Related
Hello Folks,
Just bought myself a samsung galaxy S2 and swapped my AT&T SIM into the new phone. The phone seems to be working just fine but there is no internet connectivity through the 3G network. It doesn't even show that there is a 3G connection. I've tried to go into the settings and have played around but to no avail. Could someone please help or point me in the right direction? Would be a shame to spend 600$ for a phone that only works for voice calling and wifi.
Much appreciated
Harry
I'm having the same problem. Signed up for AT&T since the international version doesn't work with Simple Mobile, have a 2GB dataplan for smart phones and 400 minutes. A friends AT&T sim with an unlimited data plan works fine no problem. Went to the AT&T store and had them test the phone with one of their sim's and it worked... Have to go back to the store on Monday and try and get someone further up the chain to take a look at this.
If you have the Inter model, you will need a 4G data plan... apparently you can swap it. Make sure they set you up in their system under the 4G plan, the price remains the same.
Edit: Have them check your SIM card also, to be safe is compatible with the 4G network.
At Bell, it costs $5 to replace your SIM card. My old SIM worked out of the box with the new phone.
and verify your apn settings. They will vary depending what data plan you are on.
The APN settings are set as the default. WAP.cingular APN gets an unhighlited H+ for a second then it drops to 3G with no connection up or down then it drops off. I'm going to use the ADB log to get more info.
Raised a case with AT&T after verifying everything twice, the latest they'll get back to me is Wednesday.
Ok, so finally got Data working. The AT&T representative, when I first signed up in store, didn't put an IMEI of an AT&T phone in the system so regardless of whether or not I had the correct smart phone data plan, the system wouldn't allow me to properly connect to the data network. So after fussing about the SIM card at the store, the AT&T rep put in an IMEI of an AT&T 4G phone in and then it connected.
Although now that i've found out that H2O wireless has an unlimited $60 plan and is an MVNO that piggy backs on AT&T, i'm tempted to sign up with them. I just need to find out if they support HSPA+ and conditional call forwarding.
I as well has the problem with my S2 not getting a data connection. I did everything that I could think of, but just wasn't getting any connection.
My wife has a Atrix (motorola) and she has the HSPA+ and 3g, so I swapped the SIMs and then my phone was getting the same connection speeds.
I went to the AT&T store and they did give me a new sim (one that said is used for the 4g) , but still nothing.. I told the rep at the counter about me swapping my wife' sim and that happened and she looked at her phone, noticed some setting and basically did a copy and paste and now I got the same speeds.
So, if anyone has any light to shed on what might have been updated.. I sure would like to know.. just in case our account gets changed or updated...
I don't recommend the new unl H2O data plan b/c I had a bad experience with them, their data speed its just too slow. Its like the lowest 3G speed of like 180kbps down and lime 86kbps up.
Using at&t non-smartphone plan I get like 7.5Mbps down and 2Mbps up for $10/mo. (big, big difference), AT&T is the way to go on the GSII.
Sent from my GT-I9100
A little off subject, will the S2 get 4G? I get the HSPA+ , but the AT&T rep said that it would not get the AT&T 4g
hey guys,
i have this exact problem. I am on a family plan and my phone number has an unlimited $15/mo data plan. I have a sim card from 2002, and it works fine with my dumb phone.
My sony ericsson C905A shows an "H" symbol as well as 3g and i can get the internet/data on it. however, on my international galaxy s2 , all i get is edge and i have no indication of either 3g or H+.
how would i be able to switch to the "4g" plan? what would i need to do when i go to the AT&T store?
4G from AT&T is HSPA+ I'm on AT&T and after some account hiccups now have 4G
Sent from my GT-I9100 using XDA App
okay... I need to do a speed test, but there is that new 4LTE (or something like that) isn't that the 'true' 4G?
There's HSPA+, which gives "4G"-esque speeds. I've gotten as high as 7 Mbps on it on my EU version phone running KE7. Currently available SGS2's don't support LTE; Samsung has announced a LTE version, but it is, as far as I know, not available just yet.
My understanding is that the AT&T version, due out next weekend, will NOT be LTE-capable.
The LTE version has only just come out in Korea, my guess is the US market may see it on the Verizon network first.
I'll be spending some time in the US and got the $50 AT&T unlimited GoPhone plan. Everything looks fine except my data speeds are too low. I get 500 kbps, while the signal says H+. (Btw I had to call them to put my IMEI in their database so that the data is enabled). In Serbia I'd get 4-5 Mbps with H+, sometimes higher. What's the deal?
I found the same thing with the Rogers/Fido network in Vancouver. Galaxy S II only gets 3 Mbps where as on the Bell network it had over 8 Mbps.
If you don't have an agreement with AT&T are there any other networks you can try that may offer better speeds in your area?
Sent from my GT-I9100 using Tapatalk
The Goplan has a data speed cap, that's why it's so cheap.
I wouldn't call $50 a month cheap... but anyway, is there any way around it?
Deusdies said:
I wouldn't call $50 a month cheap... but anyway, is there any way around it?
Click to expand...
Click to collapse
You'd have to switch to a post paid plan instead of prepaid.
Except there's a 2 year contract requirement and I'm only going to be here by the end of december.
If you read the fine print the $50 unlimited is only for non-smart phones. The sgii will not work, you will have to add a data plan to use the internet. I'm kind if in the same boat (I'm on a gophone plan), I can no longer send mms without enabling data. They ran a sweep and found out which phone I was using. The sgii is not supported on the network, or so I was told because it is a 4g phone. So I'm back to the inspire.
Does anyone know of any fix for the HSPA+ SGSII I9100 throttle problem?
Is anyone even working on a throttle removal process for this phone?
When I originally got my phone I was using the wap.Cingular APN and was actually getting pretty fast speeds. I then went into the AT&T store and switched my unlimited 3G to unlimited 4G and it seems that the speeds have sort of crapped out. If throttling is the issue I would love a fix. Hopefully someone that may have more information than me can enlighten us
Sent from my GT-P7510 using xda premium
privatewarrior1 said:
Does anyone know of any fix for the HSPA+ SGSII I9100 throttle problem?
Is anyone even working on a throttle removal process for this phone?
Click to expand...
Click to collapse
Throttling is done on the network gateway. To get around speed throttling, you have to be on the right data plan (4G of some kind), and you have to be connecting to the right gateway. The wap.cingular APN is throttled. 4G phones have a different APN. I think that APN is just "phone". There are a bunch of threads that already exist on this subject, just search for them.
spdapimp217 said:
When I originally got my phone I was using the wap.Cingular APN and was actually getting pretty fast speeds. I then went into the AT&T store and switched my unlimited 3G to unlimited 4G and it seems that the speeds have sort of crapped out. If throttling is the issue I would love a fix. Hopefully someone that may have more information than me can enlighten us
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
As I said above, if you changed your plan from 3g to 4g, you will probably have to update your APN to point to the correct gateway. wap.cingular will only get you the lower end of HSPA+ speeds. You want the "phone" APN. Search is your friend.
Trust me Bro. I searched like crazy. The fix seems to be for LTE phones.
I got the international SGII about a month ago. It's only HSPA+. One week after I bought it they came out with the lte version on att. what a bummer.
It seems all the threads online are about lte phones, switching the APN back to HSPA+. I tried some of those fixes to no avail. still throttled at .13 mb. I'm only 8 days into my billing cycle and this is unacceptable as one can't even open a website. it seems the ping speed has quadrupled.
I'm due for an upgrade and my contract would end in few days. I was wondering if there exists a fix for this on an HSPA+ phone or should I just go and upgrade to skyrocket. There's no way I can go on with .13 for the rest of the month.
If anyone knows of a fix on HSPA+ phones that would be great.
BTW, when I bought the phone, I called att and tried to add the new phone imei it came out as a Blackberry. I told them to add the 4g plan but I really don't know if they did it. The lady was like you should have a blackberry plan. So I told her to just keep my iphone data plan unchanged.
My phone then on it's own was pulling HSPA+ speeds up to 7mb/s so I didn't care.
Do you think I should call back and make sure I have a 4G plan added?
privatewarrior1 said:
Trust me Bro. I searched like crazy. The fix seems to be for LTE phones.
I got the international SGII about a month ago. It's only HSPA+. One week after I bought it they came out with the lte version on att. what a bummer.
It seems all the threads online are about lte phones, switching the APN back to HSPA+. I tried some of those fixes to no avail. still throttled at .13 mb. I'm only 8 days into my billing cycle and this is unacceptable as one can't even open a website. it seems the ping speed has quadrupled.
I'm due for an upgrade and my contract would end in few days. I was wondering if there exists a fix for this on an HSPA+ phone or should I just go and upgrade to skyrocket. There's no way I can go on with .13 for the rest of the month.
If anyone knows of a fix on HSPA+ phones that would be great.
Click to expand...
Click to collapse
I also have the unlocked international Galaxy SII. I am on the unlimited data plan for non-smartphones, using the wap.cingular APN. I'm averaging around 3.5-4 mbps down. Fastest I've seen is about 6.5mbps. This is fast enough for me; I would prefer getting unlimited data for the price I'm paying anyways, rather than pay twice as much as I do now only to be capped at 2gb per month.
Maybe you flashed a different modem to your phone without knowing it. What is your setup? Custom ROM? etc?
---------- Post added at 04:11 PM ---------- Previous post was at 04:03 PM ----------
privatewarrior1 said:
BTW, when I bought the phone, I called att and tried to add the new phone imei it came out as a Blackberry. I told them to add the 4g plan but I really don't know if they did it. The lady was like you should have a blackberry plan. So I told her to just keep my iphone data plan unchanged.
My phone then on it's own was pulling HSPA+ speeds up to 7mb/s so I didn't care.
Do you think I should call back and make sure I have a 4G plan added?
Click to expand...
Click to collapse
You can check your account online. If you log in, and go to myAT&T > Wireless > Usage & Recent Activity, under Data it will list your data - If yours contains a string that looks like HSPDDB, it is 4G unlimited. If it only contains DPPB, it is 3G unlimited. Mine (for the unlimited data for non-smartphones) says GPRS WAP UNLTD DOM - DTAU.
EDIT: you said above it was pulling HSPA+ speeds up to 7mbps... what changed? Did you flash a custom ROM? New kernel? New modem? I find it very weird that your speeds would suddenly drop from 7mpbs to 0.13mbps for no reason.
Using the phone APN and a 4G plan will get you the fastest speeds. Back when I was on a 3G plan, I could only rarely connect to the phone APN, and could get only about 7 Mbps top speed. When I switched to a 4G plan, I found I could consistently connect to the phone APN, and my top speed went up to about 9.5 Mbps.
Note that speeds on either APN are highly variable; I can get 9 Mbps one time, then only 1-2 Mbps a couple minutes later.
ctomgee said:
EDIT: you said above it was pulling HSPA+ speeds up to 7mbps... what changed? Did you flash a custom ROM? New kernel? New modem? I find it very weird that your speeds would suddenly drop from 7mpbs to 0.13mbps for no reason.
Click to expand...
Click to collapse
Allegedly, I am in the top 5% data users at only 3.1 GB.
privatewarrior1 said:
Allegedly, I am in the top 5% data users at only 3.1 GB.
Click to expand...
Click to collapse
Oh, I see. You're getting throttled because you've used tons of data this cycle. So it sounds like you are not on an unlimited plan, but a capped plan. If you're supposed to be on an unlimited plan, I would call them up and fight tooth and nail to get it back.
But seriously, I'm on an unlimited plan, but I don't use nearly that much data (3.1 GB!!!) in 8 days. Heck, I hardly ever go over 2 GB in one entire billing cycle.
The only thing I can recommend is for you to hook up to Wi-Fi as much as possible. I have Wi-Fi at home and work, so when I am there, it is not consuming my data plan allowance. Besides, Wi-Fi will end up with a more consistent speed (usually faster). HSPA+ tends to vary wildly in download speeds. In addition to that, Wi-Fi tends to consume less battery. There are a lot of reasons to use Wi-Fi if it is available instead of HSPA+.
Take it as you will, that's just my advice.
my SG2 is not flashed. still on custom samsung ROM.
ctomgee said:
Oh, I see. You're getting throttled because you've used tons of data this cycle. So it sounds like you are not on an unlimited plan, but a capped plan. If you're supposed to be on an unlimited plan, I would call them up and fight tooth and nail to get it back.
But seriously, I'm on an unlimited plan, but I don't use nearly that much data (3.1 GB!!!) in 8 days. Heck, I hardly ever go over 2 GB in one entire billing cycle.
The only thing I can recommend is for you to hook up to Wi-Fi as much as possible. I have Wi-Fi at home and work, so when I am there, it is not consuming my data plan allowance. Besides, Wi-Fi will end up with a more consistent speed (usually faster). HSPA+ tends to vary wildly in download speeds. In addition to that, Wi-Fi tends to consume less battery. There are a lot of reasons to use Wi-Fi if it is available instead of HSPA+.
Take it as you will, that's just my advice.
Click to expand...
Click to collapse
I understand. I've been using my phone because I've been traveling and sometimes wifi is not an option. I use data a lot for my work. I do have a grandfathered unlimited.
I just got my wife the GSII Skyrocket on AT&T and her phone is getting much faster data than mine. She is averaging around 1 mbps faster download speeds but the real killer is her ping, which is consistently between 50-69 ms. Mine never goes below 100 ms. I am on the 4G plan and I am using the phone APN. Her phone has a different apn ("pta" instead of "phone"). I tried the pta apn but it wouldn't connect to data so maybe that is somehow reserved for phones with an LTE sim card? I'm really not sure but I want that faster speed. Any idea what is causing her to get better speeds? FYI before anyone asks we are NOT in an LTE area so both phones were on HSPA+ during my tests.
EDIT: I just tried again and her download speeds are double mine (mine was 3 she was over 6). I expect the AT&T phone to be slightly more optimized for their network but this is ridiculous. Something has to be wrong it can't be this much of a difference.
I'm currently using Simple Mobile with $ 40 3G plan and my maximum 3G speed is 100 kbs. I know Simple Mobile is dependent on T-mobile's 3G tower but it seems Simple Mobile is slow for me.
I plan to switch to $ 50 data plan of T-mobile.
T-mobile users, what are the current maximum and minimum 3G speed of T-mobile ?
Depending on where you are, it should be a hell of a lot more than 100 kbps. T-Mo's HSPA+ areas theoretically can go up to 42 Mbps. My last few speedtests on the Vibrant (KB5 modem) in Mbps:
5.48 down 1.33 up
5.42 down 1.61 up
6.18 down, .41 up
3.98 down, .66 up
5.09 down, .38 up
3.90 down, 1.30 up
mrsbelpit said:
Depending on where you are, it should be a hell of a lot more than 100 kbps. T-Mo's HSPA+ areas theoretically can go up to 42 Mbps. My last few speedtests on the Vibrant (KB5 modem) in Mbps:
5.48 down 1.33 up
5.42 down 1.61 up
6.18 down, .41 up
3.98 down, .66 up
5.09 down, .38 up
3.90 down, 1.30 up
Click to expand...
Click to collapse
84 coming out next year
Sent from my SGH-T959 using XDA App
T-Mobile averages around 1-3 MBPS for me, and Simple Mobile always averages around 100 KBPS for me as well.
mrsbelpit said:
Depending on where you are, it should be a hell of a lot more than 100 kbps. T-Mo's HSPA+ areas theoretically can go up to 42 Mbps. My last few speedtests on the Vibrant (KB5 modem) in Mbps:
5.48 down 1.33 up
5.42 down 1.61 up
6.18 down, .41 up
3.98 down, .66 up
5.09 down, .38 up
3.90 down, 1.30 up
Click to expand...
Click to collapse
what's the advantage and disadvantage in using KB5 modem?
does KB5 modem increase 3G speeds in my simple mobile?
I too have let my contract expire with T-Mobile and went on with Simple Mobile, However I haven't seen any real difference between the two, meaning that T-Mobile was always slow for me and no matter what modems or configurations I tried, I never got the speed that others here are saying we should be getting.
Simple Mobile is using the same bandwidth as T-Mobile, because it is T-Mobile, so unless there was throttling or bandwidth restrictions that T-Mobile is implementing, based on the royalties or amount they pay T-mobile!!
Technically It should be the same as what the T-Mobile customers are getting, and In my case, I'm still getting the same ole slow assed data, that I had before when I was paying alot more to T-Mobile, I've been looking for a Holly Grail of tweaks, that might get my phone into the data performance I know Its capable of, but as of this moment, and after all this time, its still no better than Dial up, the only difference is I'm paying alot less than I was with TM.
Would love to find tweaks or configurations for my T959, that opens it up to some serious speed. And No I never DL anything enough month to month wise, to have them impose a CAP. But I'm so used to lag and poor performance, and the fact, that I wont ever go back to a CDMA provider again, So I'm stuck, unless I switch providers, like ATT which is serious $$, otherwise It would mean, putting my Vibrant in mothballs, And I love this phone, It takes the burden of running a laptop I used to need, to do the very same things I now accomplish with this phone, and simplifying my life, but with slow speed= Grrrrrrrrrrrr!!
Im also really interested to know!
Ok first thing first.
Both Tmobile and Simple Mobile does not provide unlimited 3g,
Tmobile (prepaid service that i use for 50 a month, a plan of relevance to the OP), provides 200mb of 3g service,
in this case, i would get 3mb speed, yet after the 200mb, they limit your service to 100 kbp range,
I have never used simple moblie before but i believe they use the same tower and provide more data, 2gig, and also cheaper,
so can someone tell me what varied data speed one would get for simple?
within 2 gig and after the capped data speed, thanx
hayabusa129 said:
Ok first thing first.
Both Tmobile and Simple Mobile does not provide unlimited 3g,
Tmobile (prepaid service that i use for 50 a month, a plan of relevance to the OP), provides 200mb of 3g service,
in this case, i would get 3mb speed, yet after the 200mb, they limit your service to 100 kbp range,
I have never used simple moblie before but i believe they use the same tower and provide more data, 2gig, and also cheaper,
so can someone tell me what varied data speed one would get for simple?
within 2 gig and after the capped data speed, thanx
Click to expand...
Click to collapse
I personally have been with simple for about a yr on both 4g and 3g speeds capped and uncapped
usually after you tether usb or wifi they will throttle you like almost that week and wont even know unless u call to be like wth
4g speeds are about the same as t-mobile
3g speeds are about 0.12Mbps even after changing from JK6 testing with different build props KA7 with different build props and even KB5 with different build props
For the most part i have been on these roms
Lithium/revamped/SS series by nickmcminn60
and lately the ICS series by neobuddy
unlocking
I just gotten a SIM for simple mobile, Know I am wondering being that i am on ICS Passion am i going to be needing to unlock my phone? I put the SIM in and it did not ask me to enter a password or anything. Thanks for any help
No need to unlock because its under T-Mobile go to your simple mobile apn change proxy to
216.155.165.50 for data and save
Open T-Mobile apn and match every field like all the fields in your simple mobile apn except these changes
Simple MMS - apn
simple - name
216.155.165.050 - proxy
8080 - port
These settings are to send and receive pictures mms
Sent from my GT-I9000 using xda premium
Defdealr said:
No need to unlock because its under T-Mobile go to your simple mobile apn change proxy to
216.155.165.50 for data and save
Open T-Mobile apn and match every field like all the fields in your simple mobile apn except these changes
Simple MMS - apn
simple - name
216.155.165.050 - proxy
8080 - port
These settings are to send and receive pictures mms
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
THANK YOU !!! sorry for screaming thank you lol
sumpter32 said:
THANK YOU !!! sorry for screaming thank you lol
Click to expand...
Click to collapse
No problem just hit thanks for me
revolutionize the planet stop SOPA vibrant power
To those simple mobile users with $ 40 monthly plan:
Will your 3G speed (128 kbs) will be lowered after you reach 2 GB ?
I have had both T-Mobile and Simple Mobile. I have a MyTouch 3GS and Vibrant. When on T-Mobile I usually was able to get ~1500 kbs however was paying $100/month for unlimited everything with a 5GB data throttle. After switching to Simple Mobile I am capped at ~120 kbs on either phone. My 3GS is running the latest CM7 nightly and my Vibrant is running ICS Passion 10.6. I have read on other forums that some users have complained to Simple Mobile and the support tech "reset" their internet and after, they received the download speeds closer to T-Mobile. I have contacted support twice and have yet to get that lucky. I mostly use WiFi therefore am happy with the $60/month saving.
3g?
I just moved to Simple mobile $40 plan. Their 3g speed is lower than t-mobile's 2g speed. On t-mobile 2g i had 130kbps and now on 3g I have 117kbps. Why they call it 3g speed plan.
Check out straight talk for 45 a month.. Just don't think it's unlimited data.
Sent from my SAMSUNG-SGH-I727 using xda premium
if simple mobile gave at LEAST 1mbps d/l speeds, I'd switch to them.. I had them before and their data speeds are nearly unusable.. I heard their 4G plan gives great speed, but I can't afford that..
Have you try the $30 pre paid, Tmobile plan, give you 100 minutes, unlimited text, 5gb high speed (4g) data, then throttle down until renewal date,
Sent from my GT-I9000 using xda premium
So guys, here is my story so far.
I have been on Tmobile contract for a while and decided to switch to a Prepay plan. The "unlimited" plans offered by t mobile are overpriced(+highly throttled) so I looked else where.
I am currently using simple mobile, which started with the 40$ plan. Soon after I noticed that the 40$ unlimited plan was highly throttled to about 140kbs and had to switch to the 60$.
With the bill almost doubling and simple mobiles piece of crap* service, I did some research and found out that straight talk was coming out with a 45$ truly unlimited plan with no throttling for at&t and tmobile. Now I havn't used it yet but ordered the tmobile sim card. I have heard great things about the at&t $45 plan and will switch after this month is over.
http://slickdeals.net/f/3898068-Straight-Talk-to-Allow-Any-GSM-Phone-on-the-45-Unlimited-Plan
shaolinx said:
So guys, here is my story so far.
I have been on Tmobile contract for a while and decided to switch to a Prepay plan. The "unlimited" plans offered by t mobile are overpriced(+highly throttled) so I looked else where.
I am currently using simple mobile, which started with the 40$ plan. Soon after I noticed that the 40$ unlimited plan was highly throttled to about 140kbs and had to switch to the 60$.
With the bill almost doubling and simple mobiles piece of crap* service, I did some research and found out that straight talk was coming out with a 45$ truly unlimited plan with no throttling for at&t and tmobile. Now I havn't used it yet but ordered the tmobile sim card. I have heard great things about the at&t $45 plan and will switch after this month is over.
http://slickdeals.net/f/3898068-Straight-Talk-to-Allow-Any-GSM-Phone-on-the-45-Unlimited-Plan
Click to expand...
Click to collapse
Will you please give a review about Straight-Talk next month? Is that $45 tax-included?
Thank you.
Hey guys. I have a HTC Titan II and started using it yesterday. I placed the sim card I had from my previous phone (xperia play r800a), and noticed that it shows I have a 4G connection. However, as soon as I open up the browser nothing happens. Says there is something wrong with my data connection. I took the card out and placed it back in my xperia play. Internet seemed fine.
Then I read that it may have to do with my sim not being a 4G LTE sim; so I went to the ATT store this morning and got a new sim. I asked if it was a 4G LTE sim, and the girl informed me that all newer sims are 4G LTE sims. I took the new sim and placed it in the T2. Still nothing.
So I am unsure as to what the issue is. I have a cheap unlimited ATT data plan that has been working like a champ for the last couple of years. I figured that at the very least, I would get 3G speeds on the T2 since I am not on a 4G plan.
Any advice? Thanks!!
You have to have your data plan updated to the LTE plan (you get to keep what ever data cap you have today, unlimited or else). You can do it by calling customer service or in AT&T stores. Otherwise, it will not work. The LTE connection uses pta APN which requires LTE data plan on your account.
foxbat121 said:
You have to have your data plan updated to the LTE plan (you get to keep what ever data cap you have today, unlimited or else). You can do it by calling customer service or in AT&T stores. Otherwise, it will not work. The LTE connection uses pta APN which requires LTE data plan on your account.
Click to expand...
Click to collapse
Thanks for the info. I am currently paying $30 for unlimited data (non-smartphone) with texting. I am assuming when switching over to LTE that I'll be responsible for paying some sort of premium because I'm guessing they don't have non-smartphone LTE plans.
I managed to get data to work by editing the APN info on the phone. It works, but I do not think it's running at LTE speeds or even 4G (even though it says 4G at the top of my phone).
krillin said:
Thanks for the info. I am currently paying $30 for unlimited data (non-smartphone) with texting. I am assuming when switching over to LTE that I'll be responsible for paying some sort of premium because I'm guessing they don't have non-smartphone LTE plans.
I managed to get data to work by editing the APN info on the phone. It works, but I do not think it's running at LTE speeds or even 4G (even though it says 4G at the top of my phone).
Click to expand...
Click to collapse
What APN did you enter? Just do following to get 4G speeds:
1) Add APN
2) wap.cingular
3) Reboot or wait 3-4 mins
I just switch to LTE APN. It is fast, but from what I'm reading online, I've set myself up for tighter AT&T controls around tethering, throttling etc. But, I can confirm that it is backwards compatible.
sumeet909 said:
What APN did you enter? Just do following to get 4G speeds:
1) Add APN
2) wap.cingular
3) Reboot or wait 3-4 mins
I just switch to LTE APN. It is fast, but from what I'm reading online, I've set myself up for tighter AT&T controls around tethering, throttling etc. But, I can confirm that it is backwards compatible.
Click to expand...
Click to collapse
I went to the connection settings, pressed on "ADD APN". For the name, I entered, "AT&T HSPA+". That's it, and internet works. It says 4G at the very top of my phone, but not LTE. I assumed this was normal. Would entering wap.cingular be faster?
Thanks!
I think AT&T HSPA+ is supposed to be quicker than wap.cingular
I read it some place a few minutes ago but I lost the page. Someone ran a test and speedtest.net had higher speeds and lower pings.
You will need the pta APN to get LTE connection. You will need Phone APN to get real HSPA+ speed (if you want anything over 6mbps). Otherwise, wap.cingular gives you 3G speed (which all new AT&T phones will show it as 4G, lame).
Both pta and Phone APN requires specific data plan codes on your account (If you have LTE data plan, you can use both pta and Phone APNs but HSPA+/4G data plan can only use Phone APN).
AT&T did so exactly to prevent customers like you who have an old non-smartphone data plan to take advantage of its new high speed data network without paying for it.
In most places, HSPA+ speed is not much quicker than 3G/wap.Cingular beause AT&T's HSPA+ network is over congested. However, LTE is on a separate network and the data speeds are significantly faster than HSPA+.
foxbat121 said:
AT&T did so exactly to prevent customers like you...who take advantage of its new high speed data network without paying for it.
Click to expand...
Click to collapse
Geez...tell me how you truly feel.
JK! Thanks for clearing that up.
LoL, nice editing. NBC should hire you
Now you have to decide whether to save $$ but use slower 3G data or pay up to trade for higher speed. You won't get to keep the unlimited because your current plan is not qualified smartphone plan. So, basically you are looking at $30 for 3GB + $20 for unlimited text.
Need a SIM card
I had the same problem as I got my phone free from a MS store (traded them my old windows mobile device for it). I ended up having to take the phone to an AT&T store and they stated that my SIM card would never work with the phone for data. It was a 3G SIM card. They also changed the data plan so maybe both are required.
shawnl01 said:
I had the same problem as I got my phone free from a MS store (traded them my old windows mobile device for it). I ended up having to take the phone to an AT&T store and they stated that my SIM card would never work with the phone for data. It was a 3G SIM card. They also changed the data plan so maybe both are required.
Click to expand...
Click to collapse
Both are required. But if your existing SIM is new enough it should support LTE without problem (there was a specific SIM card ID range to support LTE).
BTW, if your phone is connecting on LTE, it will show LTE instead of 4G on the notification bar.
shawnl01 said:
I had the same problem as I got my phone free from a MS store (traded them my old windows mobile device for it). I ended up having to take the phone to an AT&T store and they stated that my SIM card would never work with the phone for data. It was a 3G SIM card. They also changed the data plan so maybe both are required.
Click to expand...
Click to collapse
for whatever reason, I read somewhere around here that that particular SIM made your "smartphone exclusion" hold-up against most recent phones. So, you gave that benefit away - don't worry if you don't know much about it.
wap.cingular gave me data thanks! But I am a little confused is it 3g or HSPA+? I don't need to change my data plan for LTE (since it isn't in Seattle yet) but I want to change it if I am not getting HSPA+
metalgod862 said:
wap.cingular gave me data thanks! But I am a little confused is it 3g or HSPA+? I don't need to change my data plan for LTE (since it isn't in Seattle yet) but I want to change it if I am not getting HSPA+
Click to expand...
Click to collapse
HSPA+ in WP7 gets represented with an "H" or "4G"
3G gets represent with a regular "3G"
LTE with "LTE"
Most likely you are under HSPA+ ... Do a Speed Test with an app like "Bandwidth" to see where you max out and that should give you an idea if its 3G or H
Tachi91 said:
HSPA+ in WP7 gets represented with an "H" or "4G"
3G gets represent with a regular "3G"
LTE with "LTE"
Most likely you are under HSPA+ ... Do a Speed Test with an app like "Bandwidth" to see where you max out and that should give you an idea if its 3G or H
Click to expand...
Click to collapse
it says 4g and I get about 3mbs I am assuming its HSPA+ thanks for clarifying!
All AT&T new phones, including iPhone with iOS5 update, will say 4G even if it is on 3G. It really doesn't matter much. 3G and HSPA+ in most places are same speed. You only need to worry about it if you want LTE. If you don't have LTE, leave it alone.
I have put both APNs mentioned and that seems to work for a little while, but eventually the data cuts out again.
Is this an issue similar to what is happening with the Lumina 900? Is this a Microsoft problem or AT&T? And is anyone else still having issues after updating the apn like I am?
try APNhone
Name:whatever
it works for me.
hrzlvn said:
try APNhone
Name:whatever
it works for me.
Click to expand...
Click to collapse
does nothing for mine. i've tried it already.
Your data plan limits you to wap.cingular APN only. Nothing else will work for you.
foxbat121 said:
Your data plan limits you to wap.cingular APN only. Nothing else will work for you.
Click to expand...
Click to collapse
Since my MMS and tethering no longer work with this phone, it looks as if I may have to switch out my plan(s) and fork over $70 ($50 data+$20 text). IMHO, a bit of a rip off...OR I can just go back to my xplay and everything will work as it was...but where is the fun in that?