So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Your are Soft Bricked * Dont worry
You are currently Soft Bricked, I'm presuming you were already on GB 2.3.4/4.5.91.
Try this first --> http://forum.xda-developers.com/showthread.php?t=1182871
once you have Unlocked boot loader go ahead and flash SBF, if you want or else try flashing any GB/CM07/CM10 of your choice from recovery
terris98 said:
So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Click to expand...
Click to collapse
Is the bootloader unlocked?. If it's it will say as unlocked when it displays 'Motorola Dual core' logo or with the series of message you mentioned in OP.
Related
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Sthony said:
Tried Flashing the pudding unlock through rsd. Didnt go so well. I have the same failed to boot 0x1000 error along with:
no os detected going to rsd mode in 5 seconds press a key to stop count down:
1 Rsd
2 Flash boot
3 NvFlash
4 BP HW Bypass Rsd
5 BP Hw Bypass Qc DLOAD
6 BP HW diag & Boot Ap
7 BP HW Bypass BP only
8 BP Sw Bypass RSD
9 Android recovery
10 Boot Android (no BP)
11 Device UID
12 Console=****,***
13 Early Usb Enumeration
14 BP tools
Is there anything I can Do?
Click to expand...
Click to collapse
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
OSNPA said:
If you can get into RSD protocol, flash 4.1.57 full sbf, update to 4.1.83, try again.
Click to expand...
Click to collapse
I can get into RSD. But i updated through the OTA 2.3.4 zip. Im not to sure if its safe to flash older SBF files.
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
unknownerr said:
I'm not entirely sure if this is what you need to do, but...I had 1.83 stock locked, then used the the OTA 2.3.4 zip, then I flashed the Pudding through RSD 5.3.1, and finally I had to use the "moto-fastboot oem unlock" command to unlock my device. I believe I got the same error before doing the unlock command. Confirm with someone else besides me. I don't want to be responsible for anything you do.
Click to expand...
Click to collapse
Thanks.. Had really nothing to lose, so i took the gamble. Finished with the fastboot unlock by navigating through the options. Unlocked the BL.Then the phone rebooted back to gingerbread.
Xenocyde said:
Its safe as long as u used kenneth version
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
No I updated through System recovery.
kenneth version worked for me!
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
I really throws the same error, what should I do? what is the easiest method
fix? thanks
Jnewell05 said:
Your lucky you didn't flash any sbfs because you would have hard bricked. Good call on finishing unlock that's exactly how I had to do it. For anyone else if you flashed the ota don't flash any sbfs.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Just so we're all on the same page, it IS alright to flash fruit cakes. Just a side note...
in this thread talking about flash version 4.1.57 of Kenneth (correct?), someone could help me a bit because they do not find it.
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
And now the phone restarted and it got this message:
SVF:105:1:2
Failed to boot 0x1000
PwrReason: PWR_KEY_PRESS
Starting Fastboot protocol support
Chubby_Skunk said:
Ok so before I take my phone to the shooting range tomorrow. Can someone help me please?
I got this when I tried to flash the [HOWTO] Root any Atrix after .sbf flash. I got the following message when the SBF failed:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
--------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is:
RSD
Starting Fastboot protocol support
If I'm screwed then. I'm done buying phones with f**king locked bootloaders.....
Click to expand...
Click to collapse
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
jruweaver said:
Choose option 2 and follow the instructions to unlock your bootloader. fastboot oem unlock then fastboot oem unlock xxxxxxxxxxxxx(your specific code goes there) it will then bootup.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
God im a dumba**.......
thanks a bunch
Chubby_Skunk said:
God im a dumba**.......
thanks a bunch
Click to expand...
Click to collapse
how were you in "Failed to boot 0x1000" and then had fastboot ????
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
I had this same issue however when i try to unlock it i hear the usb disconnect noise and then it says "FAILED (remote00180001)). I did the exact same things as op up to this point,
maybe this would be the place to look - DEBUG] Calling all (AT&T) 0x1000 'hard' bricks
http://forum.xda-developers.com/showpost.php?p=15573674&postcount=1
I believe this issue has been resolved.
hakemcpu said:
In my case I get "Failed to boot 0x1000" and some other message pops up at the end and then the phone shuts down
Click to expand...
Click to collapse
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
itsauniquesn said:
BUMP... same here. trying to find a resolution before paying 125 for the insurance to replace it with a refurb.
Click to expand...
Click to collapse
Do you have the menu screen?
Sent from my MB860 using XDA App
Hello everyone. If you try to unlock the boot flew error Failed to boot1 and now comes in a RSD Protocol, that would just rolled forward as the firmware and then restore the phone.
Pressing the rocker up and wrote this:
Failed to boot1
PwrReason: usb_cable
Starting Fastboot protocol support
I'll never know what to do next.
Del Post
mopss said:
Hello everyone. If you try to unlock the boot flew error Failed to boot1 and now comes in a RSD Protocol, that would just rolled forward as the firmware and then restore the phone.
Pressing the rocker up and wrote this:
Failed to boot1
PwrReason: usb_cable
Starting Fastboot protocol support
I'll never know what to do next.
Del Post
Click to expand...
Click to collapse
I just had this happen to me 2 weeks ago.
Your only option is to see if you can flash the derpunlock.sbf which is the pudding unlocked boot loader.
You should be able to user RSD Lite to flash.
Then follow unlock procedure.
I am not necessarily a noob at this because I did a lot of this stuff on my old HTC Aria. But I was trying to unlock my BL doing 2.3.4 steps on 2.3.6 and I managed to get this error:
Code:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Availible modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery (NO BP)
Vol up to select, vol down for next choice.
Now I think what happened was that I didn't have my phone USB plug plugged into the back port instead I had it in the front one and caused it to fail.
Does anyone know if it's possible to save my phone, and if so what I could do to unlock boot loader for 2.3.6 or 4.5.141.
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
i got the same problem u used the automatic unlock program.......my phone wont get detected my computer am using a laptop ////
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
AZNSNSAZN said:
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
Click to expand...
Click to collapse
Looks like a hard brick. What did your friend do exactly? What firmware version he had and if he had tried to flash a SBF, what is the version of the SBF?
Share some more details so that we can narrow down on the problem.
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Robert5686 said:
Ok so apparently I flashed a the kitchen sink rom and when phone booted up it stop and said fail to boot 2 but I flashed the and files in the video from qbking77 and now it says fail to boot 4 can anybody help me please. It the only phone I got and I'm not available for an upgrade till february
Click to expand...
Click to collapse
What version soft ware did you start with.
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Robert5686 said:
the android version ? i was running on 2.3.5 it first said fail to boot 2 and thn after i flashed the sbf file it went to boot 4 do u know how i can fix this
Click to expand...
Click to collapse
You can't flash custom ROMs with a locked bootloader
Sent from my MB855 using xda app-developers app
Yeah i didnt know that but idk y does the bootloader have to be unlocked cuz i flashed the beats audio one and didnt do this
What sbf did you flash?
Sent from my MB855 using xda app-developers app
mof9336 said:
What sbf did you flash?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
i flashed the one from qbking77 video i only flashed the one and my batery was drained cuz it wasnt full but the proccess said succes but it went to fail to boot 4 and now it says battery to low to flash but i can get a new battery real quick i jux need to know wat sbf file to flash do u know any that i can flash and would work like i said its the only phone i have and im not available for an upgrade till later and i need my phone
Failed to boot 4 Starting RSD Mode
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Nopudding4u.sbf relocks your phone, however I would recommend using the 198_7.sbf file instead. U can still unlock with pudding.sbf but you will be able to get back running.. after u flash the stock sbf u will probably need to go into recovery and do a factory reset.
Sent from my MB855 using xda app-developers app
Did you fix,
Tempest_Inc said:
The Story:
I started having issues with the phone becoming slower and slower and crash prone so i figured this would be a good time to flash an alternate rom. I have had root for some time and i unlocked the boot loader probably about two weeks ago. I had tried a few roms by Th3Bill and i kept having issues so i thought id try to re-lock the boot loader as i couldn't flash any of his roms even with is recovery in place to see if unlocking it again would solve my issue. Also i was running 2.3.4 NOT 2.3.5 so it wasn't due to that.
I just followed the steps outlined here from Link:
Relocking without Full SBF flash
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Once i completed the Flash nopuding4u.sbf step it failed giving the status: "Failed flashing process. Failed Flashing process. Phone[0000]: THe "Secure_Motorola_Flash" Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secureand not for reflash. (0x7066);Phone connec"
It is not just booting to the first Motorola Dual Core Technology splash screen and showing:
Failed to boot 4
Starting RSD Mode
I've been looking for a solution to the issue for about 30 minutes and have found nothing helpful.
Click to expand...
Click to collapse
Hello, did you fix your phone. i am in the same issue now.. please guide me or help me to fix the phone.I have been trying for 3 days,, thanks.
Tried to flash MIUI without unlocking the bootloader
keljoe2804 said:
Also having the same issue, I just got root, and I tried to install Jellybean from Jokersax with my battery at 5% which was dumb, but anyways now I get failed to boot 4, I can get it into fastboot protocol support, or rsd mode, and that's it, I've tried to flash some stock files, but no good, I also have a locked bootloader & am on 2.3.5
Click to expand...
Click to collapse
It is was initially stuck on failed to boot 2 and Starting RSD mode. Then I used RSD lite to flash the stock sbf, and my computer went to sleep in the middle of the flash and failed. Now it is stuck on Failed to boot 4, Starting RSD mode, Battery is too low to flash.
I am not in the US right now, so cannot take it to the Sprint store. PLEASE HELP!!!