Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Well, all I can say is to make sure you have a half decent kernel, and make sure you're using the right gapps. No reason it should crash on you.
actually im in the same boat. had to use waze (not bad at all), just wish it works.
Misterblc said:
Everyone,
I have been running the latest CM10 nightlies for a couple days and love it on my EVO. However, I am having consistent issues with the navigation. I am S-OFF running the latest firmware. I have been flashing the latest CM10 nightly, although I have also tried deck's latest version as well. When flashing, I wipe everything in sight, trying both the superwipe zip and manual wiping, but everytime I install CM10 the Google navigation crashes on me and has weird screen artifacts. I have also tried using the GPS Status app to clear my GPS data to no avail. Does anyone have any other tricks to get nav to work on CM10?
Thanks!
Brian
Click to expand...
Click to collapse
I have the same issue. Eventually I was going to get around to trying a different kernel.
I am running the Kernel from the CM10 build:
3.0.53-dc2c1ebb
[email protected] #1
Mon Dec 3 21:32:25 PST 2012
As for the GAPPS I just installed the latest I could find with the ROM and then downloaded the latest Maps from the market.
Any recommendations on a good kernel to try?
This is a widespread issue for unrooted, stock users. It is documented in several forums, so it does not only affect you or other rooted users.
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Naters,
I haven't tried using the IRC build...do you have a link / instructions on how to get that (and the GAPPS). I will try loading up MeanROM, getting a sense lock, and then switching to that build.
Thanks!
Brian
NaterTots said:
I am running CM10 12/05 build from IRC and used my Navigation with G maps for 2 straight hours today with no problems.
I am on the kernel it comes with. Before flashing CM10 I update prl, profile and make sure I have a GPS lock on a Sense rom. Then go into TWRP and wipe cache, dalvick, factory reset, and system a couple times each, flash CM10, I'm using the Captain's Gapps from IRC and it works fine for me.
I've never wiped the GPS data stuff or anything like that either.
YMMV though I guess
Naters
Click to expand...
Click to collapse
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Tried it, some problem unfortunately...I guess this is a YMMV type thing.
BTW, is that IRC channel a good place to get support for CM10? I was hoping to talk with the developers and try to help out with kernel logs or whatever may be useful.
Brian
NaterTots said:
This is the link to get into the IRC channels.
Once you are in the DL link for the rom and Gapps will be at the top of the page.
http://forum.xda-developers.com/showthread.php?t=1643396
Let me know how it works for you.
Naters
Click to expand...
Click to collapse
Sorry it didn't work.
No clue why it works for some and not others.
Sent from my PC36100 using xda app-developers app
Working now
I was having a lot of problems with the navigation until looked in the location access menu and selected the GPS source as "Use Internal GPS." It has been running smooth since then. :fingers-crossed: Hopes this helps.
Related
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
debinnv said:
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
Click to expand...
Click to collapse
What is the status of your Photon currently? Assuming it is rooted and unlocked, running what rom? Please provide info on what rom you are on now, which one you flashed from, and what process you used to get where you are. The more info provided the easier it will be to help.
Well lets see, currently I am back on stock, but here is what I did. I rooted, unlocked, installed CWM 5.0.2.7 I also flashed jokers recoveryv3 ( I follow QB's videos) So then I installed the gummy rom using this process. Format system, format data, format cache, wipe cache then dalvik cache. flash rom, flash rom again ( now I did not reboot into recovery after I flashed the rom the first time) I just went straight to install rom again. flash gapps, fix permissions. Reboot up and good loving it all. Waited 15 min then rebooted again. That's it. So I am at a loss. Thanks for help if you need any other info please let me know.
Oh I am on 2.3.4 with 198_7 also
In your system settings did you have "home only" or "automatic" selected for your roaming settings? For a lot of these roms, "automatic" is forced roam. And then if you didn't have roaming data enabled, that would explain why you were constantly roaming with no data.
Sent from my MB855 using XDA
Thanks so much .
I did have automatic checked but I did have roaming data enabled also. I flipped it around too with home only. I am truly beginning to think my phone is just plain "off " who knows. It's a shame though, I mean not that stock is bad on this phone but the custom roms are so much better imo. This is the first phone I have ever had a problem with. I have been flashing phones for years. Think I started with a HTC Mogul. That was a solid phone LOL
Does CM7 work for you? If it does then I reckon flashing that and setting it up, then instead of doing a full wipe keep your data and flash CM9 based rom over it, fix permissions and take it from there.
I have not tried CM7 but I can, sure can't hurt to try at this point. Thanks, I will give that a try tomorrow.
Have you tried *#*#4636#*#*? Sometimes flashing changes the radio in that menu. Be careful though, changing something can really Bork your phone. It should be on cdma prl I think
sent from my CM7 MoPho
Deb, my photon has never been kind to me with the 'flash twice' method. It always results in no data. Try cm9 again, but this time wipe cache, system, data, and dalvik, install version 3.1 of cm9, boot into it, reboot to recovery, wipe cache and dalv, then install the latest cm9 version. Always works for me. Good luck
Sent from my MB855 using XDA
Morning all, your all are great. Okay so I am ready to start again. I'm at stock right now so I need to get her all set up again. (Yes my phone is a she) Acvice, I am going to try your method first will let you know in a bit.
Looks like joker's site may be down so I need to try and find the 2 cm9 roms
I have this rom saved already on my computer
beta-0.6.9.1-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed.zip
Wonder if I should try that one or just wait
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
debinnv said:
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
Click to expand...
Click to collapse
You don't have to, but I recommend it.
Sent from my MB855 using XDA
I think th3bill has 0.3.1 in his fixes thread
http://www.mediafire.com/?y7no1r460d4o8zf
sent from my CM7 MoPho
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
debinnv said:
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
Click to expand...
Click to collapse
Glad someone provided you with that 3.1 link. Looking forward to see if it works out for ya.
By the way, you will know it worked if when you boot up in 3.1 you have working data. Flashing the newer version after that will essentially just update everything.
Deb, I take it the flash of 0.3.1 didn't work? Did you have data and then lose it when you flashed 0.6.9.3? What were your exact steps. I just rooted/unlocked and flashed my f-in-law's new photon and it worked just fine. Lemme know what you did and maybe I can help more
sent from my CM7 MoPho
Thanks bullfrog that's nice of you but honestly I'm good now As you know.
I didn't even try to install 0.3.1. I kept thinking about it, seeing I had no luck with 2 others previously so I decided to go the MIUI route and I'm a happy camper with that one. I am a flashaholic for sure, as we all are here. I am thinking though, I am gonna just be happy with where I am at for now. Of course I will most likely decide to give another rom a try at some point.
Of course I am already eyeing a few Samsung Epic touch's on ebay. I hear that one can be a brick just waiting to happen....weeeee I am having way too much fun
I'm glad you made it to MIUI. if you ever want to try cm9 or and of the similar ones (aokp, gummy, paranoid) I would suggest flashing that 0.3.1 first, then updating to the latest cm9, then flashing the variant
sent from my CM7 MoPho
I have had nothing but pain and suffering since deciding to install CM 10.2 last night. I installed the latest stable version of CM 10.2.2 as well as the google apps pack and after several wipes (system, cache, data), it finally worked. The issue that I am not having is that it wont connect to the Verizon network.
I think the issue may be that in Mobile Network Settings>CDMA Subscription it is set to NV, and won't let me switch to RUIM/SIM. Another clue is that in the About Phone section, Baseband version is UNKNOWN. Any ideas?
EDIT: Ok, I updated to the latest CM version via the CM update process on the phone. looks like i am now on CM11 and i have network connectivity, though it is 1 bar of 3G. And now the google play store keeps throwing errors so i have to uninstall it.
I thought CM was a polished ROM that I could just install and go. I am now considering going with something else since I still cant get it working right.
killerroomba said:
I have had nothing but pain and suffering since deciding to install CM 10.2 last night. I installed the latest stable version of CM 10.2.2 as well as the google apps pack and after several wipes (system, cache, data), it finally worked. The issue that I am not having is that it wont connect to the Verizon network.
I think the issue may be that in Mobile Network Settings>CDMA Subscription it is set to NV, and won't let me switch to RUIM/SIM. Another clue is that in the About Phone section, Baseband version is UNKNOWN. Any ideas?
EDIT: Ok, I updated to the latest CM version via the CM update process on the phone. looks like i am now on CM11 and i have network connectivity, though it is 1 bar of 3G. And now the google play store keeps throwing errors so i have to uninstall it.
I thought CM was a polished ROM that I could just install and go. I am now considering going with something else since I still cant get it working right.
Click to expand...
Click to collapse
You definitely want to be using CM 11! 10.2 is ancient at this point.
As for your problems. First, Sense based ROMs apparently show more bars for the same signal strength. To know if it is actually worse, you need to compare the numeric (db) signal strength. Second, did you also flash a kk gapps package?
I would recommend downloading the latest gapps-kk-* from http://goo.im/gapps and then in recovery do:
* factory reset
* format /system
* install cm 11 version of your choice (latest nightly or M8)
* install gapps
And see if that makes your life a little better.
Thanks for taking the time to respond. The reason i went with 10.2 is it was the latest "stable" version on CM's website. I wasn't sure what "snapshot" meant so i didnt do any of those. Then i eventually did download and flash the kk gapps but was still having issues.
I am following your steps above to start fresh again, though I was still having issue with the radio before though, so we will see if this helps.
killerroomba said:
Thanks for taking the time to respond. The reason i went with 10.2 is it was the latest "stable" version on CM's website. I wasn't sure what "snapshot" meant so i didnt do any of those. Then i eventually did download and flash the kk gapps but was still having issues.
I am following your steps above to start fresh again, though I was still having issue with the radio before though, so we will see if this helps.
Click to expand...
Click to collapse
Well, everything seemed to install ok and phone booted fine but I have no mobile network. I do have data if i monkey around with the Preferred Network Type setting, but regardless, when i try to make a phone call, it says there is no mobile network. does anyone have the recommended settings for verizon?
I've been having some issues with WiFi connecting using Dirty Unicorns, as well as random reboots. And i know several other people have too, from looking through that thread. I even posted a bug report on their Jira bug tracking system.
The jewel maintainer for DU spoke with another maintainer of the ROM for a different device (who also runs it on a Jewel) and neither one of them is having the same problems, so it seems like it's probably something on my end. The one thing that we noticed was different was the radios.
I ran the RUU to get my new partitions, which updated me to the latest radios. Apparently Mazda (as he's known here) used a different method, And still had older radios. His radio is 1.12.11.1119 and he has not experienced any issues.
I'm on 1.13.11.1105 and get random reboots and occasional inability to attach to my home WiFi until I reboot, after which it immediately connects.
I guess I'm wondering, is it advisable to change radios back to an older version, if it had the possibility of correcting my issues? And if so, how do I do it? And if I do it and it doesn't help, can I easily go back to the most recent radio, or do I have to go through the RUU again?
I don't have any experience flashing radios, so if it's different than just flashing a zip, perhaps a tip on how to do it would also be appropriate.
Thanks for any and all advice, I really would appreciate some feedback.
I have ran into a similar wifi problem on the new build posted today. The wifi wont turn at all on this build v7.8
Anyone have better luck with dirty flashing the ROM over top of DU 7.7? Sometimes that helps.
fizbanrapper said:
Anyone have better luck with dirty flashing the ROM over top of DU 7.7? Sometimes that helps.
Click to expand...
Click to collapse
I'm willing to be a guinea pig. I'll do a nandroid of my current setup and do a dirty Flash. I'll let you know how it goes.
Well, I did it. I dirty flashed and I have Wi-Fi. Now, since I have my backup, I think I'm going to do a clean flash and see what happens.
rck77 said:
I have ran into a similar wifi problem on the new build posted today. The wifi wont turn at all on this build v7.8
Click to expand...
Click to collapse
I just did a clean install of 7.8 and still have Wi-Fi. What did you wipe before installing?
bpaulien said:
I just did a clean install of 7.8 and still have Wi-Fi. What did you wipe before installing?
Click to expand...
Click to collapse
Yup did wiped data and cache. Flashed back to 7/7 build and wifi turns on. Tried to again and got the same result. weird...
rck77 said:
Yup did wiped data and cache. Flashed back to 7/7 build and wifi turns on. Tried to again and got the same result. weird...
Click to expand...
Click to collapse
Try wiping system and data too (like it says in the Dirty Unicorn ROM's OP.) That's what I did. It might make a difference.
Sent from my Nook HD+ with official CM11 on emmc using Tapatalk pro
My WiFi died kind of randomly, so I dirty flashed a custom kernel. WiFi is back now.
no wifi
WiFi stopped working in version 7.8. I wouldn't care so much if Sprint had decent LTE coverage and speeds.
[ROM] Dirty Unicorns 4.4.4 {Jewel} v7.8 & v7.9 [Both New/Old Partition] no wifi
fizbanrapper said:
My WiFi died kind of randomly, so I dirty flashed a custom kernel. WiFi is back now.
Click to expand...
Click to collapse
What kernel are you using? I had been using Bubba, but recently I was reading that WiFi doesn't work at all on it, and since it's no longer being supported, i don't think there's much hope of getting it working again.
I have just recently tried to install the official cm11 images for my g3. They worked fine. Then, when I installed gel x-posed settings and activated it, I would get said error. It would pop up again and again. This would lead me to reflash my ROM. Then, I do not know what happened, when I would flash a ROM, I would get the error from the start. I eventually fixed this error. But then, when I tried to upgrade the nightly, I got the error again. So I flashed the ROM again, and let it sit. After a little while of perfection, the error came back up!
Here's what I have tried:
-reflashing the boot.IMG (unzipped)
-clearing cache (recovery)
-clearing Sim tool cache/data (said they were non existent when trying)
-reflashing stock, then reflashing cm11
I really want cm11 on my g3, but with these issues, I don't know whether I can now.
Any help would be appreciated!
Sent from my Nexus 7 using XDA Free mobile app
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list: https://itvends.com/gapps/
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
mwest316 said:
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list:
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
Click to expand...
Click to collapse
I did everything exactly as you did, including the 3 wipes, also out of habit. I too however, get the same error with the latest nightly. It starts popping up as I try to add my Gmail account at the initial setup. Previously, the 'unofficial' builds did not do this to me. This is the only rom that does this, I have tried them all out. I have yet to try to flash a different gapps package to see if that makes a difference. Apparently I dont get the data issues with cm12, but get phone issues with cm11.
I'm a bit relieved to see I'm not the only one having this problem. Been updating every night to see if maybe it's fixed, but I still get the same error. Didn't happen on the first nightly I flashed, though. It lol seems to be happening at random for me. Sometimes I'll set my phone down for a couple hours, working perfectly fine. Then I pick it up to check something and I suddenly start getting that error. I've tried every "solution" I find and none of them work for me. Even thought it was an issue with reading my sim card because when I get the error, it shows that my sim card isn't being read. But I still get it when I take it out. A normal factory reset doesn't fix it either. I have to do a complete data format to remove the error.
I found a quick little fix where i make a backup earlier in the day and just restore it whenever I start getting the error, but it's still very annoying.
Same issue
Hey bros,
Same thing here. It's a baseband radio issue. Notice in settings under About Phone it says 'Baseband Version: Unknown'. Either TWRP is flashing over our baseband (not likely, calls and texts can be made before the error message attacks come), or CM11 has some issue on certain builds with reading our SIM cards. I think having an official 10B or 11C flashable baseband radio to install at the time of the ROM install will fix this problem. Waiting on CM to patch the code will take too long. Let me know if you find one of these basebands or can find out how to extract it (from file manager or somewhere?) as I have not been able to find this info on XDA or anywhere.
EDIT: I FIXED IT
I'm a new member, and XDA won't allow me to post links..... look in the OP for JasmineROM (all credit to author for posting this 11C modem and fabulous stock LG debloated ROM) under downloads, you'll find the 11C modem. Download it.
1. Place 11C modem.zip on external or internal, whichever you want. I prefer external.
In TWRP:
2. Backup, unless youre livin' life on the edge.
3. Wipe it all except for external (or internal, if you prefer to flash from your internal storage)
4. Add to Install zip que in order:
a) latest CM11 nightly
b) 11C modem found in JasmineROM OP of main thread
c) GAPPs of your choice (I like nano PA GAPPs, and just install whatever else i want after)
5. FLASH
6. profit
7. PHAP
I have heard the 10B radio works great too. holler back and post results between the 2 stock radios for VS985.
Please hit thanks, as I am new and want to be helpful, where possible. Please share this so others know that we can overcome this nonsense.
CM11!!! Phappin' so hard right now!
Got it again.... totally blowed right now. maybe reconfig APN to match VZW and it will work?
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
8pscott said:
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Are you using that PA GAPPs package that's in alpha? I think i'm going to give up and go to 12 too... I do know that the first official nightly of CM11 doesn't give me any errors, but Trebuchet is so buggy it won't take widgets. Had to download Nova
It makes me cry. My phone lasted through the night. Woke up at around 7 and it was fine. Went back to sleep and woke up at around 8:30 and I was crushed to see the problem happening again. There doesn't seem to actually be anything thy triggers it. :/
Yeah I think I'm gonna just try out cm12 and see how that goes.
Double check to make sure the phone isn't running in art. That fixed my problems! Xposed and art do not work together!![emoji2]
Im getting the same error on my phone usually a few says after using any of the nightlies. When i go to make a phone call it gives me the force close and doesnt stop. Ive since moved back to stock hoping someone had more info on the issue. My phone was not using Art but I did have xposed installed.
When signing in my google account, I get the error Problem communicating with google server. try again later.
Device LG G3 VS985
Rooted
Newest nightly of cm13
Tried different versions of opengapps
Tried installing google apps from apk mirror
Hosts looks normal
2 step disabled
Cleared cache for google apk's
Disabled and reenabled apps
Fully wiped and reinstalled Cm and Gapps
Cleared davlik and cache
History:
This all worked on a previous phone same model. replaced original device due to a 3000lb crushing incident.
This device, tot back, rooted, TWRP installed, 35b installed, flashed 47a rooted stock version.
Everything works.
Wipe system and install cm as I have done on previous device, and here I am.
I'm missing something but cant figure out what it is.
I have read through forum after forum and tried everyones so called fix but nothing works.
I even flashed my old backup from my previous device but had issues with updating gapps due to being older.
I've learned alot from you guys but this has me baffled.
FWIW I'm running into the EXACT same issue on AOSP/cm13 based roms. I've tried Dirty Unicorn, PAC alpha, and ParanoidAndroid all with the same issue. The official cm13 gets through connecting to googles servers, but I have sms issues on that.
I'm really not sure what could be causing it, as I've been searching the same as you and tried all of the posted "solutions" by other users. Also, it seems that most people are running into this error after they enter their username and password, but for me it won't even get that far.
If you find a solution PLEASE let me know, I had to revert to using stock 47a debloated, and I hate the LG skin.
inexplicability said:
FWIW I'm running into the EXACT same issue on AOSP/cm13 based roms. I've tried Dirty Unicorn, PAC alpha, and ParanoidAndroid all with the same issue. The official cm13 gets through connecting to googles servers, but I have sms issues on that.
I'm really not sure what could be causing it, as I've been searching the same as you and tried all of the posted "solutions" by other users. Also, it seems that most people are running into this error after they enter their username and password, but for me it won't even get that far.
If you find a solution PLEASE let me know, I had to revert to using stock 47a debloated, and I hate the LG skin.
Click to expand...
Click to collapse
I'm still looking. I will let you know if I find a solution. I'm surprised that with all the smart people on this site, that no one has an idea or such to help us work toward a solution.
thebigindian said:
I'm still looking. I will let you know if I find a solution. I'm surprised that with all the smart people on this site, that no one has an idea or such to help us work toward a solution.
Click to expand...
Click to collapse
On some roms it does go through for me (aospb, beanstalk), but then outgoing sms fails. I think it may be my device honestly...
Ok, got cm 12.1 to work with open gapps super. I'm able to setup gmail accounts and such. Did a full wipe. Used a clean SD card with only the files needed to flash.
Gonna try upgrading to cm13.
inexplicability said:
FWIW I'm running into the EXACT same issue on AOSP/cm13 based roms. I've tried Dirty Unicorn, PAC alpha, and ParanoidAndroid all with the same issue. The official cm13 gets through connecting to googles servers, but I have sms issues on that.
I'm really not sure what could be causing it, as I've been searching the same as you and tried all of the posted "solutions" by other users. Also, it seems that most people are running into this error after they enter their username and password, but for me it won't even get that far.
If you find a solution PLEASE let me know, I had to revert to using stock 47a debloated, and I hate the LG skin.
Click to expand...
Click to collapse
Got it working. The route I took was using a clean sdcard with only cm12 snapshot and your choice of open gapps. Wipe internal everything and flash the 2 files on the sdcard. Reboot. After all is said and done, grab the current cm13 nightly and matching gapps package and dirty flash both. from a clean sdcard. This worked for me. Good luck.