I was rooted (using Indirect's method) but i couldnt get into recovery... it would pull up the card board box and then continues to load up... now the damn thing goes to the cardboard box and restarts and just keeps looping over and over... wtf did i do lol what can i do to fix this?
any help is appreciated...
i would make a bootable cm7 rom card and then install recovery flasher and flash stock recovery only if this is a 16gb NT, if this is a 8gb NT you may be bricked
i got the 16gb...just to confirm, i should do the sdcard image install from this thread: http://forum.xda-developers.com/showthread.php?t=1481826 ??
if not, please point me in the right direction... thanks!
nando99 said:
i got the 16gb...just to confirm, i should do the sdcard image install from this thread: http://forum.xda-developers.com/showthread.php?t=1481826 ??
if not, please point me in the right direction... thanks!
Click to expand...
Click to collapse
Yes, just make the bootable CM7 card then flash stock recovery using Indirect's app.
do i have to flash stop recovery? can i not use/flash cm7?
i'm so lost
nando99 said:
do i have to flash stop recovery? can i not use/flash cm7?
i'm so lost
Click to expand...
Click to collapse
What's your ultimate goal here? Are you trying to flash CM7 to internal?
yes... i wana run either cm7 or cm9... whatever is easiest from my current situation...
And do you want to have CWM installed internally or do you want the custom recovery only to be run from SD?
again, whatever is easiest and/or best... i'd prefer it on the actual nook...
nando99 said:
again, whatever is easiest and/or best... i'd prefer it on the actual nook...
Click to expand...
Click to collapse
That's the way I like to do things, too.
So, to do this, you will have to use Indirect's app to install CWM internally. I know it didn't work this first time, but try it again. So try re-flashing CWM using Indirect's app, then try rebooting into recovery.
If this doesn't work, you can try a bootable CWM SD card.
just to confirm, http://forum.xda-developers.com/showthread.php?t=1446987 - method 2 correct?
method two requires the ADB ( android debug bridge ) is working up happy. for me and my nook, i did not get the 'adb' working till two months later. So, i used method one. .
but i think ( imho ) you got or developed something goofy in the sd memory... so, if i were you i would do the 'adam outler' total wipe and clean first.
http://forum.xda-developers.com/showthread.php?t=1470910
.
for me, getting adb going . . . was driving me nuts ! ( hacking in the registry - ouch ! )
Whoa there, hold off on the total wipe idea! That is only a last resort, in any situation.
Just try to install CWM internally again using Indirect's app. Then report back so that we know that method definitely isn't working for you.
Solar.Plexus said:
Whoa there, hold off on the total wipe idea! That is only a last resort, in any situation.
Just try to install CWM internally again using Indirect's app. Then report back so that we know that method definitely isn't working for you.
Click to expand...
Click to collapse
lol sent u a PM
Solar.Plexus is freaking AWESOME... i asked for some 1 on 1 help and he did and now everything is great...
these are the steps I took to get cm7 on MY nook (I was already rooted)
step 1 - get cm7 on sd card and boot from it...
http://forum.xda-developers.com/showthread.php?t=1481826 (SD VERSION)
step 2 - install CWM
http://forum.xda-developers.com/showthread.php?t=1458630
(go here from nook, download/install, flash cwm recovery, reboot to recovery)
step 3 - stay in recovery
back to http://forum.xda-developers.com/showthread.php?t=1481826 (INTERNAL VERSION)
VIOLA!!!
thanks a million Solar.Plexus
Haha all in a day's work. If you edit your first post of this thread, you can change the title to add [SOLVED] so users know this thread revealed a solution to somebody. Glad we got it working again!
Related
the phone keeps coming up with a error. With a picture of a phone with a triangle with a exclamation point inside of it.
I have been searching I hope somebody can tell me.
ravenv12 said:
the phone keeps coming up with a error. With a picture of a phone with a triangle with a exclamation point inside of it.
I have been searching I hope somebody can tell me.
Click to expand...
Click to collapse
That's the stock recovery. If you think that you are rooted with a custom recovery like Amon_RA, it sounds like either you are not, or you were and somehow you restored the stock recovery.
So, are you rooted? Is this the first time that you tried to get into Recovery? What method did you use to root the phone?
Universal 1 Click Eris Root App Apk - No PCs, No Scripts Needed, EASY
I'm not sure what I did wrong. I guess I need to know where I need to start from to restore the phone. So if someone can point me to the right direction that would be great. Also I'm not sure if the phone is Rooted still , I think were I messed up is where, I was installing custom ROM on the phone When it was booting up. It locked up at the loading spring. i installed GSB.v3.0-CM7.0.2-Eris
http://forum.xda-developers.com/showthread.php?t=792026 this will put you back to stock unrooted or download the rootcheck app in the market and check if you have root
if so then dont flash back to stock download rom manger and use that to flash a recovery either clockwork or scroll down and flash amons recovery i recommend amon ra recovery
ravenv12 said:
Universal 1 Click Eris Root App Apk - No PCs, No Scripts Needed, EASY
I'm not sure what I did wrong. I guess I need to know where I need to start from to restore the phone. So if someone can point me to the right direction that would be great. Also I'm not sure if the phone is Rooted still , I think were I messed up is where, I was installing custom ROM on the phone When it was booting up. It locked up at the loading spring. i installed GSB.v3.0-CM7.0.2-Eris
Click to expand...
Click to collapse
Wait, so that sounds like you actually had Amon_RA recovery?
Question: when you installed GSB, did you wipe data/factory reset? And also flash Google apps?
If you start in the bootloader (hold VolDn when you power up), there should be a prompt to press VolUp to start in Recovery. If you press power up, do you get the Amon_RA recovery or do you get the exclamation point with triangle?
I fixed it last night I installed Amon_RA recovery . But I went back to GSB v3.0 where I messed up the first time installed find the second time but my SD card is not recognizing anymore. in the os. Only my 1gb SD card works now.
ravenv12 said:
I fixed it last night I installed Amon_RA recovery . But I went back to GSB v3.0 where I messed up the first time installed find the second time but my SD card is not recognizing anymore. in the os. Only my 1gb SD card works now.
Click to expand...
Click to collapse
Did you ever partition the card for apps2sd on a ROM like xtrROM? If so, you'll need to repartition the card so it has only one partition. (You do this the same way that you partitioned - namely:
- backup the contents of your SD card
- restart in Recovery
- partition SD card menu
- partition SD
- set the options for partition sizes for ext2 and swap to 0 bytes
That will reset the card to a single partition, formatted fresh.
Thanks you guys, it's completely working now.
good news
it sure is good news. But now my friend has one that he's willing to sell me for $10.00 but it does not boot and I've been trying to fix it . I would like to get it for my girlfriend but figure if there's anything that can be done to it I think it's a paperweight. I can get to HBoot and fastboot . But not to recovery.
But for 10 bucks you can't beat it for parts right if I cant fix it
ravenv12 said:
it sure is good news. But now my friend has one that he's willing to sell me for $10.00 but it does not boot and I've been trying to fix it . I would like to get it for my girlfriend but figure if there's anything that can be done to it I think it's a paperweight. I can get to HBoot and fastboot . But not to recovery.
But for 10 bucks you can't beat it for parts right if I cant fix it
Click to expand...
Click to collapse
Well have you tried the same thing for that phone as your phone you just got working? I'm pretty sure if you can get to hboot and faatboot then there's still hope. I just don't know how to fix but I'm sure someone will help you out soon enough
Sent from my Gin-Tazz using Tapatalk
I'm starting to think the phone has hardware issues also so I don't think it's can be fixed I think it's for parts only
Thank you for your time.
I was attempting to install this "supercharger script" on my "Galaxy Tab 10.1 Wifi" and it failed. And now I am left with a tab that does boot loops very nicely. One thing I forgot to do after rooting my device was make a "nandroid" back up. (Which was very lame and which I regret now because I was all too excited about a rooted tab) I tried numerous attempts to get a rom file into my tab, the nvflash method too but none of them worked.
Anyhoo, I was wondering if there is a way to somehow access the tab's so called "SD card" memory to which I can transfer a backup ROM I have on my pc (or any rom) and flash it through the CWM.
Thanks in advance and thank you for your time again.
mzeesh2006 said:
Thank you for your time.
I was attempting to install this "supercharger script" on my "Galaxy Tab 10.1 Wifi" and it failed. And now I am left with a tab that does boot loops very nicely. One thing I forgot to do after rooting my device was make a "nandroid" back up. (Which was very lame and which I regret now because I was all too excited about a rooted tab) I tried numerous attempts to get a rom file into my tab, the nvflash method too but none of them worked.
Anyhoo, I was wondering if there is a way to somehow access the tab's so called "SD card" memory to which I can transfer a backup ROM I have on my pc (or any rom) and flash it through the CWM.
Thanks in advance and thank you for your time again.
Click to expand...
Click to collapse
If you can get into download mode, you can just use Odin to flash a new ROM: http://forum.xda-developers.com/showthread.php?t=1167250
The ASIAN ROM is the most recent (don't worry it defaults to English). Also, this will wipe your SDcard.
varelawarfare said:
If you can get into download mode, you can just use Odin to flash a new ROM: http://forum.xda-developers.com/showthread.php?t=1167250
The ASIAN ROM is the most recent (don't worry it defaults to English). Also, this will wipe your SDcard.
Click to expand...
Click to collapse
Yeah bro, you're gonna have to do this because there's no way to access your sdcard to get a new ROM up there. Sorry about having to wipe your sdcard
Thank you for your reply Varelawarfare. The link provided is for the P7510 (me being the P7500). But I am assuming that it may work for both. (I haven't read that thread yet cos I came to work and jumped into replying).
Anyhoo, thanks for the link.. I'll try it out.
Tivo7 said:
Yeah bro, you're gonna have to do this because there's no way to access your sdcard to get a new ROM up there. Sorry about having to wipe your sdcard
Click to expand...
Click to collapse
Ah knoo, but it's okay for me to wipe my card. (I have a backup of everything on my pc, but I was dumb not to do a nandroid backup).
Will flash the bi**h once I get home. Thank you.
mzeesh2006 said:
Thank you for your reply Varelawarfare. The link provided is for the P7510 (me being the P7500). But I am assuming that it may work for both. (I haven't read that thread yet cos I came to work and jumped into replying).
Anyhoo, thanks for the link.. I'll try it out.
Click to expand...
Click to collapse
Okay, that worked. The bi**h is back on it's legs. Thanks a tonne for your time and help. I'll keep pressing the thanks button and get suspended for spamming. Thanks a lot.
I have a 16GB Nook Tablet that had the software 1.4.2 on it. I rooted it using the sd card method and installed CM7. Rom ran perfectly. I turned off boot animation. I held down power button to restart and now it won't turn on. I boot into clockwork mod to try and reflash something but get an error.
Can you still boot into your CM7 SD ROM?
Solar.Plexus said:
Can you still boot into your CM7 SD ROM?
Click to expand...
Click to collapse
I don't think so. I formatted the sd card so I could put pictures ect back on. I then re-made sd boot disk but still doesn't work.
Tried [UnBrick]TOTAL WIPE and reflash back to 1.4.0 via Ubuntu Recovery and it gets stuck at "writing all zeros to MLO"
Noob needs some assistance, haha
I successfully booted CM7 off of sd card. Are the partitions screwed up?
afastyzfr1 said:
I successfully booted CM7 off of sd card. Are the partitions screwed up?
Click to expand...
Click to collapse
Try to find the Barnes and Noble factory image in the Development subforum.
I can't remember where it is but you write the image to an SD card and just power on the device with the card inside and observe a complete restore.
Sent from my R800x
Solar.Plexus said:
Try to find the Barnes and Noble factory image in the Development subforum.
I can't remember where it is but you write the image to an SD card and just power on the device with the card inside and observe a complete restore.
Sent from my R800x
Click to expand...
Click to collapse
Are you referring to something different than the Ubuntu Recovery? I'll look but if anyone has the link, please post it
afastyzfr1 said:
Are you referring to something different than the Ubuntu Recovery? I'll look but if anyone has the link, please post it
Click to expand...
Click to collapse
This is what I used for a problem NT a while back, post #8 by CRE (props); hope this helps.
http://forum.xda-developers.com/showthread.php?t=1562130
LMN8R said:
This is what I used for a problem NT a while back, post #8 by CRE (props); hope this helps.
http://forum.xda-developers.com/showthread.php?t=1562130
Click to expand...
Click to collapse
I tried post #8 and it appeared to work but after shutting down and removing sd card, it still just bootloops on the n screen
afastyzfr1 said:
I tried post #8 and it appeared to work but after shutting down and removing sd card, it still just bootloops on the n screen
Click to expand...
Click to collapse
Check this tutorial by raywaldo http://www.youtube.com/watch?v=ZIrgkjen8ro (props); this time you should get your NT to boot properly, & hope it works out for you.
LMN8R said:
Check this tutorial by raywaldo http://www.youtube.com/watch?v=ZIrgkjen8ro (props); this time you should get your NT to boot properly, & hope it works out for you.
Click to expand...
Click to collapse
I have tried this and raywaldo is trying to help me through pm's.....but this is what I get when device starts up with sdcard:
Note the red x in upper right hand corner that doesn't appear on his:
I don't get a green check. Instead I get this screen. Then I remove sd card and try to turn the nook on and it just shows the n screen and turns off
Can anyone help?
I somehow screwed up my partitions recently. Couldn't get out of bootloop. Let me look for the method I used. Brb
ok. to begin, here's how i screwed mine up. i was running cm9 with cyanoboot and twrp. i was running through several backups and compressing them. after one, i ended up in a bootloop with cyanoboot that continuously went to recovery. i do not know what all was wrong with the device specificly, but i tried adamoutlers ubuntu, and various other steps. nothing worked. i found my solution using several different threads. ultimately, this is what worked....
i can not claim any responsibility if this screws up your device more than it already is.
read all of this and these links before performing anything. fully charge your device beforehand!
get SDFormatter to have properly a properly formatted sdcard
my NT is a 16gb, and i use a windows 7 pc.
first, create a bootable cwm sdcard. NOTE: i was able to get both steps below onto the root of the sdcard.
second, run this zip to clear the boot count... you may or may not need this. i dont see where it would hurt starting fresh.
http://www.mediafire.com/?lybnkrvgjnqc65b
(original post- http://forum.xda-developers.com/showpost.php?p=26570960&postcount=18)
third, replace partition 1-4 and 6. i presume this restores the b&n recovery. run this zip...
http://www.mediafire.com/?z2n5h3k81a0nsy8
(original post - http://forum.xda-developers.com/showpost.php?p=26575066&postcount=20)
fourth, restore the stock 1.4.2 rom, unrooted.
i used this method: http://forum.xda-developers.com/showpost.php?p=26329581&postcount=1
you may already have a copy of the stock rom, but if you are getting errors, i would download another. CHECKSUM!!!!! i have dicked up more devices than i care to count because of a bad download. i now use MD5_SHA-1 Utility. google it for download.
then i re-rooted using this sdcard method: http://forum.xda-developers.com/showpost.php?p=21275927&postcount=1
again, i can not claim any responsibility if this screws up your device more than it already is. i do hope this helps. it fixed mine.
Sent from my NookTablet using xda premium
I followed your steps and still am in the same position
Tried to flash a ROM as well
afastyzfr1 said:
I followed your steps and still am in the same position
Tried to flash a ROM as well
Click to expand...
Click to collapse
i am having the same problem. i did the the same thing you did. please help lol
Any more help?
............
Pop into the IRC channel and see if someone can help ya out.
afastyzfr1 said:
............
Click to expand...
Click to collapse
I'm in the same situation. Did you find any resolution?
Thanks.
---------- Post added at 06:39 PM ---------- Previous post was at 06:21 PM ----------
frankvcs said:
I'm in the same situation. Did you find any solution?
Thanks.
Click to expand...
Click to collapse
I'm in the same situation. Did you find any solution?
Thanks.
frankvcs said:
I'm in the same situation. Did you find any solution?
Click to expand...
Click to collapse
Need to fix internal partitions but not sure how to easily do that yet
I followed a post on here from malloneem - http://forum.xda-developers.com/showthread.php?t=2037368 - but I ran into an issue. I have CM7 running just fine on NT (thanks by the way ) but I'm trying up "upgrade" to CM10. I can boot into recovery and then into TWRP but it hangs after selecting the acclaim.zip file and gapps file. It states "Flashing file 1 of 2 /sdcard/sgt7-10-20121124-UNOFFICIAL-acclaim.zip" I let it run for 2 hours, but no luck.
Thanks in advance!
SuicidalSoldier said:
I followed a post on here from malloneem - http://forum.xda-developers.com/showthread.php?t=2037368 - but I ran into an issue. I have CM7 running just fine on NT (thanks by the way ) but I'm trying up "upgrade" to CM10. I can boot into recovery and then into TWRP but it hangs after selecting the acclaim.zip file and gapps file. It states "Flashing file 1 of 2 /sdcard/sgt7-10-20121124-UNOFFICIAL-acclaim.zip" I let it run for 2 hours, but no luck.
Thanks in advance!
Click to expand...
Click to collapse
The method you're using is rather old. Before you try anything else I will interrupt your possibly long strenuous process of flashing CM10.
Before you attempt anything else, restore your tablet. You might be mad at me for saying this, but it makes things easier using the newer methods for flashing ROMs. You can restore your tablet by writing this repart.img to an SD card and putting it in your nook. It will write stock BN ROM to your tablet. Use this:
http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/
A lot of people have problems with TWRP. I could never get it to stop freezing up. Assuming you want to internally flash CM10 I'll give you this link to follow:
http://iamafanof.wordpress.com/2012/11/03/cm10-0-jelly-bean-for-nook-tablet-uploading/
If you are new to flashing ROMs there is a very simple way of using CM10 from an SD card. Just write it to your SD card and you're good! You can use a partitioning tool such as MiniTool to expand the different partitions of your SD card. Use this method if you want run from an SD card.
http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
If you run into any problems along the way, just ask!
I appreciate the reply. I was able to flash back to factory, but I'm a bit perplexed on the second link. I do want to run CM10 internally. I was able to grab the file, but the link isn't exactly noob friendly on a "how to". Could you point me in the right direction to get started on this?
Thanks
SuicidalSoldier said:
I appreciate the reply. I was able to flash back to factory, but I'm a bit perplexed on the second link. I do want to run CM10 internally. I was able to grab the file, but the link isn't exactly noob friendly on a "how to". Could you point me in the right direction to get started on this?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2056626
Try this out.
Mega simple super duper easy way where you don't have to set up any partitions at all:
1. Download one of the ready-made CM10 sd-card images on Iamafanof website. Doesn't matter which! These images contain Cyanoboot.
2. Burn this image
3. Put your CM10 and gApps on this or another sd card.
4. Boot into Cyanoboot by holdninh "n" during bootup. Choose "sd recovery"
5. Clear cache and dalvik
6. Choose your zips and flash them
Once CM10 is installed you'll have Cyanboboot and CWM installed internally so if you need to reflass you just boot into Cyanoboot by holding the "n" at bootup.
datallboy said:
http://forum.xda-developers.com/showthread.php?t=2056626
Try this out.
Click to expand...
Click to collapse
@SuicidalSoldier:
I'd also suggest taking a look at http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for more info/pointers -- especially w.r.t. making backup in case you make mistakes in flashing.
Thank you for the info. I'll give these a try and post back my results.
Somehow after installing I keep stuck at the CyanogenMod splash screen.
I have already re-installed but to no avail.
Any hints?
shadowhumper said:
Somehow after installing I keep stuck at the CyanogenMod splash screen.
I have already re-installed but to no avail.
Any hints?
Click to expand...
Click to collapse
Takes a while for the initial boot to start. Just wait 2 or 3 minutes and it should boot.
datallboy said:
Takes a while for the initial boot to start. Just wait 2 or 3 minutes and it should boot.
Click to expand...
Click to collapse
It indeed takes 2-3 minutes but then it just flashes the Android home screen and goes back to the cyanogenmod boot splash screen.
I am guessing I should install another build perhaps?
shadowhumper said:
It indeed takes 2-3 minutes but then it just flashes the Android home screen and goes back to the cyanogenmod boot splash screen.
I am guessing I should install another build perhaps?
Click to expand...
Click to collapse
Go to recovery and do a factory rest/total wipe, wipe cache, wipe dalvik cache. Then install the ROM again. If it still doesn't work try a different ROM.
shadowhumper said:
It indeed takes 2-3 minutes but then it just flashes the Android home screen and goes back to the cyanogenmod boot splash screen.
I am guessing I should install another build perhaps?
Click to expand...
Click to collapse
By "cyanogenmod boot splash" do you means "Cyanoboot splash" or "Cyanogenmod boot-animation"?
You need to say more on what you did to "flash the ROM" so that we can discern what you might have done wrong.
datallboy said:
Go to recovery and do a factory rest/total wipe, wipe cache, wipe dalvik cache. Then install the ROM again. If it still doesn't work try a different ROM.
Click to expand...
Click to collapse
Thanks dude, that did the trick. I guess the problem I had was with a corrupt image that I have downloaded.
Hello everyone. I need some help here. I am a noob ( 7 out of 10, on the noobometer)
my device is HTC Amaze (carrier Wind in Canada). Bootloader unlocked, S ON, Rooted, Recovery TWRP (latest version). H boot: 1.93.0002 CID: GLOBA001
I had ICS before I started rooting and everything. I completely deleted the stock version without any back up. I tried installing Kit Kat, install would go through, but then the phone will get stuck on bootloop. Same happened when I tried Jelly Beans, and CM 10.
(I followed all the procedures of wiping device and flashing ROMs)
Then decided to go back to stock. I found a stock version on this site. http://forum.xda-developers.com/wiki/HTC_Amaze_4G/ROMs#Stock_ROMs
locked the bootloader, change the file name to required name, and yet it does not install. after bootloader checked the SD card and checked the ruu zip, it does nothing.
I tired this with Ginger bread version stock, and the installation will complete, but then when the phone reboots, again it gets stuck in boot loop.
I tried executing and exe version of the stock ruu through usb, and the installation will fail saying hboot is older!
Can anyone please help me? I need to either go back to sock ICS or install Jelly Beans . But I need the phone to operate, most of all.
Do I need to S off? is that why I am having all this issue? and If I do need to S off, how can I do that now? now that I dont have any stock rom on the phone. (according to my research, you need stock ROM to S off.)
Thank you in advance.
bootloop
moonrocker316 said:
Hello everyone. I need some help here..., it does nothing.
Thank you in advance.
Click to expand...
Click to collapse
Bootloop because nothing flashes S-ON except 4EXT recovery. 4EXT recovery will pre-flash the kernel, if you enter the 4EXT recovery settings and tell it to use "Smart Flash."
You can search the forum and find the instructions to get 4EXT recovery on your phone (I think WinDroid Universal will do it) Then you can go back and flash your ICS ROM.
Currently the most stable are the ICS--unless you want to play around or start dev'ing or just for fun, GB is too old, and KK is too new.
pbergonzi said:
Bootloop because nothing flashes S-ON except 4EXT recovery. 4EXT recovery will pre-flash the kernel, if you enter the 4EXT recovery settings and tell it to use "Smart Flash."
You can search the forum and find the instructions to get 4EXT recovery on your phone (I think WinDroid Universal will do it) Then you can go back and flash your ICS ROM.
Currently the most stable are the ICS--unless you want to play around or start dev'ing or just for fun, GB is too old, and KK is too new.
Click to expand...
Click to collapse
Thanks a lot. Your reply gave a some hope and I went back to working on it. However, when in 4EXT, I started have the issue of "can't mount SD card. Neither my internal or external SD card would mount.
Then I did some more research that found out that I can also manually Flash boot.img if I didn't use 4EXT. And much to my surprise that worked!!
So my phone is working now in CM 10. however, I still can't mount my SD cards, internal and external. Would you be able to help me that too?
Thanks in advance.
mount cards
moonrocker316 said:
I still can't mount my SD cards, internal and external. Would you be able to help me that too?
Thanks in advance.
Click to expand...
Click to collapse
Glad you found a good way to do that, and are self-motivated.
When mine wouldn't mount, I went into the 4EXT tools, told it to check the partitions, repair the filesystem, fix permissions, and then it worked for me. It was is if it had to re-discover the cards or something..., I really don't know. If that don't fix it for you, come back and someone else will have some ideas.
And search around a little--I'm sure that's happened to others.
pbergonzi said:
If that don't fix it for you, come back and someone else will have some ideas.
And search around a little--I'm sure that's happened to others.
Click to expand...
Click to collapse
I did the 4EXT sd card check, file system check, partition check, but still having the same issue. Also, Its only happening to Internal SD card. The external SD card is mounting now (I guess after doing the checks in 4EXT)
I am doing searches now, lets see what I can come back with.
can't mount internal
moonrocker316 said:
I did the 4EXT sd card check, file system check, partition check, but still having the same issue. Also, Its only happening to Internal SD card. The external SD card is mounting now (I guess after doing the checks in 4EXT)
I am doing searches now, lets see what I can come back with.
Click to expand...
Click to collapse
You might try it without the external SD in it. Also, someone recently said something about a special way to format the internal I think.
Maybe it was here:
http://forum.xda-developers.com/showthread.php?t=2592999
pbergonzi said:
You might try it without the external SD in it. Also, someone recently said something about a special way to format the internal I think.
Maybe it was here:
http://forum.xda-developers.com/showthread.php?t=2592999
Click to expand...
Click to collapse
I actually did a format from Recovery and that fixed it! Now the internal SD card is available.
I need help on upgrading htc amaze to ics or higerm plz help
Sent from my Nokia_XL using XDA Premium 4 mobile app