Hi eveybody,
I upgrade to HC already and unlock boot loader with HTC web. Press Vol down + power, it informs "Bootloader unlocked" but can't start to normal Android state. I try to restore but it's not response (can't enter to bootloader mode by any ship ROM).
I try to relock bootloader but still not success.
SO now my flyer is used as a brick.
Can anybody help.
Thanks
Fastboot, flash recovery then flash a hc rom
Sent from my HTC Flyer P512 using xda premium
Related
After update successfully the bootloader and radio (hard spl 2.47 and 3.42.50) from the stock USCC bootloader and radio I couldn't get past HTC screen logo. I noticed I could get into bootloader mode but I read something about take the battery out for a few minutes and after that I couln't get past HTC screen neither get into bootloader mode. I was reading about something called "download mode" brick!!! Am I one...
any help it would be greatly appreciated
thanks
Marcelo
Are you holding power, camera, and reset to enter bootloader?
You said you upgraded the SPL and the Radio...but what ROM are you using? Are you still on a stock ROM?
I tried to get into bootloader with camera + power + reset button with no success. I still have the stock rom in it!!!
Did you hold then all in at the same time for 5 seconds?
Yes I did!
You could try to install a new rom when you get to the htc screen. But I doubt it installs.
Hello!
My friend's Flyer 3G has some kind of problem, and I can't go through it.
I would like to install the original GB RUU, but I can't get to the recovery. I put the flyer onto the PC then happens nothing. Just the flashing orange led at the power button.
How can I recover this problem? I need your help guys!
What did you do to get here
Sent from my HTC Flyer P510e using xda premium
What is the battery level? I foolishly started my rooting with only 15% battery and needless to say I had to stop halfway through and charge it on the wall charger.
same problem with me, please help
solved
i found the guide here
now my flyer can turn on...
proceed to the next step
Flyer Now With Stock Shipped ROM (Solved)
jendar_hoppus said:
i found the guide here
now my flyer can turn on...
proceed to the next step
Click to expand...
Click to collapse
download the correct RUU here
- go to fastboot,
- connect the fyer to PC
- at the command line is typed fastboot oem lock
if the top line menu fastboot *** RELOCKED ***
without leaving the menu fastboot start installing the Correct RUU
I was trying to install a Custom ROM to AT&T Atrix 4g with 2.3.6. But stuck the boot screen now with below error.
The phone was rooted and installed the CWM using the below link
http://atrix4ghacks.com/atrix-4g-hacks/how-to-install-clockworkmod-recovery-on-atrix-4g/
Used the CWM to install the Custom ROM from
http://forum.xda-developers.com/showthread.php?t=1957539
When i tried installing it showed the completed message in few seconds and after the mobile restart
Here is the situation today.
-Normal boot
SVF:108:1:2
Failed to boot 3
Starting RSD mode
-Power Button + VOL DOWN
Blank Screen after a fraction of second, cannot see the exact message
-Power Button + VOL UP + VOL DOWN
SVF:108:1:2
Failed to boot 3
Starting Fastboot protocol support
-Power Button + VOL UP
SVF:108:1:2
Failed to boot 3
Starting Fastboot protocol support
This phone was replaced by motorola couple of months back and came with 2.3.6 OS, so not sure if this was any different from original Atrix 4g models.
Please help me to unbrick my phone!
Looks like Bootloader is still locked
Looks like you never unlocked the bootloader before install a custom rom..
This should get you out of the woods, http://forum.xda-developers.com/showthread.php?t=1182871
Fix softbrick
unlock your bootloader (This will void your warranty for sure)
Install a recovery
then install a rom
Exactly have you unlocked the bootloader before rooting?.
Sent from my MB860 using xda app-developers app
I was flashing Vipers RUU to go back to S-on from Moonshine, While it was flashing my phone got disconnected from my laptop and now I have a black screen that's says htc and triangles in all 4 corners when I plug it into my laptop. Now my laptop wont recognize the phone.
when unplugged I have a white screen that says
Tampered
locked
jewel pvt ship s-off rl
hboot 2.09
RUU
Can it be saved?
Your phone isn't bricked. From the bootloader screen (the screen with the information you posted) use the volume buttons to highlight the "Reboot" option, then hit power to select and see what happens. Your other option is to run ViperRUU again from the bootloader via Fastboot USB mode.
Sent from my EVO using XDA Premium 4 mobile app
FinZ28 said:
Your phone isn't bricked. From the bootloader screen (the screen with the information you posted) use the volume buttons to highlight the "Reboot" option, then hit power to select and see what happens. Your other option is to run ViperRUU again from the bootloader via Fastboot USB mode.
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The bootloader screen has no other options besides the RUU, I tried the power button on it (it didn't work)
How can I use fastboot USB mode if my laptop isn't recognizing the phone?
launygirl said:
The bootloader screen has no other options besides the RUU, I tried the power button on it (it didn't work)
How can I use fastboot USB mode if my laptop isn't recognizing the phone?
Click to expand...
Click to collapse
Re install HTC driver's, resrart your computer, then try the method above.
Sent from my EVO using xda premium
Hi,
I have been following the instructions from htc dev for unlocking the botloader of my HTC Explorer (Pico). However after unlocking the bootloader,
the HTC dev site and many other forums tell me that the phone will be reset to the factory condition. But my phone is just as it was before, no changes have been made, except in the menu which shows up when you hold down your power button+ volume down key, it shows the title **UNLOCKED**.
So is it really unlocked? Can I go on with completing the rooting process and installing a ROM?
Please help!
It is correct, nothing on the system will change but you now have the ability to write to the partitions containing BOOT, SYSTEM and RECOVERY.
Bashing away at my HTC Desire C