I need help resolving funky battery charge status with my Vibrant.
I flashed to ICS Euphoria RC2.1, everything is working well but noticed that when I plug the phone to charge the battery, I get wrong charging statuses. The LockScreen displays 'Charged' status. However, the StatusBar displays charge status at 95% and charging and the battery never charges past 95%. Is anyone having this issue also? Is there a fix for it?
It sounds like you might need to recalibrate your battery by wiping the battery stats using cwm or battery calibration from the market the second one requires that you be rooted here are the directions
1. Charge the device to full battery; let it keep charging until the battery says it is fully charged. Do not just wait until the light is green, it isn't always fully charged, causing a lot of inaccuracies. (You can check by going to: Settings » About device » Status » Battery Level = Full.) 2. Boot to recovery mode and delete the battery stats NOTE: To have the most accurate of battery stats, reboot the device immediately after wiping the battery stats and wait for CyanogenMod to boot completely to the desktop. Once your entire boot is done and you have full access to the device, go ahead and pull the charger and continue with this troubleshooter.
3. Do not charge the device until after draining the battery completely, resulting in it automatically shutting off. 4. Recharge the device completely and then use as you normally would.
Though the directions are for a different rom the steps should be the same
I'll try that, thanks.
Hahussle said:
It sounds like you might need to recalibrate your battery by wiping the battery stats using cwm or battery calibration from the market the second one requires that you be rooted here are the directions
1. Charge the device to full battery; let it keep charging until the battery says it is fully charged. Do not just wait until the light is green, it isn't always fully charged, causing a lot of inaccuracies. (You can check by going to: Settings » About device » Status » Battery Level = Full.) 2. Boot to recovery mode and delete the battery stats NOTE: To have the most accurate of battery stats, reboot the device immediately after wiping the battery stats and wait for CyanogenMod to boot completely to the desktop. Once your entire boot is done and you have full access to the device, go ahead and pull the charger and continue with this troubleshooter.
3. Do not charge the device until after draining the battery completely, resulting in it automatically shutting off. 4. Recharge the device completely and then use as you normally would.
Though the directions are for a different rom the steps should be the same
Click to expand...
Click to collapse
Related
Does this happen to anyone else? My average battery life is something like 18 hours; whenever I wipe battery stats I can run my phone (with the same kind of usage) for over 24 hours; after calibration is complete, battery life drops to 18 hours or so again.
Weird..
The first run when wiping battery stats is always longer than the 2nd. But give it another run, and it will even out, and the longer you go, the more even it gets.
Sent from my SGH-T959 using XDA App
This process below (from here http://forum.xda-developers.com/showpost.php?p=11285391&postcount=1 ) has turned my phone into a battery champ
HOW TO RECALIBRATE YOUR BATTERY (by heartagramm):
COMPLETE GUIDE!!!
You'll have to use the phone for about 1-4 days (although it varies depending on the phone and battery used; every phone is an individual). It runs out of battery. Yes. Let it run. Recharge. After 3-4 recharges the battery will "gain" it's performance back.
After 3-4 full charge/full drain -cycles, do the following:
1. Charge the battery up to fullest.
2. Keep it plugged in to charger, and reboot to recovery.
3. On the recovery, go advanced, wipe battery stats, scroll on to yes BUT Don't wipe them yet. When you're ready, quickly remove the battery cable and push to wipe the battery stats.
4. Reboot the phone, use normally. Let it run completely out of battery.
5. Charge the phone back to full. Turn off phone. Charge until it says 100% on the green bar and vibrates for full charge.
6. The Important Part. Remove the charge cable for 0-0.5 seconds and plug it back in instantly. Let it charge to 100% again. Do this 1-2 times again, so you've done this 2-3 times total.
7. Reboot to recovery, wipe the battery stats again as on the step 3.
8. After wiping the battery stats, plug the charger back in the phone.
9. Reboot to ROM. Keep the cable plugged in. Keep it plugged in for about 30 mins to 2 hrs. Unplug. Should say 100%, mine did for about 40 mins after it depleted onto 99%.
And this is the way you should really gain great battery performance.
I have found so many guides on how to calibrate battery best. This one: http://forum.xda-developers.com/showpost.php?p=15450518&postcount=3 Or this one: http://theultralinx.com/2011/07/calibrate-androids-battery.html
Or: just charge until full, wipe batterystats and just let it run out of power, then recharge to full again (that is the easiest one). So would the last one be enough, or do you have to do it the complicated way to get best results?
Also when draining the battery until the phone shuts down (after deleting stats), should it be used normal or can I just run some applications to use up battery fast?
what i used to do was:
charge to full once,
unplug, (and you will see sometimes it goes back to 99%),
plug again for a few minutes,
unplug,
go to recovery and wipe battery stat.
then reboot and use the phone NORMALLY until it shuts off (set the brightness to highest for next step).
BOOT straight into recovery and leave the phone until it dies again because there will still be some juice left.
while off, charge it,
when it gets to 100% while off, unplug,
then plug it again for a few minutes,
then boot up normally.
atlaswingpasaway said:
what i used to do was:
charge to full once,
unplug, (and you will see sometimes it goes back to 99%),
plug again for a few minutes,
unplug,
go to recovery and wipe battery stat.
then reboot and use the phone NORMALLY until it shuts off (set the brightness to highest for next step).
BOOT straight into recovery and leave the phone until it dies again because there will still be some juice left.
while off, charge it,
when it gets to 100% while off, unplug,
then plug it again for a few minutes,
then boot up normally.
Click to expand...
Click to collapse
Ive heard you should never "try" to over charging it by unplugging and plugging back in.
There are a lot of rumors and myths about battery calibration (and a lot of threads on this forum and copy-pastes on other blogs).
Personally I don't believe in long rituals with precise times and percents. Battery has build in controller, that can't be wiped. And Android has battery history file, that can be erased (butdoes it have any sense?).
Please, post link to authoritative source of information about battery calibration, if anyone has it.
Use the phone till its out, power it up via download mode to really drain every last drop. Charge it with the official charger while its off, once charging is full power on the phone let it boot properly and resume to charge maybe for 5mins then your done. Battery stats bin = totaly myth.
brianmay27 said:
Ive heard you should never "try" to over charging it by unplugging and plugging back in.
Click to expand...
Click to collapse
i hear you and i was reluctant to do that as well. but since new Li-Ion batteries have some sort of "overcharge protection" mechanism on them,
the batteries will stop taking in current automatically once they reach maximum mAh (not the battery stat maximum, the battery itself).
dangers related to charging are incompatible chargers, screwed up wall sockets, surges, etc. Know that companies nowadays keep saying "USE ONLY <company> COMPATIBLE CHARGERS"
because these chargers/cables also have this tech where current just stops once it's full.
well the "theory" was that since the battery stats is kernel related and gives battery "readings", when the number gets < 15, it will give out the warning to charge, then when the number gets to 0, it shuts off the system. This may happen but the battery MAY still have some power left in it, it's just the battery stats that says "hey, i see it zero, turn us off".
This scenario may happen to a screwed up battery stat reading, which is solved by wiping it's top charge number (1650) and the bottom charge number (0). the next boot will create a new
source file for the battery stat, containing no data then upon boot complete, the system will record the current battery level as top charge number to the battery stat. when it drains out, that
will be the new bottom charge number.
i do not have a wikipedia or engagdet source but Team Whiskey (a well known dev/mod team for Vibrant) of the Samsung Vibrant forum here in XDA explained it themselves.
Thanks for this thread. Really useful!
I use this one, nice & simple app,
https://market.android.com/details?id=com.nema.batterycalibration
I am using CM7.1 Weekly #4 and i am unable to charge it to full 100%. the best i can get is 95% and it says battery full on lock screen. i don't know how battery percentage works in CM7, battery life is awesome so can any one help me how to get back to 100% charging like stock rom.
If you just flashed the rom then it could take a couple charge cycles for it to work itself out. Another "trick" I've read about is to:
1. Turn off the phone and take the battery out
2. Plug it in while the battery is still out and still turned off
3. Wait for it to display the "battery logo", it should have a question mark in it
4. Put the battery back in, still leaving it turned off, and wait for it to recognize the battery
5. At this point it might only show like 5% or 10% charge, don't worry about that, just let it sit on the charger for about 30 minutes to an hour while leaving it still turned off
6. After waiting, turn it on while plugged in and wait for it to boot and then unplug
From my understanding, this is a method to "bump charge" it.
Also, try using search next time instead of starting a new thread.
http://forum.xda-developers.com/showthread.php?t=1198333
xateeq said:
I am using CM7.1 Weekly #4 and i am unable to charge it to full 100%. the best i can get is 95% and it says battery full on lock screen. i don't know how battery percentage works in CM7, battery life is awesome so can any one help me how to get back to 100% charging like stock rom.
Click to expand...
Click to collapse
yes i am aware of that method, i think this method is only if ur facing bad battery. i am having gr8 battery just wrong percentages that's all.
hi guys! i'm running cm7.2 on my su660 (it's a kang build which is ported from p990 official CM build). and i have a problem on charging the phone. when the phone have 10% of battery left, i plug in the charger, the phone show the charging symbol . but when i leave it sleep and come back after 'bout 3 hours, it still show 10%. but the voltage in sparepart is aproximate 4200 mV. so the battery is fully charged but the rom didn't regconize it. but then after some minutes turning the screen on, the rom show that phone is fully charged. so i guess that the battery percentage counter doesn't work why the phone is pluged in and sleep. so this is a rom issue? can i fix it myself?
PS: sorry for my poor English because i'm not a native English speaker. i'm from VietNam. i tried my best to explane my case. hope u can understand me!
If, after rooting or more likely that case after flashing a new rom, you often have battery reporting errors, and re-calibrating the battery along with some steps I will outline for you below will ensure that your battery is getting a full charge, and the battery reporting accuracy is right on. As far as power cycling, I don't know that it does much good. I run my device in performance mode all the time, and with a CPU overclock of 1.25GHz and various tweaks, I have about a day an a half to a day and a quarter of full runtime from my battery. This is with moderate to heavy usage (calls, emailing, text, gaming, web browsing, etc.) so you should have no problems getting acceptable battery performance after following these steps:
1. Take the case off your device (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your device to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. Write it down.
My Atrix 2 was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your device completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%.
10. Let it sit there charging for 2-3 hours (or more).
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours (or more), turn the phone on while holding the volume down button and get into CWM (if installed) or use Rom Manager (is device is supported).
Do not disconnect it from the charger still!
12. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
13. When the phone turns on, go into Battery Calibration app again and look up your MV numbers -if you were like me, they should be significantly higher than before. After this whole process I had 4351MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
14. Before going to sleep - Install Watchdog Task Manager Lite from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
15. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
16. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
Sent from my MB865 using xda's premium carrier pigeon service
i hv bnattery problem for 3-4 month
still cannot solve the battery problem
i think i have done some wrong steps in the battery calibration
when my battery is fully charged in a battery changer(charger for battery only)
when i put the battery into the phone, it's shows that there is about 30% of battery
when i further use the battery, the battery level rise (without charging!) to 100 then drop to 0 and turn off
the time that the phone can use from 100% to 0% is quite short
when every time after charging, the battery level is 100%
it won't charge to the "real" full battery level, ie ~30% (SORRY FOR MY POOR ENGLISH)
how should i calibrate?
i used the battery calibration app, but no use.
Charge to 100 then use battery calibrator from market very simple
Sent from my SCH-I500 using XDA
If your recovery is ClockWorkMod, then there is an option to "Clear Battery Stats". Just try to see whether it helps.
~Cheers
It's a few days late, but battery calibration is unnecessary on modern batteries (Lithium). All the apps do is delete a small file that records power usage, they do not affect battery life in any way. This file is cleared automatically (by the system) when the phone is fully charged.
Further, full charge/discharge cycles will actually have a net harmful effect on your battery life. A lithium ion battery has a limited number of charge/discharge cycles it can sustain before becoming more effective at being a paperweight than powering anything. The full cycles you are doing simply eat into the battery's overall life expectancy.
For instance, it is better to charge from 50% to 100% multiple times than it is to go from 0 to 100 once.
Personally, I would just replace the battery.
I would suggest u to calibrate the battery in the clockworkmod recovery too
if this wont has any effect take into consideration that your battery might be damaged
i faced this problem one year ago with a galaxy spica the battery was shown as full and after a restart it was almost empty and calibrating the battery did not had any effect
so have a try and report afterwards
If, after rooting or more likely that case after flashing a new rom, you often have battery reporting errors (as mentioned above), and re-calibrating the battery along with some steps I will outline for you below will ensure that your battery is getting a full charge, and the battery reporting accuracy is right on. I run my device in performance mode all the time, and with a CPU overclock of 1.25GHz and various tweaks, I have about a day an a half to a day and a quarter of full runtime from my battery. This is with moderate to heavy usage (calls, emailing, text, gaming, web browsing, etc.) so you should have no problems getting acceptable battery performance after following these steps:
1. Take the case off your device (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your device to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. Write it down.
My Atrix 2 was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your device completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%.
10. Let it sit there charging for 2-3 hours (or more).
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours (or more), turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
13. When the phone turns on, go into Battery Calibration app again and look up your MV numbers -if you were like me, they should be significantly higher than before. After this whole process I had 4351MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
14. Before going to sleep - Install Watchdog Task Manager Lite from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
15. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
16. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
Sent from my Atari Falcon030