Please lock this thread - HTC EVO 3D

No longer supported.

---

This will come in handy, thanks!
Inviato dal mio PG86100 utilizzando Tapatalk

---

mmmm cool
Sent from my PG86100 using xda premium

---

Might I ask what page plus is.?
Sent from my PG86100 using XDA

---

ognimnella said:
Might I ask what page plus is.?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
its a phone service kind of like metro pcs

---

Nice! Thanks a ton
Sent from a dark hole in my backyard

---

super easy guide! Worked on Evo 4g.

---

Nice write up.. thx for sharing
godZson
XDA-MOD

---

You might want to say that you only need CDMAWS if you want to change your MSL, although since it is so easy to get the MSL with MSL Reader, you can probably skip that part. Great writeup though. Ive done a Moment and Vitality to PagePlus and the guide is the same, so this is an almost universal Guide.
On a side note: For the Moment and Vitality, MSL Reader does not work, I had to get the MSL by using getprop ril.MSL in Terminal.

---

evilvoice said:
You might want to say that you only need CDMAWS if you want to change your MSL, although since it is so easy to get the MSL with MSL Reader, you can probably skip that part. Great writeup though. Ive done a Moment and Vitality to PagePlus and the guide is the same, so this is an almost universal Guide.
On a side note: For the Moment and Vitality, MSL Reader does not work, I had to get the MSL by using getprop ril.MSL in Terminal.
Click to expand...
Click to collapse
Well I mentioned MSL Reader because its easier to use for new comers and it only works on the HTC phones which is what I'm flashing in this guide. If you use CMDAWS you just go to the security tab and under SPC click the drop down box and pick HTC Method. Then click read. Phone must be in DIAG mode though.
Any how I'll be making more guides. I can flash damn near any phone to any company except the Stratosphere.

---

Dial ##000000# and click edit mode.
Click MDN and enter your phone number, Press OK
Click on MSID/MIN and enter it if you know it, If not call your provider and ask them for it.
Press Menu and Commit Modifications (Phone may reboot)
Click to expand...
Click to collapse
This part where im lost at, where exactly do I do all of this at? I dont see none of this in CDMA Workshop. I have version 3.8.0
Edit: Also Can I choose a phone number for the part where i use QPST & need to input *phone [email protected]*? The phone i got from ebay was a bad esn and I'm guessing the phone thats already on the phone still works.

---

How are 3g speeds on page plus? Just curious I have mine on metro atm and have been thinking about going to boost or here if speeds are decent enough.
Sent from my PG86100 using XDA

---

KennyKusanagi said:
This part where im lost at, where exactly do I do all of this at? I dont see none of this in CDMA Workshop. I have version 3.8.0
Edit: Also Can I choose a phone number for the part where i use QPST & need to input *phone [email protected]*? The phone i got from ebay was a bad esn and I'm guessing the phone thats already on the phone still works.
Click to expand...
Click to collapse
In the very first tab with all the phone info. Should be right on top. It is probably labeled mdn and min. If that's what there labeled mdn will be your phone number and min will be msid or mobile identification number (sorry been a while since I used cdma workshop). Qpst doesn't have the option to change phone number itself. It will only allow you to change it for your data profiles. ##000000# or your six digit msl code will accomplish this step for you also.
Sent from my PG86100 using XDA

---

mteezey said:
In the very first tab with all the phone info. Should be right on top. It is probably labeled mdn and min. If that's what there labeled mdn will be your phone number and min will be msid or mobile identification number (sorry been a while since I used cdma workshop). Qpst doesn't have the option to change phone number itself. It will only allow you to change it for your data profiles. ##000000# or your six digit msl code will accomplish this step for you also.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Ok cool. another thingm I get an error during the last part where I write to the phone in QPST.
The error says NV_UE_IMEI_I (Status) NV_READONLY_S

---

Disregard that error it doesn't mean anything. You can actually check that box to not notify u of that again if it bothers you.
Let me know how this goes for you and do a speedtest for me if you can. My metro bill is due in a few days if speeds are good I will be making the switch.
Sent from my PG86100 using XDA

---

Thanks for helping mteezey. I have my notifications turned off for subscribed threads. +1
The 3G speeds are very good. Remember this one thing PP uses VZW towers. Actually when I flash the Thunderbolts they get 1x and the 1x is pretty damned fast.

---

Have you flashed any EVO3Ds to Verizon? Assuming the ESN is accepted by Verizon's network of course.
-C

---

I've heard that Verizon phones get way better speeds on pp than sprint phones. I'm sure its probably just due to lack of provisioning on the parts of places that flash them. I definatly am intersted in tinkering with this. If someone with a EVO 3d on page plus or any sprint phone could do a speed test that would be great. Being on verizon network it should be at least 1mbps and up depending on area. Only reason I ask is cause u can get around 1mbps on boost witout any limit on data. But I don't use much mobile data but When I do I wouldn't mind it being fast. I could probably get away with the 1gb cap.
Just really wanna know the speeds.
Sent from my PG86100 using XDA

---

mteezey said:
I've heard that Verizon phones get way better speeds on pp than sprint phones. I'm sure its probably just due to lack of provisioning on the parts of places that flash them. I definatly am intersted in tinkering with this. If someone with a EVO 3d on page plus or any sprint phone could do a speed test that would be great. Being on verizon network it should be at least 1mbps and up depending on area. Only reason I ask is cause u can get around 1mbps on boost witout any limit on data. But I don't use much mobile data but When I do I wouldn't mind it being fast. I could probably get away with the 1gb cap.
Just really wanna know the speeds.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Thats not entirely true. Almost all Sprint phone get 3G while most VZW phones only get 1x.
cmylxgo said:
Have you flashed any EVO3Ds to Verizon? Assuming the ESN is accepted by Verizon's network of course.
-C
Click to expand...
Click to collapse
Any phone can be flashed to PP and yes I have flashed the 3D numerous times to PP. I just got done doing one. When activating phones on PP always use the ESN(HEX) not the DEC because its too many characters. All Sprint phones that I have flashed always have a 14 character ESN(HEX) which is what you need for PP. If your ESN has 15 characters then drop off the last one digit. It will still activate without the last digit. Speaking of which the Thunderbolt is one that I know of that you have to drop the last digit on. Only one I can remember lol.

---

Hey! I saw this method and noticed it didn't involve device cloning and that it was for 3 phones.
I had to write about it.
http://www.xda-developers.com/android/flash-any-evo-device-to-page-plus-service/
Hope you like it very awesome work!