Hi I want to install latest CM9 nightly, As Im installing first time, I just want to make sure that my phone is running firmware lower than XXLPH though it looks lower but cant judge, I went through official CM9 Thread I can follow all the steps except this one. And also I have already rooted my device using
GT-I9100_THR_I9100JPKJ2_I9100OJPKJ1_I9100XXKI4 (firmware) and
CF-Root-SGS2_XW_XEF_KJ2-v4.4-CWM4.tar (root kernel)
I still havent installed any custom rom yet.
Here is my current phone details:
GT-19100
Android 2.3.5 (STOCK)
Baseband 19100XXKI4
Kernel 2.6.35.7-I9100XWKJ2-CL676699root
____________________________________________
I thought my firmware is higher than XXLPH so I found this guide to ugrade to ice cream firmware first:
http://androidbeast.com/937/tutoria...oid-ice-cream-firmware-on-galaxy-s2-gt-i9100/
then root it with this kernel :
http://androidbeast.com/948/root-samsung-galaxy-s2-cf-root-kernel-odin/
Now I need your advice that weather should I continue following above guide or should I start flashing CM9 firmware staright away ??
now that you are rooted and on ics, you can then follow the instructions in CM9 thread.
Flash odin version first and then update to latest build from cwm recovery
codeworkx said:
If you're a bloody noob and getting confused by following simple instructions, go down and read about using the noob-proof ODIN method.
First time installing CyanogenMod 9 to your Galaxy S II, or coming from another ROM:
- READ FAQs: http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100:Frequently_Asked_Questions
- Make sure you're running ICS bootloaders lower than LPH: Download (flash as PDA with odin or extract and $ sudo heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin)
- make sure you're running a proper working CWM like the one from CM7
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 9:
- Copy CM9 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Wipe cache partition and dalvik-cache
- Reboot
Using the noob-proof ODIN method:
- Download CM9 Resurrection Edition
- Download GApps and put it onto your internal sdcard
- Open Odin
- Choose cm-9-XXXXXXXX-ODIN-galaxys2.tar.md5 as PDA
- Boot your phone into download mode
- Connect your device via usb to your computer
- Wait till Odin has fully recognized your phone
- Hit the start button and wait till the flash process is finished
- Device boots automatically into recovery
- Flash GApps, wipe cache and dalvik-cache
- Reboot into CM9
- Follow above steps to update CM9 to lastest available version (Upgrading from earlier version of CyanogenMod 9)
Click to expand...
Click to collapse
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
loverdude said:
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
Oh i get it! First i should use noob proof method then i should use "Upgrading from earlier version of cm 9" regardless of what firmware i currently have am i right?
Sent from my GT-I9100 using XDA
ctomgee said:
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
Click to expand...
Click to collapse
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
loverdude said:
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
BobPowers said:
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
Click to expand...
Click to collapse
Hey i succeeded!!!! Im soooo happy! first I followed your website which u gave me to install Resurrection Rom then I upgraded to cm9 through zip file CWM recovery. thanks a bunch man
ctomgee said:
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Click to expand...
Click to collapse
Actually on that post I wasn't sure which ROM was based on what firmware but i came to know from users like you and I got clear idea from you all before that in the mean time, i was gathering info through various guides, videos from weeks and merged those ideas in to one then I decided to install CM9 as it looks similar to new galaxy nexus phone and this is exactly what I wanted my phone to look and behave like. Now I am happy and satisfied.
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
kami2k said:
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
Click to expand...
Click to collapse
Man... why did you the touch the bootloader first? never play with it unless you know whats gonna happen! and about noob installation guide for CM9 is not clearly noobproof, I completely did all installation with clockworkmod recovery, I used ODIN only once for rooting my phone after that i never used it as I was very very cautious and careful about each and everything bit i was doing.
But never loose hope, you never know what kind of brick you have you have two ways to unbrick your phone,
1.Using USB jig, search it on XDA, Google, Youtube
2.JTAG Service, This is the ultimate solution if your phone is completely Hard bricked but for this you have to send your device to them.
here is their demonstration:
http://www.youtube.com/watch?v=kQdTi2vgMmY
its written in the cm9 installation to do the boot-loader with ODIN, that is what i do
oh bhai....... make sure you had i9100 not the i9100G,
remove battery and see if you can get download mode.
im running cm9 on new bootloader unless intratech still removes them from his stock ROm as he used too..... i came from stock LPS to cm9
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
kami2k said:
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
Click to expand...
Click to collapse
you dont get it i9100G is also S2 and virtually same. you have to see under the batter if its written i9100 or i9100G.
because thats what would happened if you flash i9100 bootloader onto i9100G.
plus faulty usb, dead battery can do the trick aswell.
Related
Hey there,
I'm currently using a Galaxy S2, which is running stock Gingerbread 2.3.4 (no updates available through OTA nor Kies)
Baseband version: I9100XXKI1
Kernel version: 2.6.35.7-I9100XWKI4-CL575468
Buildnumber: GINGERBREAD.XWKI4
And now I would like to get CM9 on my phone. Although I read quite a lot of threads and tutorials, I still have some
unanswered questions left.
Of course I would like to get onto CM9 in the fastest (and safest) way possible, but I'm not really sure how I would accomplish this.
Is it rather better (or even possible) to just go from 2.3.4 directly to CM9? Could I first root it using insecure kernel or CF-Root and then use CWM Recovery to flash CM9? And would this process actually flash all the necessary things, like the correct firmware, kernel and bootloader?
Or should I use Odin to flash it to stock ICS first and then just follow the official full update guide from the Cyanogenmod Wiki (because it is written with the requirement of stock ICS running on the phone) ?
Please help me out with this, I'm thankfull for every answer that I get :laugh:
Follow the noob-proof instructions on the first post: http://forum.xda-developers.com/showthread.php?p=20841817 , and you can jump to cm9 from your current firmware, no need to go to stock ics first.
Sent from my GT-I9100 using Tapatalk 2
Just another question, as far as I understood it I don't need to root before applying the Resurrection Edition of CM9, right?
Night3 said:
Just another question, as far as I understood it I don't need to root before applying the Resurrection Edition of CM9, right?
Click to expand...
Click to collapse
No. It already includes CWM recovery. After you flash it, boot to CWM and flash the last cm9 update + gapps, wipe data/cache and reboot.
Make sure you put the .zip files on your sdcard first
Great thanks!
This seems to be easy as it can get
Oh and just one more thing, should I do a backup of some sorts? Just a little bit unsure, because then I would have to root first, do a backup and then would be able to the whole CM9 thing (I don't know if the rooted kernel could somehow interfere with the Resurrection Edition later on)
Night3 said:
Great thanks!
This seems to be easy as it can get
Oh and just one more thing, should I do a backup of some sorts? Just a little bit unsure, because then I would have to root first, do a backup and then would be able to the whole CM9 thing (I don't know if the rooted kernel could somehow interfere with the Resurrection Edition later on)
Click to expand...
Click to collapse
You can backup Contacts, Sms, call logs and installed apps without ROOT
Swyped from my Galaxy SII
Yeay, just flashed my phone and everything worked out smoothly and perfect, didn't have any problems at all
(I also didn't do a factory reset, is it necessary to that? Because right now there isn't any data left from before and I'm also not experiencing any problems whatsoever, so not really sure if I should do it and what it would do)
Thanks to everyone who posted here and helped me to finally flash my phone :good:
Night3 said:
Yeay, just flashed my phone and everything worked out smoothly and perfect, didn't have any problems at all
(I also didn't do a factory reset, is it necessary to that? Because right now there isn't any data left from before and I'm also not experiencing any problems whatsoever, so not really sure if I should do it and what it would do)
Thanks to everyone who posted here and helped me to finally flash my phone :good:
Click to expand...
Click to collapse
I'm not sure, but i think the NOOB proof method you used already wiped your data in the flashing process. So there is no need for you to do it again
Swyped from my Galaxy SII
Jokesy said:
I'm not sure, but i think the NOOB proof method you used already wiped your data in the flashing process. So there is no need for you to do it again
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, it does wipe automatically while flashing.
Sent from my GT-I9100 using Tapatalk 2
Ok...Yep im a newbie and yep ive looked in the forums but im getting confused..
Phone :Samsung Galaxy s2 i9100 running 4,0.4 kernal version XWLPT.
Ive rooted the phone using the method 1 on this guide.. http://forum.xda-developers.com/showthread.php?t=1746794
Now im looking to install cyanogenmod but i dont want a bricked phone so was wondering if anyone cleverer then me can give me a quick guide of how to install as all of the guides are getting confusing lol
Cheers for you help in advance...
Now that you have rooted your phone, you can install CWM. CWM (short for ClockworkMod) is a custom recovery menu which allows you to install any custom ROM packaged as a zip file. Refer to part 2 in the tutorial you followed to install CWM. I'd also flash another kernel such as Siyah (thanks to gokhanmoral) to make sure you can't brick your phone. That stock kernel you have is dangerous and you must get rid of it before doing the data wipe required to install CM.
Once you've done that, grab a CyanogenMod build and install it from the CWM recovery. You should of course place the zip file on your internal storage first. Make sure to follow the instructions here.
By the way, there's a "Q&A" section for this device, so please try to ask your questions there, they should get answered faster and by more people if you do that.
Cheers tydem..i thought the kernel in mine was prone to bricking...ill flash the one that you recommeded and see how it goes
just to add to that.. do we have to update Modems as well? can we update them?
No.
Yes.
xD3S1x said:
just to add to that.. do we have to update Modems as well? can we update them?
Click to expand...
Click to collapse
Hey everyone and Merry Xmas
I am new as i said before in all android world "coming from iphone jb and mess"
i got Galaxy s2 i9100G OS ics 4.0.3
i wanted to put jb rom on it Revolt one or whatever is good and stable now
so here what i know so far and should do
1st i learnt i must Root my device so i can add any rom
and to do that i must Download Odin then put my device in download mode and flash clockwork v 6.0.2.1 or something
then reboot my device
and put it on clock work mode then flash rom i want
is what i said correct ? or am i missing on anything and is just flashing clock work v 6 is equal to meaning of rooting my device ?
Ty.
Hitch3ns said:
Hey everyone and Merry Xmas
I am new as i said before in all android world "coming from iphone jb and mess"
i got Galaxy s2 i9100G OS ics 4.0.3
i wanted to put jb rom on it Revolt one or whatever is good and stable now
so here what i know so far and should do
1st i learnt i must Root my device so i can add any rom
and to do that i must Download Odin then put my device in download mode and flash clockwork v 6.0.2.1 or something
then reboot my device
and put it on clock work mode then flash rom i want
is what i said correct ? or am i missing on anything and is just flashing clock work v 6 is equal to meaning of rooting my device ?
Ty.
Click to expand...
Click to collapse
I don't suppose you actually read the installation instructions in post 1 of Revolt ROM?
ordinary geddvis
ctomgee said:
I don't suppose you actually read the installation instructions in post 1 of Revolt ROM?
Click to expand...
Click to collapse
i actually did
all it says if you coming from stock
just flash clockwork via odin when your device in download mode , reboot
then open clockwork recoverymode
then flash the rom after you put it on your internal card reboot
and ofc in middle the wipe data and resetting factory settings stuff
but i read many things about rooting n here n there made my confused
for example this topic
http://forum.xda-developers.com/showthread.php?t=2065581
made me think is clockwork is not what root mean ? or its somthing different
Hitch3ns said:
i actually did
Click to expand...
Click to collapse
That's funny, because no where on post 1 of Revolt ROM is ClockworkMod mentioned. But you mention it twice.
he did say "correct me!"
from sii xda-ded
gastonw said:
he did say "correct me!"
from sii xda-ded
Click to expand...
Click to collapse
True.
Hitch3ns said:
i actually did
all it says if you coming from stock
just flash clockwork via odin when your device in download mode , reboot
then open clockwork recoverymode
then flash the rom after you put it on your internal card reboot
and ofc in middle the wipe data and resetting factory settings stuff
but i read many things about rooting n here n there made my confused
for example this topic
http://forum.xda-developers.com/showthread.php?t=2065581
made me think is clockwork is not what root mean ? or its somthing different
Click to expand...
Click to collapse
I guess post 1 of Revolt ROM DOES link to this guide to root an I9100G, which DOES mention ClockworkMod. However, this also contains very clear and concise instructions.
ctomgee said:
That's funny, because no where on post 1 of Revolt ROM is ClockworkMod mentioned. But you mention it twice.
Click to expand...
Click to collapse
If coming from a Samsung Stock ROM:
1-Read this article on How to root your Samsung Galaxy S2 I9100G (Link) http://forum.xda-developers.com/showthread.php?t=1679778
2-Wipe Data
3-Wipe Cache
4-Wipe Dalvik-Cache
5-Format /system
6-Flash ROM
7-Wipe Cache / Dalvik-Cache
8-Enjoy ReVolt ROM !!
that's whats said .. and what confusing me is not all steps is 1st one which is rooting .
in some videos it doesnt in clude to talk about root.zip
and other guides doesnt say anything about it , is that normal ?
you can alway watch a youtube rooting ics vid while keeping xda on another tab.
sometimes it is better to graphic something that you read.
let us know if you pull it off.
from sii xda-ded
Hitch3ns said:
in some videos it doesnt in clude to talk about root.zip
and other guides doesnt say anything about it , is that normal ?
Click to expand...
Click to collapse
There are literally dozens of ways to root your device. It's pretty simple, dude. Follow one set of directions. Don't worry about other directions that are not the same. Hell, the guide linked in the first post of Revolt ROM has three options just in that one post.
I think you're getting confused because nothing explains where the root access is gained.
It is contained within the custom kernel which also gives you clockworkmod. Cwm is a custom recovery that has many more features than stock.
Sent from my GT-I9100 using xda app-developers app
MarkyG82 said:
I think you're getting confused because nothing explains where the root access is gained.
It is contained within the custom kernel which also gives you clockworkmod. Cwm is a custom recovery that has many more features than stock.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
you got me !!! now i understand ty
not its time to read about different roms and which is better and which issues it got
ty for help everyone
Hitch3ns said:
you got me !!! now i understand ty
not its time to read about different roms and which is better and which issues it got
ty for help everyone
Click to expand...
Click to collapse
dont forget to nand backup (from cwm) before you flash new rom
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
There are a lot of stable roms. Do you want touchwiz based or AOSP based? I don't have an opinion on AOSP roms because I've barely used any of them.
For Samsung based roms, Shoman94's roms are very stable and popular. That's what I use as my daily driver. For ICS, use SHOstock2, but for the latest JB use SHOstock3.
Vintage144 said:
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
Click to expand...
Click to collapse
When you flash a new ROM you will have to wipe. Also that's caused by using a foreign kernel aka one from galaxys2root.com
Sent from my GS4 running CM11 Kandy Kane
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Vintage144 said:
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Click to expand...
Click to collapse
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Thank you, I got the siyah kernel from a thread here,when I first got the phone (off ebay )it did in fact have the wrong kernel,I used entropy flash back to get back,I guess I did something else,but I will use one of the roms you mentioned ,glad we have you here ,I've been messing with wp7 the last few years and finally getting back to android (cept been playing with boot loaders in a500)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Strangely enough ,o couldn't get restore to work from cwm BUT there was a cwm app I had and when it came back all my backups were there I went back to one to get back to where I was,will flash the roms you talked about for sure at 20% now so will have to wait
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Click to expand...
Click to collapse
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
beneff said:
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
Click to expand...
Click to collapse
Please use the guide "how to flash custom binaries without incrementing the flash counter" which is a link in my signature.
Sent from my SGH-I777 using xda app-developers app
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Vintage144 said:
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
creepyncrawly said:
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
Click to expand...
Click to collapse
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
beneff said:
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
Click to expand...
Click to collapse
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Thank you very much creepy ,your page is awesome and your advice the shostock rom is great
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Click to expand...
Click to collapse
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
beneff said:
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
Click to expand...
Click to collapse
Any
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Any
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Thanks a million.
Hey everyone,
Sorry if the Answer was staring me in my face but I'm not sure about upgrading to the CyanogenMod because of the superbricking I might get..
If any help can be given as to whether I am safe to do it, it will be much appreciated, My android version is 4.0.4, Build number imm76D.XWLPT.
I have just rooted it with XWLPW-ROOT-CWM6, and It seems to have rooted fine.
Will be much appreciated if I can get any help as to whether I can Flash it with CyanogenMod and everything will be fine..
Thanks again
EDIT: Yeah I just realized about having the Superbrick bug, I must have a kernel that is not liable to bricking, I rooted it with PhilZ touch 3 and when I go into recovery mode it says CWM Base version: 6.0.1.8 at the bottom, Am I safe from the bug?
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Donnie Sins said:
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Click to expand...
Click to collapse
Thanks alot dude!
EDIT: Sorry, do you know which CyanogenMod I should flash? I just want to upgrade to one that is fully working, but there are many in the index and I dont know which one to flash :s THANKS!!
and If I dont do a wipe? wont it be stuck at boot as the Guide says it will?
I highly recommend you read the discussion thread for the version of CM you're wanting to try in General section. So you can get a handle on other people's experiences with it, bugs/flaws/annoyances/features/etc. I never flash a rom without reading the first 10 pages of those threads & the last two weeks or so worth of posts so I know what I'm in for.
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Donnie Sins said:
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Click to expand...
Click to collapse
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
AndroidTerminator said:
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
Click to expand...
Click to collapse
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Donnie Sins said:
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Click to expand...
Click to collapse
really? I'm running a custom kernel because I rooted my phone right..?
AndroidTerminator said:
really? I'm running a custom kernel because I rooted my phone right..?
Click to expand...
Click to collapse
You're running Philz-kernel aren't you?
Sent from the Matrix
Donnie Sins said:
You're running Philz-kernel aren't you?
Sent from the Matrix
Click to expand...
Click to collapse
Well, I was trying to root my phone so I don't think so, now that I think of it no, its only root and clockwork recovery mode thingymajig because file size only 7mb so if it was only root, my build number and everything is as same as before ^-^,
That's what I am so confuzzled about, I need to downgrade to a custom rom that must come with a custom kernel right to be able to upgrade to cyanogen right...? otherwise ill brick it?
No. Make sure you flash a custom kernel (for example Siyah) with Odin. Then there's no need to flash other firmware first before upgrading. Just wipe your device in CWM (after the back up), and flash the rom you want.
Sent from the Matrix
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
AndroidTerminator said:
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
Click to expand...
Click to collapse
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
TheATHEiST said:
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
Click to expand...
Click to collapse
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
AndroidTerminator said:
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
Click to expand...
Click to collapse
Btw, if you have any apps/appdata you need to restore after wipe you can restore them from your nandroid backup using appextractor.