this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
There are a lot of stable roms. Do you want touchwiz based or AOSP based? I don't have an opinion on AOSP roms because I've barely used any of them.
For Samsung based roms, Shoman94's roms are very stable and popular. That's what I use as my daily driver. For ICS, use SHOstock2, but for the latest JB use SHOstock3.
Vintage144 said:
this is my wifes phone (I have a Note) I want to know what rom I can go to that is very stable , prefer ics :
Samsung SGH-I777
2.3.6
I777UCKK6
2.3.35.14
GINGERBREAD.UCKK6
sorry but I dont generally mess with her phone , she does have root and cwm touch 5.5.0.4 . There seems to be a wifi problem it turns on and then off , never sticking , I suppose wiping all might help , I hate seeming naive but when I mess with my own phone its all a chance , I dont want to just do that with hers!
Click to expand...
Click to collapse
When you flash a new ROM you will have to wipe. Also that's caused by using a foreign kernel aka one from galaxys2root.com
Sent from my GS4 running CM11 Kandy Kane
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Vintage144 said:
Siyah-v2.6.14-att-CWM , apparently I wiped it again , back to square one (she aint gonna be happy) , this is it still wont recognize wifi ?? what else can I do ,? I want to flash a rom with this keneral can I flash any of the roms you mentioned? will that fix my wifi? should I try to re-install this kernel , or use entropys? I hat to sound new , but I dont have this problem on the note or my a500 , I feel lost in here!
Click to expand...
Click to collapse
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Thank you, I got the siyah kernel from a thread here,when I first got the phone (off ebay )it did in fact have the wrong kernel,I used entropy flash back to get back,I guess I did something else,but I will use one of the roms you mentioned ,glad we have you here ,I've been messing with wp7 the last few years and finally getting back to android (cept been playing with boot loaders in a500)
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Strangely enough ,o couldn't get restore to work from cwm BUT there was a cwm app I had and when it came back all my backups were there I went back to one to get back to where I was,will flash the roms you talked about for sure at 20% now so will have to wait
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
If I remember correctly, I think that version of the Siyah kernel was put out by zedomax on GalaxyS2Root website. That kernel combined with UCKK6 was always a problem. In fact, that package was always a problem.
Anyway, the kernel has ClockworkMod Recovery. You should decide on a good rom, as discussed above, download the zip file and use usb to transfer it to the sdcard on the phone, then boot into recovery, perform a wipe data/factory reset, and flash the rom. It doesn't matter that you are on Gingerbread right now. You can flash either an ICS or JellyBean rom because the package will contain the complete system and kernel and modem, everything.
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Enter recovery by holding down all three of vol + vol - and power buttons continuously until it boots into recovery. If it won't boot into recovery, then it might be a bad flash.
Click to expand...
Click to collapse
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
beneff said:
Hi friend, pls am very new here and what i have at d moment only sgh-i777 is I777UCKH7-Root-No-BL.7z that i got from your signature.
Pls i want to upgrade to Shostock3 jb, apart from d shostock Rom what other installations do i need on my phone to enable me flash d shostock3 Rom successfully?
Thanks in anticipation.
Click to expand...
Click to collapse
Please use the guide "how to flash custom binaries without incrementing the flash counter" which is a link in my signature.
Sent from my SGH-I777 using xda app-developers app
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Vintage144 said:
Should i care about theflash counter, i mean i own this phone outright and wont be giving it to samsung if it goes wrong [no warranty]
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
creepyncrawly said:
It is exactly that, a counter, and the only purpose of it as far as we know is warranty protection, so I would say no, it's not important. On the other hand, most folks don't like the splash screen with the yellow triangle, but you can remove that easily enough if you still get it on boot.
Click to expand...
Click to collapse
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
beneff said:
I don't also have warranty so the flash counter is not my concern here, getting Shostock3 JB running on my phone is. pls my question is are there any other packages apart from the Shostock3 Rom that i would need to download to enable me flash the Shostock3 Rom?
What i have at the moment is the "I777UCKH7 Return/Unbrick to Stock with Root" that i downloded thru your signature. Dose this contain everything i would be needing to successfully flash the Shostock3 Rom?
Thank you.
Click to expand...
Click to collapse
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Thank you very much creepy ,your page is awesome and your advice the shostock rom is great
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
creepyncrawly said:
No. You also need to install a custom kernel that contains ClockworkMod Recovery. Please read through the guide "How to install custom firmware without incrementing the flash counter" (link in sig) because it will help you see how things fit together.
Click to expand...
Click to collapse
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
beneff said:
Thanks for your time as always, any suggestion on a custom kernel that contains ClockworkMod Recovery?
Click to expand...
Click to collapse
Any
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Any
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Thanks a million.
Related
Hi I want to install latest CM9 nightly, As Im installing first time, I just want to make sure that my phone is running firmware lower than XXLPH though it looks lower but cant judge, I went through official CM9 Thread I can follow all the steps except this one. And also I have already rooted my device using
GT-I9100_THR_I9100JPKJ2_I9100OJPKJ1_I9100XXKI4 (firmware) and
CF-Root-SGS2_XW_XEF_KJ2-v4.4-CWM4.tar (root kernel)
I still havent installed any custom rom yet.
Here is my current phone details:
GT-19100
Android 2.3.5 (STOCK)
Baseband 19100XXKI4
Kernel 2.6.35.7-I9100XWKJ2-CL676699root
____________________________________________
I thought my firmware is higher than XXLPH so I found this guide to ugrade to ice cream firmware first:
http://androidbeast.com/937/tutoria...oid-ice-cream-firmware-on-galaxy-s2-gt-i9100/
then root it with this kernel :
http://androidbeast.com/948/root-samsung-galaxy-s2-cf-root-kernel-odin/
Now I need your advice that weather should I continue following above guide or should I start flashing CM9 firmware staright away ??
now that you are rooted and on ics, you can then follow the instructions in CM9 thread.
Flash odin version first and then update to latest build from cwm recovery
codeworkx said:
If you're a bloody noob and getting confused by following simple instructions, go down and read about using the noob-proof ODIN method.
First time installing CyanogenMod 9 to your Galaxy S II, or coming from another ROM:
- READ FAQs: http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100:Frequently_Asked_Questions
- Make sure you're running ICS bootloaders lower than LPH: Download (flash as PDA with odin or extract and $ sudo heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin)
- make sure you're running a proper working CWM like the one from CM7
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 9:
- Copy CM9 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Wipe cache partition and dalvik-cache
- Reboot
Using the noob-proof ODIN method:
- Download CM9 Resurrection Edition
- Download GApps and put it onto your internal sdcard
- Open Odin
- Choose cm-9-XXXXXXXX-ODIN-galaxys2.tar.md5 as PDA
- Boot your phone into download mode
- Connect your device via usb to your computer
- Wait till Odin has fully recognized your phone
- Hit the start button and wait till the flash process is finished
- Device boots automatically into recovery
- Flash GApps, wipe cache and dalvik-cache
- Reboot into CM9
- Follow above steps to update CM9 to lastest available version (Upgrading from earlier version of CyanogenMod 9)
Click to expand...
Click to collapse
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
loverdude said:
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
Oh i get it! First i should use noob proof method then i should use "Upgrading from earlier version of cm 9" regardless of what firmware i currently have am i right?
Sent from my GT-I9100 using XDA
ctomgee said:
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
Click to expand...
Click to collapse
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
loverdude said:
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
BobPowers said:
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
Click to expand...
Click to collapse
Hey i succeeded!!!! Im soooo happy! first I followed your website which u gave me to install Resurrection Rom then I upgraded to cm9 through zip file CWM recovery. thanks a bunch man
ctomgee said:
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Click to expand...
Click to collapse
Actually on that post I wasn't sure which ROM was based on what firmware but i came to know from users like you and I got clear idea from you all before that in the mean time, i was gathering info through various guides, videos from weeks and merged those ideas in to one then I decided to install CM9 as it looks similar to new galaxy nexus phone and this is exactly what I wanted my phone to look and behave like. Now I am happy and satisfied.
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
kami2k said:
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
Click to expand...
Click to collapse
Man... why did you the touch the bootloader first? never play with it unless you know whats gonna happen! and about noob installation guide for CM9 is not clearly noobproof, I completely did all installation with clockworkmod recovery, I used ODIN only once for rooting my phone after that i never used it as I was very very cautious and careful about each and everything bit i was doing.
But never loose hope, you never know what kind of brick you have you have two ways to unbrick your phone,
1.Using USB jig, search it on XDA, Google, Youtube
2.JTAG Service, This is the ultimate solution if your phone is completely Hard bricked but for this you have to send your device to them.
here is their demonstration:
http://www.youtube.com/watch?v=kQdTi2vgMmY
its written in the cm9 installation to do the boot-loader with ODIN, that is what i do
oh bhai....... make sure you had i9100 not the i9100G,
remove battery and see if you can get download mode.
im running cm9 on new bootloader unless intratech still removes them from his stock ROm as he used too..... i came from stock LPS to cm9
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
kami2k said:
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
Click to expand...
Click to collapse
you dont get it i9100G is also S2 and virtually same. you have to see under the batter if its written i9100 or i9100G.
because thats what would happened if you flash i9100 bootloader onto i9100G.
plus faulty usb, dead battery can do the trick aswell.
Just moved from iPhone to i777, wanted to get ICS, but eneded up bricking my first phone by installing something meant for i9000. At that time I didn’t know Galaxy S2 has variants, just searched for S2 and got burned. My fault…..should have understood better.
I want to do it right this time so I have been reading about i777, ROMs, kernels, CWM.
I want to put SHOStock or CM9 ROM.
I know where these ROMs are and how to flash them using CWM.
But that’s where my confusion starts, that there are just too many sources and options and I don’t know which one is right.
So please advise.
How do I root?
Using this? It has multiple options
http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
or this ?
http://galaxys2root.com/galaxy-s2-root/how-to-root-att-galaxy-s2-sgh-i777/
Which kernel to use
The one mentioned in SHOStock thread #3 post the Cherry Picker Kernel for i777 or Entorpy? Siayh
How do I get CWM on these, isn’t recovery part of the kernel or do I flash It separately or may be use ROM Manager, once rooted.
Modem? What does it do? Is it for phone or wi-fi and how do I know which one to use.
My phone’s data
SGH-i777
Android 2.3.6
Baseband I777UCKK6
Kernel 2.6.35.7
Build#
GINGERBREAD.UCKK6
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
First of all thanks for responding.......
Is there a relation between which ROM will work with which Kernel, I may be wrong but I got the impression, depending on which ROM you are putting, you should have a kernel that supports it.
Also it seems like, ShoStock has its own variation of entropy, named cherry picker.
Thanks.......
mattdm said:
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
Click to expand...
Click to collapse
Agree with matts post just like to add that you can get the free mobile odin here http://forum.xda-developers.com/showthread.php?t=1347899 to flash the kernel so you dont spend any money. download file, extract, move apk to sdcard, use root or file explorer locate and run the apk. follow instructions on flashing a kernel
Thanks a ton got it.....
aj9507 said:
Agree with matts post just like to add that you can get the free mobile odin here http://forum.xda-developers.com/showthread.php?t=1347899 to flash the kernel so you dont spend any money. download file, extract, move apk to sdcard, use root or file explorer locate and run the apk. follow instructions on flashing a kernel
Click to expand...
Click to collapse
Ah yes, thanks. I always forget to mention that.
Itsme1967 said:
First of all thanks for responding.......
Is there a relation between which ROM will work with which Kernel, I may be wrong but I got the impression, depending on which ROM you are putting, you should have a kernel that supports it.
Also it seems like, ShoStock has its own variation of entropy, named cherry picker.
Thanks.......
Click to expand...
Click to collapse
Sometimes there is, but it seems like most of the ICS kernels are interchangeable. Just try out each kernel for a few days...once you have CWM, switching kernels is no big deal. When switching kernels, though, it's always wise to flash jivy's Kernel Cleaning Script just before flashing a new kernel.
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Itsme1967 said:
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Click to expand...
Click to collapse
u can use mobile odin or cwm but its just a matter of preference you just had to use mobile odin at first to acquire a cwm enabled kernel but pretty much you can flash everything in cwm as long as its specified to be cwm flashable zip kernels roms and modems and such
edit: the free mobile odin only lets you flash kernels btw its the premium version that lets you do everything without going to recovery
hope to help
Itsme1967 said:
Can you use CWM to flash kernels as well ? I thought they always have to be done using ODIN.
May be I underestimated CWM, I thought it was for ROMs and zips only.
Click to expand...
Click to collapse
You don't seem to have a firm grasp on all this. Maybe you should do some more reading before going further...
Anyway, here's a brief explanation:
A kernel is the underlying core of the operating system; it is how the OS interacts with the hardware.
A rom (the proper term is actually firmware, but nobody uses it) is basically the whole user interface; it's the part of the OS you see. When you flash a rom, you're flashing everything, including a kernel.
Like I said before, you never want to flash a custom kernel using Odin. Doing so will trip the phone's flash counter, and this will show up if you ever have to take the phone in for warranty stuff.
The reason it's ok to use Odin to flash the stock with root package is that it comes with the stock kernel, not a custom one. Basically, once you're rooted, you shouldn't touch Odin again unless its to recover from a brick. Basically everything else can be done in CWM.
Yes I am still reading & trying to get a grip on it.
So first I will root it, then flash kernel using Mobil Odin
Then get in CWM mode ad flash ROM, which will come with the kernel i.e. cherrypicker kernel and modem I need.
Yes one part I have understood very well is that use CWM as much as one can to avoid committing mistakes by flashing something that doesn't belong.
Sorry for asking so many qs., I wish I could understand this faster.....
Thanks again........
Itsme1967 said:
Yes I am still reading & trying to get a grip on it.
So first I will root it, then flash kernel using Mobil Odin
Then get in CWM mode ad flash ROM, which will come with the kernel i.e. cherrypicker kernel and modem I need.
Yes one part I have understood very well is that use CWM as much as one can to avoid committing mistakes by flashing something that doesn't belong.
Sorry for asking so many qs., I wish I could understand this faster.....
Thanks again........
Click to expand...
Click to collapse
Yeah no problem. I would suggest that you wait a while before doing this. Read through all the stickies and guides to can find, and get more familiar with everything. Then after a couple days, go for it.
Crap, I'm starting to think I should not but a sg2....
Sent from my HTC Glacier using XDA
rpomponio said:
Crap, I'm starting to think I should not but a sg2....
Sent from my HTC Glacier using XDA
Click to expand...
Click to collapse
Why?
I remember my first flash....
Sent from my SGH-I777 using xda premium
jthatch12 said:
I remember my first flash....
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I remember mine, read and re read the guides 3 to 5 times before I even touched my phone that I had for only three hours before I got bored with stock lol. To op don't be afraid man this forum is here to help and the gs2 is a great phone
Sent from my SGH-I777 using XDA
:*) nice ! Love these kinds of threads.
mattdm said:
Why?
Click to expand...
Click to collapse
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Sent from my HTC Glacier using XDA
rpomponio said:
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Sent from my HTC Glacier using XDA
Click to expand...
Click to collapse
Wifi works fine on ics
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Nick281051 said:
Wifi works fine on ics
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
So I just need to go threw the root process, make a back up, and when I flash the ics ROM I choose, my wifi will be back?? Sorry for the noobish questions, I plan on rooting my sg2 as soon as I get home from buying it and I don't want to brick it... Any help is much appreciated!!! Thank you in advance!
Sent from my HTC Glacier using XDA
rpomponio said:
Can you send me a guide please, I have been reading for a couple days now and alot of what I see is wifi breaks after root. I am buying a sg2 in about 2 weeks so plan on seeing me around. I want to root it and run ics but I need my wifi... Any help is greatly appreciated!! Thank you in advance!!!
Click to expand...
Click to collapse
mattdm said:
Here's what you need to do:
1. Use Odin to flash stock UCKH7 with Root, available here. Be aware that doing this will require a full wipe, so do what you can to back up your sms/mms/contacts and other data. READ EVERY STEP CAREFULLY. Do not flash a kernel with Odin.
2. Now that you have root access, download Mobile Odin from the Play Store. Use it to flash either Entropy's DD or Siyah. This will install CWM Recovery.
3. Boot into CWM Recovery and make a nandroid backup.
4. Use CWM to flash SHOStock or CM9.
Click to expand...
Click to collapse
You don't need any more of a guide than that. Don't worry about breaking wifi, that isn't a problem on any of the popular roms.
If you want a Samsung based ICS rom that works really well, I suggest ShoStock2. If you want an AOSP based rom, most people suggest AOKP. I haven't tried it personally.
rpomponio said:
So I just need to go threw the root process, make a back up, and when I flash the ics ROM I choose, my wifi will be back??
Click to expand...
Click to collapse
You're wifi won't go away in the first place.
Hello.
I just rooted my ATT GS2 I777 phone using a method over at galaxys2root.com. i then installed the latest kernel 3.5.1 Sayah WITHOUT mic swap. Can someone please tell me the difference between WITH and WITHOUT mic swap and what it is exactly?
I'm looking for a rom to install now and seem to be having issues finding one that isn't based off the 9100 phone even though they are listed in the I777 forums. I would like to install Serendipity9 or Galaxy Nexus ROMs but not sure if I needed the 3.5.1 WITH mic swap rom or not.
Please help.
Thanks.
With Without mike swap is for I777 stock roms and custom roms made from I777 stock as base, ie Semi. Mike swap is for roms made from I9100 base, or aosp roms.
It doesn't really matter though, because when you install a custom rom, it will also install the kernel that comes with the rom. If it doesn't come with your preferred kernel, then you can flash the kernel or your choice after you flash the rom of your choice.
I think you meant to say for your first word is "Without", correct?
I'm going to try to install Serendipity9 even though I can't find anything about the change log to see what kernel is included.
jackal2001 said:
I think you meant to say for your first word is "Without", correct?
I'm going to try to install Serendipity9 even though I can't find anything about the change log to see what kernel is included.
Click to expand...
Click to collapse
Yes. Fixed it, lol.
The kernel is CherryPicker. See here. I think it's been a while since the rom has been updated. I think Mikey is working on something else now.
I did get the Serendipity 9.4 installed and then ran Siyah 3.5.1 Kernel (with mic swap) and so far everything seems to be working ok.
Thank you for your help.
I would flash something else asap.. Here's a hint, anything it our development section!
Clay
Team Pirate
Sent from my PINK SGH-I777
Please don't talk secret code. I don't have my decoder ring.
If there is something wrong with something I used, please let me know.
jackal2001 said:
Please don't talk secret code. I don't have my decoder ring.
If there is something wrong with something I used, please let me know.
Click to expand...
Click to collapse
There is no code... If you can't understand that you shouldn't be messing with your phone
jackal2001 said:
I just rooted my ATT GS2 I777 phone using a method over at galaxys2root.com
Click to expand...
Click to collapse
Flash something ASAP and get off of that sh¡t - and NEVER use anything from that site again.
It's for your own good.
Clay
Team Pirate
Sent from my PINK SGH-I777
Not sure what you are talking about.
I rooted my phone using their method (odin and siyah kernel). yes now my phone boots saying I9100 and the yellow triangle.
I then Installed Serendipity 9.4 Rom from their official site.
I then Installed Siyah Kernel 3.5.1 from here.
I didn't want to brick my phone by rooting and there are a lot of methods to do so and a lot of old information out on the forums.
What is wrong with what I did?
I plan on going to Jellybean and the latest siyah when the time comes when more stable.
I did see this post over here:
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
I was thinking about doing the below and following the instructions, but no description was there for what this actually did and I'm new to all this.
Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders
I would appreciate it if you can point me in the right direction on how to properly put the phone back and then how to properly root it again.
Well basically this site had a lot of great info and awesome devs. But other sites take their stuff, post links to download the roms and never give proper credit. As far as what yer asking, are u asking how to return to stock? If so, just Google XDA i777 download repository. Here's a link to it. http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46 I would go with the stock rooted 2.3.4 without boot loaders. Flash it with Odin. Or mobile Odin pro.
Sent from my SGH-I777 using Tapatalk 2
I'm asking (since they are telling me to get this **** off my phone) how to get it properly rooted and then go from there.
So if I just run Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders, that will properly put my phone back to factory + being rooted. Correct?
The only issue I have with my phone is it boots with an I9100 screen instead of the I777 screen. If I run the above with that properly show the I777 screen or not?
I'm guessing I have some bootloader on my phone since it is showing the I9100 screen??? That is why you guys are telling me to get that off there???
jackal2001 said:
Not sure what you are talking about.
I rooted my phone using their method (odin and siyah kernel). yes now my phone boots saying I9100 and the yellow triangle.
I then Installed Serendipity 9.4 Rom from their official site.
I then Installed Siyah Kernel 3.5.1 from here.
I didn't want to brick my phone by rooting and there are a lot of methods to do so and a lot of old information out on the forums.
What is wrong with what I did?
I plan on going to Jellybean and the latest siyah when the time comes when more stable.
I did see this post over here:
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
I was thinking about doing the below and following the instructions, but no description was there for what this actually did and I'm new to all this.
Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders
I would appreciate it if you can point me in the right direction on how to properly put the phone back and then how to properly root it again.
Click to expand...
Click to collapse
There's nothing wrong with what you did. You rooted your phone and installed a custom firmware without causing any problems. If you are satisfied with your phone as it is, do not flash back to stock just because of some of the posts here.
There are problems with GalaxyS2Root.com. Some of the files that are available there cause people to brick their phones, or have other problems. When the name comes up, people here react to it. That accounts for some of the posts here. But in your case, since you had no problems, and your custom flash went ok as well, not to worry.
Because you flashed a custom kernel using Odin when you rooted with the GalaxyS2Root method, you incremented the flash counter, which also causes the I9100 boot screen with the yellow warning triangle. That can be cleared with a USB jig, or with the application Triangle Away by codeworx which can be used only on ICS or above.
---------- Post added at 08:54 PM ---------- Previous post was at 08:49 PM ----------
jackal2001 said:
I'm asking (since they are telling me to get this **** off my phone) how to get it properly rooted and then go from there.
So if I just run Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders, that will properly put my phone back to factory + being rooted. Correct?
The only issue I have with my phone is it boots with an I9100 screen instead of the I777 screen. If I run the above with that properly show the I777 screen or not?
I'm guessing I have some bootloader on my phone since it is showing the I9100 screen??? That is why you guys are telling me to get that off there???
Click to expand...
Click to collapse
You did not flash I9100 bootloaders. Samsung was lazy, when they made the firmware for I777 they didn't update that image, so it still says I9100.
Oh, and I would suggest that you avoid GalaxyS2Root.com in the future for your own peace of mind.
Creepy,
Thanks again. I did send you a PM as well.
I don't know what a bootloader is and thought maybe the cause of the I9100 screen is due to a bootloader which may cause problems or something for future installs of Kernels and ROMs.
Since my phone is already rooted I plan to just continue to use this site for ROMs and Kernels. I'm still learning.
jackal2001 said:
Creepy,
Thanks again. I did send you a PM as well.
I don't know what a bootloader is and thought maybe the cause of the I9100 screen is due to a bootloader which may cause problems or something for future installs of Kernels and ROMs.
Since my phone is already rooted I plan to just continue to use this site for ROMs and Kernels. I'm still learning.
Click to expand...
Click to collapse
Yeah absolutely man! Sorry I was confused about your question. Thought u wanted to return to stock just to start over fresh. Didn't mean to confuse u or try to cause you any additional work. If it isn't broke, like creepy said, no need to do anything. good luck!
Sent from my SGH-I777 using Tapatalk 2
Thanks but it was the other guys that had me worried as they said to get rid fo that immedately.
I would start over fresh if needed but it looks like I'm ok anyway. I'll move to Siyah 4.1.1( or later) and Jellybean at a later time when more stable I guess.
Hey everyone,
Sorry if the Answer was staring me in my face but I'm not sure about upgrading to the CyanogenMod because of the superbricking I might get..
If any help can be given as to whether I am safe to do it, it will be much appreciated, My android version is 4.0.4, Build number imm76D.XWLPT.
I have just rooted it with XWLPW-ROOT-CWM6, and It seems to have rooted fine.
Will be much appreciated if I can get any help as to whether I can Flash it with CyanogenMod and everything will be fine..
Thanks again
EDIT: Yeah I just realized about having the Superbrick bug, I must have a kernel that is not liable to bricking, I rooted it with PhilZ touch 3 and when I go into recovery mode it says CWM Base version: 6.0.1.8 at the bottom, Am I safe from the bug?
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Donnie Sins said:
You're safe as long as you don't perform a wipe from stock recovery in 4.0.4 (and not all phones have an insane chip). So yes, you can flash CM.
Sent from the Matrix
Click to expand...
Click to collapse
Thanks alot dude!
EDIT: Sorry, do you know which CyanogenMod I should flash? I just want to upgrade to one that is fully working, but there are many in the index and I dont know which one to flash :s THANKS!!
and If I dont do a wipe? wont it be stuck at boot as the Guide says it will?
I highly recommend you read the discussion thread for the version of CM you're wanting to try in General section. So you can get a handle on other people's experiences with it, bugs/flaws/annoyances/features/etc. I never flash a rom without reading the first 10 pages of those threads & the last two weeks or so worth of posts so I know what I'm in for.
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Donnie Sins said:
I agree. And you always have to perform a full wipe if you change firmware.
Sent from the Matrix
Click to expand...
Click to collapse
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
AndroidTerminator said:
yes thank you I will, but do I wipe my phone before I install CM? or..? during it..? I'm scared of this superbricking ^-^, I have flashed my GS1 before with no problems, but problems arose and I've been out of the game for a while, and have forgotten phones and roms etc for quite a bit ^-^
THANKS AGAIN
Click to expand...
Click to collapse
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Donnie Sins said:
I assume you've read guides about how to flash a rom? Copy the zip-file to your phone, back up, wipe and flash.
You don't have to be scared of this superbrick bug because you're already running a custom kernel.
Sent from the Matrix
Click to expand...
Click to collapse
really? I'm running a custom kernel because I rooted my phone right..?
AndroidTerminator said:
really? I'm running a custom kernel because I rooted my phone right..?
Click to expand...
Click to collapse
You're running Philz-kernel aren't you?
Sent from the Matrix
Donnie Sins said:
You're running Philz-kernel aren't you?
Sent from the Matrix
Click to expand...
Click to collapse
Well, I was trying to root my phone so I don't think so, now that I think of it no, its only root and clockwork recovery mode thingymajig because file size only 7mb so if it was only root, my build number and everything is as same as before ^-^,
That's what I am so confuzzled about, I need to downgrade to a custom rom that must come with a custom kernel right to be able to upgrade to cyanogen right...? otherwise ill brick it?
No. Make sure you flash a custom kernel (for example Siyah) with Odin. Then there's no need to flash other firmware first before upgrading. Just wipe your device in CWM (after the back up), and flash the rom you want.
Sent from the Matrix
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
AndroidTerminator said:
Thanks, thing is a lot of things are outdated like the guides, do you know if I can use the latest odin which is out that apparently is for the S3? I've spent two days trying to do research on this and im failing quite badly :'(
Click to expand...
Click to collapse
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
TheATHEiST said:
Make sure you have kies installed or at least the drivers.
Reboot into download mode
Run ODIN 1.85
Flash Siyah kernel (.tar) via PDA section
Boot into recovery run backup
Wipe data/factory reset
Flash CM zip file.
Click to expand...
Click to collapse
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
AndroidTerminator said:
YES, [email protected][email protected][email protected]! so so much, easy when explained like that, I'm knowledgeable and pick things up quickly but you have made this easier for me, thanks for the help DD: <3
Click to expand...
Click to collapse
Btw, if you have any apps/appdata you need to restore after wipe you can restore them from your nandroid backup using appextractor.
I have flashed paranoidandroid 3.15 on my galaxy s3 a couple weeks ago, aside the occasional screen that win't turn on I haven't had any problem, but I set my mind on flashing a new kernel in order to be able to change thez governor. I tried to flash air kernel on, I did exactly what I was told: Boot into recovery, clear cache/delvik, installed kernel from sd card, and rebooted. But after the phone being rebooted, I still had the stock kernel.
My question is, why did this happen, and how do I fix it?
All help is appreciated
what recovery? link to the kernel?
Glebun said:
what recovery? link to the kernel?
Click to expand...
Click to collapse
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
vonniel said:
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
Click to expand...
Click to collapse
Kernel is for nexus s not galaxy s3
Sent from my GT-I9300 using xda premium
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Glenbun. Only mismatched, corrupted, or missing boot loaders can kill a phone.
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Glebun said:
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Click to expand...
Click to collapse
Glebun u have a point, even other incompatible components of recovery zip packages can brick the phone.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Glebun said:
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Click to expand...
Click to collapse
Wow, I feel so dumb ^^' I'll be more careful next time around.
What kernel would you recommend for me?
I recommed stock mb5 or speedmod k2-12 kernels for you
Bahadirafro said:
I recommed stock mb5 or speedmod k2-12 kernels for you
Click to expand...
Click to collapse
Well, I don't really know either of them, I don't mind stock, but I want to change things, sometimes it just isn't up for the task, or uses up battery when I would rather it didn't, without even knowing what they do, and looking around, I found the perseus kernel, I would like some opinions on the kernel, I would be very grateful if you told me if it fits me, if it's compatible with ParanoidAndroid, and finally if you have a better suggestion for a kernel.
http://forum.xda-developers.com/showthread.php?t=1691401
read the first post of the thread to find out if it's compatible with your ROM.
and try it to see if it suits you
If I'm running TWRP can I still download kernels that say they are meant for CWM?
yes