Hello mates i need a stock ROM/Firmware for my device(tablet) because it stuck in logo only
Here is the specs of my tablet
CLOUDPAD 801 TV SPECS
CPU : 1.2 GHz Quad Core
WLAN : WiFi 802.11b/g/n
Bluetooth : Yes, 3.0
USB : Yes
Camera
Memory
Card slot : microSD, up to 32 GB
Internal : 8 GB ROM, 1 GB RAM
Data
GPRS : Yes
EDGE : Yes
Speed : HSPA+
Primary : 8 MP
Features : Autofocus, Flash
Video : Yes
Secondary : VGA
OS : Android 4.2 Jelly Bean
Chipset : MTK8389
Messaging : SMS (threaded view), MMS, Email, Push Email
Browser : HTML
FM : Yes
GPS : Yes
Call : Yes
Video : Yes
Wifi Hotspot : Portable Hotspot
Colors : Dark Blue
TV : Yes
Battery
Capacity : 4000 mAh
same problem bro blackscreen vibrate only...........we need the official firmware of our cloudpad 801tv
hhmmmm
hope this helps, I was just googling for cloudpad 801tv i want to buy for my mom, I came across this link - https://www.google.com.ph/url?sa=t&...=ylAQZtq5Xi6Efm-vDOnveg&bvm=bv.80185997,d.dGc
I hope it's the right one
Related
Hi;
I have WOHTC A70 tablet phone. I tried everything what I found about rooting but I coulnd root it. Can someone help about my problem ?
Thanks
here is specifications ;
CPU MT6573 dual core(ARM11 650M+Modem ARM7 280M)
RAM 512MB DDR2
ROM 512MB (Maximum Support 32GB Micro sd card)
OS Google Android 2.3
Camera dual camera, face 0.3M, front 2.0M mega pixel, flashlight
Wifi IEEE 802.11 b/g/n
GPS Built-in
Bluetooth B/T 2.1 + EDR
3G Dual SIM card, WCDMA+GSM
and
Model number : e1107_v73_ht_84g
Android : 2.3.6
Main bant version : MAUI.11AMD.W11.37.SP.V17.F1,2012/03/14 16:54
Core Versiyon : 2.6.35.7
Custom Built Version : 1333248561
Hello Xda-fans, I'm newbie to use android, And I want to change my android with custom ROM, the problem is, anybody dont know abaout my tablet, is this because my tablet is made from China. So Anybody will help me to find my tablet custom rom? Pliss.. I so so bored with my tablet..
my tablet spesification is
Axioo picopad 7 GGG with
CPU : Qualcom SnapDragon MSM 8225 (1.0 Ghz) Dual Core ,
GPU : Andrino 203 |
OS : Android ICS 4.0.4 | ( I wonder that my tablet can run to Jelly Bean)
Screen : 7", 1024x600 Pixels TFT 5 point capacitive touch |
Memory : 512MB, Storage : 4GB |
Battery : Li Polymer 2600mAh |
Camera : Camera (0.3MP front 2.0 Mpx(back) |
Connectivity : > GPRS : Class 12
> EGDE : Class 12
> 3G : WCDMA 7.2 Mbps
> WLAN : Wi-Fi 802.11 b/g/n
>Bluetooth : Yes, v 2.1
Pliss help me,,,
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
is it rooted yet?
Hello, i have same device with you too. Axioo Picopad 7 GGG
Is your device rooted alreay?
If it isn't yet, try to search "framaroot.apk" on Google.
It is application that allow you to root your device and it's
very easy to root with this app. No need to be confused.
It works on mine.
When your device is already rooted, you can do experiment
and custom your device as much as you want.
Happy rooting.
p.s: By the way, i was looking for the stock and custom rom for this device too, and it seems there are very seldom people that have this device too, i only could find custom rom for another series of Axioo Picopad 7 (like GGC, BGT, and GGD) except GGG like what we have.
But don't worry, as long as you are already rooting your device, no need to find custom rom, i think.
please..
samakura said:
Hello Xda-fans, I'm newbie to use android, And I want to change my android with custom ROM, the problem is, anybody dont know abaout my tablet, is this because my tablet is made from China. So Anybody will help me to find my tablet custom rom? Pliss.. I so so bored with my tablet..
my tablet spesification is
Axioo picopad 7 GGG with
CPU : Qualcom SnapDragon MSM 8225 (1.0 Ghz) Dual Core ,
GPU : Andrino 203 |
OS : Android ICS 4.0.4 | ( I wonder that my tablet can run to Jelly Bean)
Screen : 7", 1024x600 Pixels TFT 5 point capacitive touch |
Memory : 512MB, Storage : 4GB |
Battery : Li Polymer 2600mAh |
Camera : Camera (0.3MP front 2.0 Mpx(back) |
Connectivity : > GPRS : Class 12
> EGDE : Class 12
> 3G : WCDMA 7.2 Mbps
> WLAN : Wi-Fi 802.11 b/g/n
>Bluetooth : Yes, v 2.1
Pliss help me,,,
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
my tablet is same of u, do you know how to enter recovery mode?
Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.
Hi
i would flash my old tablet with rom stock, but i not found there.
can you help me ?
antutu data :
Brand : ALPS
model : SH-7208
Board : N932
Material : mt6572
Android : 4.2.2
CPU : VFPv4,Neon (dual core ARMv7 Processor)
GPU : Mali-400 MP
thanks for your help
Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock