I tried to install CM 7 on my Samsung vibrant, but it bootlooped and is now stuck on "samsung vibrant" screen. If I plug it in after pulling the battery to turn it off it never shows the battery screen, just a loading symbol. Can give more info, just not now.
Thanks
-Adam
Boot back into recovery and reflash CM7 again. This is normal for it to bootloop on install b/c of the CWR mismatch.
Froyo Bootloaders-> Volu +/- and Power, See Vibrant, release power
Gingerbread Bootloaders -> Volu- and Power
vol- and pwr got me to download mode, but I can't get Odin to work right. How do I get to recovery?
EDIT: I think my computer and phone are not communicating, because neither Odin, Heimdall or OCUB are even registering its connection, although my computer tries to install drivers every time I plug it in.
Sounds rudimentary and I am sorry for saying it but this has worked for many a user.
Try a different USB port or cable. Seen it happen quite a few times where they switch ports and everything works just fine.
If you can get into download mode then you should be able to get Odin working eventually.
Okay.
After some messing with Odin, my phone is still not working. OneClickUnBrick is failing, thinks that I don't have Heimdall installed. Do you have a tar that you know is good?
Go to the Dev section and download the AIO Toolbox. It has Odin 1.8, all the drivers, the pit/tar files to get you back to 2.1 then to CM again. Links in toolbox are live again. Don't forget to download the .net files to.
Once you're back on stock and everything is running good again you may want to follow this guide...
http://forum.xda-developers.com/showthread.php?t=1307637
...Although it says it's for Miui, it's the same steps for CM7. It'll take you step-by-step through the installation process.
Sent from my SGH-T959 (Samsung Vibrant)
Thanks guys. The AIO Toolbox has not installed yet but it looks promising. I will edit when it finishes.
Also, has Cyanogen made a stable ICS Rom?
It worked, thanks guys! this would have taken way longer -- and maybe never worked -- if no one had stopped to help a noob.
-Adam
Related
So, I just got my phone back from Samsung for this issue. Start my newly returned phone up, it's running 2.2. I turn it off, hold volume buttons and plug in my USB cable - I get download mode instantly. I start up Odin 1.7, select the files and click start.
Nothing happens. Hangs up SetupConnection. I unplug the battery, then the USB cable, plug everything back in and I'm back at square one with this ****ing screen.
Last time I tried every single ****ing button combination posted on this website. I know my phone isn't hardware locked because I've never had a problem getting in to Download Mode before. Hell, I'd never had a problem with Odin not working properly before. What the hell is wrong? I have all the proper drivers installed. Why is this happening?
Now, Odin still sees my phone when I plug it in. If I click Start, sometimes it hangs on SetupConnection, sometimes it hangs on Initialization. I've read that you should still be able to flash while on this screen? Is this true? Either way, I think I'm ****ed again. Any help?
Also, I've read that maybe a jig will help get me in to download mode? Where can I buy a jig from?
you can go to stock jfd from that screen, it acts like download mode.
Once on jfd, download mode will work fine.
try the files in my going back to stock... also make sure to remove any other usb components (they can cause odin to hang).
I love you.
Something must be wrong with the files on my desktop, or perhaps the other USB cable I'm using is ****ed.
This is a bit embarrassing. For some reason I can't get root. I can get in to recovery and select reinstall packages, but every time it boots right back in to the OS. Any hints? Never had this issue before.
EDIT: So it looks like I have Superuser installed but since I can't get into Clockwork I can't flash any roms. What's going on? I can't find any other links where people couldn't get in to Clockwork.
EDIT2: Well, I installed ROM Manager and used it to "flash" CWM. Reinstall Packages worked this time it seems. Weird. Anyway, thanks for the help!
Cool, glad you were able to get it all sorted.
ok first post so i wont waste any time getting to my problem, how I caused it and what i have tryed to fix it.
i have a vibrant running 2.2, last night i tryed to root using aio toolbox not knowing it only worked for 2.1(my mistake).. so heres what happened it boot my phone into download mode and from there i tryed to install packages only to get a error about signature so i reboot my phone and tryed to use odin to downgrade only to realize that somehow i screwed up my phones ability to connect to pc, it charges but does not go in debugging massstorage etc, so from there i went back into download mode and tryed to reinstall packages only to get error about missing update.zip, i dont have superuser and dont know how to get the update.zip back without usbmode or superuser. ive tryed everything else, it will detect my wifes vibrant but not mine. i know its my phone not the pc/usb/drivers etc etc PLEASE HELP NEWBERT
just keep trying odin to get back to 2.1
my usb's dodgy aswell, charges and takes like an hour or 2 before it actually comes up on computer and phone saying its connected
i messed up mine the other day and it took me like 2 hours of trying to get it to connect to odin going through all 4 of my usb ports like 10 times each but it eventually did it so just keep trying
try different ways:
pull battery out and connect usb and open odin
hold vol up and down and push battery back in and it should go to download mode
or
leave battery in, open odin hold vol up and down and plug usb in and that should go to download mode
mine only works with the 2nd way for some reason, the 1st way seems to work for most people though
ive tryed this it will go into download mode but odin wont detect it, i think its something with my drivers on my phone. im completely new to this but i know it worked flawlessly untill i tryed to root, im not sure what went wrong besides i used aio toolbox intended for 2.1 on 2.2
Odd. I have never used the AIO Toolbox, never felt the need to, but yes, if you are able to get into download mode, but ODIN is not recognizing, it does sound like a driver issue.
You may want to uninstall/reinstall (here are the drivers, be sure to note the 32/64 tabs) LINK
Also, make sure you have the latest ODIN (check my going back to stock guide)
You might also want to make sure the pit/tar you have for JFD are good by checking the md5, I use hashtab to do this. (I realize you are not at that point yet).
Try rebooting your PC, pulling your battery and waiting a bit... trying different USB ports, be sure to remove other USB devices too before rebooting your PC (my ODIN will NEVER work with my webcam hooked up).
If that does not work, wonder if other drivers would help...
+1 follow above
- So the phone won't boot completely? That sux!
- If it did you could bluetooth the update.zip from her phone to urs.
.....but.......
- It automatically boots into recovery?thats odd
***How are you getting into Download mode?(the yellow triangle with android dude shoveling) Button combo maybe?
I flashed Trigger onto my Vibrant, all seemed well. ROM Manager was FCing, so I reinstalled from market, installed recovery from within ROM Manager, rebooted, went into the regular android recovery. Rebooted again, now it doesn't want to boot. Just loops at the Samsung Galaxy logo (after the vibrant, the little "movie" that plays after the Vibrant logo)
Stubborn bastard won't go into download mode, COM9 shows up in Odin, but it keeps looping the intro thing. If I try to flash, Odin just says SetupConnection and stays there.
Will a JIG do anything at this point?
I will admit, I got too eager and may have flashed a gingerbread ROM on top of a froyo bootloader. >.> I admit, that was stupid, but now all I want is to get the damn thing back into download mode...
It's not bricked. Probably just in a boot loop. Just need to play around and get into download mode.
speedy11131 said:
I will admit, I got too eager and may have flashed a gingerbread ROM on top of a froyo bootloader. >.> I admit, that was stupid, but now all I want is to get the damn thing back into download mode...
Click to expand...
Click to collapse
that doesnt make a difference, i've been on simply honey like 2 month on froyo bootloaders and works fine apart from rainbow on boot and not being able to see recovery
speedy11131 said:
I flashed Trigger onto my Vibrant, all seemed well. ROM Manager was FCing, so I reinstalled from market, installed recovery from within ROM Manager, rebooted, went into the regular android recovery. Rebooted again, now it doesn't want to boot. Just loops at the Samsung Galaxy logo (after the vibrant, the little "movie" that plays after the Vibrant logo)
Stubborn bastard won't go into download mode, COM9 shows up in Odin, but it keeps looping the intro thing. If I try to flash, Odin just says SetupConnection and stays there.
Will a JIG do anything at this point?
I will admit, I got too eager and may have flashed a gingerbread ROM on top of a froyo bootloader. >.> I admit, that was stupid, but now all I want is to get the damn thing back into download mode...
Click to expand...
Click to collapse
That happened to me before, I used and tried a different cable and got into download mode with functioning odin. Also, try removing battery, then put the battery back in. then with pressing volume up and down with power switch plug in usb. Hope this helps. Vibrant is hard to brick.
Sent from my GT-I9000 using xda premium
It is not dead yet, follow the steps as follow thread to go back in beginning and flash rom you want again.
http://forum.xda-developers.com/showthread.php?t=734475
Depending on which version of ODIN you are using the sequence works best like this:
1) Get the phone into a download acceptable mode with use of a usb cable (JIG is most appropriate)
2) Have ODIN running BEFORE connecting the phone
3) Now connect your phone and attempt the flash. Version prior to 1.7 were extremely picky with following this sequence. As of 1.7 POST ODIN seems to not bug so much the sequence of when the phone was plugged in.
Report back with your results...
speedy11131 said:
I flashed Trigger onto my Vibrant, all seemed well. ROM Manager was FCing, so I reinstalled from market, installed recovery from within ROM Manager, rebooted, went into the regular android recovery. Rebooted again, now it doesn't want to boot. Just loops at the Samsung Galaxy logo (after the vibrant, the little "movie" that plays after the Vibrant logo)
Stubborn bastard won't go into download mode, COM9 shows up in Odin, but it keeps looping the intro thing. If I try to flash, Odin just says SetupConnection and stays there.
Will a JIG do anything at this point?
I will admit, I got too eager and may have flashed a gingerbread ROM on top of a froyo bootloader. >.> I admit, that was stupid, but now all I want is to get the damn thing back into download mode...
Click to expand...
Click to collapse
1) take your battery out
2) plug your phone a laptop/desktop
3) hold volume up and volume down + put the battery in
...should be in download mode...I am assuming u have a froyo bootloader...
If that don't work then on step three instead of holding both volume buttons only hold volume up..that works for GB bootloader...
I was in the process of flashing back to GB in ODIN when it froze on flashing the Modem. Now the phone does nothing. Black screen. Plug USB in and computer doesn't know its there, Download mode will not work, nothing works.
Will a usb jig get it back into download mode so I can try flashing again or is this thing straight gone?
Thanks.
Yes, a USB jig will work.
MultipleMonomials said:
Yes, a USB jig will work.
Click to expand...
Click to collapse
Well I built one and tried it... No go. Nothing happened. Blank screen.
BTW the battery was fully charged right before it bricked so I know the battery isnt dead.
Was the phone on when you plugged it in?
I fixed it. Had to do the Unbrickable Mod. Was a pain in the butt getting the contact pads jumped. Once I got it I was able to get into download mode with the supplied programs and flash back to stock.
Nicely done.
Well I jinxed myself. I went to flash a new ROM and now im stuck on the Samsung Logo. Using the previous method does no good. Just stuck on Sammy logo. I found a different Heimdall One-Click now but it fails to flash Modem and now it vibrates 3 times when the sammy logo is shown.. over and over... so its in a boot loop I take it? If I 3 finger it it shows the stock recovery but I am unable to move up or down in recovery. It just stays on the reboot device selection.. im able to select that with the menu softkey thats it. The vol up and down and power buttons do not respond in recover. Updating the Modem is what started this whole mess for me. When I originally was flashing this the other day ODIN froze on flashing Modem, that put me in a hard brick state requiring me to do the Unbrickable Mod. I got it out of that with ED05 Heimdall Once-Click but since then I have not been able to get it out of this soft brick. My galaxy just wont let me win. :-(
Have you tried using One-Click Resurrector?
MultipleMonomials said:
Have you tried using One-Click Resurrector?
Click to expand...
Click to collapse
Ya, thats how I get it into Download Mode... its the Only way I can get it into download mode actually.
Both Odin and Heimdall are having trouble flashing the phone in windows. Both recognize the phone and connect but will not flash anything. They just sit at uploading PIT/Setting Partitions.
The ED05 Heimdall One-Click in linux flashes the phone with success's accross the board but the phone just sits there on the samsung logo... no vibrating, no recovery, and unable to charge the battery. If I use the EH03 Heimdall One-Click in linux it will flash all the way til it gets to flashing Modem but then fails and the phone is stuck in bootloop on the samsung logo vibrating 3 times over and over. It can also get into the stock recovery but im unable to move up or down the menu. Volume buttons have no effect. The phone will now charge though. Full battery as of right now.
I tried using Odin and Heimdall on another windows computer and they will not move past setting Partitons/uploading PIT either. SO I know there isnt a conflict with my computer.
I would like to try a manual flash in Heimdall Front-End in linux but I have no clue how to install it in Linux. I hate that command line stuff. I guess I have to figure it out though if Im going to try it.
OK, success!
I am now back to stock. I was able to run Heimdall in linux and flash CWM recovery. I was able to get into the recovery and make selections in recovery with the volume buttons. I selected reboot in download. I went to Odin and tried flashing a stock EH03 rom and it worked.... I think the reason I couldnt do that before was because i was holding the power button down to keep it in download mode since that is what is required when in download mode via the unbrickable mod.
The windows based programs must not have liked me holding that power button. Weird. Anyways its working.. now on to getting this thing updated.
im having a similar issue, i can get into cwm, can use download, but when i try using Odin for the stock eh03 it instantly says all threads completed succeeded 0 failed 0. when i reboot in cwm it just takes me to samsung logo wont go any further
Try heimdall.
Ya Heimdall in linux will surely give you a win.
Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
jpasher said:
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
Click to expand...
Click to collapse
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Epications said:
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Click to expand...
Click to collapse
Many usb cables will work just fine. The original cables are known to be of good quality. Odin3 v1.85 is recommended for this phone, although any version of Odin should work.
Did you open Odin on the desktop before putting the phone into download mode? Sometimes the problem is as simple as wrong sequence.
If you have a USB jig, use that to put the phone into download mode. Then connect it to the computer while Odin is open on the desktop.
Make sure you have the correct driver installed. You should have "SAMSUNG USB driver for mobile phones" in your add/remove programs dialog in windows. If not, install it. If so, uninstall it, reboot, reinstall it.
Try different cables, different usb ports, even different pc's.
I'll try not to butt in too much, since creepyncrawly obviously has a lot of experience.
(at this point, I'm assuming you're on Windows)
Like he said, it's sounds like it's most likely a driver issue. When you first plugged in the phone, did you get a Windows balloon notification saying "Installing drivers"? If you open up device manager, do you have any devices with an exclamation point next to them, indicate a device that failed to start? If so, make sure the Samsung drivers are installed.
A USB jig is definitely nice to have handy. I use this one (as long as you can wait a few weeks on shipping). If you can get into download mode, your bootloaders are probably safe (meaning you should be able to recover easily).
I actually installed that CM11 ROM yesterday on my SGH-I777 (I can't say anything specific about your model and how it may differ, but it seems to basically be the same phone as the I777). I was running stock non-rooted JB 4.1 with stock recovery, so I had to take a little more of a convoluted route to get there.
In the end, here's the thread for you. Once you can get ODIN download mode working again, you should be well on your way to fixing it (flash CWM 6.0.4.5 from ODIN, boot into recovery, then try the ROM install again).
Well, I've tried flashing CWM again using Odin. While I actually can USE Odin this time, it just isn't working... My phone still only turns on and goes blank after the Galaxy S II screen.
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Hi - I don't know if it is a completely outdated method, but this worked on my father's SII skyrocket yesterday when I was encountering a similar softbrick issue:
Get zadig (http://zadig.akeo.ie/), start zadig, get the phone in download mode, hit Options -> List All Devices, select the Samsung or similar device from the dropdown and replace the default USB driver.
Then use heimdall (http://forum.xda-developers.com/showthread.php?t=755265) to flash in a replacement recovery.
Double check that your phone is detected in download mode: heimdall detect
Then flash the recovery: heimdall flash --RECOVERY recovery.img (try CWM for your phone version)
(some places will have you add --no-reboot. that didn't work for me. let it auto reboot)
After it powers down, quickly disconnect the USB cable and put your fingers on the +/- buttons to get into recovery mode. From there push over whichever ROM via adb, etc. etc.
jpasher said:
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Click to expand...
Click to collapse
It says Odin is successful, but still nothing happens. And I cannot get into recovery no matter how many times I try.
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Epications said:
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Click to expand...
Click to collapse
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
SteveMurphy said:
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
Click to expand...
Click to collapse
I'm having difficulties booting into recovery.
Epications said:
I'm having difficulties booting into recovery.
Click to expand...
Click to collapse
If you have the stock boot animation you should have recovery. Take the battery out, then put it back in and hold power+volume +/- until you get recovery. I have sometimes had to do this extra step after restoring stock.
Make sure your phone isn't plugged in while you're trying this, btw.
grand quattro CWM TRAPPED
Epications said:
Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
Click to expand...
Click to collapse
HI BROOOO I M A GRAND QUATTRO USER EVERYTIME I SWITCH ON MY CELL MY CELL DIRECTLY GOES IN CWM MOD M WORRIED ALOT HELPPPPPPPPPPP ME