Hello!!
My SGS2, running ICS Litening Rom 2.5, loses wifi right after i plug my mhl cable. The wifi icon continues there but all navigation stops. If i unplug the cable, the wifi comes back....
Anyone with the same issue?
Thanks![/B]
sdfguerreiro said:
Anyone with the same issue?
Click to expand...
Click to collapse
Yes.
https://www.google.com/search?q=site:forum.xda-developers.com+i9100+wifi+mhl
oinkylicious said:
Yes.
https://www.google.com/search?q=site:forum.xda-developers.com+i9100+wifi+mhl
Click to expand...
Click to collapse
Did that before posting...but thanks for your response! Very helpful....
If you did that before posting, then why did you start a new thread, instead of posting in one of the threads you found?
Related
hey i just bought a hmdi cable and its not working...im on the ported JPM froyo rom, does that have anything to do with it?
and do i have to do anything else to get it to work?
Julianmgn said:
hey i just bought a hmdi cable and its not working...im on the ported JPM froyo rom, does that have anything to do with it?
and do i have to do anything else to get it to work?
Click to expand...
Click to collapse
If i remember this correctly, i remember hearing about the HDMI out cable not working on our phone do the the mini usb slot not having the correct pin setup.
xplanowestx said:
If i remember this correctly, i remember hearing about the HDMI out cable not working on our phone do the the mini usb slot not having the correct pin setup.
Click to expand...
Click to collapse
Samsung confirmed a while back that stating that the Vibrant had HDMI out was a mistake, the Vibrant does not support HDMI out at all ...
Julianmgn said:
hey i just bought a hmdi cable and its not working...im on the ported JPM froyo rom, does that have anything to do with it?
and do i have to do anything else to get it to work?
Click to expand...
Click to collapse
That might be why since the froyo rom is from i9000. I would try again with the stock rom and see if that still give you the same problem.
hi,
what kind of communication exists between tablet and dock when they are separate?
is it a kind of wifi one or bluetooth?
my goal is to use the dock on a table with usb device pluged in and use the tablet (with appropriate software) to control the usb device.
do you think it's possible?
best regards,
nicolas
sl1200mk2 said:
hi,
what kind of communication exists between tablet and dock when they are separate?
is it a kind of wifi one or bluetooth?
my goal is to use the dock on a table with usb device pluged in and use the tablet (with appropriate software) to control the usb device.
do you think it's possible?
best regards,
nicolas
Click to expand...
Click to collapse
No. The dock is "wired", and has no wireless capability.
Regards,
Dave
Dave,
thank you for your answers even if it's not the one i would like to read...
Regards
sl1200mk2 said:
hi,
what kind of communication exists between tablet and dock when they are separate?
is it a kind of wifi one or bluetooth?
my goal is to use the dock on a table with usb device pluged in and use the tablet (with appropriate software) to control the usb device.
do you think it's possible?
best regards,
nicolas
Click to expand...
Click to collapse
first off, this belongs in the Q/A section.
Second off, you weren't quite specific with your question, which is why you got a terrible answer that didn't answer your question lol.
If you're thinking like a usb mouse or usb hard drive, then yes. Game controller will also work. Not sure what else youw ould want, but as long as your tablet is docked, you can use the USB port on the dock.
first off, this belongs in the Q/A section.
Click to expand...
Click to collapse
you're right, sorry about that
as long as your tablet is docked, you can use the USB port on the dock.
Click to expand...
Click to collapse
this is exactly what i've understood, and exactly what is a shame for my purpose.
i'm a light designer for theater and my goal was to use my usb widget (to output lighting protocol) plugged on the dock and move in the theater with the tablet.
for what i understand, it's not possible with the prime...
Regards,
Nicolas
I wonder if remote keyboard function could be enabled, its got a battery and its own firmware, i wonder if a dev can hack functionality for it into the docks firmware in the future.
... For now, you would need a netbook/laptop/pc with the USB device plugged in, then use VNC or splashtop from tablet to chosen device.
I wonder if remote keyboard function could be enabled, its got a battery and its own firmware, i wonder if a dev can hack functionality for it into the docks firmware in the future.
Click to expand...
Click to collapse
Where to ask?
but it would be definitely a great option!
Danny-B- said:
I wonder if remote keyboard function could be enabled, its got a battery and its own firmware, i wonder if a dev can hack functionality for it into the docks firmware in the future.
... For now, you would need a netbook/laptop/pc with the USB device plugged in, then use VNC or splashtop from tablet to chosen device.
Click to expand...
Click to collapse
sl1200mk2 said:
Where to ask?
but it would be definitely a great option!
Click to expand...
Click to collapse
Yea but it doesn't have any radios to communicate with the Prime
You could create some kind of "remote" with a long self-made cable between the Prime and the dock
sl1200mk2 said:
Where to ask?
but it would be definitely a great option!
Click to expand...
Click to collapse
It probs wont be an option untill the bootloader is unlocked (soon were informed ??).
I'm not even sure itll be possible but i'd be happy to see the option there.
Any devs out there willing to offer any thoughts on if its possible?
How does the dock firmware work? is it possible for the dock to detect and run USB devices remotely?
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
Diamondback said:
Yea but it doesn't have any radios to communicate with the Prime
You could create some kind of "remote" with a long self-made cable between the Prime and the dock
Click to expand...
Click to collapse
Couldnt you just plug in a WiFi/bluetooth adapter ?
Couldnt you just plug in a WiFi/bluetooth adapter ?
Click to expand...
Click to collapse
this adapter would use the only usb port available...
sl1200mk2 said:
this adapter would use the only usb port available...
Click to expand...
Click to collapse
Just use a USB hub then youll have more than enough USB ports
Just use a USB hub then youll have more than enough USB ports
Click to expand...
Click to collapse
right.
and if dev's are aware about hacking dock's firmware, i'll be better to allow network communication than bluetooth (at least in my case)
++
nhshah7 said:
Second off, you weren't quite specific with your question, which is why you got a terrible answer that didn't answer your question lol.
Click to expand...
Click to collapse
Terrible answer? At least i answered the question he asked! Unlike you, below.
If you're thinking like a usb mouse or usb hard drive, then yes. Game controller will also work. Not sure what else youw ould want, but as long as your tablet is docked, you can use the USB port on the dock.
Click to expand...
Click to collapse
The OP asked how it would work when the tablet and dock were seperated! So how does this help?
foxmeister said:
Terrible answer? At least i answered the question he asked! Unlike you, below.
The OP asked how it would work when the tablet and dock were seperated! So how does this help?
Click to expand...
Click to collapse
Hahahah oops I didn't mean to offend you! I just meant a vague answer to a vague question in the OP. Sorry bud!!
Sent from my Inspire 4G using xda premium
sl1200mk2 said:
i'm a light designer for theater and my goal was to use my usb widget (to output lighting protocol) plugged on the dock and move in the theater with the tablet.
Click to expand...
Click to collapse
It's a bit cumbersome but what you could do is leave your usb widget plugged into a laptop/pc on the desk, and then use Splashtop to remote control that from the tablet. Of course this would require there to be a wifi network available.....
Sent from my Dell Streak using xda premium
It's a bit cumbersome but what you could do is leave your usb widget plugged into a laptop/pc on the desk, and then use Splashtop to remote control that from the tablet. Of course this would require there to be a wifi network available.....
Click to expand...
Click to collapse
that's also a solution of course but i need to bring either the laptop and the tablet on tour.
for now, i've made an app on the sgs2 to remotly send data to the laptop, and that's the lighter solution.
++
Of course, you could always trade in your Prime for an original Transformer TF101 which has a usb port on the tablet. But then again, does your dongle work with Android?
Sent from my Dell Streak using xda premium
green750one said:
Of course, you could always trade in your Prime for an original Transformer TF101 which has a usb port on the tablet. But then again, does your dongle work with Android?
Sent from my Dell Streak using xda premium
Click to expand...
Click to collapse
The TF101 didn't have a USB port on the tablet itself.
Regards,
Dave
Sent from my GT-N7000 using Tapatalk
When I connect my charger, it turns on and off constantly and the touchscreen brcomes disabled as soon as I connect it. I cant seem to find out what the problem is?
muddi900 said:
When I connect my charger, it turns on and off constantly and the touchscreen brcomes disabled as soon as I connect it. I cant seem to find out what the problem is?
Click to expand...
Click to collapse
What rom are you using? Are you rpoted on STOCK?
DefQoN_BE said:
What rom are you using? Are you rpoted on STOCK?
Click to expand...
Click to collapse
It was on stock ICS, Switched to toldo's rom, the problem persists.
muddi900 said:
It was on stock ICS, Switched to toldo's rom, the problem persists.
Click to expand...
Click to collapse
Have you tried a different cable? It sounds like something might be shorting in the connector.
These cables are available fairly cheaply on Amazon, among other places.
I'm having Bluetooth connectivity issues, specifically with my car (Volvo XC60, Bluetooth 04.23_R). For the last 2 or 3 weeks I've been using MegaFireMj2V6. Bluetooth was fine with other devices but the car wouldn't connect, always bringing up the "Unfortunately Bluetooth Share has stopped" error. Yesterday I upgraded to MegaFireMj2V7X, and now I'm having issues with connecting other devices as well, in other words the problem is now even worse.
I'm new to ROMs and flashing. Is it possible to replace and audition alternative Bluetooth elements in the hope of fixing the problem? Failing that I'll have no choice but to try another ROM entirely. That would be a shame because I'm enjoying MegaFire. But Bluetooth connection between my phone and car is essential. I'm not a power user, I just need a simple ROM, preferably no bloatware but definitely good, reliable bluetooth. Any recomendations, please?
You can replace your Bluetooth now..
Frezi Evan said:
You can replace your Bluetooth now..
Click to expand...
Click to collapse
Could you be more specific?
I've researched and have found that the Bluetooth stack, "Bluetooth Share", can be replaced. I've tried out three backups of my own, created by Titanium Backup in recent weeks, but unfortunately, this hasn't solved my Bluetooth issue. I have Bluetooth Share v 4.2.2. Is that the only version available, or can anyone let me know where I can find and audition alternatives? Failing that, I'll be re-flashing MegaFireMj2V7X later today and keeping my fingers crossed that that does the trick (although I don't think it will!).
trurl3 said:
Could you be more specific?
Click to expand...
Click to collapse
Yes. I can..
Thanks, Turl3. Reinstalling MegaFireMj2V7X repaired Bluetooth, but I'm left with the issue that I can't run two devices at once. I want to connect to both my Sony Smartwatch2 and my car at the same time. I've posted in the Q&A forum to see if anyone can help.
Frezi Evan said:
Yes. I can..
Click to expand...
Click to collapse
So? Lets go with it...
AidanBell said:
Thanks, Turl3. Reinstalling MegaFireMj2V7X repaired Bluetooth, but I'm left with the issue that I can't run two devices at once. I want to connect to both my Sony Smartwatch2 and my car at the same time. I've posted in the Q&A forum to see if anyone can help.
Click to expand...
Click to collapse
Hmm.. at least you can connect to one device.... it's kind of progress.. . Sorry, I can'ot advice nothing more...
trurl3 said:
So? Lets go with it...
.
Click to expand...
Click to collapse
OKay. thanks
trurl3 said:
Hmm.. at least you can connect to one device.... it's kind of progress.. . Sorry, I can'ot advice nothing more...
Click to expand...
Click to collapse
Thanks.
Bluetooth is weird! It wouldn't connect ... it wouldn't connect ... But then today, without my doing anything at all, I got into the car and all of a sudden both devices are connecting perfectly!! And it's been like that all afternoon. I'm not going to touch any settings on any device, and hopefully things will stay as they are
AidanBell said:
Thanks.
Bluetooth is weird! It wouldn't connect ... it wouldn't connect ... But then today, without my doing anything at all, I got into the car and all of a sudden both devices are connecting perfectly!! And it's been like that all afternoon. I'm not going to touch any settings on any device, and hopefully things will stay as they are
Click to expand...
Click to collapse
Thanks GOD...
I will hope it will stay many days..
I think it was some technical problem..
Frezi Evan said:
Thanks GOD...
I will hope it will stay many days..
I think it was some technical problem..
Click to expand...
Click to collapse
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
AidanBell said:
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
Click to expand...
Click to collapse
:good:
AidanBell said:
Thank you. I hope so too.
And yes, unless it was magic, it was a technical problem
Click to expand...
Click to collapse
ok Thanks..
hi everyone. I recently bought this device, but I have a problem with the usb-c to 3.5 jack cable. Is it normal that nothing is heard when I connect my headphones? The cable is included with the device.
You re on stock ROM??
rayman95 said:
You re on stock ROM??
Click to expand...
Click to collapse
yes, apparently it's MIUI 13.0.8.0 global
cryeva111 said:
yes, apparently it's MIUI 13.0.8.0 global
Click to expand...
Click to collapse
so its not normal..some custom roms had audio issues, but not stock.
maybe you can clean flash fastboot rom and see if still issue
I'll try that, ty
cryeva111 said:
I'll try that, ty
Click to expand...
Click to collapse
probably it's the convertor that you are using. If you can source another one and give it a shot.
cryeva111 said:
hi everyone. I recently bought this device, but I have a problem with the usb-c to 3.5 jack cable. Is it normal that nothing is heard when I connect my headphones? The cable is included with the device.
Click to expand...
Click to collapse
I haven't received a cable with my phone. I have buy it, and never had problem with it.