Last night I went to reboot into recovery and my phone now sits at the Galaxy S2 splash screen and won't boot up. Tried plugging it in powered off and it won't even go into charging mode. The battery picture just comes up and the little spinning wheel keeps going.
So Ive been trying for the last hour to reflash the phone back to stock using both Entropys return to stock guide as well as the 'How to return your phone to the store' guide too and no luck.
Heimdall of course as always just flat out doesn't work so I hooked it up to my laptop and ran Odin. Odin connects to the phone fine and the box turns yellow, but the minute I hit start, it just gives me this:
<ID:0/008> SetupConnection..
<ID:0/008>
<OSM> All threads completed. (succeed 0 / failed 1)
I even tried the one click ICS leak from Rootzwiki and the same thing.
I can get the phone into Download mode no problem but man I cannot get it to flash ANY of these rome!!
Any advice or should I just take it to an ATT store on the way home from work??
I got it around the second week of February so hopefully worst case scenario I can still exchange it..
Im at my wits end here, can't do anything with it!!
I had same problem with my sprint Gs2, I took it into the store they told me since I rooted they couldnt help me. But the guy said go into download mode and root it again, it will remove anything and everything off it. Idk if that's what you want though. It got my phone back up and running
Sent from my SPH-D710 using xda premium
Ahh forgot to add I can't get into Recovery anymore.
No clue what happened. I can get it into Download mode but not Recovery.
If I could've gotten into Recovery I could've just flashed my Nandroid last night and fixed it hehe..
ODIN requires Download mode, not recovery mode. If your phone can indeed go into download mode as you claimed, you should be able to flash any ODIN flashable ROMs.
Try flashing just a kernel with recovery
Sent from my GT-I9100 using Tapatalk 2 Beta-2
You didn't say what you were running before the problem occured. Or if you did anything just before. Need more information to be able to troubleshoot the problem.
You might try flashing Entropy's DD kernel only with odin. He has at least one tar in his DD thread OP.
It may be that one of the components, such as param.lfs is screwed, but it would be better to have more information first before just randomly trying to flash things.
You can find most everything you might need in the Download Repository.
creepyncrawly said:
You didn't say what you were running before the problem occured. Or if you did anything just before. Need more information to be able to troubleshoot the problem.
You might try flashing Entropy's DD kernel only with odin. He has at least one tar in his DD thread OP.
It may be that one of the components, such as param.lfs is screwed, but it would be better to have more information first before just randomly trying to flash things.
You can find most everything you might need in the Download Repository.
Click to expand...
Click to collapse
Yeah sorry about the lack of info hehe! I made the thread about 20 minutes before I had to go to work and spent the hour before that trying to fix it hehe.
Anyways, I WAS running the ATT ICS leak that Task and Fenny packaged up with CWM. I WAS going to get everything backed up and attempt to move over to CM9 when it went to crap.
So far what Ive attempted to flash with Odin was the following with no luck:
Entropys 'Return to Stock' PDA.tar (the UCKH7_stock_odin with root)
ATTGalaxyS2Unroot_SGH-i777.tar
The leaked ATT Odin one click flasher from Rootzwiki (same results as using regular Odin with any of the above)
I did in fact also download the I777UCKH7-CL503881-Parts-NoBL.7z from creepys 'How to prepare your phone for return to the store' thread BUT..
The instructions tell you to unpack the 7z and then run the one click .exe inside but there is no .exe in the archive. Just the modem.bin, cache.img, image, factoryfs.img, and hidden.img. This would've been fine to try but of course Heimdall is every Mac OS users enemy and anytime I try to use the front end I get a 'missing firmware.xml' error and running it via command line just never connects to the phone.
Since Entropys return to stock package only has the factoryfs.img and zimage, sounds like I need to find a complete tar file that has all the other parts that creepy's has in it..
Last thing I did before going to work was updating the USB drivers on my Win 7 laptop to see if that would help, but since I can only use my laptop via Remote Desktop Connection from my Mac (display is dead) I had to do a Windows Update so I could get the laptop to restart (which I don't think you can do through RDC unless I missed it), and I had to run to work before it finished..
And I was STILL 10 minutes late hahaha!
So the laptop JUST got rebooted now that Im home, Im going to go see if theres also a newer version of Odin, and Im gonna go dig through the Download Repository and also check that Samsung Firmwares site to see if I can find myself a complete tar ball of the stock 2.3.4 firmware..
Ive got Saturday off finally so if I can't get it flashed and fixed by then I think Im going to bite the bullet and just take it to an ATT store and see if they'll swap it. Hopefully theres no 30 day policy, because Im pretty sure my Blackberry crapped out on me about 2 months in and they had no problem sending me another in the mail.. I REALLY wish I had my MyBackup done on my external SD card and not the internal one.. Gotta put another 40 hours into grinding in all my Zenonias to get back to where I was hehe..
Slavestate said:
Yeah sorry about the lack of info hehe! I made the thread about 20 minutes before I had to go to work and spent the hour before that trying to fix it hehe.
Anyways, I WAS running the ATT ICS leak that Task and Fenny packaged up with CWM. I WAS going to get everything backed up and attempt to move over to CM9 when it went to crap.
So far what Ive attempted to flash with Odin was the following with no luck:
Entropys 'Return to Stock' PDA.tar (the UCKH7_stock_odin with root)
ATTGalaxyS2Unroot_SGH-i777.tar
The leaked ATT Odin one click flasher from Rootzwiki (same results as using regular Odin with any of the above)
I did in fact also download the I777UCKH7-CL503881-Parts-NoBL.7z from creepys 'How to prepare your phone for return to the store' thread BUT..
The instructions tell you to unpack the 7z and then run the one click .exe inside but there is no .exe in the archive. Just the modem.bin, cache.img, image, factoryfs.img, and hidden.img. This would've been fine to try but of course Heimdall is every Mac OS users enemy and anytime I try to use the front end I get a 'missing firmware.xml' error and running it via command line just never connects to the phone.
Since Entropys return to stock package only has the factoryfs.img and zimage, sounds like I need to find a complete tar file that has all the other parts that creepy's has in it..
Last thing I did before going to work was updating the USB drivers on my Win 7 laptop to see if that would help, but since I can only use my laptop via Remote Desktop Connection from my Mac (display is dead) I had to do a Windows Update so I could get the laptop to restart (which I don't think you can do through RDC unless I missed it), and I had to run to work before it finished..
And I was STILL 10 minutes late hahaha!
So the laptop JUST got rebooted now that Im home, Im going to go see if theres also a newer version of Odin, and Im gonna go dig through the Download Repository and also check that Samsung Firmwares site to see if I can find myself a complete tar ball of the stock 2.3.4 firmware..
Ive got Saturday off finally so if I can't get it flashed and fixed by then I think Im going to bite the bullet and just take it to an ATT store and see if they'll swap it. Hopefully theres no 30 day policy, because Im pretty sure my Blackberry crapped out on me about 2 months in and they had no problem sending me another in the mail.. I REALLY wish I had my MyBackup done on my external SD card and not the internal one.. Gotta put another 40 hours into grinding in all my Zenonias to get back to where I was hehe..
Click to expand...
Click to collapse
Add me on gtalk and we can see what we can do [email protected]
At this point I don't know if anything will help heh.
All it will do is either sit on the GS2 boot screen, or it will go into Download mode.
Download mode though, no luck so far. Odin just won't flash it for some reason. It sees it, the COM port box lights up yellow, but the minute you hit Start, it just goes right to that error message I posted above. After this, I have to close both Odin and disconnect the phone and reboot it into Download mode.
I went through the Download Repo. Tried I777UCKH7-CL503881-Full.7z, and even the param.ifs by itself but everything just gives the same result. I didn't try Entropys DD though since I was running the stock ICS and didn't want to really mess anything up. Only thing I can think of left to try is flashing Task/Fennys CWM modded stock ICS kernel but after all this I doubt its going to work. I tried the stock rooted GB kernel earlier and it didn't bother flashing either.
Am I maybe connecting it wrong? I have the battery pulled and am going into Download mode by holding the vol buttons and connecting the usb cable to the laptop. I don't want to kill the battery power I have left as it won't charge now either. Basically I just fire up Odin, connect the phone and put it in Download mode, select my tar file and put it in the PDA slot, hit Start and go.. Should I be doing anything differently??
Whenever I've had a problem with Odin like that, it has always been that some partition got flashed wrong/partially/corrupted, and the only fix was to reflash the damaged partition. As long as Odin is seeing the phone, then it must be either a software/firmware problem or a hardware problem. I'm still thinking it is firmware, but it seems to be outside my experience.
I havn't been playing with ICS yet, but I have noticed that there have been a number of reports similar to yours, where people have flashed some flavor of ICS. This supports the idea that it is firmware. I have always understood that if the problem is firmware, and if the phone can boot into download mode, it can be recovered.
Yeah Im wondering if I should try flashing the PIT file I have for the phone, but I don't know crap about partitioning these things and didn't want to really mess it up.
Guess at this point its worth a shot. I was about to go sit and chat with the warranty folks at ATT (mines a refurb so Ive only got til the end of the month before warranty s up). Maybe Ill try the pit file and let Odin repartition the thing. I can't flash a firmware back onto it anyways.
EDIT: Holy crap progress.. I flashed the stock secondary boot loader with Odin (in the Bootloader slot) and that actually flashed. Now I just reconnected it and decided to try the ATT ICS leak one click from Rootzwiki and it appears my phone is now flashing!!!!! As long as my crap is still on the internal usb storage today is gonna be a good day hehe! Yep all is well so far! Phone just rebooted and its now at the ICS setup screen! WOOHOO!!! Crisis averted!! Thanks guys for the comments and help! Creepy thank you for reminding me we have that repository!!
Related
Hey so i have used odin lots of times before and pretty comfortable with the hole process. well computer had a heart attack and needed to be format and blah blah blah. back ups where made stuff like that.
I go to dl new tw rom and i always odin to stock before flashing a rom. so i put my pit file where it goes and i cant find my stupid tar file. i tried to download the t959uvjd.tar file but well the first time said it was going to take 6days and then after trying it a few more times im down to three hours (2.1 stock i know).
I then find after digging that eugene has a 2.2 stock deal. ok so i dl that (which also took forever (20 minutes)) and i tried to go to 2.2 stock. Using odin3 v1 that didnt work, it was hanging up on stupid boot.bin. So after some more digging i find that i need to get odin3 v1.7 and that fixes the hangups. Dl that. went real fast, lol. Open it up and i cant seem to get it to get past connection and it fails out. ive switched usb ports and what not but im wondering if anyone else has this problem or if i should wait the still 3 hours for that gd 959 tar file and go that route, or if there is another link that i can try or a better solution to my problem.
Thank you for reading thew this
EDIT: mods sorry i thought of one other option and it worked. Hate to ask this but would you mind deleting this thread i got it fingered out just fine. Used my 12 pit instead of the 13 pit file and worked first shot.
okay i'll preface this by saying i read all the way through the Vibrick thread and any others i could find on this subject.
i was running NeroV3, decided to try CM7. made a dumb move (apparently?) by restoring back to my stock 2.2 backup via CWM, then flashing to CM7 and THEN trying to flash the Overstock kernel (these steps should be reversed?). i wiped the cache and dalvik cache, but then the kernel flash failed ("installation aborted"), so i rebooted, which went fine. i used ROM Manager to get back to recovery, tried flashing the kernel again, failed again, hit reboot, and then my phone got stuck on the Vibrant screen.
I tried every 3-button combo (also with battery pulls) to get to Download mode but nothing works. when i plug in the USB the spinny-working-hourglass thing pops up but freezes, the green charging bar does not come up, and it does not go to download mode.
when not plugged in, it just keeps returning to the Vibrant screen. i can't even get it to turn off without pulling the battery. i'm definitely not comfortable trying the solder method.
any help is appreciated - i'm not giving it long til i take it to t-mobile and play dumb, worst comes to worst i'll just get a cheapo replacement from the store and find another vibrant (or similar) used on craigslist.
thanks!
UPDATE:::
got the phone into download mode thanks to a thread by Dolphinwigs. had to do have odin open when replacing the battery/holding volume up/down.
waiting on the stock rom download now (internet is slow). hopefully all goes well from here...
The biggest issue I find is that people give up on ODIN to easily. Getting into download mode is not that hard but also not that easy eiither. This is why everyone should purchase a jig, never give up on ODIN try it a thousand times and then once more. Always have ODIN up and ready with the proper files on hand, and as soon as it connects to ODIN be ready to make shyt happen.
In your case an ODIN flash should get you where you need to be and after you root again flashing to CM7 should not be an issue. Keep in mind if you use the .tar in ODIN as well as the .pit you will lose everything on both internal/exteral SD. At this point unless you made a backup prior to your issue its really a lost cost.
Good luck!
i am now back up and running, i just didn't realize i needed Odin running when i tried to go to download mode. so simple, but so frustrating.
one thing though, the ROM i got is Eclair. do i need to update to FroYo before flashing CM7?
and also, so i do it right this time, do i flash the Overstock kernel BEFORE i flash CM7? or does it matter?
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months. Everything was working the whole time. Today, I am browsing through my local news station's app and my phone freezes on me! I pulled the battery and restarted the phone. It boots up fine and gets to the startup screen with the time and the screen lock. I did notice right away that the digitizer screen was not responding to my touch because I could not slide my lock over to get into my phone. I tried a few more soft resets and still nothing. I did notice, however, that the soft keys at the bottom did respond to my touch and they blinked and provided haptic feedback, so at this point I'm thinking it shouldn't be a problem with my digitizer. So I took the battery out then put the phone into recovery and wiped data, cache and dalvik. Then I rebooted the phone once again and still no response to touch at the home/lock screen. I then proceeded to try to reflash the same ICS ROM all over again and that's where the problem started. I can get into download mode and I've already tried to load stock froyo and stock gingerbread, but nothing works. My phone will not go past the "Samsung" boot-up screen. I've already tried several other forums' threads on how to recover a bricked Fascinate, but no matter what I try to load with Odin, Heimdall or anything else, my phone won't load past the Samsung screen. I can get into Download mode and that's it. My phone will not go into recovery using the 3-finger method. When I run odin I get a success message each time. I've even tried to heimdall the files individually and even tried to reload the stock kernel. The other problem I am running into is a lot of the links on these sites are all broken so I am unable to get the files I need. Has anyone else ever had this problem?
Edit: P.S. When the phone is off and on the charger, the grey battery shows the "loading" circle (whatever you call it) in the middle of it, but never converts to showing the green bars moving up and down indicating the battery is being charged. The loading circle is also frozen and does not spin.
im dizzy after reading a few sentences lol...check out my guide in the general section.
droidstyle said:
im dizzy after reading a few sentences lol...check out my guide in the general section.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1238070?
If so, I just did it and it won't go past "Samsung."
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
jawman27 said:
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
I did check re-partition and yes I did load the atlas pit file. Still nothing.
e
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
mvmacd said:
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
Click to expand...
Click to collapse
I used heimdall front end to load DI01 files, I didn't use any commands. Also, I was just referring to "Unbrick your samsung fascinate" threads on other websites. A lot of the links I found were outdated or broken.
yea unfortunately not many guides have working links these days...Mine is about the only one left that is kept up to date. Im very suprised a full odin session did not fix your issues. One thing left to try is to odin a older stock package like DL09
Found here:
http://forum.xda-developers.com/showthread.php?t=1526488
Just tried pushing the DL09 file in odin AND in heimdall and neither worked. I still get stuck on the "Samsung" boot and it goes no further. Can't even get into recovery....
I think I truly have a brick...
kinna long shot
but why not try a different PC and a new or different cable.
believe me a faulty cable did me in, a week back and i was sure at the time that my phone is gone, but then it wasn't as bad as the impression i am getting from your description.
all the best with this , and hoping that something solves this issue.
god bless
haoleflip said:
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months.....
Click to expand...
Click to collapse
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
kduffman said:
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
Click to expand...
Click to collapse
I have a blue recovery [3.x, voodoo], here it is if the OP wishes to try it.
[Use Heimdall and select recovery]
cwm3_voodoo-blue.bin http://www.mediafire.com/?4ls06x8gha88vtp
cwm4-bml-i500-fascinate.bin http://www.mediafire.com/?2ny1ql66yh69bn3
35c31418dbe9a9db70de954cdf7369ef cwm3_voodoo-blue.bin
05f3e376ca697fd0fb8700dea05254aa cwm4-bml-i500-fascinate.bin
I threw in an extra 4.x cwm for good measure, lol. [I saved these in a folder in case I ever needed them..I was going to delete the folder since I upgraded to THS ICS rom (build 7.1), but I decided not to delete them for some reason]
it seems OP sounds like he knows what he is talking about, but lets start simple.
Have you tried going all the way back to 100% stock?
In droidstlyes FANTASTIC guide
do section 5, perhaps try with out repartition or the atlas....that has worked for me in the past.
I know on my THS ICS 7.1 build i had a "sleep of death" (wouldnt wake up) and i was lazy and did the 3 finger salute and it would ONLY boot into CWM. a battery pop would have been fine but like i said i was lazy. i had to Odin back to stock in order to re-flash everything. [luckily i had a nandroid from a few days earlier]
Good Luck
Edit: I have never seen or heard of a fassy that CAN get into Download mode and not be recovered to 100% functional.
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
OP, can you post the md5sums of the files, along with the filenames that you are using in Odin/Heimdall?
thanks
Well, I ended up getting a droid bionic from a friend, so I will turn this fassy into a project phone. If I can get it to work I will sell it or keep it for backup. Anyway...
I have not tried the older blue recovery yet. I will try that when I get back to my computer. It seems like I've gone beyond anything I've ever had to try with this phone. I read on one thread that if odin did not work, keep trying heimdall over and over until the phone boots up. I must have tried at least 8 times on one run. It still won't go past samsung screen. I can get into download just fine. No matter how many different cwms I try, I can't get into recovery using the three finger method. Im pretty knowledgeable when it comes to this stuff and I didn't flash the wrong rom or kernel or anything like that. I was running smoothly on an ics rom until my phone froze. I did have it overclocked with ns tools, but not at the time the phone froze. I honestly don't think its hardware related, but merely a glitch in the software or a bad kernel that does not want to come out? I have no clue....help me revive this baby lol...
Sent from my DROID BIONIC using Tapatalk
jawman27 said:
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
Click to expand...
Click to collapse
I've tried different pit files from different threads. Even the one from droidstyle's thread. I've also tried different versions of the following stock files from different "known" and trusted sites: DI01, DL09, ED01, EB01, EH03, CM7, CM9 other ICS roms and different kernels that suit each both voodoo and non voodoo. And excuse my newbness on the terms, but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
haoleflip said:
... but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Bootloaders can be flashed in Odin the same way a ROM can. A bootloader is the rudimentary software that gets the other software up and running. When Glitch's kernel started requiring Gingerbread bootloaders for complete functionality, a lot of us realized that just having GB didn't mean you had GB bootloaders.
http://www.mediafire.com/?fqojvsynkff93hc
Hopefully this link will work. It's certainly worth a try. It doesn't seem like you have much to lose. I'd recommend flashing it the exact same way you do a ROM. There's a bootloader section in Odin, but most people avoid it. Good luck.
Hi Guys,
I have been scouring the boards and the internet on a solution to this problem.
GF had the phone and put it to charge.
Picked it up sometime later and it was off.
Turned it back on and it was stuck in a bootloop.
Phone was using Stock Firmware and was unrooted. It was running Jelly Bean 4.1.2. The EXACT firmware eludes me.
Phone is able to go into Download mode and recovery mode.
I have included a picture of what recovery mode looks like. [pic]
I tried flashing via ODIN. I tried different firmwares. All of them stopped at Boot.bin
I tried Kernel flash via PDA and it stopped at "NAND Write Start!" and just stayed there.
I tried flashing a bootloader and the progress bar appeared (only time it ever appeared) but it stopped after a little budge and did not move again. Not even after 30 mins. [pic]
Is there anything else I can do? I followed all the tips from http://forum.xda-developers.com/showthread.php?t=1449771 and I'm still here. Any insight would be appreciated. Thank you.
Hopper8's "Odin troubleshooting' thread. Find it, try the stuff in it. All of it. Not just try a few things & then post here saying 'I tried everything' when you didn't. The only thing that will happen if you do that is you'll still have a busted phone. And you need to try the stuff in that thread repeatedly. Over and over. As many times as you need to.
That's the only way you're fixing it (the alternative involves paying a Samsung service centre a considerable amount of money to fix it). There are no easy/simple fixes in these situations.
Im pretty sure I was in exactly the same situation a while back.Youll need to look back at my posts as Ive forgotten exactly how I fixed it.
It did involve GB and pit files via odin as nothing would flash by recovery.
Im on 2.3.5 as that was about the only thing that would flash properly and make the phone boot.I initially thought I had a bootloader problem as ICS/JB wouldnt load.
I spent 5 hours on that,and cant recall if it was the pit or the special 2.3.5 rom/or both that fixed it.
theunderling said:
Im pretty sure I was in exactly the same situation a while back.Youll need to look back at my posts as Ive forgotten exactly how I fixed it.
It did involve GB and pit files via odin as nothing would flash by recovery.
Im on 2.3.5 as that was about the only thing that would flash properly and make the phone boot.I initially thought I had a bootloader problem as ICS/JB wouldnt load.
I spent 5 hours on that,and cant recall if it was the pit or the special 2.3.5 rom/or both that fixed it.
Click to expand...
Click to collapse
Thanks. I'll search your posts.
I think I posted a pic with similar errors to yours,so look and compare them.Theres not much info floating around about our/your problem.Pit files are only meant to be a last resort option,and I was in that category.
I also think that most/all things I flashed with odin passed,but phone would not boot,which led me to flash 2.3.5 combined with pit file.
I can't find your posts.....
Im only commenting because Im pretty sure its nothing to do with odin,I feel my phone and maybe yours has a hardware problem.I done a search before and only saw 1 situation like mines on another website.
For me,there was something major wrong for my phone not to accept ics/jb stock firmwares.
I have posted a pic before with the errors,and commented what I done to get the phone working.
I also dont think anyone on here can help,as it was the worst thing to fix Ive ever came across,and its not been mentioned on here.
Its up to you what you want to flash,but my moneys on a frankenstein GB rom c/w pit.Only try it at your own risk,or wait until someone else has alternative advice.
theunderling said:
Im only commenting because Im pretty sure its nothing to do with odin,I feel my phone and maybe yours has a hardware problem.I done a search before and only saw 1 situation like mines on another website.
For me,there was something major wrong for my phone not to accept ics/jb stock firmwares.
I have posted a pic before with the errors,and commented what I done to get the phone working.
I also dont think anyone on here can help,as it was the worst thing to fix Ive ever came across,and its not been mentioned on here.
Its up to you what you want to flash,but my moneys on a frankenstein GB rom c/w pit.Only try it at your own risk,or wait until someone else has alternative advice.
Click to expand...
Click to collapse
So I flashed the pit file.... and nothing happened. It just stopped there at "DO NOT TURN OFF TARGET!!!" I eventually closed ODIN but the phone still behaves the same way. If the EPROM is damaged, it won't have a partition to partition right? Any other suggestions?
I tried to flash CF root. Just to try anything. If hung up after kernel flash. Not it says I have a custom binary. Count 1. I don't know if that is relevant but... it shows something.
levi_jm said:
I tried to flash CF root. Just to try anything. If hung up after kernel flash. Not it says I have a custom binary. Count 1. I don't know if that is relevant but... it shows something.
Click to expand...
Click to collapse
Youll need to ignore half of my previous advice(about odin),and follow Mistahbungles advice.......as my memory is playing tricks on me.Also,it was the other way around in my case.....ICS/JB flashed ok,it was GB that wouldnt(but doesnt matter here).
You have a damaged partition table,so that hopefully will be fixed by flashing .pit using Odin.If you cant get Odin to work,you could try a friends pc,or see if a local shop has Odin working.
Apologies to you both for my memory.........lol
theunderling said:
Youll need to ignore half of my previous advice(about odin),and follow Mistahbungles advice.......as my memory is playing tricks on me.Also,it was the other way around in my case.....ICS/JB flashed ok,it was GB that wouldnt(but doesnt matter here).
You have a damaged partition table,so that hopefully will be fixed by flashing .pit using Odin.If you cant get Odin to work,you could try a friends pc,or see if a local shop has Odin working.
Apologies to you both for my memory.........lol
Click to expand...
Click to collapse
I did try his advice and with 6 different versions of odins on two different laptops with 6 usb ports between them. I don't think ODIN is the problem. I think the problem is a corrupted NAND. It is so corrupt that it did not accept a .PIT flash. It didn't hard brick the phone. It did nothing to it. I am unsure what else to do.
Well maybe I was right all along about odin,but that doesnt help anything.
I cant remember if I could do anything via recovery,but I do remember that several things I tried just kept giving that page of errors.
Youll just need to google each error and see what it throws up.Stuff thats said ranges from removing sd card to replace recovery(but by odin which you cant do).
I hope someone has some advice for me. I've been racking my brain for three days trying to figure out this problem.
Bought a g900t from ebay that only bootlooped to samsung screen. DL mode and recovery both booted fine.
Tried just wiping everything in recovery - nothing but bootloop.
Tried getting custom recovery on via heimdall - no dice. PIT failed to download. (This issue is not related to Kies - different machines to avoid interference.)
Tried KIES 'Firmware Upgrade and Initialization'. KIES said it was successful. Bootloop.
Odin-ed both ANCH and CNK2 firmware. Both were successful according to Odin. After each flash, the phone restarted in recovery and went directly to the android image with the blue sphere and a loading bar underneath. Started to load something, then rebooted directly back to recovery with android, and over and over and over.... (20-30 times before I pulled battery).
The phone now will not boot to recovery (only to above mentioned recovery loop). DL mode still comes up.
Tried Kies again, and it pretends like it is going to install but once I press start nothing happens.
I can't find a ROM with clearly labeled extractable partitions, and I can't find the proper partition name list, so I am not going to start trying to force-flash the partitions through heimdall (don't want to get the aboot and boot mixed up, e.g.) if I can even get heimdall to work.
You need to use Odin to go back to stock. I have no clue what firmware the phone is currently on but it's most likely lollipop. Here is a link for the 5.0 download http://forum.xda-developers.com/showthread.php?t=3034334
I use Odin 3.07 and have not had issues for years. Download the stock rom from the link mentioned and extract it somewhere easy to find. Once you extract it you will end up with a .tar file. Open Odin
Put phone in download mode and plug it in.
Make sure the COM tab lights up.
Click on pda and find the .tar file you extracted. Once found click open or double click it.
Odin will freeze while it loads the .tar file so be patient and don't freak out.
Wait til you see the file location load in the pda tab.
Once file loads up click start and profit.
Good luck!
Sent from my SM-G900T using XDA Free mobile app
Hi,
Thanks for the reply. As I mentioned above in the fifth paragraph, I tried two different firmwares through Odin.
I took the phone to BestBuy the other day and one of the Samsung Experience Center staff spent well over an hour reflashing the stock firmware using their setup and the phone still won't get past either a standard bootloop (first screen) or a recovery bootloop. He suggested sending it in under warranty (Knox still reads 0x0) and so it went out in the mail yesterday. Hopefully I get a functioning phone back.
On the bright side, the S.E.C. inside BestBuy seems to be a viable option for those who have a brick and don't have access to Odin/Heimdall.