Could anyone please tell me the settings and profiles that will give my x10 mini the best battery save? thanks
actually there is already a preset for that ..the "powersave" one..
Easy, just put both bars in 122880MHz..
Your phone are going to be rrrrreeeaaaallllyyy slow, but you save lots of milliamps
Use ondemand only. And set min to 122 and max to 600.
I use a profile when screen is off that set min to 128 and max to 320, ondemand too.
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Has anyone had problems with random freezes and reboots with SetCPU installed? I've had a couple random reboots, so for now I've uninstalled SetCPU to see if the problem goes away. I also have Advanced Task Killer installed but it wasn't set to kill tasks automatically.
raiderkilo said:
Step 1: Once the app has downloaded from the market open it.
Step 2: Hit auto recommend speeds on the first boot up of the app.
Step 3: Click the profile tab at the top.
Step 4: Hit Add Profile.
Step 5: The profile button selects what happens for the CPU to under clock or over clock. The max is the max the CPU will reach; the min is the minimum the CPU will reach.
Step 6: Profile: Screen off. Max: set to minimum. Min: set to minimum. Scaling: set to Conservative. Priority: set to 100. Press okay, and hit Enable.
Thanks to Ultralinks
Click to expand...
Click to collapse
Setting SetCPU like that is not very smart. For example, You have Your screen off, someone is calling You, what happens? You get the call ringer after few seconds (sometimes even 10-15!). Reminds of old Symbian versions? But just this. Next example - You have Your screen off, and You receive sms. What happens if You are using Handcent, and have to go to the app manually after phone wakes up? It takes ages... But if You have more than 1000 massages in Your inbox, and a new one come, and You get it after screen wakes up it can even lead to a reboot.
Lets add some random weird situations if You are listening to Your player while the screen is off... using some third party apps, etc...
Setting the minimum CPU for the screen off is not a good idea. Don't do that, or the phone will fail You in most unwanted cases.
so what are you guys using?
I am 122-600 on normal ondemand
and screen off on 122-256 ondemand
Anyone with better profiles?
just dont overclock!!!
why not? I see you are running 729/600.
WHY is your min 600?
Use smartass governor - auto profile, just upgrade to gingerbread.. best profile yet..
Set normal use 122Mhz-729Mhz 100% Priority
Set for charging: 122Mhz-245Mhz (or similar) - 100% Priority
Set for screen off 122-245 (or similar) - 100% Priority
^ this saved me battery when I used my phone for so much else besides calling and texting.
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
achyut said:
for good batter backup....set the minimum as 122Mhz and the max as 480 Mhz....anything above 748 and below 480 will get u into "restart & restore"...however, there is a overclock module allowing you to overclock to 825 Mhz (but dats juss fr "testin"...u'll lose battery like a freak and will get awfully hot readings)
Click to expand...
Click to collapse
Only a handful devices supports being clocked to 825Mhz but it's very dangerous.
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
ruifung said:
I doubt you can raise the clock speed to 825Mhz without the phone freezing up.
Click to expand...
Click to collapse
Some have succeeded, but I doubt their phones lasted very long after that.
Just wondering, is the phones processor under the right side of the keyboard? cause after a few minutes @ 710Mhz, that area is hot. Since I switched to the smartass governor, it rarely is hot anymore (due to the fact it mostly spends time @ 245/320Mhz
Um... question?
Shouldn't the phone go into deep sleep when the screen is off with no cpu activity?
Also install cpu spy and see what the cpu is doing for how long.
https://market.android.com/details?id=com.bvalosek.cpuspy
1. The cpu does not make the most heat... it's the 3G radio.
2. Cpu should deep sleep automatically.
My OC prifile for mini pro:
Standard profile- 122 - 825mhz
If Battery < 15% then 122 - 600 "this gets rid of crashes due to low power OC"
Also.. i asked some of the developers that made the modules for overclocking and undervolting.
It's undervolting there is no upward voltage bump so it can't really nuke a cpu.
But you can nuke the power circuits if you use heavy internet on 3G and charge at the same time.
How can I put over 600 Mhz?
My SetCPU makes 600 Mhz the max. I want to put just on 700, but I can't. What is the problem?
@Felimenta97:
You don't have any overclock-enabler module installed/insmodded or if using any CM-based ROM, the corresponding setting is disabled.
I'm using smartass with 122-320 for screen off and ondemand with 320-729 for normal, no problems so far
The max MHz I could get was 729MHz, 748MHz worked but after some time the CPU got 'pegged' as said in the logcat
Tried the 825MHz setting that only caused a freeze and boot loop, forcing me to do some fast adb commands to get rid of the overclock
any app out there that cud do this ?? Setcpu profiles arent working fine on stock 2.3.3 with franco's kernel and cpu is stuck at 245 mhz with screen off and freq is not rising when i unlock the phone i have to do it manually ..anybody got any fixes for deep sleeping my phone ??? I want to save battery which btw sucks on this russian v20b
ok.. iam new at this overclock thing..one question why when i change min and max i get random boot but when i turn on it still the same??
It just means your hardware cant handle the settings you made. Try adjusting again until its stable.
hello to everyone. I have a problem with my device. When I am running apps such as facebook, after 5 minutes of usage or after 10 15 minutes, the screen freezes, I cant press anything and after 8-10 seconds the phone reboots by itself:-(. I cant find the reason. Here are my device settings
CPU Settings:
Governors: ONDEMAND
Min CPU Freq: 122 MHz
Max CPU Freq: 691 MHz (i was using 729 I thought reducing this one, would fix my problem.)
About my phone:
Kernel Version: 2. 6. 29. [email protected] 1
Mod Version: Froyo MiniCM/CMv6 Hybrid by slade87 and owain94. v6.0
Where is the problem???
any background apps running?
you are using really outdated rom, probably you will have better overclocking possibilities with newer roms and kernels.
and try returning to default cpu values and see if it reboots.
This might be a stupid question, but I have a Motorola RAZR (stock ROM and no root) and it seems that practically every time that I switch on my screen, the phone spikes CPU to 100% and seems to cycle through every application (according to Cool Tool Pro CPU Monitor). This takes it about 2-3 minutes and then CPU goes down and stays down (for the most part). Unfortunately this renders the phone virtually useless for the time that the CPU is at 100%. I have checked to make sure that WiFi stays active during sleep and I get notifications and messages while the screen is off, but whenever I want to use my phone I experience the above situation. Does anyone have any similar experience? Does anyone have any ideas or suggestions on how to correct this? (Aside from getting a new phone)
Appreciate any help! Thanks.
peridoc said:
This might be a stupid question, but I have a Motorola RAZR (stock ROM and no root) and it seems that practically every time that I switch on my screen, the phone spikes CPU to 100% and seems to cycle through every application (according to Cool Tool Pro CPU Monitor). This takes it about 2-3 minutes and then CPU goes down and stays down (for the most part). Unfortunately this renders the phone virtually useless for the time that the CPU is at 100%. I have checked to make sure that WiFi stays active during sleep and I get notifications and messages while the screen is off, but whenever I want to use my phone I experience the above situation. Does anyone have any similar experience? Does anyone have any ideas or suggestions on how to correct this? (Aside from getting a new phone)
Appreciate any help! Thanks.
Click to expand...
Click to collapse
Is your cpu schedule set on performance?try interactive if don't work Try a factory reset...you are on 4.1.2 right?
Inviato dal mio XT910 usando XDA Premium HD app
Vallerino WR said:
Is your cpu schedule set on performance?try interactive if don't work Try a factory reset...you are on 4.1.2 right?
Inviato dal mio XT910 usando XDA Premium HD app
Click to expand...
Click to collapse
I am on 4.1.2. Where do you adjust the CPU schedule setting?
Thanks.
peridoc said:
I am on 4.1.2. Where do you adjust the CPU schedule setting?
Thanks.
Click to expand...
Click to collapse
try cpu adjuster https://play.google.com/store/apps/details?id=com.ryosoftware.cputweaks