[Q] Need To Learn - HTC Flyer, EVO View 4G

Dear All,
I used leedroid rom for my HTC flyer 3G....when in custom restore after restoring the rom the system shows this message as follows....
If you have acheived S-Off via HTCDev, you will need to extract the boot.img from the ROM.zip and flash it via fastboot
"fasboot flash boot boot.img"
I never did this...( I dont Know wht it means)....Eventhough the flyer works....please explain.
Thanks in Advance...

You need to have fastboot installed on your PC. It should be linked in the op of nearly all threads created by globatron in development. Then you need to get your flyer into fastboot mode, connect to PC, then open a cmd terminal on your PC and enter appropriate fastboot command
Fastboot flash boot boot.img
Easier in the long run to downgrade then achieve true soff hc
Sent from my HTC Flyer P510e using xda premium

Thank you friend

I was new to all this as well when I got my Flyer. Reading is the best route

Thanks XDA
Thanks XDA Members....Got Successfully installed Leedroid ROM....Thanks for the guides and tutorials.

Related

[Q]how to Install Bliss Port [ROM] "Sense 3.5" on CDMA evo 3d rooted HBOOT 1.50 S-ON

[Q]how to Install Bliss Port [ROM] "Sense 3.5" on CDMA evo 3d rooted HBOOT 1.50 S-ON
Could someone plz help me with dis I think I'm frustrated I've looked everywhere for a guide on this I don't know if I'm doing something wrong so plz I need help. the thing is:
I have an evo 3d rooted with htc's unlock method,
HBOOT 1.50 S-ON and TWRP 1.1.1 recovery.
I WANT and have tried and tried to install the bliss version of sense 3.5 [ROM] ported over 2 the evo 3d that I found at "rootzwiki":
The Name of the Rom is: "[WIP] [Rom] Bender-Bliss Version 3 [Sense 3.5] [Android2.3.5]" but I've had no success, It's always stock on boot when I flash.
I really WANT to Flash this rom so Could someone: >>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>!!!!!!!!!!!!!!!!PLZ HELP ME!!!!!!!!!!!!!!!!!<<<<<<<<<<<<<<
[]
[]
[]
THANKS IN ADVANCE
Ok to do this you need to have android sdk and clockworkmod recovery image (its here on the site somewhere). Then what you do next is put the recovery image in the same folder as your fastboot.exe. after that look on your phone and go to "settings>power" and then uncheck fastboot. After that, get on your command prompt on your pc and redirect to your folder with fastboot (it should have adb.exe also) and type "adb reboot-bootloader. Once your phone revolts into bootloader use the power button and select "fastboot" then plug your phone up to your pc. And at the top it should say "fastboot usb". Then go back too the command prompt and type "fastboot boot recovery cwm.img" (or whatever the name of your recovery image is). Now let it finish, and hit the power button again to exit fastboot. Then select recovery, and flash your ROM from here (it needs to be on your SD card). Hope I helped
Sent from my PG86100 using XDA App
ognimnella said:
Ok to do this you need to have android sdk and clockworkmod recovery image (its here on the site somewhere). Then what you do next is put the recovery image in the same folder as your fastboot.exe. after that look on your phone and go to "settings>power" and then uncheck fastboot. After that, get on your command prompt on your pc and redirect to your folder with fastboot (it should have adb.exe also) and type "adb reboot-bootloader. Once your phone revolts into bootloader use the power button and select "fastboot" then plug your phone up to your pc. And at the top it should say "fastboot usb". Then go back too the command prompt and type "fastboot boot recovery cwm.img" (or whatever the name of your recovery image is). Now let it finish, and hit the power button again to exit fastboot. Then select recovery, and flash your ROM from here (it needs to be on your SD card). Hope I helped
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thanks bro I really appreciate ure help I already flashed CWM 4.0.1.4 cuz the latest version (4.0.1.5) doesn't work I've heard dat only 4.0.1.4 works with HTC's unlock method I'll have to wait for the revolutionary method for hboot 1.50
>>>>>>>>>> By now I flashed the rom again and no succes If u now another solution 2 ma problem plz let me know<<<<<<<<.............Thanks anyway man...................
Cuban1t0 said:
Thanks bro I really appreciate ure help I already flashed CWM 4.0.1.4 cuz the latest version (4.0.1.5) doesn't work I've heard dat only 4.0.1.4 works with HTC's unlock method I'll have to wait for the revolutionary method for hboot 1.50
>>>>>>>>>> By now I flashed the rom again and no succes If u now another solution 2 ma problem plz let me know<<<<<<<<.............Thanks anyway man...................
Click to expand...
Click to collapse
No problem man, but just to let you know you HAVE to flash revolutionary clockworkmid from fastboot because it bypasses all security locks and will allow you to flash
Sent from my PG86100 using XDA App
ognimnella said:
Ok to do this you need to have android sdk and clockworkmod recovery image (its here on the site somewhere). Then what you do next is put the recovery image in the same folder as your fastboot.exe. after that look on your phone and go to "settings>power" and then uncheck fastboot. After that, get on your command prompt on your pc and redirect to your folder with fastboot (it should have adb.exe also) and type "adb reboot-bootloader. Once your phone revolts into bootloader use the power button and select "fastboot" then plug your phone up to your pc. And at the top it should say "fastboot usb". Then go back too the command prompt and type "fastboot boot recovery cwm.img" (or whatever the name of your recovery image is). Now let it finish, and hit the power button again to exit fastboot. Then select recovery, and flash your ROM from here (it needs to be on your SD card). Hope I helped
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I think I may finally be understanding...so if you don't have S-Off, flashing a ROM is a two-step process: fastboot to flash protected memory, and then from recover to flash system and data partitions?
Given a particular image, how do I know which fastboot keywords to use? How do I flash a kernel, for example?
ognimnella said:
No problem man, but just to let you know you HAVE to flash revolutionary clockworkmid from fastboot because it bypasses all security locks and will allow you to flash
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Yeah bro I booted into CWM via CMD With my pc on my 3vo n' it worked dat way. I'm just guessing here but i think dat if u have S-ON u have to reboot into recovery via fastboot to flash. Dat way u gain admin privileges and stuff. I think I finally got It, wat a relief !!!

[Q] instaling Leedroid on flyer something wrong

i have acheived S-Off via HTCDev, so that was working,
i extracted the "boot.img" file from the "LeeDrOiD_Flyer_HC_V2.0.0.zip"
i cmd i did "fastboot flash boot boot.img" like explained on http://forum.xda-developers.com/showthread.php?t=1406851
afterwards i did an reboot but i only have an black screen. the flyer won't startup anymore.
anyone an idea what i did wrong.
gr
werners
Did you follow globatron's guide for Honeycomb and s-off?
If so, why didn't you just flash the ROM zip file in recovery?
Edit: Okay, I see, did you flash the ROM zip first, then fastboot flash the boot image?
Sent from my Galaxy Nexus using Tapatalk
Hello,
No i did only fastboot flash the boot image,
now it is not possible to flash the rom.zip i get an error.
I'm totaly lost what to do,
any sugestions?
best regards
werners
What error, usually zips that won't flash in recovery are corrupted download. Did you check md5 sum
Sent from my HTC Flyer P510e using xda premium
If you get into problems with ROMs/flashing, it is essential to include your hboot version in the information you give. Without this nobody can tell you how to proceed.

[Q] Help - HTC Unlocked Bootloader S-on to S-off

After searching the Flyer forum, I am unable to find instruction on how to add a recovery to a HTC Dev unloader bootloader with my updated HoneyComb Flyer.
I did find some instruction for the EVO 3d (below). How would I do it with the Flyer and can I get a link to a recovery img for the flyer?
From http://forum.xda-developers.com/showthread.php?t=1239821
After you've followed their instructions, you can come back here to get your custom recovery and Superuser setup.
So, you got ur Bootloader unlocked via HTC, now, on your phone, go to menu > settings > applications > development and check the box net to usb debugging.
Now, here are the rest of ur required downloads for the next steps:
su 2.3.6.3
TWRP Recovery
Thanks to Brandas for the above version of TWRP that works with HTC's unlock. He posted it in a thread last week, I just tested it and am posting it here.
Here is where he originally posted it, http://forum.xda-developers.com/show...&postcount=223
Take both the su.zip and recovery.img files and put them in your sdk tools folder.
Then, get in your command prompt from ur sdk tools folder.
Small tip, with windows 7, if you hold down the shift key and right click on ur sdk tools folder, the 4th option is to open a command window there. It's much easier then manually navigating there.
Now do the following in ur command prompt, hitting enter after each command.
Code:
adb push recovery.img /sdcard/
And,
Code:
adb push su-2.3.6.3.zip /sdcard/
Then,
Code:
adb reboot bootloader
Ur phone will go to fastboot and should look like the after picture above. Now you can flash the twrp recovery, so do,
Code:
fastboot flash recovery recovery.img
It will ouput something like this,
Code:
sending 'recovery' <5068 KB>... OKAY
writing 'recovery'... OKAY
finished. total time: 11.355s
Now you have twrp recovery, so you can navigate to it. On ur phone, use the power button to pick bootloader, then scroll down to recovery and pick that. You will then be booted into recovery.
Here you can pick "install zip" and then pick the "su-2.3.6.3.zip"
It will flash, the you can pick "back to main menu", then "reboot system now"
You will boot back up and have working Superuser. I have had no trouble with Titanium Backup, Root Explorer, Quick Boot or any other app that requires root. Before you do too much, it would be good to go back to recovery and do a Nandroid backup. Always best to get one ready before you start modding anything.
There is a limitation with HTC's unlock, recovery does not have permission to write to the boot partition, this is where the kernel goes. What this means is that you can't flash a kernel through the normal recovery. Which also means that you can't flash a ROM that requires a custom kernel. There are two ways that I know of to work around this. One is to just flash the kernel(boot.img) from fastboot, the other, and easier way is to boot recovery from fastboot and just do everything from there.
If you are on hc with unlocked boot loader then this shoud do it
Recovery can be found here
http://www.filesonic.com/file/3297714914/revolutionary-cwm-4.0.1.4-flyer.hboot0011.img
Commands to flash while in fastboot on your device
fastboot flash recovery recovery_name.img
Once you have recovery you need this
http://goo-inside.me/superuser/su-3.0-beta4-efgh-signed.zip
You place this on your external sd. Get into recovery, install zip from sd, select su-3.0-beta4-efgh-signed.zip
Sent from my HTC Flyer P510e using xda premium
Thanks. This is great. I will try it tonight.
Sent from my HTC_Flyer_P512_NA using XDA App
mcord11758 this worked perfectly. Thanks.
I read your other posts on this issue. Great stuff.
Thank you again.
No problem
Sent from my HTC Flyer P510e using xda premium
Help please!
I'm new in Flyer flashing. Earlier I was root htc vision and evo 3d, so I know something basic. My Flyer is unlocked but s-on, the former owner unlocked it, I think with htc dev. Now I wanna s-off my device. My question is, do I need to go from the begining with htcdev or I can just contine with downgrade and s-off, because I don't have the htcdev unlock folder?
Thanks in advanced!
Cheers

Flyer WIFI US is dead, I think

Hi eveybody,
I upgrade to HC already and unlock boot loader with HTC web. Press Vol down + power, it informs "Bootloader unlocked" but can't start to normal Android state. I try to restore but it's not response (can't enter to bootloader mode by any ship ROM).
I try to relock bootloader but still not success.
SO now my flyer is used as a brick.
Can anybody help.
Thanks
Flash Flyer CW vie fastboot, then reflash the rom
rakovm said:
Flash Flyer CW vie fastboot, thenh the rom
Click to expand...
Click to collapse
Thank you very much for your reply. Can you write more details, I am a newbie.
Wrong section this should be in q&a
You need to have fast boot installed on your pc
You need cmw zip for flyer hc
You need to place this zip in same directory as Fastboot commands
You need to get into Fastboot mode on your flyer and connect to pc
You need to open a cmd terminal on your pc and change to the directory that contains Fastboot and recovery
Then enter command
Fastboot flash recovery "name of recovery zip"
Then you should be able to get into recovery to flash a hc rom
All of these files can be found in links posted in the op of threads in flyer development. Look for an old thread by Paul obrien (or something like that) about updating to hc leaks. Everything you need should be there
mcord11758 said:
Wrong section this should be in q&a
You need to have fast boot installed on your pc
You need cmw zip for flyer hc
You need to place this zip in same directory as Fastboot commands
You need to get into Fastboot mode on your flyer and connect to pc
You need to open a cmd terminal on your pc and change to the directory that contains Fastboot and recovery
Then enter command
Fastboot flash recovery "name of recovery zip"
Then you should be able to get into recovery to flash a hc rom
All of these files can be found in links posted in the op of threads in flyer development. Look for an old thread by Paul obrien (or something like that) about updating to hc leaks. Everything you need should be there
Click to expand...
Click to collapse
I did........ but it is fail. My boot menu "freeze". I have to Vol Down + Power to restart. Is my root damage?
Sorry to ask many question.

S-on device kernel

Hello guys,
I couldn't get into this rooting stuff much. My device was unlocked and i flash twrp recovery. When I try to install a Rom such as miui it was stucking installing the buttered kernel. My device was not s-off. This could be a problem? I read something about flashing the boot.IMG file from the rom's zip file. Could you enlight my way. After I messed up my phone when got lost my hope to recover I used ruu shooter to get back.
Thanks.
Sent from my HTC EVO 3D X515m using xda app-developers app
salihk. said:
Hello guys,
I couldn't get into this rooting stuff much. My device was unlocked and i flash twrp recovery. When I try to install a Rom such as miui it was stucking installing the buttered kernel. My device was not s-off. This could be a problem? I read something about flashing the boot.IMG file from the rom's zip file. Could you enlight my way. After I messed up my phone when got lost my hope to recover I used ruu shooter to get back.
Thanks.
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
Ill be glad to help you with this. With being s-on and unlocked you have access to the nand memory, recovery and system partitions but no access to boot partition which is where your kernel sits at. There's a few ways to work around this. You could download 4ext updater from google play and flash 4ext recovery onto your phone. Upon flashing is finished in the app it will ask you if your device is s-on. click yes and it will enable smartflash. This is a feature that will allow you to flash kernels through recovery means.You can turn this feature on in off in the recovery itself. You could pay a dollar and buy Flash Gui Image which is another great app for s-on users that will allow you to flash kernels and recoveries through the app itself. Of course there's a quick and easy way to gain s-off using ramjets guide. Here's the link http://forum.xda-developers.com/showthread.php?t=1889438 Now this is for cdma users only (sprint and virgin mobile) However if you are gsm heres the guide for that as well http://forum.xda-developers.com/showthread.php?t=1743466 Follow method c if your hboot is 1.49 and method d if it is 1.53 The choice is yours sir. Goodluck
salihk. said:
Hello guys,
I couldn't get into this rooting stuff much. My device was unlocked and i flash twrp recovery. When I try to install a Rom such as miui it was stucking installing the buttered kernel. My device was not s-off. This could be a problem? I read something about flashing the boot.IMG file from the rom's zip file. Could you enlight my way. After I messed up my phone when got lost my hope to recover I used ruu shooter to get back.
Thanks.
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
You need to flash boot image.Here are the steps
1)enter recovery on phone,claer,delvik,clear battery stats,format everything but sd card
2) copy BOOT.IMG from what ever rom you are trying to flash (move to a folder on your c drive)
3) then set phone for fastboot usb
4) then open cmd on your computer open comand folder
5) use this comand next fastboot flash boot boot.img
6)then your boot img will flash and will take about 11 seconds or so
7) next open recovery on phone
8)clear delvik again and battery stats
9) install rom
10) clear delvik again then reboot,all should work
I do suggest going s-off it is really easy and eliminates alot of these steps.
Dont forget to hit the thanks button if this helps!!
HTC EVO 3D
HBOOT 1.58
JuopunutBear S-OFF
4EXT Touchcovery
Kernel ButteredToasT ICS RLS14
SmoothCriminal-v 2.2
wcctom said:
You need to flash boot image.Here are the steps
1)enter recovery on phone,claer,delvik,clear battery stats,format everything but sd card
2) copy BOOT.IMG from what ever rom you are trying to flash (move to a folder on your c drive)
3) then set phone for fastboot usb
4) then open cmd on your computer open comand folder
5) use this comand next fastboot flash boot boot.img
6)then your boot img will flash and will take about 11 seconds or so
7) next open recovery on phone
8)clear delvik again and battery stats
9) install rom
10) clear delvik again then reboot,all should work
I do suggest going s-off it is really easy and eliminates alot of these steps.
Dont forget to hit the thanks button if this helps!!
HTC EVO 3D
HBOOT 1.58
JuopunutBear S-OFF
4EXT Touchcovery
Kernel ButteredToasT ICS RLS14
SmoothCriminal-v 2.2
Click to expand...
Click to collapse
If you read my post it already stated the easier options to flashing kernels ( purely his preference of method) I just laid out easier options for him than rather jumping through hoops to flash kernels. I also gave him links to where he can gain s-off ( again his choice if he wants to or not). It just seems redundant to restate basically what I just said. Not trying to be a douche at all.
With you on that,don't think your douche! Lol,sometimes putting the steps in outline forms helps noobs. I know when I first started to root my 3D and load roms,it took me a while to understand it. But hopefully we both were able to help.
Sent from my PG86100 using xda app-developers app
With all the options laid out for him he should be fine thanks to both our insights.:highfive:

Categories

Resources