I am not necessarily a noob at this because I did a lot of this stuff on my old HTC Aria. But I was trying to unlock my BL doing 2.3.4 steps on 2.3.6 and I managed to get this error:
Code:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Availible modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery (NO BP)
Vol up to select, vol down for next choice.
Now I think what happened was that I didn't have my phone USB plug plugged into the back port instead I had it in the front one and caused it to fail.
Does anyone know if it's possible to save my phone, and if so what I could do to unlock boot loader for 2.3.6 or 4.5.141.
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
i got the same problem u used the automatic unlock program.......my phone wont get detected my computer am using a laptop ////
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
AZNSNSAZN said:
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
Click to expand...
Click to collapse
Looks like a hard brick. What did your friend do exactly? What firmware version he had and if he had tried to flash a SBF, what is the version of the SBF?
Share some more details so that we can narrow down on the problem.
Related
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
OSNPA said:
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
Click to expand...
Click to collapse
I can get into RSD. But i updated through the OTA 2.3.4 zip. Im not to sure if its safe to flash older SBF files.
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
unknownerr said:
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Click to expand...
Click to collapse
Thanks.. Had really nothing to lose, so i took the gamble. Finished with the fastboot unlock by navigating through the options. Unlocked the BL.Then the phone rebooted back to gingerbread.
Xenocyde said:
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
No I updated through System recovery.
kenneth version worked for me!
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
I really throws the same error, what should I do? what is the easiest method
fix? thanks
Jnewell05 said:
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Just so we're all on the same page, it IS alright to flash fruit cakes. Just a side note...
in this thread talking about flash version 4.1.57 of Kenneth (correct?), someone could help me a bit because they do not find it.
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
And now the phone restarted and it got this message:
SVF:105:1:2
Failed to boot 0x1000
PwrReason: PWR_KEY_PRESS
Starting Fastboot protocol support
Chubby_Skunk said:
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
Click to expand...
Click to collapse
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
jruweaver said:
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
God im a dumba**.......
thanks a bunch
Chubby_Skunk said:
God im a dumba**.......
thanks a bunch
Click to expand...
Click to collapse
how were you in "Failed to boot 0x1000" and then had fastboot ????
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
I had this same issue however when i try to unlock it i hear the usb disconnect noise and then it says "FAILED (remote00180001)). I did the exact same things as op up to this point,
maybe this would be the place to look - DEBUG] Calling all (AT&T) 0x1000 'hard' bricks
http://forum.xda-developers.com/showpost.php?p=15573674&postcount=1
I believe this issue has been resolved.
hakemcpu said:
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
Click to expand...
Click to collapse
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
itsauniquesn said:
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
Click to expand...
Click to collapse
Do you have the menu screen?
Sent from my MB860 using XDA App
I was tried to unlock bootloader but after my phone showe there is no os detected i scared and luged my phone out then i got soft brick. I tried to recover it by this guide http://forum.xda-developers.com/showthread.php?t=991072 but after first step of rsd lite flashing i got hard brick/ RSD lite showed that it is turning my phone to BP by pass mode but then it showed error turning phone to BP by pass mode and stoped flashing after that my phone is hard brick. What can i do? please help
Can i send it to AT&T service to repair or change it i bought it from ebay two days ago.
Is your phone an international (non-US) model?
When your phone boots up, and you see the "Failed to boot" message at the top: Does it say "Entering NVFlash mode" quickly before shutting back down, or do you have a list of other options below?
brick?
RSD Lite seem connected? see if you still have a chance to heal: (
it is us model
It is not connect to rsd. When it turns on it shows nvflash mode. I asm searching a way to write a true script to install rom via nvflash by using nvidia apx drivers from lg tegra devices.
Could anyone help me with this. I am sure it is able to recover via nvflash and this wat is not published by motorola or nvidia. Because on another tegra device i use nvflash recover easily. It is verybig problem. Who will use motorola devices after that .....
So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Your are Soft Bricked * Dont worry
You are currently Soft Bricked, I'm presuming you were already on GB 2.3.4/4.5.91.
Try this first --> http://forum.xda-developers.com/showthread.php?t=1182871
once you have Unlocked boot loader go ahead and flash SBF, if you want or else try flashing any GB/CM07/CM10 of your choice from recovery
terris98 said:
So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Click to expand...
Click to collapse
Is the bootloader unlocked?. If it's it will say as unlocked when it displays 'Motorola Dual core' logo or with the series of message you mentioned in OP.
Very upset and would appreciate any help. Cant afford another phone now.
I have been a Atrix user for sometime now (MB860, ATT)
Was very happy with my phone, running on stock, no root, no unlocked bootloader.
My friend was playing with my phone and decided to download and install the OTA update to
2.3.6, 4.5.145
First run went fine. Today, I opened the back cover to clean some accumulated dust near the
mouthpiece. When I re started the phone, I got this
SVF:105:1:2
Failed to boot 0x1000
No OS detected going to RSD mode in 5 seconds
Press key to stop countdown
Available modes are
1. RSD
2. FastBoot
3. NV Flash
4. BP HW Bypass RSD
5. BP HW Bypass QC DLOAD
6. BP HW Diag & Boot AP
7. BP HW Bypass BP Only
8. BP SW Bypass RSD
9. Android Recovery
10. Boot Android (No BP)
11 Device UID
12. Console=ttys0 115200n8
13. Early USB enumeration
14. BP Tools
---------------------------------------------------------------------------------
Vol Up to select, Vol Down for next choice
Unable to understand what happened exactly....How do I get my phone back???
Would appreciate any help and advice. Not exactly a noob on software dev, though not
related to android.
Thanks in advance.
Thread Closed as a duplicate...