Related
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
richfreestone said:
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
Click to expand...
Click to collapse
I've installed a couple of the nightlies and not had major issues. There were indeed bugs, which made me move on to other ROMs (among other reasons, including the fact that my old HD2 had CM7 and it got a bit old).
As far as my experience goes, the nightlies have been quite stable. As mentioned, there were bugs here and there, and a force close from time to time. But I didn't have the problem you've mentioned with hanging at install.
They did take a while to load the first time, longer than I remember was the case on my HD2. Did you wait long enough? Delvic/cache cleared?
EDIT: I also found a CM9 around New Years, but it wasn't as stable and had charging issues. But I think it's out and the waiting's over, really.
EDIT AGAIN: The other option would be to try out the official ICS release, which can be found at samfirmware.com. That's my plan for the weekend.
like the previous...Sounds like your flashing over existing roms without wiping everything first...From recovery mode after backing up, the best way I find is to wipe data/clear cache and wipe dalvic cache from advanced menu before flashing any roms...that way your starting with a clean slate and will be less conflictions from old to new.
for me CM7.1 not stable
I'm waiting a stable CM9 its promising
If you follow the instructions on how to install it, it's stable for everyone. I'm using it for many many months now, and it's stable.
If you're coming from other ROM's, make sure you do a FULL wipe, and flash the rom TWICE in a row, without rebooting recovery.
And yes, we're waiting for CM9. CM7 is not supported anymore for SGSII.
I cleared the data, the cache, went into advanced and cleared the dalvik cache.
Installed the nightly, which I thought was trange was only 100mb, normally ROM's are like 300mb.
I'll try flashing the ROM twice as TheSaw has said. However, after seeing that CM7 isn't supported, I may think twice, i'm just getting bored of the stock.
Might also be worth noting, i'm using [email protected] #k2-18 kernel.
Also, by the way Sean is here, did you know you've got a USA flag in your mini profile under your username? will the official release be a odin flash? or can I just use a .zip through CWM to flash it? and would I still be able to use the speedmod kernel with ICS?
Always working for me and thousands of others .
Usual story is wrong install .
jje
I managed to get this working, by installing the ROM once, and then installing it again straight after.
I was just wondering, is there a way to move the lock screen lock down to the bottom of the screen, i.e. above the unlock and camera buttons? and is there a way to change the clock?
Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Well, all I can say is to make sure you have a half decent kernel, and make sure you're using the right gapps. No reason it should crash on you.
actually im in the same boat. had to use waze (not bad at all), just wish it works.
Misterblc said:
Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Click to expand...
Click to collapse
I have the same issue. Eventually I was going to get around to trying a different kernel.
I am running the Kernel from the CM10 build:
3.0.53-dc2c1ebb
[email protected] #1
Mon Dec 3 21:32:25 PST 2012
As for the GAPPS I just installed the latest I could find with the ROM and then downloaded the latest Maps from the market.
Any recommendations on a good kernel to try?
This is a widespread issue for unrooted, stock users. It is documented in several forums, so it does not only affect you or other rooted users.
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Naters,
I haven't tried using the IRC build...do you have a link / instructions on how to get that (and the GAPPS). I will try loading up MeanROM, getting a sense lock, and then switching to that build.
Thanks!
Brian
NaterTots said:
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Click to expand...
Click to collapse
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Tried it, some problem unfortunately...I guess this is a YMMV type thing.
BTW, is that IRC channel a good place to get support for CM10? I was hoping to talk with the developers and try to help out with kernel logs or whatever may be useful.
Brian
NaterTots said:
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Click to expand...
Click to collapse
Sorry it didn't work.
No clue why it works for some and not others.
Sent from my PC36100 using xda app-developers app
Working now
I was having a lot of problems with the navigation until looked in the location access menu and selected the GPS source as "Use Internal GPS." It has been running smooth since then. :fingers-crossed: Hopes this helps.
Hey Guys.
I'm using CM 11 as my daily driver for my i9300 with PA GApps from 23-1. Everything was ok till i updated to 20140202 nightly last night.. i got the screen tearing/API 1.1 issue like most people. Also found the Hardware/capacative keys (Menu and Back) not working. long press works as it should but not with one tap. volume rocker is also affected.
I then did some searching over xda and found some possible solutions. I installed newer GApps from 1-2, but nothing happened. Now I'm on the latest CM11nighlty 20140203, it fixed the screen tearing issue but no luck with the hardware buttons still. can anyone help me with this?
Hint: I wipe Cache and Dalvik every time i install a new nightly.
ahmedrehan said:
Hey Guys.
I'm using CM 11 as my daily driver for my i9300 with PA GApps from 23-1. Everything was ok till i updated to 20140202 nightly last night.. i got the screen tearing/API 1.1 issue like most people. Also found the Hardware/capacative keys (Menu and Back) not working. long press works as it should but not with one tap. volume rocker is also affected.
I then did some searching over xda and found some possible solutions. I installed newer GApps from 1-2, but nothing happened. Now I'm on the latest CM11nighlty 20140203, it fixed the screen tearing issue but no luck with the hardware buttons still. can anyone help me with this?
Hint: I wipe Cache and Dalvik every time i install a new nightly.
Click to expand...
Click to collapse
Its a nightly and filled with bugs. Factory reset and flash a stock rom and work your way up from there. And try to use STABLE versions of roms.
~DemonLord~ said:
Its a nightly and filled with bugs. Factory reset and flash a stock rom and work your way up from there. And try to use STABLE versions of roms.
Click to expand...
Click to collapse
Thanks. Already did a factory reset and a clean install. All's good now
I have just recently tried to install the official cm11 images for my g3. They worked fine. Then, when I installed gel x-posed settings and activated it, I would get said error. It would pop up again and again. This would lead me to reflash my ROM. Then, I do not know what happened, when I would flash a ROM, I would get the error from the start. I eventually fixed this error. But then, when I tried to upgrade the nightly, I got the error again. So I flashed the ROM again, and let it sit. After a little while of perfection, the error came back up!
Here's what I have tried:
-reflashing the boot.IMG (unzipped)
-clearing cache (recovery)
-clearing Sim tool cache/data (said they were non existent when trying)
-reflashing stock, then reflashing cm11
I really want cm11 on my g3, but with these issues, I don't know whether I can now.
Any help would be appreciated!
Sent from my Nexus 7 using XDA Free mobile app
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list: https://itvends.com/gapps/
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
mwest316 said:
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list:
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
Click to expand...
Click to collapse
I did everything exactly as you did, including the 3 wipes, also out of habit. I too however, get the same error with the latest nightly. It starts popping up as I try to add my Gmail account at the initial setup. Previously, the 'unofficial' builds did not do this to me. This is the only rom that does this, I have tried them all out. I have yet to try to flash a different gapps package to see if that makes a difference. Apparently I dont get the data issues with cm12, but get phone issues with cm11.
I'm a bit relieved to see I'm not the only one having this problem. Been updating every night to see if maybe it's fixed, but I still get the same error. Didn't happen on the first nightly I flashed, though. It lol seems to be happening at random for me. Sometimes I'll set my phone down for a couple hours, working perfectly fine. Then I pick it up to check something and I suddenly start getting that error. I've tried every "solution" I find and none of them work for me. Even thought it was an issue with reading my sim card because when I get the error, it shows that my sim card isn't being read. But I still get it when I take it out. A normal factory reset doesn't fix it either. I have to do a complete data format to remove the error.
I found a quick little fix where i make a backup earlier in the day and just restore it whenever I start getting the error, but it's still very annoying.
Same issue
Hey bros,
Same thing here. It's a baseband radio issue. Notice in settings under About Phone it says 'Baseband Version: Unknown'. Either TWRP is flashing over our baseband (not likely, calls and texts can be made before the error message attacks come), or CM11 has some issue on certain builds with reading our SIM cards. I think having an official 10B or 11C flashable baseband radio to install at the time of the ROM install will fix this problem. Waiting on CM to patch the code will take too long. Let me know if you find one of these basebands or can find out how to extract it (from file manager or somewhere?) as I have not been able to find this info on XDA or anywhere.
EDIT: I FIXED IT
I'm a new member, and XDA won't allow me to post links..... look in the OP for JasmineROM (all credit to author for posting this 11C modem and fabulous stock LG debloated ROM) under downloads, you'll find the 11C modem. Download it.
1. Place 11C modem.zip on external or internal, whichever you want. I prefer external.
In TWRP:
2. Backup, unless youre livin' life on the edge.
3. Wipe it all except for external (or internal, if you prefer to flash from your internal storage)
4. Add to Install zip que in order:
a) latest CM11 nightly
b) 11C modem found in JasmineROM OP of main thread
c) GAPPs of your choice (I like nano PA GAPPs, and just install whatever else i want after)
5. FLASH
6. profit
7. PHAP
I have heard the 10B radio works great too. holler back and post results between the 2 stock radios for VS985.
Please hit thanks, as I am new and want to be helpful, where possible. Please share this so others know that we can overcome this nonsense.
CM11!!! Phappin' so hard right now!
Got it again.... totally blowed right now. maybe reconfig APN to match VZW and it will work?
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
8pscott said:
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Are you using that PA GAPPs package that's in alpha? I think i'm going to give up and go to 12 too... I do know that the first official nightly of CM11 doesn't give me any errors, but Trebuchet is so buggy it won't take widgets. Had to download Nova
It makes me cry. My phone lasted through the night. Woke up at around 7 and it was fine. Went back to sleep and woke up at around 8:30 and I was crushed to see the problem happening again. There doesn't seem to actually be anything thy triggers it. :/
Yeah I think I'm gonna just try out cm12 and see how that goes.
Double check to make sure the phone isn't running in art. That fixed my problems! Xposed and art do not work together!![emoji2]
Im getting the same error on my phone usually a few says after using any of the nightlies. When i go to make a phone call it gives me the force close and doesnt stop. Ive since moved back to stock hoping someone had more info on the issue. My phone was not using Art but I did have xposed installed.
Q&A for [ROM][CM12.0] Official CM12.0 for E970
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for E970. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
wkobaint said:
Could this versions working on e975?
Click to expand...
Click to collapse
Nope, but if you choose you model from device list below, it will works.
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Volstagg.The.Valiant said:
So I dirty flashed this over my cm11 and Google play has stopped working. Won't connect at all. Any help is appreciated
Click to expand...
Click to collapse
Did you flash 5.0 gapps?
dandrumheller said:
Did you flash 5.0 gapps?
Click to expand...
Click to collapse
Nope. Could find only old gapps
terribly sorry about the brain fart. whole problem arose because i didnt flash the correct gapps . got the gapps from xda and now its working well. but i am getting a pop up saying that google play services have not been installed on your computer etc...
will this problem go away if i just install the google play services apk?
edit : after flashing the proper gapps, an update from the play store solved everything. Now running smoothly.
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Volstagg.The.Valiant said:
since i updated to cm12,go power master has not been able to turn data off when the screen turns off. this was working flawlessly in kitkat. even the go power master widget is not working. thought there might be a problem with root,so flashed supersu 2.40 from recovery. but still it isnt working. any idea what the problem might be?
Click to expand...
Click to collapse
Has the app been updated to support LP? At times in the past, access for 3rd party apps to stuff like data connection, which requires root, sometimes changes functionality with version upgrades. Don't know if that's the case in this circumstance, but it's something to look into.
Performance drop
Flashed this rom with fulll wipe. Works well, but sometimes performance *drops* happens. It becomes VERY slow, like CPU speed drops down to 128mhz. I had the same problem on cm 11.
Who knows how to fix it?
Looking great and functions great but I am getting terrible battery life due to "miscellaneous" or "Cellular Standby" according to battery stats.
E970
1/15/2015 nightly (problem persists from previous nightly)
Same problem on stock and Solid_GEEB Kernel
PA 5.0 GAPPS
Lucky to get 12 hours of battery under normal use. Any suggestions?
Thanks,
-Nick
Any ideas how to fix my issue with the BT mac address being changed to "00:00:00:00:5A:AD"? I had the wrong address on CM11 also but it was a different incorrect address and I was able to fix it. I've posted details in my thread for fixing the issue on CM11. http://forum.xda-developers.com/showthread.php?t=2759056#post58131969<br/>
Video call issue
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
azatheadfi said:
Video call isn't working in both skype and viber. Skype app is crashing as soon as I turn video on. Viber just doesn't turn on the video transmission. Can please somebody report about this issue to CyanogenMod team. I use video calling really often, so this is kind of issue keeps me away from using official CM12 builds. CM11 builds had this issue too and it hasn't got fixed till now.
Click to expand...
Click to collapse
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
CM Updates
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
alliance1975 said:
Settings - About phone - CyanogenMod updates indicates no new updates found despite new updates posted at http://download.cyanogenmod.org/?device=e970. I switched from unofficial CM12 to official CM12 several updates ago. I'm using the gapps posted here https://s.basketbuild.com/gapps. Is there a setting I need to revise to begin seeing the CM updates on my phone. It's no big deal since I can go to the CM device list and download directly.
Click to expand...
Click to collapse
The 1/27 update was detected and installed. I do not know what if anything i did to make it work.
Shelnutt2 said:
Post a logcat of it happening.
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for late answer. I was too busy to post logcats earlier. I hope issues will get fixed.
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
thunder2132 said:
I installed CM12.0 (1/27 build) but any 5.0 gapps I try fails to flash on the official TWRP 2.8.3.0 for the e970. I've tried bpear, PA, and one other. I can get the ROM to boot, then it gives FC's for every Google App, and the apps are all named by their com. ... name, and say "app not installed" when clicked. I have loaded the zip files over wifi, through adb push, via usb, and through straight download to the device. I've also run them from the external SD and the internal storage.
Is there a different recovery I should be using with this? Will a Nexus 4 recovery work on the e970?
Click to expand...
Click to collapse
I'm using TWRP 2.8.4.0 recovery. I initially installed the CM12 unofficial rom along with this gapps:
https://s.basketbuild.com/gapps
and had no problem. I switched to official CM12 when announced by Shelnutt2 and have made no changes to gapps. Perhaps give that gapps a try.
Audio calls problem
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
arun.rama said:
Hi,
I recently updated my OS from LG's Official 4.1.2 to CM12. Everything seems to be working fine but for making/receiving calls. I am not able to hear or speak over the microphone and speaker outlet unless or until I use a headphones in which case both work properly. Can anyone please help?
Details on my upgrade:
I had backed up my data and downloaded the CM12 zip files with Gapps and SuperUser into my SD card. Once they were ready, I restarted my mobile in Recovery mode and wiped the user data and installed CM12.zip followed by Gapps followed by SuperUser. Then rebooted my mobile and check everything for the working condition. It was working perfectly except for the fact that when I receive phone calls or when I make a phone call once I attend the call, I would not be able to speak to the person or hear the person in normal mode nor in speaker mode. The only way it works is if I use my headphones.
I had installed CM12 01/26/2015 version. And have tried later versions until 01/30 but I do not find that to be fixing. It would be of great help if anyone could help me.
Thanks,
Arun
Click to expand...
Click to collapse
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
azatheadfi said:
Make a clean flash (in TWRP wipe system, data, cache, dalvik cache and after install cm12 and gapps) and install 84/27 hybrid modem during same recovery session, after reboot to system. Modem issues with e970 are really whimsical. I hope this will help.
P.S. Find modem image in this thread:
http://forum.xda-developers.com/showthread.php?t=2584981
Click to expand...
Click to collapse
Hey, I just tried the steps you had mentioned and it worked like a gem. Thanks a lot for your solution. I really appreciate your help. Have a great weekend.
Arun