Hey people, so what wifi speed do you get with your x10 mini?
The test :
First connection 30 MB Download / 3 MB Upload , distance router from mini 2-3 meters.
Speed : from 20292 to 23404 kbps Download , from 3009 to 3169 kbps Upload , ping 37 to 47 , kernel : nAa-08 , Rom GingerDX.v021b. See attachment FirstCon.png
Secound connection 50 MB Download / 5 MB Upload , distance router from mini more 7 meters end 1 wall.
Speed : from 19560 to 20617 kbps Download , from 5087 to 5107 kbps Upload, ping 19 to 59 , kernel : nAa-11 , Rom MiniCM7 2.2.0 . See attachemnts secound.png , kern1 , kern2.
Related
speed ur net speed by this method Add these lines to your ROM's build.prop. Which can be found under '/system/build.prop'.
ro.ril.hep=1
ro.ril.hsxpa=2
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.hsupa.category=5
ro.ril.enable.3g.prefix=1
after that u update attach file from flash recovery then reboot ur phone
3 of that lines already in minicm build.prop
update zip will make it double on build.prop,
did this make a gprs fast too? cos my 3g always down. thanx
yes it work like magic for this u all 8 line should be in to your ROM's build.prop. Which can be found under '/system/build.prop reboot phone check ur net speed from speedtest.apk which u install from market
ur net speed work like this Explanation
ro.ril.hsxpa = indicates hsxpa support of target network :
Code:
ro.ril.hsxpa=0 - UMTS r99
ro.ril.hsxpa=1 - HSDPA
ro.ril.hsxpa=2 - HSDPA/HSUPA
ro.ril.gprsclass = inidcates GPRS class of target network :
Code:
Class 2 : 3 slots : 8 - 12 kbps upload / 16 - 24 kbps download
Class 4 : 4 slots : 8 - 12 kbps upload / 24 - 36 kbps download
Class 6 : 4 slots : 24 - 36 kbps upload / 24 - 36 kbps download
Class 8 : 5 slots : 8 - 12 kbps upload / 32 - 40 kbps download
Class 10 : 5 slots : 16 - 24 kbps upload / 32 - 48 kbps download
Class 12 : 5 slots : 32 - 48 kbps upload / 32 - 48 kbps download
More info Here
ro.ril.hsdpa.category =
Code:
Cat 1 = 1.2 Mbit/s
Cat 2 = 1.2 Mbit/s
Cat 3 = 1.8 Mbit/s
Cat 4 = 1.8 Mbit/s
Cat 5 = 3.6 Mbit/s
Cat 6 = 3.6 Mbit/s
Cat 7 = 7.2 Mbit/s
Cat 8 = 7.2 Mbit/s
Cat 9 = 10.1 Mbit/s
Cat 10 = 14.0 Mbit/s
Cat 11 = 0.9 Mbit/s
Cat 12 = 1.8 Mbit/s
Cat 13 = 17.6 Mbit/s
Cat 14 = 21.1 Mbit/s
Cat 15 = 23.4 Mbit/s
Cat 16 = 27.9 Mbit/s
Cat 19 = 35.3 Mbit/s
Cat 20 = 42.2 Mbit/s
Cat 21 = 23.4 Mbit/s
Cat 22 = 27.9 Mbit/s
Cat 23 = 35.3 Mbit/s
Cat 24 = 42.2 Mbit/s
Cat 25 = 46.8 Mbit/s
Cat 26 = 55.9 Mbit/s
Cat 27 = 70.6 Mbit/s
Cat 28 = 84.4 Mbit/s
ro.ril.hsupa.category =
Code:
Cat 1 = 0.73 Mbit/s
Cat 2 = 1.46 Mbit/s
Cat 3 = 1.46 Mbit/s
Cat 4 = 2.93 Mbit/s
Cat 5 = 2.00 Mbit/s
Cat 6 = 5.76 Mbit/s
Cat 7 = 11.5 Mbit/s
Not speed related, but still nice to have :
ro.ril.enable.3g.prefix : adds the 3G prefix to the operator name.
ro.ril.enable.dtm : Only set this to 1 if your network allows simultaneous transfer of Circuit switched (CS) voice and Packet switched (PS) data over the same radio channel (ARFCN).
Dude your english is a little messy, kinda hard to understand the steps..
One question though, what does the attachment for? Isn't editing the build prop enough to make it work?
read my build prop. and write the 8 line. in ur build prop
Hello Xda-fans, I'm newbie to use android, And I want to change my android with custom ROM, the problem is, anybody dont know abaout my tablet, is this because my tablet is made from China. So Anybody will help me to find my tablet custom rom? Pliss.. I so so bored with my tablet..
my tablet spesification is
Axioo picopad 7 GGG with
CPU : Qualcom SnapDragon MSM 8225 (1.0 Ghz) Dual Core ,
GPU : Andrino 203 |
OS : Android ICS 4.0.4 | ( I wonder that my tablet can run to Jelly Bean)
Screen : 7", 1024x600 Pixels TFT 5 point capacitive touch |
Memory : 512MB, Storage : 4GB |
Battery : Li Polymer 2600mAh |
Camera : Camera (0.3MP front 2.0 Mpx(back) |
Connectivity : > GPRS : Class 12
> EGDE : Class 12
> 3G : WCDMA 7.2 Mbps
> WLAN : Wi-Fi 802.11 b/g/n
>Bluetooth : Yes, v 2.1
Pliss help me,,,
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
is it rooted yet?
Hello, i have same device with you too. Axioo Picopad 7 GGG
Is your device rooted alreay?
If it isn't yet, try to search "framaroot.apk" on Google.
It is application that allow you to root your device and it's
very easy to root with this app. No need to be confused.
It works on mine.
When your device is already rooted, you can do experiment
and custom your device as much as you want.
Happy rooting.
p.s: By the way, i was looking for the stock and custom rom for this device too, and it seems there are very seldom people that have this device too, i only could find custom rom for another series of Axioo Picopad 7 (like GGC, BGT, and GGD) except GGG like what we have.
But don't worry, as long as you are already rooting your device, no need to find custom rom, i think.
please..
samakura said:
Hello Xda-fans, I'm newbie to use android, And I want to change my android with custom ROM, the problem is, anybody dont know abaout my tablet, is this because my tablet is made from China. So Anybody will help me to find my tablet custom rom? Pliss.. I so so bored with my tablet..
my tablet spesification is
Axioo picopad 7 GGG with
CPU : Qualcom SnapDragon MSM 8225 (1.0 Ghz) Dual Core ,
GPU : Andrino 203 |
OS : Android ICS 4.0.4 | ( I wonder that my tablet can run to Jelly Bean)
Screen : 7", 1024x600 Pixels TFT 5 point capacitive touch |
Memory : 512MB, Storage : 4GB |
Battery : Li Polymer 2600mAh |
Camera : Camera (0.3MP front 2.0 Mpx(back) |
Connectivity : > GPRS : Class 12
> EGDE : Class 12
> 3G : WCDMA 7.2 Mbps
> WLAN : Wi-Fi 802.11 b/g/n
>Bluetooth : Yes, v 2.1
Pliss help me,,,
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
my tablet is same of u, do you know how to enter recovery mode?
Hello mates i need a stock ROM/Firmware for my device(tablet) because it stuck in logo only
Here is the specs of my tablet
CLOUDPAD 801 TV SPECS
CPU : 1.2 GHz Quad Core
WLAN : WiFi 802.11b/g/n
Bluetooth : Yes, 3.0
USB : Yes
Camera
Memory
Card slot : microSD, up to 32 GB
Internal : 8 GB ROM, 1 GB RAM
Data
GPRS : Yes
EDGE : Yes
Speed : HSPA+
Primary : 8 MP
Features : Autofocus, Flash
Video : Yes
Secondary : VGA
OS : Android 4.2 Jelly Bean
Chipset : MTK8389
Messaging : SMS (threaded view), MMS, Email, Push Email
Browser : HTML
FM : Yes
GPS : Yes
Call : Yes
Video : Yes
Wifi Hotspot : Portable Hotspot
Colors : Dark Blue
TV : Yes
Battery
Capacity : 4000 mAh
same problem bro blackscreen vibrate only...........we need the official firmware of our cloudpad 801tv
hhmmmm
hope this helps, I was just googling for cloudpad 801tv i want to buy for my mom, I came across this link - https://www.google.com.ph/url?sa=t&...=ylAQZtq5Xi6Efm-vDOnveg&bvm=bv.80185997,d.dGc
I hope it's the right one
Hello
i have a phone with the following specs :
model number : sm-n9100 (china model)
android version : 4.4.4
based version : N9100ZCU1ANIG
kernel version : 3.10.0-2828982
build number : KTU84P.N9100ZCU1ANIF
custom build version : KTU84P1107
hardware : mt6572 / 8 core / 3 ghz
gpu : adreno 330
the problem is in games, always when i open a game it crash after 1 min then this 1 min decreases each time i start the game again until the game crash just after it open (after opening the game 4-5 times) then i have to restart my phone to go back for a full 1 min .
note:
1- i didnt change anything in my phone (frimware , rom , .... etc ) because i dont know about this
2- my phone is rooted.
i need help to solve this problem please
thnx in advance
Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock