I was trying to install a Custom ROM to AT&T Atrix 4g with 2.3.6. But stuck the boot screen now with below error.
The phone was rooted and installed the CWM using the below link
http://atrix4ghacks.com/atrix-4g-hacks/how-to-install-clockworkmod-recovery-on-atrix-4g/
Used the CWM to install the Custom ROM from
http://forum.xda-developers.com/showthread.php?t=1957539
When i tried installing it showed the completed message in few seconds and after the mobile restart
Here is the situation today.
-Normal boot
SVF:108:1:2
Failed to boot 3
Starting RSD mode
-Power Button + VOL DOWN
Blank Screen after a fraction of second, cannot see the exact message
-Power Button + VOL UP + VOL DOWN
SVF:108:1:2
Failed to boot 3
Starting Fastboot protocol support
-Power Button + VOL UP
SVF:108:1:2
Failed to boot 3
Starting Fastboot protocol support
This phone was replaced by motorola couple of months back and came with 2.3.6 OS, so not sure if this was any different from original Atrix 4g models.
Please help me to unbrick my phone!
Looks like Bootloader is still locked
Looks like you never unlocked the bootloader before install a custom rom..
This should get you out of the woods, http://forum.xda-developers.com/showthread.php?t=1182871
Fix softbrick
unlock your bootloader (This will void your warranty for sure)
Install a recovery
then install a rom
Exactly have you unlocked the bootloader before rooting?.
Sent from my MB860 using xda app-developers app
Related
Hi Guys, I need your help!
I'm trying to boot my phone into CR or Download mode, the problem is that I can't.
CR - never worked trying to boot the phone into Clockwork Recovery, I've always had to do it via rom manager.
Download mode (Odin) - I need to be able to plug my phone in and boot holding vol up & vol down, but when I plug my phone in, it gets stuck on the battery icon (with the refreshing circle) and the menu & back lights come on. I have to hold the power button to get rid of the battery screen, but if I keep it plugged in, it keeps loading it faster than I can boot.
this wasn't such a problem until recently, because I had a working rom. I booted into clockwork recovery to install a nightly CM build (116) and now I'm stuck in the boot loop. Please help!
BACKGROUND INFO:
PHONE : GALAXY S 2 (i9100)
ROM : [ICS][MIUI]AdyScorpiusMIUI v4 v2.1
CARRIER : T-MOBILE UK
So Vol up + home + power isn't getting you into CWMr?
Did you flash CM7 twice when you initially flashed it?
Edit: are you on a GB or ICS bootloader?
Miracle
Thanks for the reply, Just got around it by trying to boot over and over. Eventually it worked. Flashing via ODIN now. Result!
I have a strange situation with my Razr XT910, let me explain to you guys and please tell me what to do:
1- My Razr was on 2.3.6
2- I rooted it, but I cannot remember which method as I tried many ways and cannot really remember which one succeeded.
3- After rooting I flashed a 4.0.4 AOKP-GSM-J.Y.Daddy rom
4- I have several issues with the rom so I want to install another rom, so I tried Eternity project rom. It didn't work and gives me message "Installation aborted", so I gave up.
5- Decided to go back to stock rom, so downloaded the right SBF and RSD lite.
6- I put the USB debugging on
7- I turned my phone off and go to boot loader mod by holding Volume +/- and power buttons and go to SBF flash, connect the USB cable and hear the notification sound from my laptop. No message received from the PC saying installing device. Receive message from RSD USB connected and one clicked show device it gives everything N/A
8- Uncompressed the SBF and pressed start. Then process FAIL
9- Now, tried to turn the phone on, I have to go to to Fastboot mode and press power long then screen goes off. Then I press volume +/- with power again to go to bootloader mode then choose normal reboot to turn my phone back.
10- Tried the above steps over than 30 times for 2 days. Suddenly I discovered that my phone is unrooted when I tried to install any app requires rooting such as Titanium.
My ICS works fine with some bugs, I still wants to go back.
Can any one help me, I explained everything I'm going through.
Appreciated.
flupo2000 said:
I have a strange situation with my Razr XT910, let me explain to you guys and please tell me what to do:
1- My Razr was on 2.3.6
2- I rooted it, but I cannot remember which method as I tried many ways and cannot really remember which one succeeded.
3- After rooting I flashed a 4.0.4 AOKP-GSM-J.Y.Daddy rom
4- I have several issues with the rom so I want to install another rom, so I tried Eternity project rom. It didn't work and gives me message "Installation aborted", so I gave up.
5- Decided to go back to stock rom, so downloaded the right SBF and RSD lite.
6- I put the USB debugging on
7- I turned my phone off and go to boot loader mod by holding Volume +/- and power buttons and go to SBF flash, connect the USB cable and hear the notification sound from my laptop. No message received from the PC saying installing device. Receive message from RSD USB connected and one clicked show device it gives everything N/A
8- Uncompressed the SBF and pressed start. Then process FAIL
9- Now, tried to turn the phone on, I have to go to to Fastboot mode and press power long then screen goes off. Then I press volume +/- with power again to go to bootloader mode then choose normal reboot to turn my phone back.
10- Tried the above steps over than 30 times for 2 days. Suddenly I discovered that my phone is unrooted when I tried to install any app requires rooting such as Titanium.
My ICS works fine with some bugs, I still wants to go back.
Can any one help me, I explained everything I'm going through.
Appreciated.
Click to expand...
Click to collapse
Unplug razr from pc
Uninstall all razr software
Reinstall motocast 1.29
Plug razr, let drivers reinstall
Turn it of
Go into fastboot menu
Wait drivers reinstall
Flash .sbf
Cheers
Sent from my XT910 using Tapatalk 2
Thanks dear, that's exactly what I did 30 times and I keep getting same message on RSD "FAIL"
Now I tried this http://forum.xda-developers.com/showthread.php?t=1486718
and choose # 1 restore EU GSM and I was stuck in a boot loading loop.
Any time I try an option with my phone I go to this screen:
AP Fastboot Flash Mode (s) (Flash Failure)
OA.GC
To return to normal mode-first press power key to power down
Device is LOCKED. Status Code:0
Battery OK
OK to Program
Connect USB
Data Cable
flupo2000 said:
Thanks dear, that's exactly what I did 30 times and I keep getting same message on RSD "FAIL"
Now I tried this http://forum.xda-developers.com/showthread.php?t=1486718
and choose # 1 restore EU GSM and I was stuck in a boot loading loop.
Any time I try an option with my phone I go to this screen:
AP Fastboot Flash Mode (s) (Flash Failure)
OA.GC
To return to normal mode-first press power key to power down
Device is LOCKED. Status Code:0
Battery OK
OK to Program
Connect USB
Data Cable
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1453660
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
Try this
http://forum.xda-developers.com/showthread.php?t=1453660
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Thanks again,
I forced it to close then it was booted to a screen (not CWmod) which enabled me to wipe the data and restore factory sittings and it worked. Now the phone like brand new and I installed the update to 2.3.6
My Razr was bricked a few months ago, After I repaired it at a mobile store ( My phone is TX910s-korean)
Now, when i press "power button", it boot into logo "moto" with the following words:
When i press vol - + Power button to enter AP flashmode:
AP Fastboot Flash Mode(S)
0A.74
eMMC Info: Size 16G
To return to normal- first press power key to power down
Device is LOKED, Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cabe
When i press power to boot , it appeared the following line with logo "red moto":
CustomerId error, contact dealer
boot to suspend/TCMD mode:dead:0007:0000000:00000cc
After it boot into rom normally. ( now, my rom : 673.94.328.XT910.PSHAsiaRetail.en.03)
boot magager installed according to rom, shop-assistant told me " if i uninstall boot manager, my phone can not boot anymore, so, when i need flash a new rom, i must take it into his store, i shouldn't flash myself"
So, My question:
Can I uninstall boot manager , how must i do this? ( keeping my phone booting normally)
I want to flash Miui Rom or new Rom , how must i do this?
Bootloader is now 0A.74 , can I downgrade it?
I am so sorry because of my english!!!
There's nothing I now to fix your Rua azr.
It's cid partition was erased and cannot be recovered. Also you need a factory cable to flash a stock rom.
You can get it to work, but that "user id error" is not recoverable.
Cheers
Sent from my XT910 using xda premium
Thanks for your help but i have a question, which stock rom should i flash or i can flash any rom from korean, which case id error can be fixed..thanks, in case, i want to flash miui rom, it's posible
Sent from my motorola tx910 using xda premium
Where can i get a stock rom for my case, if i uninstall boot menu , what will happen when i reboot again???, if i enter cwm and flash miui rom, this will run ? Sorry for many question from me
Sent from my motorola tx910 using xda premium
ID error can't be fixed. It's a permanent damage.
You can flash any rom to your CID erased Razr.
Cheers
pedrotorresfilho said:
ID error can't be fixed. It's a permanent damage.
You can flash any rom to your CID erased Razr.
Cheers
Click to expand...
Click to collapse
what is CID? I'm sorry but how can i flash rom to my erase Razr or i just boot into CWM and flash anyrom in normal way!!!
Can I uninstall boot menu from my current rom? IF i do this, can i reboot normally without error?
Thanks very much for your advice!!
In my case, my phone cid was unlocked? So, i can flash free any rom ( my phone us running android 4, can i flash again android 2.5?), or i can flash via rsd or stock recovery? Who can instruct me flash a other rom? What is Diference between Unlocked bootloader and cid ?
Sent from my motorola tx910 using xda premium
anyone help me,
i have the same problem with #1 but i had backup my cid to my laptop, my phone is XT909 from Japan
i connect phone to charger but it didn't charging , only have white light, i'm using adb to flash .img follow http://forum.xda-developers.com/showthread.php?t=1634223 but failure because LOW Battey
When i press vol - + Power button to enter AP flashmode:
AP Fastboot Flash Mode(S)
0A.74
eMMC Info: Size 16G
To return to normal- first press power key to power down
Device is LOKED, Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cabe
Click to expand...
Click to collapse
]
:angel::angel:
I'm a n00b and I need help. I've spent lots of time reading xda forums and haven't found anything that really fits my case.
Motorola Atrix ME860. Chinese version which means that it doesn't have Google Play store or anything. Running Froyo 2.2.2.
Because it has a really ****ty Chinese OS, the ultimate goal is to flash CyanogenMod 9. Got Gingerbreak app's .apk via phone browser and successfully rooted the phone.
I'm on a Mac, so I had to use Parallels to attempt unlocking the bootloader. Successfully installed Motorola Drivers, RSD Lite, Android SDK (downloaded SDK Tools and Google USB Driver).
Used RSD Lite to try flashing the Pudding IHOP international users bootloader unlocking sbf file. Yes, I've seen the comments on that link about Chinese phones. Wasn't concerned because I've never accepted any OTA updates or flashed down to Froyo as discussed here. I don't know why, but RSD Lite didn't successfully flash the unlock sbf file.
CURRENT SITUATION:
Power + up volume = SVF: 108:1:2 Failed to boot 3 Starting Fastboot protocol support
Power + down volume = SVF: 108:1:2 Failed to boot 3 Entering nv flash recovery mode (It flashes this for about three tenths of a second and then the screen goes black.)
----------------------------------
•Have I bricked my phone?
•What's the next step? The power + up volume option seems to show some promise....
•Can I flash a 2.2.3 Gingerbread file to at least be able to USE the phone and then try unlocking the bootloader again?
Because I'm a n00b, if you have advice/directions, the more specific the better. Thank you very much.
Power + up volume = SVF: 108:1:2 Failed to boot 3 Starting Fastboot protocol support
Power + down volume = SVF: 108:1:2 Failed to boot 3 Entering nv flash recovery mode (It flashes this for about three tenths of a second and then the screen goes black.)
I have exactly the same problem, could you fix this?? could you tell me how?? please, I have been looking on google like for 6 hours now.
thanks !!!!!! I would really appreciate any advice!!
rf3003 said:
Power + up volume = SVF: 108:1:2 Failed to boot 3 Starting Fastboot protocol support
Power + down volume = SVF: 108:1:2 Failed to boot 3 Entering nv flash recovery mode (It flashes this for about three tenths of a second and then the screen goes black.)
I have exactly the same problem, could you fix this?? could you tell me how?? please, I have been looking on google like for 6 hours now.
thanks !!!!!! I would really appreciate any advice!!
Click to expand...
Click to collapse
Sorry, but I never found out a solution. I gave up after spending wwwwaaaaaaay too much time on the problem I'm not sure where you're living in the world, but look into getting some help from an "Android Ninja" on Craigslist.
If you can enter fastboot mode, try flashing a custom recovery.
lsmithmith said:
Sorry, but I never found out a solution. I gave up after spending wwwwaaaaaaay too much time on the problem I'm not sure where you're living in the world, but look into getting some help from an "Android Ninja" on Craigslist.
Click to expand...
Click to collapse
actually you did miss something. how about just power on. no vol up or down, just turn the device on. that should allow you to use RSD support and flash a sbf file. or you can enter into fastboot mode and flash each partition with its corresponding img file
Sent from my MB860 using xda app-developers app
Hi,
I could really need some help.
What happend, i prepared to go from HairyBean to CM11 downloaded bootloader files roms, ...
Via the Power Menu i could not reboot into recovery so I tried via GooManager.
After this:
The Prime gets stuck hat the boot screen ( The Device is unlocked + Asus Logo )
If i reboot the device with both Vol Down + Vol Up pressed the screen stay dark but i get an APX Device ( via USB)
I red through some threads about wheelie blobs and ?? but could sort things out.
Any help is highly welcome !
Br,
Jörg
Hi,
Results so far
- can not boot to recovery
- can not boot to fastboot
- can not boot to android os
- can boot to apx (with screen dark)
which is not of any use because i do not have to blob files ( and i believe it is not possible to create them with then bootloader which was installed)
last thing it did:
boot to recovery via goomanager
so i thing this caused the brick
Br,
What happens when you power on the device while holding only the volume down button?
Sent from my SO-04E using xda app-developers app
kokopuphz said:
What happens when you power on the device while holding only the volume down button?
Sent from my SO-04E using xda app-developers app
Click to expand...
Click to collapse
It will get stuck at the screen with message:
device unlocked and the Asus logo
..invite, longer the 60 mins
br
Jörg
i to appear to be stuck in exactly the same situation, if anyone can shed any light? no errors or nothing i tried CWM install via rom manager,