Could anyone upload this please, i flashed the i9100 one to get rid of the warning triangle but now my phone thinks its a i9100. I did not not it would change everything.
Anyone have a solution for this ?
Have a look at the files in my Dropbox. Original Zimage for BVKI3(Orange Uk) and CF-root Zimage. Put the Zimage on the root of your phone sd card.
Flash from HC-KTool or CWM
Original Kernel
http://dl.dropbox.com/u/34590193/Ori...0Kernel/zImage
CF-Root Kernel
http://dl.dropbox.com/u/34590193/CF-...0Kernel/zImage
Saull said:
Could anyone upload this please, i flashed the i9100 one to get rid of the warning triangle but now my phone thinks its a i9100. I did not not it would change everything.
Anyone have a solution for this ?
Click to expand...
Click to collapse
You are one lucky dude.Flashing the bootloader of a different device and surviving to tell the tale,albeit with a little personality crisis?Wicked.
Well,wait for the opinion of someone more experienced than me,but I think that flashing the normal I9100p bootloader will sort things out.
bootloader =/= kernel.
Sorry was rushing out this morning. Try here...
http://skywanker.net/Default.aspx
Then head to the download page.
Thanks for the help so far.
Some how I have now bricked my phone or semi bricked should I say, I was flashing a old gingerbread back up from ics which worked but when I tried to restore my ics backup it failed. So I used CheckFUS downloader and got the latest fw for my device, put my phone into download mode and plugged into my pc, it come up as COM:4 in a yellow box but I got a odin fail, I can only boot into download mode. Any ideas ? im reinstalling kies now incase its a driver issue
Make sure kies is not running in the background. Use the original USB cable that came with the phone. Download the firmware again," might have been a bad download.
Sent from my GT-I9100 using xda premium
I ended up flashing it using the laptop instead, fresh install of kies. Worked first time back to stock 2.3.6 now tho. Here we go again.
Thought the official ics for the i9100p would be released by now tho
Ics as been released by some network providers,(02 & H3G) over here. but nothing at all for I9100p yet.
Orange and 02 plan to release it here sometime this month but its a wait and see game.
Im on Omega ver 9 ICS at the moment. NFC is not supported, but not a great loss. When Orange finaly release ICS for the I9100p, I will try it and regain NFC.
Rooting and deletion of the Orange bloatware will follow that.
Its going to be released this Thursday.
Samsung Galaxy S2 GT-I9100P, with NFC
Product Code: GT-I9100LKNORA
Software Build: I9100PBVLPB/I9100PORALPB/I9100PBVLPB/I9P100BVLPB
PDA: I9100PBVLPB | CSC: I9100PORALPB | PHONE: I9100PBVLPB
Version: Android 4.0.3 Ice Cream Sandwich
Thanks for the heads up on that one Saull. Will try it when it comes out though the Omega ICS as been as stable as a rock. Hats off to them. Still it will be nice to have NFC enabled, even if I cant find any use for it yet.
Sent from my GT-I9100 using Tapatalk
Heres one use
http://bcove.me/ohqchfd2
Dont open link above
edit: nvr mined
Shut up ANDROID you dont no what you are talking about.
Its a link to a news report from channel 4.
Stupid american
Saull said:
Shut up ANDROID you dont no what you are talking about.
Its a link to a news report from channel 4.
Stupid american
Click to expand...
Click to collapse
No need to insult a general populace based on one person.
i dont know why when i opened it my browser closed, i tried it twice, so dont judge me, or any on else, i just opened it on IE and now i see
bored_stupid said:
Thanks for the heads up on that one Saull. Will try it when it comes out though the Omega ICS as been as stable as a rock. Hats off to them. Still it will be nice to have NFC enabled, even if I cant find any use for it yet.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Here it is
Model: Samsung Galaxy S II GT-I9100P, with NFC
Country: United Kingdom
Carrier: Orange UK
Product Code: GT-I9100LKNORA
Latest firmware: I9100PBVLP6/I9100PORALP7/I9100PBVLP6/I9100PBVLP6
PDA: I9100PBVLP6
CSC: I9100PORALP7
Phone: I9100PBVLP6
Android Software Version: ICS 4.0.3 Ice Cream Sandwich
Build Date: 4/20/2012 10:09:50 PM
Release Date: April 26, 2012
Stock ROM Download (Pulled from official Samsung Kies server/Original/Unmodified): http://www.hotfile.com/dl/154228018/eacef35/I9100PBVLP6_I9100PORALP7_ORA.zip.html
Firmware Packaged Files:
I9100PBVLP6_I9100PORALP7_I9100PBVLP6_HOME.tar.md5
SS_DL.dll
Binary images contains of I9100PBVLP6_I9100PORALP7_I9100PBVLP6_HOME.tar.md5
Sbl.bin
cache.img
factoryfs.img
hidden.img
modem.bin
param.lfs
zImage
Pulled from aru.
Related
Hello all, and sorry for my newb-ness!
I was looking around for making my SGS2 "legal" again, flashing it with entirely "old" firmware, but the firmwares i found here, are not fitting the original description i have.
my phone ran (XWKI8 before rooting and flashing new firmware to it)
but the problem is;
[ROMS]Official i9100 carrier branded firmware download for Odin Flash
The only fitting my phone and operator is from the SP (3), where mine is Telia...
I even tried getting the ones from 3, but as the download links doesnt work, im pretty lost, can someone help me?
XWKI8: http://www.multiupload.com/H975DHZQLE
Firmware info: PDA:XWKI8| PHONE:NEKI2| CSC:HTDKI1
XWKI8 Stock Kernel:http://www.multiupload.com/4O6DVGUGSU
Password: [email protected]
can i just flash either one from "telia" and then update normally via kies, or whats the best solution?
i want the SGS2 so legal that i could turn it in to my provider for service!
or any firmware for Telia
or can anyone link to me to any firmware hardcoded with telia's info?
none of the ones linked in this forum, or others are valid... downloads just doesnt work, HELP
Telia
Denmark
XWKK5:http://www.multiupload.com/Q488SAT2VT
Firmware info: PDA: XWKK5| Phone: XXKI4| CSC: OXXKJ3
XWKK5 Stock Kernel: http://www.multiupload.com/HK8G4YGXWJ
Password is: [email protected]
Are you based in Denmark? If so, then this would be the latest Telia fm from that thread. KK5 is newer than KI8.
Yeah... but the download link doesnt work!
and thats my problem, because i CANT find it anywhere
thanks for the reply though, but if you find a working download link for the KK5 it would be much appreciated!
Kayel84 said:
Yeah... but the download link doesnt work!
and thats my problem, because i CANT find it anywhere
thanks for the reply though, but if you find a working download link for the KK5 it would be much appreciated!
Click to expand...
Click to collapse
http://hotfile.com/dl/136310155/64f8cc4/I9100XWKK5_I9100OXXKJ3.rar.html
Try that but not sure if same version.
Does it matter which kernel i have on the phone also?
im really a noob at this, but right now i have the NEKF2 kernel!
Kayel84 said:
Does it matter which kernel i have on the phone also?
im really a noob at this, but right now i have the NEKF2 kernel!
Click to expand...
Click to collapse
You'd need the stock kernel relating to the rom, I've had no need to service so not sure, if anyone else who has had previous experience on this could help.
thought as much... and all the download links relating to the XWKK5 are busted
think im am going to try this one, until i find a legal one
http://download.chainfire.eu/54/CF-Root/SGS2/CF-Root-SGS2_XW_OXA_KK5-v5.0-CWM5.zip
Try Checkfus. There's a thread on here, search for it.
what should i do with that?
i dont need to check if there is an update, i just want either an older version kernel/firmware from Telia Denmark
which is working, so that i can update the old fashioned way!
or what was you intention with checkfus?
You can download the KI8 firmware with Checkfus. Try it & see
Kayel84 said:
what should i do with that?
i dont need to check if there is an update, i just want either an older version kernel/firmware from Telia Denmark
which is working, so that i can update the old fashioned way!
or what was you intention with checkfus?
Click to expand...
Click to collapse
im currently trying a XWKK5 i found... report back, and trying the Checkfus
i thought you only could see if there was updates available on Checkfus
Thanks
Nope. You can download them. I tried it late last week & downloaded VAUKJ1 for ****s N giggles. The download/decryption of the firmware works perfectly.
Kayel84 said:
im currently trying a XWKK5 i found... report back, and trying the Checkfus
i thought you only could see if there was updates available on Checkfus
Thanks
Click to expand...
Click to collapse
what to do if a Odin firmware upgrade hangs?
it hasnt been moving for a few minutes now, still stuck at the <ID:0/005> data.img part
just wait it out, or any other ideas?
can i abort it, and start over with one i know works?
Sadly... checkfus was of no help
but i got my phone running on the XWKK5 firmware, and it works ok!
but still not the best solution, i simply need the KI8 for Telia
MistahBungle said:
Nope. You can download them. I tried it late last week & downloaded VAUKJ1 for ****s N giggles. The download/decryption of the firmware works perfectly.
Click to expand...
Click to collapse
Can you give me an example of how to fill out the info in CheckFus?
because its says error every time...
i've tried an exact copy of this:
Firmware info: PDA: XWKK5| Phone: XXKI4| CSC: OXXKJ3
help
In my case, in the standard tab I chose Android/GT-I9100T/Australia (Vodafone), then I clicked on check firmware. Checkfus told me KJ1 was the latest available, I clicked download, waited for it to download the firmware and at the end of the process it automatically decrypted it.
Which gave me a zip containing a tarball (just like the firmware in Intratech's thread) I can flash in Odin if I ever need to go back to stock.
See... I didnt notice if my phone is a regular GTi9100 or a -T, -N or whatever the options are, how do i find such info, because i was so smart not to make a backup of my current settings :-(
Sent from my GT-I9100 using XDA App
So... now i came this far:
my phone is:
Baseband :I9100XXKI4
Kernel : I9100XWKK5
so far so good...
but i have trouble appending the predictive and T9 dictionary... are there any addons i can get for these, because i really want to be able to use dictionary in my language (Danish + German and English)
please help
Nvm---
Found the solution (or rather the Firmware)
found an unmodified version, that had multilingual
thanks for ALL the help, greatly appreciated
btw, how to thank ppl in here?
Seeing how easy it was to root my Samsung S2 with Gingerbread I tried it as well after the ICS update through Kies but after the process my phone just stays at the loading screen with the yellow triangle. I tried re-doing the steps and also tried a factory reset in recovery mode, cleared cache but it does not want to boot up. I then noticed I never looked at my firmware version and now I am unable to get this information as the phone does not start up.
Where do i start to get my phone working again. Below is all the details I could get from my phone:
Samsung GT-I9100
Serial Number: 355310040993713
I noticed when my phone was rooted with Gingerbread and I did the upgrade through KIES to ICS it removed my root access - is there a similiar way if one is not able to boot up the OS? Also recovery mode and download mode all work so I assume I do not have a brick?
1-0-1 said:
Seeing how easy it was to root my Samsung S2 with Gingerbread I tried it as well after the ICS update through Kies but after the process my phone just stays at the loading screen with the yellow triangle. I tried re-doing the steps and also tried a factory reset in recovery mode, cleared cache but it does not want to boot up. I then noticed I never looked at my firmware version and now I am unable to get this information as the phone does not start up.
Where do i start to get my phone working again. Below is all the details I could get from my phone:
Samsung GT-I9100
Serial Number: 355310040993713
I noticed when my phone was rooted with Gingerbread and I did the upgrade through KIES to ICS it removed my root access - is there a similiar way if one is not able to boot up the OS? Also recovery mode and download mode all work so I assume I do not have a brick?
Click to expand...
Click to collapse
No you don't have a brick.
1: flash the stock kernel if you know what ROM version you had using Odin.
2: flash again using Odin.
Also do the code wipe after flashing. And start from scratch.
Do not restore GB backups and use correct CF-Root to get root.
Thanks for the quick reply - but that is the problem. I have no idea what my kernel version is as I did not take it down before doing the rooting.
1-0-1 said:
Thanks for the quick reply - but that is the problem. I have no idea what my kernel version is as I did not take it down before doing the rooting.
Click to expand...
Click to collapse
Well that was foolhardy.
How did you try to root after you updated to ICS then? Sounds like you tried to root by flashing a kernel; how did you know what kernel to use if you didn't know what your original kernel was?
You may need to flash a full stock firmware. That will include a stock kernel too.
well in that case flash a stock latest ICS using odin
after first boot dial *2767*3855#
it will wipe your phone but will fix the problems that may come later.
Ah okay - so I can use the "[GUIDE] Fix an unflashable or soft bricked GSII" (sorry cannot post links yet) on the xdadevelopers forum?
Would this also mean I am still able to use my phone with Samsung Kies or when does Samsung Kies normally stop working?
EDIT: I also stumpled across the "[ROM+Guide]Official i9100 Firmwares KL1/2/3/LA2,4/LB2,LPE/Q/7/2/F/S/4/7 Download" thread. Would it be safe in my case to grab one of the official firmware that matches my region or is this to risky?
ctomgee said:
Well that was foolhardy.
How did you try to root after you updated to ICS then? Sounds like you tried to root by flashing a kernel; how did you know what kernel to use if you didn't know what your original kernel was?
You may need to flash a full stock firmware. That will include a stock kernel too.
Click to expand...
Click to collapse
Yeah I was indeed foolhardy - I used XXKPA ICS Android 4.0.3 Firmware. I just finished downloading the main files as per the "[GUIDE] Fix an unflashable or soft bricked GSII" guide. This should cover the full stock firmware and stock kernel?
1-0-1 said:
Yeah I was indeed foolhardy - I used XXKPA ICS Android 4.0.3 Firmware. I just finished downloading the main files as per the "[GUIDE] Fix an unflashable or soft bricked GSII" guide. This should cover the full stock firmware and stock kernel?
Click to expand...
Click to collapse
Both recovery packages for GB and ICS both look like full firmwares. So yes, they will also include the kernel.
Just follow the guide.
Okay - the "[GUIDE] Fix an unflashable or soft bricked GSII" fixed my issue but now Samsung KIES gives me a "Your device does not support software upgrading through KIES".
Is there something else I can do or should I start looking at the "[ROM+Guide]Official i9100 Firmwares KL1/2/3/LA2,4/LB2,LPE/Q/7/2/F/S/4/7 Download" and can I just use the region closest or supported by mine?
1-0-1 said:
Okay - the "[GUIDE] Fix an unflashable or soft bricked GSII" fixed my issue but now Samsung KIES gives me a "Your device does not support software upgrading through KIES".
Is there something else I can do or should I start looking at the "[ROM+Guide]Official i9100 Firmwares KL1/2/3/LA2,4/LB2,LPE/Q/7/2/F/S/4/7 Download" and can I just use the region closest or supported by mine?
Click to expand...
Click to collapse
Kies will only update if you currently have a firmware/CSC combination that matches your region, and your region is officially supported. That is not likely now that you followed that "fix an unflashable or soft bricked" guide. Also, if you are in a non-supported region, Kies won't work for updates either. For example, I am an I9100 user in the USA, where it was never officially released, so Kies doesn't work for me for updates.
But now that you've followed that guide, you are familiar with flashing your phone yourself, and can use the Official i9100 Firmware thread to download and flash whatever version you want. No need to rely on Kies.
ctomgee said:
Kies will only update if you currently have a firmware/CSC combination that matches your region, and your region is officially supported. That is not likely now that you followed that "fix an unflashable or soft bricked" guide. Also, if you are in a non-supported region, Kies won't work for updates either. For example, I am an I9100 user in the USA, where it was never officially released, so Kies doesn't work for me for updates.
But now that you've followed that guide, you are familiar with flashing your phone yourself, and can use the Official i9100 Firmware thread to download and flash whatever version you want. No need to rely on Kies.
Click to expand...
Click to collapse
Excellent - this is becoming very interesting. My region was supported (Namibia) but I bought it in Germany. I see the latest release date firmware actually includes a German version. Those the region actually change the language of the phone as well?
I was thinking of using this one. What is the deal with the stock kernel file - do I need that as I thought the firmware is all that is needed
Code:
XWLP7
Firmware info
PDA:XWLP7
PHONE: XXLPS
Date: 03/04/2012
Android 4.0.3
SER (Russia) Multi-CSC (ALO, CAC, FTD, MBC, MSG, SEK, SER, SKZ, VHC): Download
XEN (Netherlands): Download
DBT (Germany): Download
XWLP7 Stock Kernel: Download
Password: [email protected]
Is there a way to grab the firmware of another Samsung S2 (girlfriend has one as well) and use it to flash mine?
1-0-1 said:
Excellent - this is becoming very interesting. My region was supported (Namibia) but I bought it in Germany. I see the latest release date firmware actually includes a German version. Those the region actually change the language of the phone as well?
Click to expand...
Click to collapse
You can choose any language that is included in the firmware after you flash it. Most, if not all, will include English and German.
1-0-1 said:
I was thinking of using this one. What is the deal with the stock kernel file - do I need that as I thought the firmware is all that is needed
Code:
XWLP7
Firmware info
PDA:XWLP7
PHONE: XXLPS
Date: 03/04/2012
Android 4.0.3
SER (Russia) Multi-CSC (ALO, CAC, FTD, MBC, MSG, SEK, SER, SKZ, VHC): Download
XEN (Netherlands): Download
DBT (Germany): Download
XWLP7 Stock Kernel: Download
Password: [email protected]
Click to expand...
Click to collapse
The stock kernel is linked in case you need it. It is also included in the full firmware package. But if you root with an insecure kernel, or flash a different kernel that auto-roots, and for whatever reason want to flash back a stock kernel, it is there for you.
1-0-1 said:
Is there a way to grab the firmware of another Samsung S2 (girlfriend has one as well) and use it to flash mine?
Click to expand...
Click to collapse
I think there is, but I don't know what the method is, as I've never had to do this, and have not been curious enough about it to research it for myself.
You don't have to grab any thing! Just see what very she has and you will find it in Sammobile or Intratech's thread or general forum.
Sent from my GT-I9100 using Tapatalk 2
By the way running Cyanogen Mod 9 with the latest nightly - cannot belive I did not do this earlier. Thanks all for the help!
1-0-1 said:
By the way running Cyanogen Mod 9 with the latest nightly - cannot belive I did not do this earlier. Thanks all for the help!
Click to expand...
Click to collapse
because earlier it was'nt like this
for me cm9 is flawless to my needs and get me 10 12 hours on my usage
I really F'ed up.
I was running ICS on my bell Galaxy S2 but I wanted to try the S3 rom that was released here. (Note that I am somewhat a stupid when it comes to android flashing). I installed a CF-root kernel (phone wasn't CWM at the time) but the phone didn't turn work - it would go to black screen.
So I tried a couple different kernels, nothing worked. Then I went crazy and flashing just about everything. Nothing has changed.
When I turn the phone on, it gets stuck at the Galaxy S II screen. When I go to download mode, it is like usual (no CWM, the standard one). And when I go into recovery, it says "Forced Upload, by key pressing".
What can I do now? I would like to just get the phone working at this point, official firmware that works with kies would be nice. S3 rom would be even better.
Whoever helps me solve this would be my hero. Serious.
EDIT: I am now on clockwork recovery if that helps.
flexmuzik said:
I really F'ed up.
I was running ICS on my bell Galaxy S2 but I wanted to try the S3 rom that was released here. (Note that I am somewhat a stupid when it comes to android flashing). I installed a CF-root kernel (phone wasn't CWM at the time) but the phone didn't turn work - it would go to black screen.
So I tried a couple different kernels, nothing worked. Then I went crazy and flashing just about everything. Nothing has changed.
When I turn the phone on, it gets stuck at the Galaxy S II screen. When I go to download mode, it is like usual (no CWM, the standard one). And when I go into recovery, it says "Forced Upload, by key pressing".
What can I do now? I would like to just get the phone working at this point, official firmware that works with kies would be nice. S3 rom would be even better.
Whoever helps me solve this would be my hero. Serious.
EDIT: I am now on clockwork recovery if that helps.
Click to expand...
Click to collapse
what's your phone model no? GT I9100, GT I9100M, GT I9100P, GT I9100T or GT I9100G?
Jokesy said:
what's your phone model no? GT I9100, GT I9100M, GT I9100P, GT I9100T or GT I9100G?
Click to expand...
Click to collapse
I9100M
flexmuzik said:
I9100M
Click to expand...
Click to collapse
You need to start all over again.
1. Download ICS firmware for BELL 19100M below:
Firmware Info
GT-I9100M - Canada (Bell)
PDA: I9100MUGLD3
CSC: I9100MBMCLD3
Version: 4.0.3
Date: 2012-04-23
Regions:
Download
2.
- Extract the zip file and flash the firmware via Odin.
- Flashing guide
Good luck
Jokesy said:
You need to start all over again.
1. Download ICS firmware for BELL 19100M below:
Firmware Info
GT-I9100M - Canada (Bell)
PDA: I9100MUGLD3
CSC: I9100MBMCLD3
Version: 4.0.3
Date: 2012-04-23
Regions:
Download
2.
- Extract the zip file and flash the firmware via Odin.
- Flashing guide
Good luck
Click to expand...
Click to collapse
Thank you so much. The phone works perfectly now!
If you know how to get it to the S3 rom (or just get the cool gesture features) that would be nice but if not I'll be happy on stock ICS until I learn a lot more about flashing.
flexmuzik said:
Thank you so much. The phone works perfectly now!
If you know how to get it to the S3 rom (or just get the cool gesture features) that would be nice but if not I'll be happy on stock ICS until I learn a lot more about flashing.
Click to expand...
Click to collapse
U'll never can flash different ROM for different device.. it will soft brick ur phone or worse... but u can flash any s3 mods/themes for s2 u reach it at s2 mods/themes section.
Sent from my GT-I9100 using xda app-developers app
If you want to stay safe, always browse i9100/i9100M forums dont get out of it, Seems like you are Newb so much please read all stickies in Q/A and General Thread
[India Only] Wifi Router for Sale [600 INR]
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
Adam Hui said:
U'll never can flash different ROM for different device.. it will soft brick ur phone or worse... but u can flash any s3 mods/themes for s2 u reach it at s2 mods/themes section.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Too late, I already did. It works really well except most of the new features (motion and all that) is missing .
Still a good ROM though. To clarify, it's the S3 ROM that was modified to fit the S2. I found it through google.
My galaxy s2 (GT-I9100 white) won't reboot after I root it and it stuck on the Startup screen and there's a yellow exclamation mark. It still can go into download mode again but I got no idea what to do in order to recover the phone... Anyone can help about it??? Did my phone just turn into a brick????:crying::crying::crying:
P/S: I am a Malaysian and this phone was bought in Switzerland and I never root it before.
kaiwen10 said:
My galaxy s2 (GT-I9100 white) won't reboot after I root it and it stuck on the Startup screen and there's a yellow exclamation mark. It still can go into download mode again but I got no idea what to do in order to recover the phone... Anyone can help about it??? Did my phone just turn into a brick????:crying::crying::crying:
P/S: I am a Malaysian and this phone was bought in Switzerland and I never root it before.
Click to expand...
Click to collapse
Basics.... Reflash any custom rom with Odin. That will help.
Sent from my GT-I9100 using xda premium
okti said:
Basics.... Reflash any custom rom with Odin. That will help.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Actually my friend sent me this kernel>>>CF-Root-SGS2_XX_OXA_LP1-v5.2-CWM5.tar
He told me to flash the kernel then only install custom...so I can directly flash the rom to my s2
by using odin???
kaiwen10 said:
Actually my friend sent me this kernel>>>CF-Root-SGS2_XX_OXA_LP1-v5.2-CWM5.tar
He told me to flash the kernel then only install custom...so I can directly flash the rom to my s2
by using odin???
Click to expand...
Click to collapse
Yes, download and flash new rom, Then you have guarantee your phone will boot up because after flashing kernel you might get bootloop too.
Sent from my GT-I9100 using xda premium
kaiwen10 said:
My galaxy s2 (GT-I9100 white) won't reboot after I root it and it stuck on the Startup screen and there's a yellow exclamation mark. It still can go into download mode again but I got no idea what to do in order to recover the phone... Anyone can help about it??? Did my phone just turn into a brick????:crying::crying::crying:
P/S: I am a Malaysian and this phone was bought in Switzerland and I never root it before.
Click to expand...
Click to collapse
This is because you flashed a wrong kernel for your phone.
# Quick question:
Is your phone on Gingerbread, Android 2.3.x or ICS (Ice Cream Sandwich), Android 4.0.x?
# If your phone is on ICS, then download and flash this kernel via Odin: www.gokhanmoral.com/public/files/siyahkernel/v3.0/Siyah-v3.5.2.tar
# If your phone is on Gingerbread, then download and flash this kernel via Odin: gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
This is because you flashed a wrong kernel for your phone.
# Quick question:
Is your phone on Gingerbread, Android 2.3.x or ICS (Ice Cream Sandwich), Android 4.0.x?
# If your phone is on ICS, then download and flash this kernel via Odin: www.gokhanmoral.com/public/files/siyahkernel/v3.0/Siyah-v3.5.2.tar
# If your phone is on Gingerbread, then download and flash this kernel via Odin: gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for that.
I have the I9100BVLPH stock ROM from T-Mobile UK on my phone so I downloaded the correct Chain Fire kernel (CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.tar) from http://forum.xda-developers.com/showthread.php?t=1103399 and this caused the phone not to boot.
Thanks for the link to Siyah, I used the v4.1.5 kernel and it worked great.
Hello there.
I'm in a bit of a trouble so I need some help. I've bought an S2 for my wife from a guy (in Ireland).
The phone was locked on Vodafone so I tried to root it maybe I'll be lucky to unlock it with out paying nothing. So, the phone is on Gingerbread with a BUKJ3 kernel. I've downloaded last night a CF root but by mistake I took a KG3 instead of KJ3. After flashing with Odin 1.85 I got stuck on the boot screen with the yellow triangle.
This morning I've downloaded another kernel as in KJ3 flashed with Odin, the phone is starting but no network coverage, I tried with different Sim cards but nothing so I went in recovery mode and wipe/format data, system, dalvik and cache as factory reset as well. Since that moment the phone won't boot, it gets stuck on the boot screen and yellow triangle.
I can go in recovery mode and download mode with no problem but I can't make it start.
I reflashed the kernel, I don't know what to do and tomorrow is my wife's birthday and I was trying to surprise her with a nice phone but instead looks like she is gonna get a brick ( I hope not)
Thank you guys for any help.
Go to sammobile and get something like unbranded XWLP7 stock rom....flash via odin
Then use rachmats ics rooting guide
Backup efs folder and make nand backup
Then get unlock app(by helroz or chainfire)
Sent from my GT-I9100 using xda premium
theunderling said:
Go to sammobile and get something like unbranded XWLP7 stock rom....flash via odin
Then use rachmats ics rooting guide
Backup efs folder and make nand backup
Then get unlock app(by helroz or chainfire)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for the reply. I don't mean any disrespect but for the last 3 hours I'm looking over kernels and forum and my brain is really wired now maybe.
I've had a look at sammobile but I can't find what you've recommended. A more specific link will be more than helpful.
Thank you very much anyway. If I'm getting advises it means I didn't bricked the phone so I might be able to fix it.
Once again thank you.
You just go to sammobile,then register,then firmware and files,then put the info in the 4 fields
eg
Smartphone
Android
Gt-i9100
Then uk/ire XEU (or vodafone or whatever..but unbranded better)
Then youll see a list about firmware version and their release date
Eg
Lpt 4.0.4 ics jul 2012
Lp7 4.0.3 ics apr 2012
So download lp7 4.0.3 and flash with odin.
Then use the rooting guide in my sig
Then do the other things I said.
theunderling said:
You just go to sammobile,then register,then firmware and files,then put the info in the 4 fields
eg
Smartphone
Android
Gt-i9100
Then uk/ire XEU (or vodafone or whatever..but unbranded better)
Then youll see a list about firmware version and their release date
Eg
Lpt 4.0.4 ics jul 2012
Lp7 4.0.3 ics apr 2012
So download lp7 4.0.3 and flash with odin.
Then use the rooting guide in my sig
Then do the other things I said.
Click to expand...
Click to collapse
Thank you very much. In the mean while I've managed to find exactly what you've said in your answer. I've choose the gingerbread version of the ROM cause that was what the phone had when I've bought it.
SO, now is it safe to go on ICS like I did half an hour ago with that Gingerbread rom?
Thank you and sorry about the noob question, never used an Samsung, only HTC.
Yeah just do what I said.......not what you think!.
theunderling said:
Yeah just do what I said.......not what you think!.
Click to expand...
Click to collapse
Did it, thank you very much. The phone start but somehow I've lost my IMEI number and base band. I must be really unlucky.
I've read that Odia can help in this matter but if anybody has any idea, I'll be happy to make a donation for getting back the IMEI number.
Once again thank you very much.
theunderling said:
Yeah just do what I said.......not what you think!.
Click to expand...
Click to collapse
It's always about read read more.... And don't flash anything unless you are 100% sure...
Sent from my GT-I9100 using xda premium
People contact Odia when theres a problem with their efs folder/no backup.
But you should have a backup and a nand backup.
I had the same problem yesterday and I restored efs folder/restored nand backup.....which got it back.
So try that or theres a thread about "restore imei in 9 easy steps".
theunderling said:
People contact Odia when theres a problem with their efs folder/no backup.
But you should have a backup and a nand backup.
I had the same problem yesterday and I restored efs folder/restored nand backup.....which got it back.
So try that or theres a thread about "restore imei in 9 easy steps".
Click to expand...
Click to collapse
I know I was stupid enough not to read before flashing, but now it too late to think about that.
the thing is I've never used a galaxy phone until these days and I wasn't aware of all this things and I don't know how to restore this NAND backup IF I have one, as I didn't make any backup before flushing. I hope I'll get some help from somebody and as I've said, a nice donation will be on the way to the helper.
Try GSII repair app.But you have to be rooted.
Hi all,
just upgraded from SGS2 -> SGS3 and my new SGS3 is a:
GT-I9300 (model)
4.0.4 (android)
I9300BVLG1 (baseband)
I9300XXBLG8 (build)
I'd like to upgrade to 4.1.1 but use a unbranded Samsung stock ROM and I found loads of different ones at:
http://forum.xda-developers.com/showthread.php?t=1835931&highlight=official+rom
But which one do I choose?
I took a guess and started to download:
I9300XXDLI8 Download (Thanks To SamMobile.com)
Base Firmware: I9300XXDLI8 (4.1.1)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 15 September 2012
Modem: XXDLI8
CSC: OXADLI8
Change List: 178140
Will that one work on my S3? I'm a bit of a noob here on S3 land but I have been flashing and rooting on my S2 all successfully, but all these versions are a bit confusing and I have tried to search for some explanations on these different versions but I haven't really found anything, could someone please help?
Thanks in advance
Any I9300 stock rom would basically work. Just choose one for your region at Sammobile! You have to register, but it has all the stock FW you'll need.
Just make sure you flash the right one in ODIN under PDA with all the checkmarks as it, DO NOT TICK REPARTITION or anything else.
If you want to root afterwards, flash CWM, and then SuperSU/SuperUser, which one is just preference. I personally prefer SuperSU.
Any will do
Just go sammobile website download latest stock rom for your country
Else slowly ota update to jellybean if you haven't root
Sent from my GT-I9300 using xda premium
guvno said:
Hi all,
just upgraded from SGS2 -> SGS3 and my new SGS3 is a:
GT-I9300 (model)
4.0.4 (android)
I9300BVLG1 (baseband)
I9300XXBLG8 (build)
I'd like to upgrade to 4.1.1 but use a unbranded Samsung stock ROM and I found loads of different ones at:
http://forum.xda-developers.com/showthread.php?t=1835931&highlight=official+rom
But which one do I choose?
I took a guess and started to download:
I9300XXDLI8 Download (Thanks To SamMobile.com)
Base Firmware: I9300XXDLI8 (4.1.1)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 15 September 2012
Modem: XXDLI8
CSC: OXADLI8
Change List: 178140
Will that one work on my S3? I'm a bit of a noob here on S3 land but I have been flashing and rooting on my S2 all successfully, but all these versions are a bit confusing and I have tried to search for some explanations on these different versions but I haven't really found anything, could someone please help?
Thanks in advance
Click to expand...
Click to collapse
I'm from Argentina, using Movistar carrier phone. I've decided to use the last stock firm from UK, usually gots the latest firms updates, my recomendation, update to UK (BTU) from sammobile, then, root the phone, then, install triangle away, it will reset the counter for CFW. This time reset the samsung galaxy csc from the google play store, this will wipe your phone and reset to the desire country, select UK. Finally now you can check that your phone looks original, and is updateable with kies
Unsecure kernel for I9300XXDLJ4
Thanks for all the replies!
So I'll get the UK (BTU) I9300XXDLJ4 FW from Sammobile, I've flashed before using ODIN so that wont be a problem, but I'd like to root as well afterwards, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
Thanks again
guvno said:
Thanks for all the replies!
, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
What on earth do you want that for ???
jje
Click to expand...
Click to collapse
JJEgan said:
guvno said:
Thanks for all the replies!
, anyone knows where I can find a unsecure kernel for I9300XXDLJ4 ?
What on earth do you want that for ???
jje
Click to expand...
Click to collapse
To root, using the below guide:
http://forum.xda-developers.com/showthread.php?t=1671969&highlight=stock+rom
That's how I used to root my S2, always worked great
Click to expand...
Click to collapse
An old extinct post your choice .
As it says .
This thread is left here only for historical purposes ! Now that the device has been released, easier and better methods have been developed to gain root, like CF-Root.
CF Root is the normal method .
jje
JJEgan said:
An old extinct post your choice .
As it says .
This thread is left here only for historical purposes ! Now that the device has been released, easier and better methods have been developed to gain root, like CF-Root.
CF Root is the normal method .
jje
Click to expand...
Click to collapse
Jepp, you're right, didn't notice that, so I went to your suggested post and also noticed:
'I am no longer supporting this version of CF-Root. I have personally moved away from permanent custom recoveries. I will still be providing roots by way of CF-Auto-Root (click). The downloads in this thread will remain available, I just won't be updating them..'
Hence I continued to the "CF-Auto-Root" link:
http://forum.xda-developers.com/showthread.php?t=1957273
Which did the job just fine! Many thanks for the suggestion.
Just one thing, I thought I'd be getting that 'Yellow Triangle' and I would have to use the "remover" but I'm not seeing didn't, so I haven't used the "remover". So all I've done if flashed the 'I9300XXDLJ4' (BTU) ROM/FW and then the 'CF-Auto-Root-m0-gti9300.zip'
can anyone tell me if my S3 is now recognized as a "normal upgradable" phone by Kies ?
Thanks again
What yellow triangle this is SGS3 not SGS2 .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
Upgrade via Kies sorry never use Kies/Ota so no idea .
jje
JJEgan said:
What yellow triangle this is SGS3 not SGS2 .
BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
Upgrade via Kies sorry never use Kies/Ota so no idea .
jje
Click to expand...
Click to collapse
Ah, ok, so no yellow triangle on SGS3 then, thanks.
I suppose I'll still use the remover/cleaner to '0' the counter and I'll just have to see about Kies/OTA when Samsung releases 4.1.2.
Thanks for all the assistance and help!