Hi there
I have a problem with my Samsung s2.
I have installed kies nor any other software on my pc to sync my phone to it. i don't even know how kies works...
I was going through the phone and under system i saw the update option...i updated the phone and the firmware too...after about 3-4 installations and reboots the phone got stuck on the start up screen...i tried hard reboot by holding the power+volume up+menu/OK keys - Nothing happened
then i deleted all my files from the sd card but that dint help either. Then i saw a video on youtube about clockworkmod... i followed that and after doing so the phone now goes to start up screen with a yellow triangle. when i try installing the ROM from odin it fails. Since then i got an icon showing that there is an error on the connectivity between the phone and the computer...i ran the clockworkmod again using odin and the phone returned to start up screen with a yellow triangle. The phone only goes to download mode but doesn't go to recovery/clockworkmod anymore (power+volume up+menu/OK buttons).
Another weird thing is that the phone doesn't turn off, as in if i press the power button for about 5 seconds the screen goes off but turn back on again...so if i have to reboot the phone i have to completely remove the battery n put it back in. when connected to the computer i don't see any storage drives on my computer only Odin detects the phone.
Please help me...
Thanks
Abbas
first try if you dont have a jig, remove battery and put back then Vol-down+Home+power...once you get download mod
Try a stock GB version on the ODIN from the link of All stock roms in my signature
make sure KIES is not running...and connected your phone directly to your PC motherbord USB socket, not through any hub or front USB socket...
better you give a full description of your problem like "soft bricked" instead of just "Q" on the heading, so that other can see at a glance...
Hi Zaheed,
Sorry about the heading...i actually accidentally posted this thread without the heading and now i cant see where i can edit it.
I will try what you have suggested and will revert to you.
Thanks
Abbas
zaheedahmed said:
first try if you dont have a jig, remove battery and put back then Vol-down+Home+power...once you get download mod
Try a stock GB version on the ODIN from the link of All stock roms in my signature
make sure KIES is not running...and connected your phone directly to your PC motherbord USB socket, not through any hub or front USB socket...
better you give a full description of your problem like "soft bricked" instead of just "Q" on the heading, so that other can see at a glance...
Click to expand...
Click to collapse
Hey Zaheed,
I tried to get the stock GB from the link on your signature but the file was now available to download. i might be trying to download a wrong file?? to be honest, i am very new to all this and dont know most of the things. Is it possible fr you to guide me in the simplest way possible. I will be very thankful.
Regards
Abbas
psychotico said:
Hey Zaheed,
I tried to get the stock GB from the link on your signature but the file was now available to download. i might be trying to download a wrong file?? to be honest, i am very new to all this and dont know most of the things. Is it possible fr you to guide me in the simplest way possible. I will be very thankful.
Regards
Abbas
Click to expand...
Click to collapse
you can download it from here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
latest GB is XWLA4
Make sure your phone is I9100, not I9100G / I9100T or any other
---------- Post added at 01:14 PM ---------- Previous post was at 01:06 PM ----------
this one is working: http://skywanker.net/download/downl...9100_DBT_I9100XWLA4_I9100XXKI4_I9100DBTKH1.7z
just download and unzip, then you wil get a single file, which to be selected from PDA of ODIN...thats it
feel free to ask more....
Hi once again,
i have just checked and found out that my phone's model is I9100G and not I9100. is this a problem or would i need to download another software for that?
Abbas
psychotico said:
Hi once again,
i have just checked and found out that my phone's model is I9100G and not I9100. is this a problem or would i need to download another software for that?
Abbas
Click to expand...
Click to collapse
Oh.... not the link i sent for I9100G....
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
I will give another link but sametime you search for I9100G issues too,
and visit this olso : http://forum.xda-developers.com/forumdisplay.php?f=1550
Thank you for all the help.
I found this site below:
sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
do you think this is the site with the correct GB for I9100G
Abbas
zaheedahmed said:
Oh.... not the link i sent for I9100G....
---------- Post added at 04:10 PM ---------- Previous post was at 04:07 PM ----------
I will give another link but sametime you search for I9100G issues too,
and visit this olso : http://forum.xda-developers.com/forumdisplay.php?f=1550
Click to expand...
Click to collapse
this is the I9100G firmware available at SAMMOBILE.COM
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
download one and flash through ODIN.
then you search the rooting method...
Goodluck
wassalam
ZACQ8 said:
this is the I9100G firmware available at SAMMOBILE.COM
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100G&r=1#modelsa
download one and flash through ODIN.
then you search the rooting method...
Goodluck
wassalam
Click to expand...
Click to collapse
ASAK,
I downloaded one of the flash for I9100G and installed it using ODIN but the phone is still in the same state as earlier...nothing has changed really.
Any advice on this?
Thanks
KH
your flashing on the ODIN was finished with "PASSED" ???
after flashing stil PC!PHONE icon??
ZACQ8 said:
your flashing on the ODIN was finished with "PASSED" ???
after flashing stil PC!PHONE icon??
Click to expand...
Click to collapse
Yes, the flashing finished with PASSED.
The PC!PHONE icon is gone.
psychotico said:
Yes, the flashing finished with PASSED.
The PC!PHONE icon is gone.
Click to expand...
Click to collapse
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
droid_me said:
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
Click to expand...
Click to collapse
jsut see the other thread you posted the same and answer please?
droid_me said:
hi psychotico,
have you suceeded bringing up ur phone
? if you've solved, could you please write down the step by step? as my s2 couldn't get into download mode nor recovery mode, it just show a picture of phone---/!\---pc, anyway the odin still can detect my phone. i see some others are experienced this problem too but haven't get clear solving yet. many thanks if there is any master here can help
Click to expand...
Click to collapse
No mate, no luck at all....please help me if you have found a solution.
Thanks
psychotico said:
No mate, no luck at all....please help me if you have found a solution.
Thanks
Click to expand...
Click to collapse
wish me luck then
i'm getting help from zacq8, please see http://forum.xda-developers.com/showthread.php?p=25288319#post25288319
Related
hey there!
i guess i found the solution for my problem on this forum but i cant find the topic anymore. i just wanted say "thank you" to the unknown author,
and post the solution again, so maybe some more people can find it since it was just coicidence for me..
okay my samsug galaxy ace s8530 has been bricked when some flashing went wrong. afterwards there was no reaction anymore. i was pretty shure ther was no way but doing this.
unfotunetly i found a post without any answers where someone told the following:
1: take out your battery
2: connect your mobile to your pc using the usb data cable
3: keep pressed these three buttons: Vol- , Menu, Power
4: still keep them pressed and put back your battery to the phone. this is not too easy but actually its possible
5: the mobile will go to download mode, flash with odin.
my battery was nearly completly charged when i did this, and
it worked for me! thanks again to the guy who found out!
btw it is also possible to get to the arm9 mode this way. i just couldnt figure out what it was good for.
I will give it a try tomorrow on my s5570 that i just bought/bricked lol
unfortunately it didnt work for me, would creating a usb test jigs help in my case (my phone cant even power on), and does it charge if I connect it to the power cord?
snoer said:
hey there!
i guess i found the solution for my problem on this forum but i cant find the topic anymore. i just wanted say "thank you" to the unknown author,
and post the solution again, so maybe some more people can find it since it was just coicidence for me..
okay my samsug galaxy ace s8530 has been bricked when some flashing went wrong. afterwards there was no reaction anymore. i was pretty shure ther was no way but doing this.
unfotunetly i found a post without any answers where someone told the following:
1: take out your battery
2: connect your mobile to your pc using the usb data cable
3: keep pressed these three buttons: Vol- , Menu, Power
4: still keep them pressed and put back your battery to the phone. this is not too easy but actually its possible
5: the mobile will go to download mode, flash with odin.
my battery was nearly completly charged when i did this, and
it worked for me! thanks again to the guy who found out!
btw it is also possible to get to the arm9 mode this way. i just couldnt figure out what it was good for.
Click to expand...
Click to collapse
Hi, i think you are talking about my post here it is.
http://forum.xda-developers.com/showthread.php?p=13643975#post13643975
Not working for mine too...Service center too far from my place...does jig working???
Guys,
i was using the ClockWork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
VOL DOWN + HOME+ POWER KEY
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Thank...
...you and specially SuperMini...
racerronny said:
guys,
i was using the clockwork mod rom manager
i was trying to backup the current gingerbread 2.3.4 rom
n den suddenly the phone switched off
now its not turning on
i tried pressin the
vol down + home+ power key
inorder to go to download mode n re-flash it but
nothing appears on the screen
the phone is not responding at all
my cell was rooted
plz someone help me.......plzzz
im stuck!!!
Click to expand...
Click to collapse
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
SuperMini said:
Hi, i think you are talking about my post here it is.
http://forum.xda-developers.com/showthread.php?p=13643975#post13643975
Click to expand...
Click to collapse
No it's not the same!!!
With your method, you didn't mention to keep pressing the 3 buttons while putting back the battery. In his, there is this instruction.
With yours it didn't show "Downloading".
Geeky Dicky said:
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
---------- Post added at 04:34 PM ---------- Previous post was at 04:30 PM ----------
better never use cwm on your ace!! Or your ace's motherboard will dead..seriously, my ace now at samsung care center..hopefully she not dead yet..
Click to expand...
Click to collapse
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
an0nym0us_ said:
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
Click to expand...
Click to collapse
same case..
My ace is also dead aftr usig ROM MANAGER
i hate rom manager,
@geeky.
Did u get ur ace fixed undr warranty?
Hw lng it takes? Plz reply...
an0nym0us_ said:
what ur talking about? we have been using cwm 4.0.0.9 for months now. head to galaxy ace forum and read cwm recovery thread, look on its posting date seriously maybe ur problem because ur installing cwm directly from rom manager.
Click to expand...
Click to collapse
yeah me too used CWM recovery on ace but not through ROM Manager as its not enlisted in devices.. but there is flashable zip which works
but now i use CF-Root kernel which installes CWM and Recovery , root ,ext4 by default
Thank you
Thank you!!! Works perfect.
brick my ACE just once when using ODIN. i accidentally disconnect the usb while flashing stock firmware using ODIN. but its just that.this should never happens if u follow the guide post by OP in every mod/rom/patch thread. how did u guys brick ur devices? i want to learn something from u guys.
edit: sorry OP for off thread
Thank you! worked like a charm =)
Thanks for this tip! It saved my wife's phone and by extension: me!
yes im trying to revive my friends bricked ace...the method is correct..but if u dont see the "download mode" just try connect to pc/lappy open ODIN n see..if its detcet the ace..i think that should be fine to flash...
correct me if im wrong...lol
Update android
Personnel to needing help with my samsung galaxy ace gt-s5830b
I was trying to install a newer version of android it was installed and reset
after reset and erased it does not turn over at all ..
if staying pressing volume up + home + power it recognizes the computer by Keis etc. ..
only that I can not do anything ... nor can recover odin ..
anyone been through this problem?
or someone knows how to do it on again?
Thank you for now
Help need for bricked ace S5830
Good day to all!
I am trying to help out a colleague who 'probably' has bricked his Ace S5830
He says he was attempting to flash stock 2.3.6 and this happened.
He has been rooted and using CM previously.
Can anyone please advise what this screen/logo means?
It can go to Download mode but not recovery mode.
I can obtain more details if required.
Thanks and cheers to all.
My phone only enter to the download mode, but i can`t flash it, because i have half-bricked USB port. It`s only charges after connecting to PC: "USB Device not recognized" and in the device manager: "Unknown Device" "A request for the USB device descriptor failed.". Any solutions?
good afternoon,
I have to installed the lewa rom and I want return back to a stock rom.
I tried to use odin but when I click on start I get this message:
cannot open the usb serial port. code: 32
Someone can help me?
I used odin in the past several times without any problem
I make the hard reset on phone and the wipe cache too.
thanks
is your phone being recognized by odin correctly?
---------- Post added at 10:35 PM ---------- Previous post was at 10:28 PM ----------
if the answer is yes, then all you have to do is shutdown samsung kies before flashing with odin!
Both programs get in conflict!
kies is jealous of odin!
--------------------------------------------------------------------------------
press "THANKS" if i helped
You might be missing the USB drivers inside the phone.....reflash the ROM and try again
Herpderp Defy.
coluichepensa said:
good afternoon,
I have to installed the lewa rom and I want return back to a stock rom.
I tried to use odin but when I click on start I get this message:
cannot open the usb serial port. code: 32
Someone can help me?
I used odin in the past several times without any problem
I make the hard reset on phone and the wipe cache too.
thanks
Click to expand...
Click to collapse
try again with another USB port or use another PC
Sorry for my bad English
SOLVED. There were some Kies processes working in background even if the program was clossed. I terminated those processes and I flashed with odin without anyother problem.
that´s what i said! good
--------------------------------------------------------------------------------
Its free! hit tanks if i helped
I'm not sure where to post this,pls move to the right place.
I'm afriad my galaxy s2 is either damaged or bricked.I tried to flash the leaked official jelly bean via Odin,am sure i selected the right files and when i clicked on START,i waited for over 40mins and nothing happened,so i closed odin,unplugged my phone,removed the battery and reinserted it,and the phone has refused to switch on.I think i have tried to flash to a non compactible baseband.
Please is there anything i could do to get my phone to work again?
Any advice is appreciated,Thanks.
Did you check md5 of the files you downloaded? What it's you phone model? Does it boot?
Sent from my GT-I9100 using xda app-developers app
hd2life said:
Did you check md5 of the files you downloaded? What it's you phone model? Does it boot?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
When i extracted the file i downloaded,there are about 5 files and according to the guidelines,you click on PDA and select a file named CODE,click on phone and select a file named PHONE,then CSC and PIT,these are four files that was used.Then the Md5 file wasn't used though it's among the files that was extracted but was not asked to use.My phone is galaxy GT-i9100.
Thanks for your help.
Can you enter recovery or download mode? I Once flashed S3 kernel on my S2 and it looked like it was bricked. No power not even charging but then I entered in download mode and flashed correct kernel via odin.
luketanti said:
Can you enter recovery or download mode? I Once flashed S3 kernel on my S2 and it looked like it was bricked. No power not even charging but then I entered in download mode and flashed correct kernel via odin.
Click to expand...
Click to collapse
I can't enter recovery or download mode,i have tried them both without success.It doesn't show any sign of charging when plugged to power or any sign when connected to my pc.
USB jig time.
how many files did you flash? code, csc and modem?
what did you do with the pit file?
gastonw said:
USB jig time.
how many files did you flash? code, csc and modem?
what did you do with the pit file?
Click to expand...
Click to collapse
I flashed these four files that you mentioned,pit included-
When i clicked on start,nothing happened for about 40 mins,so i decided to close odin and unplug the phone,removed the battery and reinserted.
And the phone refused to switch on...am finnished!
Don't know what to do
eigh8plus said:
I flashed these four files that you mentioned,pit included-
When i clicked on start,nothing happened for about 40 mins,so i decided to close odin and unplug the phone,removed the battery and reinserted.
And the phone refused to switch on...am finnished!
Don't know what to do
Click to expand...
Click to collapse
Don't mess with pit files man......that's a last resort thing.
---------- Post added at 04:11 AM ---------- Previous post was at 03:46 AM ----------
eigh8plus said:
I flashed these four files that you mentioned,pit included-
When i clicked on start,nothing happened for about 40 mins,so i decided to close odin and unplug the phone,removed the battery and reinserted.
And the phone refused to switch on...am finnished!
Don't know what to do
Click to expand...
Click to collapse
This means that you pulled the plug while in odin right? yakes.
As I said, usb jig. And start getting ready for jtag.
gastonw said:
Don't mess with pit files man......that's a last resort thing.
---------- Post added at 04:11 AM ---------- Previous post was at 03:46 AM ----------
This means that you pulled the plug while in odin right? yakes.
As I said, usb jig. And start getting ready for jtag.
Click to expand...
Click to collapse
Yes,though i closed odin before pulling out the plug,makes no difference i suppose.
Am a newbie'pls what's usb jig and jtag,seems that will be the solution?
Thanks for helping out.
Searching, reading an learning is what a noob is all about
Sent from the little guy
gastonw said:
Searching, reading an learning is what a noob is all about
Sent from the little guy
Click to expand...
Click to collapse
Yea,been doing all that.Could someone pls point me to something else i need to read.
gastonw said:
As I said, usb jig. And start getting ready for jtag.
Click to expand...
Click to collapse
There
Sent from the little guy
JTAG .
Look here :http://www.jtagbox.com/category/riff-jtag-box-owners-unbrick-your-phone/
Qwerty123 \m/ said:
JTAG .
Look here :http://www.jtagbox.com/category/riff-jtag-box-owners-unbrick-your-phone/
Click to expand...
Click to collapse
Thanks,that link is enough to get me started..but is it something i could just download and instal on my pc,connect my phone and repair or i would need a kinda of pad or something...saw a video on youtube where something was connected or soldered to the phone and then plugged to the pc without the battery.
Thanks.
If you spend money on a RIFF box, unless you know what you're doing/have done it before more than a few times, there's a fair chance you'll both pay for something you'll never use again & bork your phone beyond repair.
Pay someone else a quarter of the cost & have them do it/successfully fix your phone (assuming it can be JTAG'd & isn't a MB replacement job).
MistahBungle said:
If you spend money on a RIFF box, unless you know what you're doing/have done it before more than a few times, there's a fair chance you'll both pay for something you'll never use again & bork your phone beyond repair.
Pay someone else a quarter of the cost & have them do it/successfully fix your phone (assuming it can be JTAG'd & isn't a MB replacement job).
Click to expand...
Click to collapse
Alright,this requires more than watching a youtube video...i thought it was something i could do on my own.
gastonw said:
USB jig time.
how many files did you flash? code, csc and modem?
what did you do with the pit file?
Click to expand...
Click to collapse
With USB jig,if i eventually get it into download mode,what else will i do?
Thanks for the help so far.
MistahBungle said:
If you spend money on a RIFF box, unless you know what you're doing/have done it before more than a few times, there's a fair chance you'll both pay for something you'll never use again & bork your phone beyond repair.
Pay someone else a quarter of the cost & have them do it/successfully fix your phone (assuming it can be JTAG'd & isn't a MB replacement job).
Click to expand...
Click to collapse
As i was reading through the forum,i found this http://forum.xda-developers.com/showthread.php?t=1402286
An if i get lucky with download mode using USB jig,which of this firmwares should i flash? http://forum.xda-developers.com/showthread.php?t=1075278
Thanks for any advice.
eigh8plus said:
With USB jig,if i eventually get it into download mode,what else will i do?
Thanks for the help so far.
Click to expand...
Click to collapse
Stock ROM, something like this.
Alright,thanks for this.I just ordered for a USB jig and i pray it will save the day.
Thanks to all that contributed.
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
U did not post any images.
Btw when u try to enter in recovery disconnect your phone from the pc/laptop. I had problems entering recovery when it was connected to my laptop.
aminrezaya said:
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
Click to expand...
Click to collapse
If it enters download mode, flash a stock samsung rom using Odin.. Once it enters download mode press the Volume up button to continue and then connect your phone to Pc while odin is running
aminrezaya said:
Hi to all,
I have an i9300 Galaxy S3 it is dead when I wanna enter to recovery mode but it doesn't enter, but it enters to downloading mode but it does not show GT-I9300 in front of Product Name .
and I can't flash it with Odin downloader.
please have a look to these images
Click to expand...
Click to collapse
You have Sudden Death Syndrome probably since the product name is blank. You need a new motherboard.
the same happened to me, but i have a product name, it happend after updating to 4.2.1 by Samsung WanamLite, please help
factory reset
Odin can't falsh it I tried with SPT box but not succed.
It doesn't enter to recovery mode for factory reset
Have you tried flashing a recovery with Odin?
Yes I tried but Odin can't flash it
aminrezaya said:
Yes I tried but Odin can't flash it
Click to expand...
Click to collapse
Had the same exact problem. Sudden Death Syndrome... took it back to Samsung who replaced the motherboard. I got it back the next day.
better u go in nearest samsung shop to check ur device..
Sent from my GT-I8150 using XDA Premium HD app
I bought it from another country
There is no Samsung shop to change or repair it please help me
Ok, can we have some clear details ?
Was the phone in this state when you bought it?
If not, what did you do prior to the problem occurring?
Are you sure it is an i9300?
What does up when you go to settings/about phone?
so u need to buy a new phone.. bcoz u have no product name in ur device when u entering download mode..
Sent from my GT-I8150 using XDA Premium HD app
just to clarify when you really get SDS you cant even get to any screen, the phone does not respond to any button or wire.
it is just dead, no recovery, no download.
i know cos i had it, but i am now on a sds immune mobo
exge said:
just to clarify when you really get SDS you cant even get to any screen, the phone does not respond to any button or wire.
it is just dead, no recovery, no download.
i know cos i had it, but i am now on a sds immune mobo
Click to expand...
Click to collapse
Not true. Most people with SDS can get into Download mode only, but flashing anything doesn't work. The product name comes up blank and the Firmware shows CUSTOM no matter what, because it can't find the stock Samsung ROM, even if you've never rooted your device.
Be careful because a lot of people have been denied by service centers who claim they rooted their device because it says CUSTOM, but assert that you don't even know what that is (root). If the service center tells Samsung, Samsung can't go against their word. This is from other people's experience on here that I've read. They'll charge you $350 to replace the motherboard, so make sure it's clear.
http://www.mediafire.com/?xrn045px42pbyso
U need to flash firmware with odin. i know u already tried it but try from this way which i m showing u.
first browse pit file then bootloader, pda, phone and csc files too. then u will see flashing will start u need all files.
DjamelGsm said:
http://www.mediafire.com/?xrn045px42pbyso
Click to expand...
Click to collapse
This video better be showing how to replace the eMMC or the motherboard otherwise "coming soon" is rubbish and lies.
---------- Post added at 12:05 PM ---------- Previous post was at 12:04 PM ----------
exynoss said:
U need to flash firmware with odin. i know u already tried it but try from this way which i m showing u.
first browse pit file then bootloader, pda, phone and csc files too. then u will see flashing will start u need all files.
Click to expand...
Click to collapse
Won't help in the case of SDS
rootSU said:
This video better be showing how to replace the eMMC or the motherboard otherwise "coming soon" is rubbish and lies.
---------- Post added at 12:05 PM ---------- Previous post was at 12:04 PM ----------
Click to expand...
Click to collapse
:laugh:
http://www.dzgsm.com/vb/threads/9232-GT-I9300-Galaxy-S3-إصلاح-عيب-product-vide?p=52896#post52896
Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.