hello to everyone. I have a problem with my device. When I am running apps such as facebook, after 5 minutes of usage or after 10 15 minutes, the screen freezes, I cant press anything and after 8-10 seconds the phone reboots by itself:-(. I cant find the reason. Here are my device settings
CPU Settings:
Governors: ONDEMAND
Min CPU Freq: 122 MHz
Max CPU Freq: 691 MHz (i was using 729 I thought reducing this one, would fix my problem.)
About my phone:
Kernel Version: 2. 6. 29. [email protected] 1
Mod Version: Froyo MiniCM/CMv6 Hybrid by slade87 and owain94. v6.0
Where is the problem???
any background apps running?
you are using really outdated rom, probably you will have better overclocking possibilities with newer roms and kernels.
and try returning to default cpu values and see if it reboots.
Related
Hi!
I was just wondering if anyone could tell me what the best setCPU settings for HD2, with respect to battery life and stability(no lag), are?
I've been searching for the answer on many forums but haven't been able to find a definite answer.
Thanks for your thoughts and recommendations!
Personally, I don't see the need for setCPU. I get no more than 7mA drainage per minute when in standby and my phone is already as fast as I'll ever need it to be. Am I missing something? I can easily get 30+ hours out of my phone with moderate to heavy usage.
Oh, I've had these same battery results on Shubcraft, SuperHD2, Hyperdroid, Bangsters, and the new Desire HD ROM.
Chuckydroid ROM
2.12 Radio
Stock 16gb microsd
Max to 245
Min to 245
That will guarantee long battery life
You really should search tho
Sent from my HTC HD2 using Tapatalk
setCPU Settings
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
I agree with alpinestars
i think ondemand is bit buggy the kernel dont choose the right Scall
sometime its choose 1000mhz with 20% cpu used that is wasting
my setting in adv
Up Threshold 55
down "" 50
freq step 20%
screen off
245-384 interactive
battery 1.5%ph [4 hours test]
its might be laggy a bit from idling to full using like watching movie
but its should stop after 100ms berrly noticeable
Question
Ok BIGGGG newbie question i know but i got to ask this lol, what do you mean by governor=interactive? I mean i know how to use setCPU been using it for a while now but...i don't seam to have that scaling.
I'm using setCPU 2.0.3 full version.
is there a kernel with higher max clockrate than 1190 ??
Ahmun_Ra said:
Ok BIGGGG newbie question i know but i got to ask this lol, what do you mean by governor=interactive? I mean i know how to use setCPU been using it for a while now but...i don't seam to have that scaling.
I'm using setCPU 2.0.3 full version.
Click to expand...
Click to collapse
It depends if its activated in the kernel you are using.
Sent from my HTC HD2 using XDA App
souljaboy said:
is there a kernel with higher max clockrate than 1190 ??
Click to expand...
Click to collapse
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
I dont see Interactive on my SetCPU, I see:
Conservative
Ondemand
PowerSave
Userspace
Performance
Do I have a different version?
SetCPU 2.0.3
gattaca714 said:
I dont see Interactive on my SetCPU, I see:
Conservative
Ondemand
PowerSave
Userspace
Performance
Do I have a different version?
SetCPU 2.0.3
Click to expand...
Click to collapse
What kernel and Android are you running? Some Android build has interactive while others don't.
Ahmun_Ra said:
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
Click to expand...
Click to collapse
making a fryed egg out of this crap would be the best thing i do
I have an easier solution.
Just send it to me and I'll send you a fried egg --postage paid.
jamesbryant said:
I have an easier solution.
Just send it to me and I'll send you a fried egg --postage paid.
Click to expand...
Click to collapse
+1
I could have a better use for it, I am not into eggs anyway.
Ahmun_Ra said:
That i know No there is not, its the higher safe clockrate of the HD2. Higher is trying to make your phone a fryed egg lololol
Click to expand...
Click to collapse
Seen pics of a Milestone @1400
now thats crazy as they begin with a 600Mhz
I found that 245max 245 min setting in screen off is not a good setting
i use 576 max/min in screen off makes a result that only 1% drop in 75 min
i test it last night when i sleep hehe (average 3-7 ma)
Try these settings I posted in the thread "If you're using setcpu, try these profiles."
Tomorrow I am going to test a set up I just made. It should be called the Step Setup.
The purpose of this setup is to trying to keep the phone running smooth while being proportional and saving battery. This is my first attempt so I will be tweaking it as I test it and receive input.
Keeping the same priority settings as I have listed is crucial because if the order is out of place it will not downclock at the right time.
Here are the settings:
Main - Max:1036 Min:245 Scaling:Interactive (set on boot checked)
Profiles
Screen off - Max:245 Min:245 Scaling:Interactive Priority:100
Battery<10 - Max:384 Min:245 Scaling: Interactive Priority 75
Battery<15 - Max:422 Min:245 Scaling:Interactive Priority 70
Battery<20 - Max:499 Min:245 Scaling:Interactive Priority 65
Battery<30 - Max:576 Min:245 Scaling:Interactive Priority 55
Battery<40 - Max:614 Min:245 Scaling:Interactive Priority 45
Battery<50 - Max:652 Min:245 Scaling:Interactive Priority 35
Battery<75 - Max:768 Min:245 Scaling:Interactive Priority 10
Battery<85 - Max:883 Min:245 Scaling:Interactive Priority 0
Advanced - Min Sample Rate:20000
This should be speedy and give great battery life. If your kernel doesn't allow Interactive scaling try setting everything to On Demand and in the advanced tab set the Up Threshold to 30.
EDIT: Using this with a combination of the VBN Android Rom has achieved some insane battery life. Yesterday I listened to music for a majority of the day, on and off, using the internet a few times and texting and when I went to bed the battery was around 30%, and that was around 12 hours of having my phone on me. My battery is old and has been charged a lot, a new battery or extended battery would provide crazy results.
Click to expand...
Click to collapse
2.14 Radio, Mdeejay Evo Sense
alpinestars said:
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
Click to expand...
Click to collapse
Hey thanksz but i dont think u can set your advanced settings without the main profile being on governer=ondemand.
alpinestars said:
~~~~CREDIT GOES TO BANGSTERS~~~~
on main screen:
max 1190
min 245
governor = interactive (better than ondemand)
profiles:
Enable it
Add profile:
Screen Off
Max 245
Min 245
Priority 100%
interactive as well
Add profile:
Battery <40%
Max 768
Min 245
Priority 80%
interactive as well
Add another profile:
Advance Tab
Min Sampling Rate = 50000
Enable it
Remember aside form this set spare parts windows animation and transition animations to FAST
And in ADW launcher, set the following:
screen preferences -> desktop scrolling speed around 50 - 100
drawer settings -> zoom effect speed 325
drawer settings -> fade app labels unchecked
system prefernces -> scrolling cache auto
Hope this helps.
Click to expand...
Click to collapse
i tried pm'ing you but you need to change your pm setting to recieve message
Changed pm settings
i am running Frankin_final and a voodoo kernal and i wanted to know what i should run in SetupCPU i just downlaoded it and would like to know a good setting to optimize my phone to the max. The Kernal i am running is Voodoo_ocuv_cwm_v1.1
1200 Max, 200 Min with scaling set to conservative.
I also created a profile for when the screen is off, to be 600 Max and 200 Min.
thank you i am running that now
Could anyone please tell me the settings and profiles that will give my x10 mini the best battery save? thanks
actually there is already a preset for that ..the "powersave" one..
Easy, just put both bars in 122880MHz..
Your phone are going to be rrrrreeeaaaallllyyy slow, but you save lots of milliamps
Use ondemand only. And set min to 122 and max to 600.
I use a profile when screen is off that set min to 128 and max to 320, ondemand too.
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Has anyone had problems with random freezes and reboots with SetCPU installed? I've had a couple random reboots, so for now I've uninstalled SetCPU to see if the problem goes away. I also have Advanced Task Killer installed but it wasn't set to kill tasks automatically.
raiderkilo said:
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Click to expand...
Click to collapse
Setting SetCPU like that is not very smart. For example, You have Your screen off, someone is calling You, what happens? You get the call ringer after few seconds (sometimes even 10-15!). Reminds of old Symbian versions? But just this. Next example - You have Your screen off, and You receive sms. What happens if You are using Handcent, and have to go to the app manually after phone wakes up? It takes ages... But if You have more than 1000 massages in Your inbox, and a new one come, and You get it after screen wakes up it can even lead to a reboot.
Lets add some random weird situations if You are listening to Your player while the screen is off... using some third party apps, etc...
Setting the minimum CPU for the screen off is not a good idea. Don't do that, or the phone will fail You in most unwanted cases.
so what are you guys using?
I am 122-600 on normal ondemand
and screen off on 122-256 ondemand
Anyone with better profiles?
just dont overclock!!!
why not? I see you are running 729/600.
WHY is your min 600?
Use smartass governor - auto profile, just upgrade to gingerbread.. best profile yet..
Set normal use 122Mhz-729Mhz 100% Priority
Set for charging: 122Mhz-245Mhz (or similar) - 100% Priority
Set for screen off 122-245 (or similar) - 100% Priority
^ this saved me battery when I used my phone for so much else besides calling and texting.
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
achyut said:
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
Click to expand...
Click to collapse
Only a handful devices supports being clocked to 825Mhz but it's very dangerous.
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
ruifung said:
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
Click to expand...
Click to collapse
Some have succeeded, but I doubt their phones lasted very long after that.
Just wondering, is the phones processor under the right side of the keyboard? cause after a few minutes @ 710Mhz, that area is hot. Since I switched to the smartass governor, it rarely is hot anymore (due to the fact it mostly spends time @ 245/320Mhz
Um... question?
Shouldn't the phone go into deep sleep when the screen is off with no cpu activity?
Also install cpu spy and see what the cpu is doing for how long.
https://market.android.com/details?id=com.bvalosek.cpuspy
1. The cpu does not make the most heat... it's the 3G radio.
2. Cpu should deep sleep automatically.
My OC prifile for mini pro:
Standard profile- 122 - 825mhz
If Battery < 15% then 122 - 600 "this gets rid of crashes due to low power OC"
Also.. i asked some of the developers that made the modules for overclocking and undervolting.
It's undervolting there is no upward voltage bump so it can't really nuke a cpu.
But you can nuke the power circuits if you use heavy internet on 3G and charge at the same time.
How can I put over 600 Mhz?
My SetCPU makes 600 Mhz the max. I want to put just on 700, but I can't. What is the problem?
@Felimenta97:
You don't have any overclock-enabler module installed/insmodded or if using any CM-based ROM, the corresponding setting is disabled.
I'm using smartass with 122-320 for screen off and ondemand with 320-729 for normal, no problems so far
The max MHz I could get was 729MHz, 748MHz worked but after some time the CPU got 'pegged' as said in the logcat
Tried the 825MHz setting that only caused a freeze and boot loop, forcing me to do some fast adb commands to get rid of the overclock
Hello,
I have a samsung galaxy s2. I'm having a problem as stated in the title. Here is what i did to my phone :
- Android 2.3.6 KI5
- Rom RevoHD 4
- Kernel Siyah 2.5.1
- SetCPU Screen Off profile : 200-500 conservative.
- i haven't installed many apps.
I also undervolted a bit :
1200MHz - 1200mV
1000MHz - 1100mV
800MHz - 1000mV
500MHz - 900mV
200MHz - 850mV
Apparently if i leave the wi-fi on and let the screen turn off for about 1 hour, the phone will not wake up. I can just soft restart it by holding the power button. but i don't have such problem if i turn off wi-fi first. it is really annoying. does anyone have any idea how to fix this?. Thanl you.
dullahan263 said:
Hello,
I have a samsung galaxy s2. I'm having a problem as stated in the title. Here is what i did to my phone :
- Android 2.3.6 KI5
- Rom RevoHD 4
- Kernel Siyah 2.5.1
- SetCPU Screen Off profile : 200-500 conservative.
- i haven't installed many apps.
I also undervolted a bit :
1200MHz - 1200mV
1000MHz - 1100mV
800MHz - 1000mV
500MHz - 900mV
200MHz - 850mV
Apparently if i leave the wi-fi on and let the screen turn off for about 1 hour, the phone will not wake up. I can just soft restart it by holding the power button. but i don't have such problem if i turn off wi-fi first. it is really annoying. does anyone have any idea how to fix this?. Thanl you.
Click to expand...
Click to collapse
Remove the UV settings and try it again
zelendel said:
Remove the UV settings and try it again
Click to expand...
Click to collapse
And the screen off profile. If your phone needs to do something when the screen is off, let it do it.
I have a Tablet: AMPE A86 with following details:
Android Version: 4.1.1
Kernel version: 3.0.8+
My tab has a bad issue of frequent freezing and reboots. After searching for several months I found that, it has issue in it's kernel (or something like that) and CPU. I have used SetCPU and setting the governor "Performance" solves the freezing issue and works smoothly (No more freeze and reboots). Other governor setting cannot stop the frequent freeze issue. but problem is that setting the governor "Performance" it become too hot and drains the battery too fast. I have used "Profile" menu to control the heat like below:
Screen Off
CPU 1608-252, Governor powersave
Priority 100,Exclusive
Charging Any
CPU 1608-252, Governor performance
Priority 95, Exclusive
Battery <=35%
CPU 1608-252, Governor powersave
Priority 90,Exclusive
But it does not reduce the heating issue still in Screen off. Another thing is that, in my tablet it does not identify the Temperature of the CPU (always shows 0.0 C).
Can someone help to to resolve my issue as I am suffering with this tab for last 1 year. I also have tried the Oma's CM10.1 and AOSP 4.2.2 with no luck. Can anyone provide me any better kernel or any solution for my problem?