I was running Batista's Foxhound 2.1 ROM with KH3 baseband. Then I flashed to Foxhound 2.3 which comes with KI8 baseband.
After that I realised my wifi is able to connect, but there is no internet connection to my device. I checked the settings and the baseband version stated is KI1 instead of KI8, what is going on here?
Could the baseband be the problem causing my wifi not to work? Normal telephony works and my IMEI number is intact.
Will flashing another ROM fix the baseband or must I restore to factory default first?
Thank you for your help!
Baseband is only for calls/mobile data. And it has nothing to do with your rom, you can flash every (SGSII) baseband you want.
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
ProNewb said:
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
Click to expand...
Click to collapse
Check your APNs to see if they changed or got wiped out?
ctomgee said:
Check your APNs to see if they changed or got wiped out?
Click to expand...
Click to collapse
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2. I live in Rep. of Ireland.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
ProNewb said:
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Click to expand...
Click to collapse
sxi200 said:
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Click to expand...
Click to collapse
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
ctomgee said:
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
Click to expand...
Click to collapse
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
ProNewb said:
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
Click to expand...
Click to collapse
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
sxi200 said:
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, i did go back and flash the jpkj2 2.3.5. and still no connection.
will try from an open place again later.
i have an issue with my internet connection too. i got an I9100(international version) and things were perfect till i switched to 4.0.3 and since then, my internet just refuses to connect although i have full signal strength and 3G or H displayed. but there is nothing going through.
it works again after i switch to airplane mode and back. i have no issues with wifi.
i have tried many modems and roms. i am currently using the KI4 rom and it still gives me issues.
please help.
update on situation
Hi guys,
just an update on my situation. Had the phone sent to Samsung twice for a check and bothe times it came back perfect with test sheets showing all was perfect. I decided to have another check done on the phone and it now says that the phone is blocked!! What the hell!. When i checked first weeks ago all was good and now it says it's blocked, but i'm getting 2g signal, surely i should be getting nothing if it's barred.
I have no idea who the origional service provider was of the phone, is there any way of finding out who the origional provider was or is there any way of removing this barring?
Thanks
Im on t-mobile and wanted to know does 3g work with the new baseband ? ive been searching and getting mixed accounts.
my phone sais my baseband is: v07u-000-000-MAR-23-2009
What baseband should i install ? would this method work well http://forum.xda-developers.com/showthread.php?t=1149530 ?
Can someone point me to a rom that works with newbaseband and 3g
thank you in advance
Recently i purchased a GT-S5360L after downloading two apps my phone told me my memory was low, i then attempted to use app2sd and rooted my phone i also tried creeds rom which was good except my headphone jacks didnt work, after trying to flash to hyperion7 my phone decided not to boot and i was bricked i decided to flash to a different rom from brazil using odin which brought my phone back however i as unable to get back my hsdpa i have read xda forums and i have tried just about everything but i cannot get back the initial rom, i recently went back to my mobile provider's store and found this information :model : gt-s5360L android version: 2.3.6 baseband version S5360LUHKK2 Kernel version: 2.6.35.7 [email protected] #39 Build number GINGERBREAD.WBK i tried to search the net but to know avail kies wont update my phone beacause of the odin rom i am running and though i have downloaded files from sammobile that might help they are huge and not odin friendly i was wondering if there is a way to get my original rom back, from samsung or otherwise i ram an app created byy docky which said my burn in model os is s5360maljdi is there anyone who knows a method other than slitfuz which might help me to revert back to my previous rom, i dont have any nandroid backup and i also know itts my fault and i am a stupid noob, please help me my company uses 850 as their 4G/3G/HSDPA band if that helps
Currently info after flashing:
Model number: GT-s5360B
android Version:2.3.6
baseband: s5360butg1
build nuumber: GINGERBREAD.UTLG1
Kernel versio 2.6.35.7
Noob here, I've been looking for answers and can't find any for this particular question. Here are my specs:
i9300 from UK O2 Unlocked
4.4.4CM 2014-10-12 Nightly
Kernal 3.0.64-cm-g4ca83ff
bootloader and baseband i9300XXELLA
Current RIL i9300XXLE8
CSC Code is O2I
Product code is GT-i9300MBDO2I
My issue is that my radio isn't wokring with any ROM i've been flashing. I've downloaded GetRIL and it's telling me that the RIL and baseband don't match. I tell the app to install the matching RIL and install. Nothing happens. Looking further into it I see that the baseband is from earlier stock release.
What baseband and radio should I use for 4.4.4? Or what do I need to install to get the radio working again so I can use my Three sim card? Thanks in advanced for your help.
Anyone??
Sent from my ASUS Transformer Pad TF700T using XDA Free mobile app
You are missing large chunks of basic knowledge. Go read the sticky on how to return to latest stock firmware, then test connection.
boomboomer said:
You are missing large chunks of basic knowledge. Go read the sticky on how to return to latest stock firmware, then test connection.
Click to expand...
Click to collapse
Damn, dude, I'm trying here! Don't have to put me down for trying to learn.