So i just changed my screen (LCD + digitizer) and for some reason it's really off.. When texting or typing anything it wont respond to some letter.. When i unlock it's not smooth and sometimes take me several tries to unlock.. It's almost feels like there's a whole row on the screen that isn't responsive.. I can't delete any letters either as the backspace doesn't seem to register. What could be wrong? Any solutions, please and thank you!
Also i used a little electrical tape to cover some light that was bleeding through, you think this can cause issues? Other than that i cannot think of anything that will cause this to happen. I need to fixed asap and really don't want to take it apart again and put back the old screen.
To be more specific when i try to unlock and slide it to unlock it will only go halfway and it'll bounce back and won't allow me to unlock, i do this a few times until it unlocks.. It's really annoying.
Related
Ok... I apolagize in advance if this has been muted before, but I really dont know what to search for.
My problem is, that when i make a call the screen turns off, ( As it should ) but when Im asked to tap in an extention number or 'press 1' etc I cant turn the screen back on, all the soft keys light up but the screen refuses to come back on untill I end the call.
If I dial in the number and the screen goes blank on connection, some times im able to turn on the screen if I move quickly enough and press the sta key.
Im running a htc hd2 with an the latest energy rom.
ditto
have the same problem, would love to find a solution...
Same problem here so I D/Ld Phonex from Iconsoft. Really like this a lot better and is so much more user friendly.
I'm not sure if you're having the same problem I was, but it sounds very similar...
What I discovered is that at the upper left of my screen protector, there are two round cutouts for the proximity sensor. The screen protector has never adhered very well at this point, and it was pulled away from the glass, causing the phone to belive that it was constantly near a face, and blacking out the screen.
I discovered this after being so frustrated that I removed the screen protector, and *voila!* the telephone worked as advertised. I used a hair dryer to warm the screen protector to re-adhere it, and the phone still works properly, but I don't know for how long.
I understand that there is a registry setting to disable the proximity function for the phone, but I haven't gone to this length.
I hope this helped!
I had the same problem till i change te Radio version to 2.10 or above then it disappeared
I have the same problem, screen protector causes this problem for me....
so, i just got this phone about a week ago, and its already seen several near death experiences with all the flashing ive been doing. but this one takes the cake. all i did was put the phone in my back pocket, with the screen facing in, sat down for half a second, and when i took it out, the screen had been pressed so hard that the top layer of the resistive screen was stuck to the bottm, and not registering anything. i knew the first step to fixing it was getting it unstuck. but it still wounldnt work. did a hard reset. and now im stuck at my initial tap screen to set up phone screen, and i cant do anything. this is clearly a hardware problem. can anyone help me out?
lemme be the first to say it man, ouch lol
sorry about your screen, i fear the only way to fix would be to find another screen assembly, if you search the threads for the cdma raphael(herman) i beleive there is a detailed teardown of the phone that may or may not help you resolve your problem. here is a quick link to something along the lines of what your looking for but not really too detailed : http://www.ifixit.com/Teardown/HTC-Touch-Pro/787/1
ive done that, but usually break the screen completely. i have an extra us cellular tp that has a bad keyboard and front panel buttons but screen and touch works. i just use it as a extra battery charger. has some scratches, but works. ill send it to you if you send me your old one. the screen has a double-stick tape that holds it to the frame around the edges. let me know if your able to tear it down and think you can put it back together again. its a pretty straight forward process though.
Apply packing tape to the screen and pull as hard as you can.
Hi all!
My friend loved my mozart, so decided to get himself one!
BUT, annoyingly, there seems to be a problem with the screen...
Sometimes it just wont detect that you are touching it etc.
Sometimes it will work for a little while, or even just a split second and think your pressing instead of sliding your finger.
i HAVE already replaced the screen thinking this would solve it, but its EXACTLY the same
Is there anything else i could try, or is it just a screwed unit?
Cheers
Keith
BUMPZ!!!
anyone???
you got a screen protector on it? before i got my screen protector on it, it worked good. but after then it sometimes didnt respond to touches. sometimes especially when it was hot
ive answered this 2 times alread, try to search
flash the previous firmware back and itll work, its worked for mine
having a problem with my touch screen. i've factory reset, wiped, and have even flashed a few different roms, i'm convinced the problem is with my phone and i'm hoping it's not broken. i turned on the touch indicator option and can see that sometimes when i wake my phone there is already input on the very center of my screen, almost where the Sense unlock ring would be. if i'm touching the edge of my screen and wake it happens a lot more often, and i was just playing with it and i'm able to make this occur by touching where the screen meets the bezel. anyone have any suggestions? it's really annoying, it'll open apps, unlock my phone, hang up calls, ect. thanks for any time in reading this and any suggestions you may have!
chrisosaur said:
having a problem with my touch screen. i've factory reset, wiped, and have even flashed a few different roms, i'm convinced the problem is with my phone and i'm hoping it's not broken. i turned on the touch indicator option and can see that sometimes when i wake my phone there is already input on the very center of my screen, almost where the Sense unlock ring would be. if i'm touching the edge of my screen and wake it happens a lot more often, and i was just playing with it and i'm able to make this occur by touching where the screen meets the bezel. anyone have any suggestions? it's really annoying, it'll open apps, unlock my phone, hang up calls, ect. thanks for any time in reading this and any suggestions you may have!
Click to expand...
Click to collapse
I had the same issue with my Samsung Gal ( the org) and ended up having to get it replaced at Verizon. But again i also had the issue on my DINC and that was just some dirt after taking it apart and cleaning everything was good to go...other then that it very well could be the screen
So, this thing drives me crazy...I've tried everything I knew and still nothing solved this problem.
I'm using HTC One. About 10 days ago weird things with touch started to happen. It seems that touch is partly unavailable/unresponsible on touch in one or two small areas. It seems to me like theres an empty place on my touch. Visualy is everything fine. Screen is crystal clear and has no damages or scratches. But I can't slide icons without troubles. Somwhere on 1/4 of screen, touch brakes briefly and I need another try to slide the icon. The same thing happens with status bar on the top of screen - I can slide it until that 1/4 part and it stops there and goes back. If I slide it quick with short move, it works fine, just slide alone over problematic area.
Also, few times I had that problem where screen works things on itself will. Makes pictures, or adds filters on Instagram, or, I don't know, just jumps around for few secons. Then, I lock the screen, then unlock it and usually that calm down the screen.
Also weird thing is that, when I want to send message, I can't reach "send" button in first try. I have to drop down writing sheet, than to touch the letters to put it in writing mode again, and then I can click the "send" button. On the same place where it was previously!
At first, I thought that plastic case or PVC protection is the problem, so I took off the protector from the screen. That solved problem for a bit. Then, I put back screen guard, and problem came back. After I totally rejected screen guard, problem is still here. I've tried to reset phone on factory, but that wasn't helpfull...
I forgot to state that I'm using Android 4.2.2 and this started to happen after that version update. I had no problem before.
So, now I'm here, as I don't know what else to do before I take this beauty to service. I just hope that this happens because of software bugs :crying:
Is there anyone who could help me? Have similar problem or know how to fix this?
In the meantime, I'll just hope that 4.3 will fix it themself... :fingers-crossed: