! After doing the usual stuff, you will want to turn off automatically update in developer settings. After that, go to settings>General management>Date and time and select manual time and date, and set it for exactly 10 days before the day you attempt this. OEM unlock will appear in dev settings!!!
Then turn off device and while holding power up + power down, plug into PC. It will show the pre-download mode screen where it asks if you want to continue. Just follow the on screen instructions to unlock bootloader!
*note that the bootloader unlocking results in an unavoidable factory reset**
Click to expand...
Click to collapse
Sweet! I will absolutely try this when I get home this afternoon, will report back with results!
But just for clarity. Let's say I start with a freshly wiped tablet. Go through set up and connect to wifi, do I need to add a Google and Samsung account? Then in dev settings, enable USB debugging, also enable wifi debugging? Then change the date. Is there any step I am missing?
coocooguy246 said:
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
Click to expand...
Click to collapse
If it has Mediatek chipset then you can use SP flash tool to format the tablet firmware and reflash it.
I would strongly recommend you to backup the NV DATA and NVRAM files before you format the tablet.
coocooguy246 said:
Sweet! I will absolutely try this when I get home this afternoon, will report back with results!
But just for clarity. Let's say I start with a freshly wiped tablet. Go through set up and connect to wifi, do I need to add a Google and Samsung account? Then in dev settings, enable USB debugging, also enable wifi debugging? Then change the date. Is there any step I am missing?
Click to expand...
Click to collapse
You can follow this guide actually! ( https://forum.xda-developers.com/t/...220-t225-install-lsposed-magisk-mods.4406933/) it recommends just skipping the setup junk
I have found that many times, rooting methods work across different models of the same device unless there are some sort of major differences in chipsets or some sort of random change lol
The only thing that doesn't seem to work for our model is section V of the guide which is for the removal of the "bootloader is unlocked" screen at startup. so you will still need to press the power button on that screen to boot up. It's a tiny hassle, but otherwise no big deal in my personal opinion
Make sure to read all the way to the end of the root section (section 4) and especially remember step 7. I retried probably 4 times and even patched the entire AP file of the firmware for use in odin (doing this gives a second warning on Knox screen that it isn't samsung official fw then boots normally into the bootlogo screen) before realizing everything was going fine.. I recommend just using the patched Magisk boot.img first just because I find it unsightly
Just flash the boot.tar in the AP slot. Don't download any of the boot imgs from the guide because they are for the t220's and t225's. I'll link the one I made according to the guide below. It'll save you some time and you won't need to install zarchiver and Magick just to have it factory reset again lol. Just download the latest Magisk apk (26.1) from the official github (https://github.com/topjohnwu/Magisk/releases) and install it when you have completed the 2nd factory reset/the patched boot img install.