Ive searched the forum for solutions on how to fix this issue but can't seem to find I good answer. I've also changed kernels but it still goes on & off. If anyone can help I would really appreciate it thanks.
Sent from my PG86100 using xda premium
I can't be the only one with the problem?
Sent from my PG86100 using xda premium
you should try switching over to static ip
Try changing your router channel to 11 if its not already. Also try updating your routers firmware. And in settings/WiFi/advance WiFi settings make sure best performance is checked and sleep is set to never.
#Root-Hack_Mod*Always\
Thanks for all your replies,but I should have stated that I only have this problem when using virus rom. I was on miui the WiFi worked flawlessly no restarts. I'm just wondering what I should do to get it stable on virus because his Rom is dope.
Thanks again
Sent from my PG86100 using xda premium
Well in that case you could try switching kernels if you haven't already. Also you can adjust the WiFi setting in the settings menu if you haven't already as well. The info I posted is still relevant toward the router you own it may or may not help with the virus issue but it will give you better performance if you keep your routers firmware up to date that's if you haven't already.
#Root-Hack_Mod*Always\
laie1472 said:
Well in that case you could try switching kernels if you haven't already. Also you can adjust the WiFi setting in the settings menu if you haven't already as well. The info I posted is still relevant toward the router you own it may or may not help with the virus issue but it will give you better performance if you keep your routers firmware up to date that's if you haven't already.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
What would be a good kernel to use?
Sent from my PG86100 using xda premium
evoguy404 said:
What would be a good kernel to use?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
New anthrax or ziggy kernels both work great.
ssojyeti2 said:
New anthrax or ziggy kernels both work great.
Click to expand...
Click to collapse
Thanks but I've used both and I'm still getting the WiFi reset issue. I tried ziggys with the 329 release of 3.5 but still a no go.
Sent from my PG86100 using xda premium
There is no fix and hasn't been for awhile. Any sense 3.5 rom I go on my wifi goes in and out. Awhile ago I tried posting a thread for advice and I'm guessing because it happens to so few people nobody really wanted to look into it. My advice don't use 3.5 if you need wifi. Try one of the 2.17 base roms. They're just as smooth. Also I'm sure once ics hits the issue won't be there with 3.6. Not too much longer!
Related
I had Google's WiFi tether (2.0.8 - I think) working quite well on my stock, rooted T-Bolt.
I decided to take the plunge and update to Das Bamf v1.6 Remix and after doing so, it appears to have broken my Wifi Tether. I have tried every version I can, and nothing seems to work. My WiFi devices will drop the connection within a minute or so, sometimes as quickly as 30-45 seconds after starting it on the phone.
Why? What can I do to fix this?
Thanks, any advice would be GREATLY appreciated.
-Rob
What do you mean by Google's WiFi tether? You mean the HTC one? Or the market one? Also what kernel comes with bamf?
Sent from my ADR6400L using XDA App
By "Google" I meant the project on Google Code, as found here:
http://code.google.com/p/android-wifi-tether/
I am not using the app included in the stock rom, because:
1. It will incur an additional monthly fee
2. I have heard it only supports 3G speeds when doing so
I am just trying to understand what from Das Bamf "broke" this, because it was working great on the stock ROM.
-Rob
Well I'm inclined to think the kernel included in your Rom has something to do with it. Try a new kernel see if that helps. Also the mobile hotspot included is free at least until the 15th and I think they extended it, and also works with 4g. In my experience ( incredible then tbolt) the mobile hotspot one works better
Sent from my ADR6400L using XDA App
I'm inclined to think both of you are wrong. It works fine here, and always has.
aostl said:
the mobile hotspot included is free at least until the 15th and I think they extended it
Click to expand...
Click to collapse
I suspect it will be free until after tiered data pricing kicks in. That allows Verizon to avoid grandfathering unlimited tether data (adding tether will be a contract change, so they can force tiers).
adrynalyne said:
I'm inclined to think both of you are wrong. It works fine here, and always has.
Click to expand...
Click to collapse
That WiFi tether app always did that to me on the inc and even my bolt once. Seemed like it liked some kernels better than others cause I tried a ton of them and it wasn't that consistent across. Dunno man just trying to help the guy. That's why I use the hotspot one while its free
Sent from my ADR6400L using XDA App
Please note 3.x version that is experimental does not yet work,.
aostl said:
That WiFi tether app always did that to me on the inc and even my bolt once. Seemed like it liked some kernels better than others cause I tried a ton of them and it wasn't that consistent across. Dunno man just trying to help the guy. That's why I use the hotspot one while its free
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Oh I hear ya. The app is flaky, and folks are inclined to blame everything but the app on the problem.
Its certainly not the rom, and if it connects, its not the kernel either.
I'm using it right now, 2.0.8, without issue. Disconnecting every 35-45 seconds sounds suspiciously like someone doesn't have stay awake turned on in development settings.
Thanks for the responses, I appreciate the info.
When you say "stay awake" in developer... where? In the Wifi tether app, or somewhere else in the settings for the ROM? I looked in the app and can't find that.
Thanks, please advise.
-Rob
robroy90 said:
Thanks for the responses, I appreciate the info.
When you say "stay awake" in developer... where? In the Wifi tether app, or somewhere else in the settings for the ROM? I looked in the app and can't find that.
Thanks, please advise.
-Rob
Click to expand...
Click to collapse
Settings > Application > Development. I don't see how that would be the problem though.
Sent from my 4G Thunderbolt.
robroy90 said:
Thanks for the responses, I appreciate the info.
When you say "stay awake" in developer... where? In the Wifi tether app, or somewhere else in the settings for the ROM? I looked in the app and can't find that.
Thanks, please advise.
-Rob
Click to expand...
Click to collapse
settings>applications>development
joshw0000 said:
Settings > Application > Development. I don't see how that would be the problem though.
Sent from my 4G Thunderbolt.
Click to expand...
Click to collapse
If the phone sleeps, it disconnects.
Sent from my ADR6400L using XDA App
For those of you who happen to be Running Das Bamf, does WiFi Tether work for you? If so, what version?
I will say it again, I love Das Bamf, but the WiFi tether worked FLAWLESSLY for me in the Stock Rom, and after switching to Das Bamf, it doesn't. Given the fact that was the only change I made, I can't see how it isn't an issue specific to Das Bamf, but I would love to be proven wrong so I can fix it and keep Das Bamf.
Thanks!
-Rob
2.0.7
10chars
I disagree I'm running v.3 just fine on my stock Rom rooted tbolt!
Sent from my THUNDERBOLT using XDA App
BuffoGT said:
I disagree I'm running v.3 just fine on my stock Rom rooted tbolt!
Sent from my THUNDERBOLT using XDA App
Click to expand...
Click to collapse
Disagree all you want, its a flaky app.
Sent from my ADR6400L using XDA App
robroy90 said:
For those of you who happen to be Running Das Bamf, does WiFi Tether work for you? If so, what version?
I will say it again, I love Das Bamf, but the WiFi tether worked FLAWLESSLY for me in the Stock Rom, and after switching to Das Bamf, it doesn't. Given the fact that was the only change I made, I can't see how it isn't an issue specific to Das Bamf, but I would love to be proven wrong so I can fix it and keep Das Bamf.
Thanks!
-Rob
Click to expand...
Click to collapse
Tell you what, you tell me what the issue is, and I will fix it. Seeing that you are so convinced its our Rom.
I tried it yesterday. It was fine.
Sent from my ADR6400L using XDA App
I've been running wifi tether for quite some time with no issues, aside from the standard flakiness that comes standard with the app. 3.0 pre14 is really flaky, but 2.0.8 seems to be working fine for me.
This was true of the stock ROM with root, the 4 minutes I wasted on VirusROM, and BAMF 1.4+.
@adrynalyne - Fantastic ROM by the way.
Thank you
adrynalyne said:
Tell you what, you tell me what the issue is, and I will fix it. Seeing that you are so convinced its our Rom.
I tried it yesterday. It was fine.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
First off, I am not "calling you out" and I want you to know I appreciate your hard work. I really do like your ROM.
I don't know what to tell you to look for, honestly. I just know on the stock ROM I was running 2.0.8 using WPA2 and it would work great.
I did a FULL wipe before installing Das Bamf v1.6 Remix, and ever since, no version of WiFi tether seems to maintain a connection for more than 30-45 seconds, and I confirmed the screen does not dim/sleep.
In the past two weeks I have used Gingeritis, Bamf 2.0 and Gingerbean using the latest updated imoseyon kernel. I am currently using the latest Gingeritis with imoseyon 3.0.1 and the MR2 radio that was just leaked.
There is one lingering issue that is uniform throughout all updates and changes of roms/kernels/radios. Charging time/speed.
After a new Rom install, charging is just how it should be. Then, after a phone call the charging time becomes extremely slow or even sometimes stops at a certain percentage. The only way to fix this is a reboot.
Anyone able to explain what in the GB OS and/or kernels is causing this?
Sent from my ADR6400L using XDA Premium App
I can't, but I promise you the search button can
joshnichols189 said:
I can't, but I promise you the search button can
Click to expand...
Click to collapse
Dide come on...he just had a simple question. You didn't have to blast him like that.
Simple question != Dev thread
sent via telepathy
This was in my backyard today.
Sent from my ADR6400L using XDA Premium App
KGBxxx said:
This was in my backyard today.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
You need to ****ing move now.
Sent through the interwebs.
Mudavo said:
In the past two weeks I have used Gingeritis, Bamf 2.0 and Gingerbean using the latest updated imoseyon kernel. I am currently using the latest Gingeritis with imoseyon 3.0.1 and the MR2 radio that was just leaked.
There is one lingering issue that is uniform throughout all updates and changes of roms/kernels/radios. Charging time/speed.
After a new Rom install, charging is just how it should be. Then, after a phone call the charging time becomes extremely slow or even sometimes stops at a certain percentage. The only way to fix this is a reboot.
Anyone able to explain what in the GB OS and/or kernels is causing this?
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Same here and I have searched and can't find solution .
Same here - also no solution upon searching. Back to Froyo BAMF 1.7 until someone finally addresses this...
gramsey1911 said:
Dide come on...he just had a simple question. You didn't have to blast him like that.
Click to expand...
Click to collapse
It was kind of harsh I'm sorry but it's talked about a lot in the rom threads
Sent from my ThunderBolt using XDA Premium App
yep.. charging time is definitely an issue.. I wonder if it has anything to do with the kernel.
I must have been lucky then, because after i flashed the MR2 radio, all that BS went away. Now I have super fast charging and it goes to 100%
It is a slight hassle, but there is a fix for it right now. When your phone is plugged in and charging, restart it while keeping the cord in. It should charge normally after it restarts. I've had the same issue and this makes things act normal. However, you need to do this every time you charge, not just once.
Why aren't developers asking for help on fixing this?
Why's everyone so mum about the issue?
This is starting to drive me nuts.
I know you reboot to fix it but , what specificly is causing it??
I mean when you think about it. Wouldn't killing the process whatever it may be, that kicks in when you get a call fix it?
Every area I go where I know I used to have strong 3g, now my phone only ever says 1x and data speed matches. I'm running team XRON rc1. Anyone know why my 3g is gone? And/or know how i can fix it?
Any help is appreciated.
Sent from my PG86100 using XDA App
Stock rom doesn't show 1x. Ever. Custom roms do.
I realize that.. but I know I actually was on 3g before and now I am not. This isn't my first phone/custom rom.
Sent from my PG86100 using XDA App
I believe it is a mod done in the SystemUI.apk. Look here: http://forum.xda-developers.com/showthread.php?t=1208898
Edit** Maybe a kernel issue? I remember having the same issue on my EVO 4G with downloading roms and/or radios. What radio are you using?
SpartanEvo said:
I believe it is a mod done in the SystemUI.apk. Look here: http://forum.xda-developers.com/showthread.php?t=1208898
Edit** Maybe a kernel issue? I remember having the same issue on my EVO 4G with downloading roms and/or radios. What radio are you using?
Click to expand...
Click to collapse
Just the stock one I assume, unless the rom flashed something different. I'll have to flash another rom to see if it fixes it. I have seen the systemui edits that have borked 3g but I've ruled that out in my case.
Sent from my PG86100 using XDA App
tjb3401 said:
Just the stock one I assume, unless the rom flashed something different. I'll have to flash another rom to see if it fixes it. I have seen the systemui edits that have borked 3g but I've ruled that out in my case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
The latest CDMA radio is 0.97.10.0530. Look in Baseband version is Settings and see what you have. If you have the older one, you can find the latest here:
http://forum.xda-developers.com/showthread.php?t=1192661
I haven't seen any roms that include the radio. You usually have to manually update that yourself...
SpartanEvo said:
The latest CDMA radio is 0.97.10.0530. Look in Baseband version is Settings and see what you have. If you have the older one, you can find the latest here:
http://forum.xda-developers.com/showthread.php?t=1192661
I haven't seen any roms that include the radio. You usually have to manually update that yourself...
Click to expand...
Click to collapse
Yep that is the one I have. The search continues.
Sent from my PG86100 using XDA App
One more thing: If you haven't done it since flashing to Xron RC1, update your Profile in System Updates. I have seen others with signal/message issues after a root and fresh rom install...
Good luck!
SpartanEvo said:
One more thing: If you haven't done it since flashing to Xron RC1, update your Profile in System Updates. I have seen others with signal/message issues after a root and fresh rom install...
Good luck!
Click to expand...
Click to collapse
Got it fixed. I tried a bunch of stuff and nothing worked so I unrooted and relocked hboot then re-revolutionary'd, and now it works lol
Sent from my PG86100 using XDA App
So, here's the link
www.tiamat-dev.com
click evo 3D, click DL name, done. Also, check out the awesome changelog.
EDIT: lol. I guess it really is public visit thread in the dev section.
http://forum.xda-developers.com/showthread.php?t=1264224
I don't know why I even made this thread. Carry on.
#ducefail
Does anyone know the ups/downs of using the new Tiamat AOSP 1.1.0 on Cyanogenmod?
woooohooooooooo!!!
yousefak said:
Does anyone know the ups/downs of using the new Tiamat AOSP 1.1.0 on Cyanogenmod?
Click to expand...
Click to collapse
no idea about specifics, but in general, newer is better also, read the changelog, maybe has fixes for AOSP?
Thanks for the heads up Duce!
Sent from the CM powered 3d
Thanks Duce, I'm good with my EVO 3D but saw a kernel for my wife's EVO that has been having battery drain problems.
Its got a smooth user experience but benchmarks like a brick. Ill hafta see how battery life is
Sent from my PG86100 using XDA Premium App
thanx for the update even though 1.0.3 wasnt bad at all i was getting good battery life so hope this one is the same but with 1.0.3 i couldnt overclock to 1.8, i couldnt get pass 1.786
thanks for the post duce
Thanks Duce!
Cm7 Evo 3D
Anybody else experiencing FC of many programs after installing this kernel? It seemed fine for roughly an hour, but then most, if not all, of my applications would FC. Went back to 1.03 and no longer experiencing the FC.
Sent from my PG86100 using Tapatalk
Ayryyn said:
Anybody else experiencing FC of many programs after installing this kernel? It seemed fine for roughly an hour, but then most, if not all, of my applications would FC. Went back to 1.03 and no longer experiencing the FC.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
fix permissions in recovery, might fix, and yes I had that.
Anyone else's WiFi not working? Mine is unable to scan.
Sent from my PG86100 using XDA App
cosine83 said:
Anyone else's WiFi not working? Mine is unable to scan.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
try wipe dalvik and reflash kernel, wifi working fine here.
You have to fix permissions and wipe all data...then partition SD card to exterior 4
Its odd I have been using stock Kernel with warm and its been smooth sailing ..saw some good 2.3.4 oc Kernels (tiamats and ziggys) and gave tthem a shot ..they both run great but for some reason Bork my stock music player which I actually like and uuse often at the gym and as a music player in my car ..it just force closes when i try to open it..been using poweramp ftm
This kernel good for GSM 3VO?
Sent from my HTC ShooterU using XDA App
BrockFerens said:
This kernel good for GSM 3VO?
Sent from my HTC ShooterU using XDA App
Click to expand...
Click to collapse
NO. there aren't any GSM evo3D kernels, since HTC hasn't released the kernel source. Go blast them on twitter and facebook.
il Duce said:
try wipe dalvik and reflash kernel, wifi working fine here.
Click to expand...
Click to collapse
I always wipe dalvik with a kernel flash. I'm also on Synergy 509.
Oh, shame 1.0.3 works.
Sent from my HTC ShooterU using XDA App
So I've been running rc1 since it was release but I'm thinking about trying the rc3 update. I just finished downloading the rc3 updated rom but what a the best way to flash, wipe data etc and what about the addons? I tried finding some flashing specifics but there are just too many pages to filter thru on the Dec page.
Sent from my SAMSUNG-SGH-I717 using xda premium
nash2000 said:
So I've been running rc1 since it was release but I'm thinking about trying the rc3 update. I just finished downloading the rc3 updated rom but what a the best way to flash, wipe data etc and what about the addons? I tried finding some flashing specifics but there are just too many pages to filter thru on the Dec page.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
There have been some issues with RC3 ygst DaGr8 is working on. He solved the major inescapable and is currently working to get the ROM stable.
I would wait for RC4.
Don't forget to hit Thanks!
Sent from my SAMSUNG-SGH-I717R using xda premium
since there are a lot of changes from release to release, the best way to flash is obviously a full wipe, then flash...
I have been running rc3 for a few days with ZERO issues, so feel free to flash it now
GR8CDNPumpkin said:
There have been some issues with RC3 ygst DaGr8 is working on. He solved the major inescapable and is currently working to get the ROM stable.
I would wait for RC4.
Don't forget to hit Thanks!
Sent from my SAMSUNG-SGH-I717R using xda premium
Click to expand...
Click to collapse
I was planing on staying away from the rc3 but I thought it was pulled and reworked than released...I guess I was wrong, thought the current rc3 was the fully stable ready to go version. I'm content with rc1, ill wait for rc4.
Sent from my SAMSUNG-SGH-I717 using xda premium
wase4711 said:
since there are a lot of changes from release to release, the best way to flash is obviously a full wipe, then flash...
I have been running rc3 for a few days with ZERO issues, so feel free to flash it now
Click to expand...
Click to collapse
RC3 has issues like exchange service and dpi issues. Contacts FC'ing. Samsung Calendar as well. These FC's occur after applying the tablet ui. (except exchange which happens from the get go.)
I want tablet mode so that's why I am waiting.
Sent from my Samsung i717R using XDA Premium. Hit Thanks if I've helped.
i don't use exchange, so I deleted the app, so no fc's for me; also, don't use tablet mode; need larger fonts, so thats not an issue for me either
no issues with calendar or anything else for me
GR8CDNPumpkin said:
There have been some issues with RC3 ygst DaGr8 is working on. He solved the major inescapable and is currently working to get the ROM stable.
I would wait for RC4.
Don't forget to hit Thanks!
Sent from my SAMSUNG-SGH-I717R using xda premium
Click to expand...
Click to collapse
Are you really hurting for LIKES that bad? .....this site is becoming more and more resembling Facebook...lmao
wish777 said:
Are you really hurting for LIKES that bad? .....this site is becoming more and more resembling Facebook...lmao
Click to expand...
Click to collapse
now THIS deserves a thanks.....
if you have to ask/beg for a thanks, you don't deserve one..
besides, who gives a damn about how many thanks they have???
if you are helpful, you will get them, NOT by asking/begging for them...
wish777 said:
Are you really hurting for LIKES that bad? .....this site is becoming more and more resembling Facebook...lmao
Click to expand...
Click to collapse
Haha! I just wanted more than 1
Sent from my Samsung i717R using XDA Premium.
wase4711 said:
now THIS deserves a thanks.....
if you have to ask/beg for a thanks, you don't deserve one..
besides, who gives a damn about how many thanks they have???
if you are helpful, you will get them, NOT by asking/begging for them...
Click to expand...
Click to collapse
I believe there are moderators to patrol the forums. Many good developers do ask for Thanks.
Edit: Not saying I am one.
Sent from my Samsung i717R using XDA Premium.
Upvotes and karma for all of you.
Sent from my SAMSUNG-SGH-I717 using XDA