After a failed update, no programs recognize my RAZR, and I could not make it work, until I decided to read the file. XML ROM folder that was downloaded.
I tried using RSD Lite but without success, always gave errors 1/20, 13/20.
I tried one last action: executed line by line what was done by the XML file I downloaded from the SBF http://forum.xda-developers.com/showthread.php?t=1362956 topic.
I created a. Bat file with the contents
Code:
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot reboot-bootloader
moto-fastboot erase cache
moto-fastboot erase userdata
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash radio radio.img
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed"
moto-fastboot flash cdrom cdrom_signed"
moto-fastboot flash preinstall preinstall"
moto-fastboot flash webtop webtop_signed"
moto-fastboot
I put the folder where you extracted the file "Branding: en.BR VIVO," along with the files from ADB + moto.fastboot.exe, and run the .BAT after connecting the phone in fastboot mode.
Okay, my phone went back to the LIVE STOCK ROM
sry for my bad english, i use translator in some parts
So this gets you back to dead stock vivo? Couldn't you just use fastboot?
Sent from my miui xt910
xxBrun0xx said:
So this gets you back to dead stock vivo? Couldn't you just use fastboot?
Sent from my miui xt910
Click to expand...
Click to collapse
His RSD lite in AP fastboot got damaged. There's a similar script by kholk as an alternative to moto flashing tool.
Thanks
Sent from my XT910 using Tapatalk 2
magraun said:
After a failed update, no programs recognize my RAZR, and I could not make it work, until I decided to read the file. XML ROM folder that was downloaded.
I tried using RSD Lite but without success, always gave errors 1/20, 13/20.
I tried one last action: executed line by line what was done by the XML file I downloaded from the SBF http://forum.xda-developers.com/showthread.php?t=1362956 topic.
I created a. Bat file with the contents
I put the folder where you extracted the file "Branding: en.BR VIVO," along with the files from ADB + moto.fastboot.exe, and run the .BAT after connecting the phone in fastboot mode.
Okay, my phone went back to the LIVE STOCK ROM
Click to expand...
Click to collapse
Hi
I have same problem.....RSD Always error 3/21....
i want flash "SPDIRD-40_MEA_RT_1C.91P_CFC_P2B_Signed.xml.zip"
Can you share me .Bat File.....
Thanks
Ok
finally find moto-fastboot...and flash frimware with fastboot command
but Always error on writing "mbmloader".........who know,why?
I have very big problem, delete every data on internal mass memory after rebooting phone.....also remove any installed app's after reboot phone
or remove old app's from phone,but old app's back to phone after reboot
so,i can't change anything..like data,app's.etc....Also i can't change firmware version after flashing new firmware
EX: my phone have a 2.3.5 (65.1.12.XT910.MERetail.en.06------Build 6.5.1_73-spd-ird-12) BUT After flash with 2.3.6 (6.5.1-167-SPD-IRD-40) I HAVE STILL OLD FIRMWARE
Please help me...mu phone is dead
BABAK236 said:
Ok
finally find moto-fastboot...and flash frimware with fastboot command
but Always error on writing "mbmloader".........who know,why?
I have very big problem, delete every data on internal mass memory after rebooting phone.....also remove any installed app's after reboot phone
or remove old app's from phone,but old app's back to phone after reboot
so,i can't change anything..like data,app's.etc....Also i can't change firmware version after flashing new firmware
EX: my phone have a 2.3.5 (65.1.12.XT910.MERetail.en.06------Build 6.5.1_73-spd-ird-12) BUT After flash with 2.3.6 (6.5.1-167-SPD-IRD-40) I HAVE STILL OLD FIRMWARE
Please help me...mu phone is dead
Click to expand...
Click to collapse
Try to read this if RSD doesnt work:
http://forum.xda-developers.com/showthread.php?t=1453660
elias.parasini said:
Try to read this if RSD doesnt work:
http://forum.xda-developers.com/showthread.php?t=1453660
Click to expand...
Click to collapse
Hi
Of Course Try this,but not solve my problem
i did try with fastboot command,,,all file's writed but always error when run this:
moto-fastboot flash mbmloader mbmloader.bin
Code:
sending 'mbmloader' (42 KB)... OKAY [ 0.016s]
writing 'mbmloader'... INFOCommand restricted
FAILED (remote: )
BABAK236 said:
Ok
finally find moto-fastboot...and flash frimware with fastboot command
but Always error on writing "mbmloader".........who know,why?
I have very big problem, delete every data on internal mass memory after rebooting phone.....also remove any installed app's after reboot phone
or remove old app's from phone,but old app's back to phone after reboot
so,i can't change anything..like data,app's.etc....Also i can't change firmware version after flashing new firmware
EX: my phone have a 2.3.5 (65.1.12.XT910.MERetail.en.06------Build 6.5.1_73-spd-ird-12) BUT After flash with 2.3.6 (6.5.1-167-SPD-IRD-40) I HAVE STILL OLD FIRMWARE
Please help me...mu phone is dead
Click to expand...
Click to collapse
I have the same EXACT problem! It is strange when I delete apps and wipe data, but after reboot it comes back. Have you had any luck on resolving this???
BABAK236 said:
Hi
Of Course Try this,but not solve my problem
i did try with fastboot command,,,all file's writed but always error when run this:
moto-fastboot flash mbmloader mbmloader.bin
Code:
sending 'mbmloader' (42 KB)... OKAY [ 0.016s]
writing 'mbmloader'... INFOCommand restricted
FAILED (remote: )
Click to expand...
Click to collapse
sory for delay
check this line: moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin.
your file probably have another name, like "allow_mbmloader_flashing_mbm.bin"
Related
Hello,
I have problem with flashing stock firmware on my atrix 4g.
RSD -lite return error:
Failed flashing process. Unable to retrieve interface handle. (0x7027).
Thats happens when I would go back to stock firmware from CM7.
Before running RSD flashing, I was execute following fastboot commands:
fastboot erase boot
fatsboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase osh
fastboot erase logo
fastboot erase radio
Before 2-3 times mentioned above method without erase radio commands not return any errors with RSD flashing. And have not any problem.
Can anybody advice and help me ?
Thanks for help and advice.
Solved
alcpis said:
Hello,
I have problem with flashing stock firmware on my atrix 4g.
RSD -lite return error:
Failed flashing process. Unable to retrieve interface handle. (0x7027).
Thats happens when I would go back to stock firmware from CM7.
Before running RSD flashing, I was execute following fastboot commands:
fastboot erase boot
fatsboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase osh
fastboot erase logo
fastboot erase radio
Before 2-3 times mentioned above method without erase radio commands not return any errors with RSD flashing. And have not any problem.
Can anybody advice and help me ?
Thanks for help and advice.
Click to expand...
Click to collapse
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot.
2. Power on phone and select fastboot
3. execute: fastboot flash radio bp.img, Where bp.img baseband image files
4. execute: fastboot reboot
5. Phone automatically boot on the android recovery mode
6. Wipe userdata/cache
7. Reload in RSD mode
8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Thanks.
alcpis said:
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot.
2. Power on phone and select fastboot
3. execute: fastboot flash radio bp.img, Where bp.img baseband image files
4. execute: fastboot reboot
5. Phone automatically boot on the android recovery mode
6. Wipe userdata/cache
7. Reload in RSD mode
8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Thanks.
Click to expand...
Click to collapse
Can you be a bit more specific on syntax used. I have the atrix baseband img in the fastboot folder and all is good but I get a "cannot load" error. The name of the baseband img file is baseband_OTA.img So with that in mind how would my commands look? I have typed fastboot flash radio baseband.img. I get the error saying it cannot load the file.
Hello I inadvertently flashed his XT910 XML firmware 4.1.2 for XT912. The telephone does not work. I tried unbrick, but it does not work, does not start recovery. Runs only bootloader error "Invalid CG OTV".
Help restore the phone, please.
Thank you!
I am sorry for my bad English, I use Google Translate
UPD:
Through RSD Lite to flash now can only XT912 JB.
The phone turns on, but does not load launcher etc.
Other firmware via RSD not even installed. An error "failed flashing process 13/18 flash system".
I got that error too, try downloading the file again ut was a bad download or corrupted file...
Sent from my XT910 using xda premium
Steven87 said:
I got that error too, try downloading the file again ut was a bad download or corrupted file...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, this does not resolve the problem.
I think we should wait for the XML JB XT910.
I had the same problem, i switched from ICS to JB.vodafone and kept my root with Voodoo root keeper. One time my phone got into bootloop after restart (messed with build.prop a bit ).
Well i flashed a lot of stupid firmwares over RSD even x912 jellybean fastboot files on my x910 . But it just doesnt work
So a guy came to XDA forums and wrote this http://forum.xda-developers.com/showthread.php?t=2194825 I fallowed this instruction and got unbricked
I lost my Root, but i can atleast use my phone, which is more important :victory:
So there is one more side note to this tutorial
(as i flashed all sorts of files into my phone by trying to unbrick it, my partitions were a mess so)
So Before You use HDA-Pilot's instructions flash all partitions that you still have access to by hand.
Download EuroperRETAIL fastboot files that HDA gives you in his thread and flash with fastboot like this:
->fastboot flash recovery recovery.img
->fastboot flash cdrom cdrom_signed.img
...........
.....
...
Do this too all files and you will get error on system_signed and Boot.img, but your partitions will be ready to house euRetail JB and you will get System and Boot flashed on HSD-Pilot's tutorial, just before unbricking your doodles
TeddyOFLove said:
I had the same problem, i switched from ICS to JB.vodafone and kept my root with Voodoo root keeper. One time my phone got into bootloop after restart (messed with build.prop a bit ).
Well i flashed a lot of stupid firmwares over RSD even x912 jellybean fastboot files on my x910 . But it just doesnt work
So a guy came to XDA forums and wrote this http://forum.xda-developers.com/showthread.php?t=2194825 I fallowed this instruction and got unbricked
I lost my Root, but i can atleast use my phone, which is more important :victory:
So there is one more side note to this tutorial
(as i flashed all sorts of files into my phone by trying to unbrick it, my partitions were a mess so)
So Before You use HDA-Pilot's instructions flash all partitions that you still have access to by hand.
Download EuroperRETAIL fastboot files that HDA gives you in his thread and flash with fastboot like this:
->fastboot flash recovery recovery.img
->fastboot flash cdrom cdrom_signed.img
...........
.....
...
Do this too all files and you will get error on system_signed and Boot.img, but your partitions will be ready to house euRetail JB and you will get System and Boot flashed on HSD-Pilot's tutorial, just before unbricking your doodles
Click to expand...
Click to collapse
Thank you very much for your reply!
Unfortunately, nothing happened. Maybe we did something wrong, I do not know.
superdeman said:
Thank you very much for your reply!
Unfortunately, nothing happened. Maybe we did something wrong, I do not know.
Click to expand...
Click to collapse
What region are you from?
Is it XT910 you are using?
Did you try to fallow HSD guide and flash FF manually before hand? If so then what happened what is the issue after doing so|?
TeddyOFLove said:
What region are you from?
Is it XT910 you are using?
Did you try to fallow HSD guide and flash FF manually before hand? If so then what happened what is the issue after doing so|?
Click to expand...
Click to collapse
Device regoin EMEA. I'm from Belarus.
Yes, i use XT910.
Tried to do the instructions, but after that nothing changes. Loaded only bootloader with an error partition system.
If you is not difficult, please write how you restore your phone, step by step with links.
I would be very grateful!
superdeman said:
Device regoin EMEA. I'm from Belarus.
Yes, i use XT910.
Tried to do the instructions, but after that nothing changes. Loaded only bootloader with an error partition system.
If you is not difficult, please write how you restore your phone, step by step with links.
I would be very grateful!
Click to expand...
Click to collapse
I will try. But remember this is all HSD-Pilots work, i only try to make it clear to you.
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
TeddyOFLove said:
I will try. But remember this is all HSD-Pilots work, i only try to make it clear to you.
1) download These fastboot files.rar (clink on text)
2)download retailEU. jellybean OTA
3)Download HSD-pilots UNBRICK.rar
4)UNRAR HSD-pilots UNBRICK.rar from step (3) to any new folder (lets name it UNBRICK)
5) UNRAR Fastboot files:
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
from step (1) to Folder from step (4) we named UNBRICK ONLY extract files i said
6)Connect your device to pc
7)open UNBRICK folder Hold shift and right click on white space -> then press OPEN COMMAND WINDOW HERE
8)flash files from step (5) by writing in the command window you opened:
mfastboot flash cdrom cdrom_signed
mfastboot flash cdt.bin cdt.bin_signed
mfastboot flash devtree devtree_signed
mfastboot flash ebr ebr_signed
mfastboot flash mbr mbr_signed
mfastboot flash recovery recovery_signed
mfastboot flash radio radio.img
9)with the phone still connected to PC open UNBRICK folder and tun Unbrick.bat.
10) after unbrick.rar flashed press power button once, and immediately hold volume up + volume down and press power again
11) go down to recovery and press volume up
12) when you just follow instructions in bat file. see android picture press volume down and volume up at the same time and wait for radio to install
13) after installation of radio wipe data and catch -> navigate to factory reset and do it
14) Then go to install update from external memory and install retailEU. jellybean OTA that you downloaded (you have to put it to your external SD card)
15) If all is fine it will update, just reboot and its unbricked
Click to expand...
Click to collapse
Thank you! Excellent manual! It's simple and clear.
But, unfortunately:
Code:
mfastboot flash cdt.bin cdt.bin_signed
sending 'cdt.bin' (16 KB)... OKAY [ 0.000s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
superdeman said:
Thank you! Excellent manual! It's simple and clear.
But, unfortunately:
Code:
mfastboot flash cdt.bin cdt.bin_signed
sending 'cdt.bin' (16 KB)... OKAY [ 0.000s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
Click to expand...
Click to collapse
Just ignore it
it doesnt matter as long as you fallow all at steps. the end should be unbricked, and it was bad tutorial just didnt have much time to make it easier to read.
i think cdt.bin was supposed to fail others will not, i just didnt remember the details as i did it week ago
So as i said just do it from start and copy all errors you get, as it may just be something i overlooked and it will still unbrick your phone hopefully, other wise we get more data on what might be wrong. Actually if you would agree on live session on team-viewer so i can control your pc and do it for you it would be ok too .
hi, i have an european gsm xt910 with deleted CID and verizion us jb (http://forum.xda-developers.com/showthread.php?t=2182674).
i've been using it for a couple of weeks with no problem, but today, after i turned off the phone, each time i try to turn it on it appears a black screen with the following white things (like the fastboot mode):
AP Fastboot Flash Mode (S) (Boot Failure)
0A.6c
To return to normal mode - first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OKto Program
Connect USB
Data Cable
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAV (CG: wbtop, status: 0X004E)
Invalid CG OTV (CG: webtop)
Click to expand...
Click to collapse
is it bricked? do i have to follow HDA-Pilot's instructions or is it something different since i deleted my CID (although i have a backup, i can't recover it because i can't boot into recovery)?
if there's another way to recover my phone with keeping root would be great, but of course it's better to have a working phone without root than a rooted brick
this evening i'm leaving for the whole weekend, so it would be awesome if you could answer me asap, so i can (hopefully!) fix my phone before departing. TY!
AW: Bricked XT910
http://forum.xda-developers.com/showthread.php?p=38189529
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
http://forum.xda-developers.com/showthread.php?p=38189529
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
thanks a lot man!! i solved it by simply running the whirleyes's razr_bl_mbm_*.zip you linked me to.
Me too! jeje
ok, i got a new message similar to the previous one. this is the situation:
i have an italian gsm xt910 with deleted CID and verizion us jb (http://forum.xda-developers.com/show....php?t=2182674) and i tried to install the CM10.1 xt910 version. i use BMM.
- during boot i went to BMM and restored CID
- wiped everything
- installed the lastest CM10.1 nightly (0430) + gapps
and after i booted the phone it appeared the following message:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OKto Program
Connect USB
Data Cable
Invalid CG HAB (CG: boot, status: 0X0056)
Click to expand...
Click to collapse
and i can't go to recovery anymore, since this message appears ASAP the phone starts. what happened? how can i fix this? ty in advance.
i found this thread (http://forum.xda-developers.com/showthread.php?t=2194825), but i'd rather not lose root + recover it using linux (never used linux), if it is possibile. is it enought to go here and install the retail UK firmware using RSD lite?
edit: ok i used rsd lite 6.15 + the UK JB firmware. now i'm fighting (using this thread) to gain my root rights back
Hello on the weekend that just passed my GSM RAZR's battery completely died and when I went to plug it in in the morning I was greeted with a black screen that reads:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.6C
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status 0X004E)
Invalid CG OTV (CG: webtop)
I am on the cyanogenmod JB 4.2.2 and it was working fine without any issue really. I also don't think my phone is charging because it will only turn on if I plug it into and outlet. If I plug it in my computer to attempt to use RSD I just get the white light in the notification light.
So I was wondering if anyone could be of any help because this is my main phone and I am out of communication for the time being until it gets fixed.
EDIT: Forgot to mention that I can get into stock recovery by holding the volume +/- down and plugging it into a wall charger but any option I select brings me back to a similar screen, sometimes missing the errors the other screen had at the bottom.
Çözümü için herhangi bir XT910 yada XT912 (cihazına göre) Gingerbread temelli bir rom'un içerisinden webtop_signed.img dosyasını çıkarın ve aşağıdaki komutla flashlayın.
fastboot flash webtop webtop_signed.img
http://motomodtr.forumcommunity.net/?t=53855516
same issue
I have same problem. Please help. I don't know how to use command "fastboot flash webtop webtop_signed.img"... Where type this command?
I am on Jellybean 4.2.2, not Ginergread. Anyone else with any help? And I plugged the phone in all night last night and now it can show the menu without being on charge.
[/COLOR]
RideR10 said:
I have same problem. Please help. I don't know how to use command "fastboot flash webtop webtop_signed.img"... Where type this command?
Click to expand...
Click to collapse
flash it in using the fastboot folder, just search for the file. put the webtop file in the folder, open the command window on the folder and run the command
TheMrcool212 said:
[/COLOR]
flash it in using the fastboot folder, just search for the file. put the webtop file in the folder, open the command window on the folder and run the command
Click to expand...
Click to collapse
If it help I describe my RAZR...
I have made dual boot with boot menu manager on my razr: 1. system is stock JB 4.1.2
2.system is AOKP 4.2.2
Everything works fine until I changed bootanimation on 2. system. After reboot phone reports this issue
I download ICS 4.0.4 file, but this fastboot file doesn't contain file "webtop_signed". After that I download Gingerbread fastboot file, where I found file "webtop_signed". Will this gingerbread "webtop_signed" work with JB ?
Where can i download that "fastboot folder"?
In advance thank for your help and sorry for my ENG
http://dl.projectlense.com/download.php?file=spyder/razr_bl_mbm_0a77.zip
Download and extract this. Connect in AP and run the bat.
Gesendet von meinem XT890 mit Tapatalk 2
---------- Post added at 07:23 PM ---------- Previous post was at 07:13 PM ----------
BTW: Everyone that uses BMM and still got the 0A.6... Bootloader should update it by using the linked file, to prevent those Webtop Issues!
Gesendet von meinem XT890 mit Tapatalk 2
Thank you for your help. :good: I spent nearly two days searching for solution.
thanks alot
i had the same problem and almost threw it out the window
now fixed :good:
Help Please
Hey i have the same problem where it say " AP fastboot flash mode (S) (boot failure)" I ran the windows bat file and it restarted the bootloader but the same problem still showed. Anybody have any ideas as to what im doing wrong or what else i can do? thanks
HSD-Pilot said:
dl. projectlense. com/download.php?file=spyder/razr_bl_mbm_0a77.zip
Download and extract this. Connect in AP and run the bat.
Click to expand...
Click to collapse
Are you sure that download link not expired? The website is no more available. Any new link from anyone?
I have the same problem, after flashing Magisk 15.3 form RR Nougat OS.
What should I do?
I'v got Droid RAZER Utility 1.8 and tried to roll back to stock ICS via Fastboot but it didn't fix it, where is 'devtree' error in log.
My next attempt was to flash it with RDS Lite but it doen's work under Windows 10, to now I'm trying to manually flash firmware from RAZR XT910 Firmwares SuperThread (Jelly Bean) with Droid utility moto-fastboot.exe command.
For 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip firmware it will be:
Code:
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot erase cache
moto-fastboot erase userdata
moto-fastboot erase emstorage
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash emstorage emstorage.img
moto-fastboot flash radio radio.img
But I keep getting battery low warning:
Code:
moto-fastboot flash mbmloader mbmloader.bin
sending 'mbmloader' (42 KB)... FAILED (remote: Battery Low)
How to charge MOTO if I can't get to system and recovery, I'm not sure if it's charging on fastboot screen.
vkmaxx said:
My next attempt was to flash it with RDS Lite but it doen's work under Windows 10, to now I'm trying to manually flash firmware from RAZR XT910 Firmwares SuperThread (Jelly Bean) with Droid utility moto-fastboot.exe command.
For 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip firmware it will be:
But I keep getting battery low warning:
How to charge MOTO if I can't get to system and recovery, I'm not sure if it's charging on fastboot screen.
Click to expand...
Click to collapse
Buy or make the factory cable...
https://forum.xda-developers.com/showthread.php?t=1077414
I was able to flash my phone with moto-fastboot.exe by NOT executing "moto-fastboot reboot-bootloader". This was the moment when after reboot phone was showing "low battery" warrning. After taking it from charger and not rebooting I was able to flash it.
Then Jelly Bean -> root -> SafeStrap - > LineageOS
Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
maybe you should tell more info about your device, brand,chipset, etc ?
so people can be more easy to help.
just newbie suggestion, ignore this if its no help xD
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
lolet said:
Looks like your system image file is corrupted cause its not mounted after loading kernel. What kind of filesystem the image is using?
Click to expand...
Click to collapse
The system image is not corrupted, because I can safely flash it using Clockworkmod. The filesystem is yaff2, and I have tried opening it using some software and my file is there. I think the problem lies on fastboot who failed flashing properly.
simple
yokowasis said:
Hi,
I have flash system.img file by using
Code:
D:\ADB\Android>fastboot flash system d:\backup\flash\system.img
sending 'system' (116302 KB)...
OKAY [114.524s]
writing 'system'...
OKAY [ 47.582s]
finished. total time: 162.108s
It seems normal to me, but the problem arise when I restart the the phone. The phone unable to boot, and when I try
Code:
ADB Shell
It says somethings like "sh" is not found. So I do reboot recovery go to the shell and mount /system. Shockingly there is nothing in there.
I have checked the contents of system.img, and there is a lot of things in there, including the "sh". But it seems fastboot failed to flash the system partition.
Anyone can help me ?
Click to expand...
Click to collapse
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
I stuck with my Mate 9 Error mode numbers 11 and 2
MEGHSHAH said:
ur work is simple...just plug in ur phone in fastboot mode...keep a boot.img file in the same folder that that of the fastboot folder....boot.img can be taken from ur STOCK ROM
and type ==
fastboot devices
then ur device will be shown.....
then type
fastboot flash boot boot.img
n its done!
Click to expand...
Click to collapse
I would like to tell you my problem, I have a Mate 9 MHA-L09C605B111 which I did a rebrand a while ago and I'm with CUST 432 and installed the version of Oreo 8.0.0.368, a few weeks ago I received the update 369 via OTA. It was interesting to try; the problem is that I had open bootloader, TWRP Pretorian 3.2.0 and Root, take a terrible decision to do a relock of the bootloader.
After several attempts and letting the battery drain I could enter Fastboot mode, I have the FRP unlocked and I could unlock the bootloader again, the problem is that I can not enter either the TWRP, or to recovery mode, try flashing again the same TWRP I had installed it well but still when I want to enter after passing the Huawei logo it remains on the white screen of ERROR MODE, Func NO: 11 (recovery image) Error NO: (image Failed!) Reading other forums and looking I have been told a lot by Internet that it is necessary to make the Dload method try it but it did not work, I understand that it does not work in this model but I still try it.
I also did a flash with all the files as I found in a tutorial
"When you have system extracted, flash it in fastboot using fastboot flash system system.img.
Do the same with KERNEL, extract and flash to fastboot flash kernel KERNEL.IMG
(BOOT is now split into RAMDISK and KERNEL)
Recovery was split to recovery_ramdisk, recovery_vendor and recovery_vbmeta
Boot was split into ramdisk and kernel
Recovery2 (erecovery) was split into erecovery_ramdisk, erecovery_kernel, erecovery_vendor and erecovery_vbmeta
fastboot flash ramdisk ramdisk.img. Kernel flashed as fastboot flash kernel kernel.img.
Recovery ramdisk as fastboot flash recovery_ramdisk recovery_ramdisk.img "
I'm still stuck on the same screen with error 11 and 2 I made the flash of the recovery that I used when I put version 368 are two MHA_RECOVERY_NoCheck.img and MHA_RECOVERY2_NoCheck.img both give Failed using the command Fastboot flash recovery_ramdisk RECOVERY_XXXX with both the same without using the _ramdisk command is equal I'm still stuck in the same state.
Does anyone have an idea that another method I can try?
I will thank you very much.
You can flash all * .img through ADB and in this case there is a specific order to do it, check several threads but I did not get an answer and search but I could not find anything, it is worth noting that when I flash files I mentioned before all OKAY but on power up it goes back to error 11 and 2 I have been told that it is a partition problem but I could not find something to recover them, there is some method that is missing or maybe an error in the steps I am doing ? I still can not access the TWRP but I can access without problems by ADB.
Xt910 RSD faild to flash, ap fastboot ( flash failure) or stuck on logo solution.
Dear Friends,
a customer brought to me a bricked razr maxx xt910 which he has been rooted and bricked . i have tried many time to flash it with RSD but it failed to be flashed. i tried eveything but with no success. finally thanx to doub01 who had the problem in this thread http://forum.xda-developers.com/showthread.php?t=1796712 and fixed his mobile.i tried his way and bingo, it works. i'll explain the way he used to help others fixing their xt910.
1. go here http://sbf.droid-developers.org/umts_spyder/list.php and download 01.6.5.1-73 for your country.
2. download also 01.6.7.2-180 for your country.
3. extract both of them.
4. copy webtop_signed from 01.6.5.1-73 and all the files from 01.6.7.2-180 and paste them in c:\fastboot ( if you dont have it google for moto fastboot )
5. start cmd and write these commands (but you have to wait each command to finish then write the next one.)
cd c:\fastboot
moto-fastboot flash webtop webtop_signed
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash radio radio.img
fastboot reboot
thats it. Good Luck and wish that will help you as it helped me.
P.s for those who has a battery problem while flashing, use a factory cable ( connect pin 1 to pin 4 )
Best Regards
Mazen
Nice work brother:thumbup:
My friend has a XT910 running 2.2.3 i am thinking of rooting it i dunno the procedure can you guide me and i am from india wt firmware should i download for XT910 is it possible to flash md5 files through odin and also can moto razr XT910 have cwm recovery???
Sent from my GT-I9505 using Tapatalk 2
Sorry man for being late. For rooting xt910 u can use droid utility. U cant install cwm cause the bootloader is locked. U can use an app called safestrap which works as the cwm. No you cant use odin for motorola while you can use RSD to flash sbf. I will guide you tomorrow on how to flash, root and cwm.
Sent from my GT-N7100 using Tapatalk 4 Beta
Sure brother waiting:thumbup:m very new to moto n hve a few issues will tell ya everything 2mrw
Sent from my GT-I9505 using Tapatalk 2
So, can anyone help here?
Flashing 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b 57374ab5a_p2b_S1FF_fb_CFC.xml via RSD Lite comes back with an error message "Failed flashing process. 6/19 flash cdt.bin cdt.bin_signed ->Phone returned FAIL"
Flashing via Fastboot comes with these messages:
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
0A3C0B8219013011 fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem lock
...
(bootloader) fastboot oem lock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.008s
C:\Program Files\Minimal ADB and Fastboot>fastboot erase recovery
erasing 'recovery'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.012s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery-0.99.
3
target reported max download size of 1056964608 bytes
error: cannot load 'recovery-0.99.3': No error
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery_signe
d
target reported max download size of 1056964608 bytes
sending 'recovery' (9216 KB)...
OKAY [ 0.448s]
writing 'recovery'...
(bootloader) Preflash validation failure
FAILED (remote: )
finished. total time: 0.929s
C:\Program Files\Minimal ADB and Fastboot>fastboot erase boot
erasing 'boot'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.016s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash boot boot_signed
target reported max download size of 1056964608 bytes
sending 'boot' (8192 KB)...
OKAY [ 0.399s]
writing 'boot'...
(bootloader) Preflash validation failure
FAILED (remote: )
finished. total time: 0.872s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>
Is there any way at all to recover from this issue?
Help please.
which one is for germany pls
i hang in fastboot flash failure
Same issue
Lincoln357 said:
So, can anyone help here?
Flashing 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b 57374ab5a_p2b_S1FF_fb_CFC.xml via RSD Lite comes back with an error message "Failed flashing process. 6/19 flash cdt.bin cdt.bin_signed ->Phone returned FAIL"
Flashing via Fastboot comes with these messages:
C:\Program Files\Minimal ADB and Fastboot>fastboot devices
0A3C0B8219013011 fastboot
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem lock
...
(bootloader) fastboot oem lock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.008s
C:\Program Files\Minimal ADB and Fastboot>fastboot erase recovery
erasing 'recovery'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.012s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery-0.99.
3
target reported max download size of 1056964608 bytes
error: cannot load 'recovery-0.99.3': No error
C:\Program Files\Minimal ADB and Fastboot>fastboot flash recovery recovery_signe
d
target reported max download size of 1056964608 bytes
sending 'recovery' (9216 KB)...
OKAY [ 0.448s]
writing 'recovery'...
(bootloader) Preflash validation failure
FAILED (remote: )
finished. total time: 0.929s
C:\Program Files\Minimal ADB and Fastboot>fastboot erase boot
erasing 'boot'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.016s
C:\Program Files\Minimal ADB and Fastboot>fastboot flash boot boot_signed
target reported max download size of 1056964608 bytes
sending 'boot' (8192 KB)...
OKAY [ 0.399s]
writing 'boot'...
(bootloader) Preflash validation failure
FAILED (remote: )
finished. total time: 0.872s
C:\Program Files\Minimal ADB and Fastboot>fastboot oem unlock
...
(bootloader) fastboot oem unlock disabled!
FAILED (remote: )
finished. total time: 0.009s
C:\Program Files\Minimal ADB and Fastboot>
Is there any way at all to recover from this issue?
Help please.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I have the same issue. My phone was rooted and had custom rom(s). Yesterday I managed to brick it and since then can't figure out how to unbrick it. Keep having same problems as him..
Thanks
jdorfsman said:
I have the same issue. My phone was rooted and had custom rom(s). Yesterday I managed to brick it and since then can't figure out how to unbrick it. Keep having same problems as him..
Thanks
Click to expand...
Click to collapse
The only way I could manage to unbrick it is by deleting CID. After that, flashed stock rom via RSD Lite, first stock ICS 4.0.4 then upgraded to JB 4.1.2, installed Safestrap 3.65 and flashed few custom roms and everything worked like a charm. Before deleting CID, nothing, and I mean NOTHING worked, always aborting flashing process at step 6 (cdt.bin). Tried every known method and nothing worked. I was ready to sell the Razr for parts or something, but I had nothing to lose so I deleted CID and voila! Worked like a charm. Search my posts here, there is a step-by-step guide on how to do it.
another source for stock rom images?
mazen_al_ahmar said:
Xt910 RSD faild to flash, ap fastboot ( flash failure) or stuck on logo solution.
Dear Friends,
a customer brought to me a bricked razr maxx xt910 which he has been rooted and bricked . i have tried many time to flash it with RSD but it failed to be flashed. i tried eveything but with no success. finally thanx to doub01 who had the problem in this thread http://forum.xda-developers.com/showthread.php?t=1796712 and fixed his mobile.i tried his way and bingo, it works. i'll explain the way he used to help others fixing their xt910.
1. go here http://sbf.droid-developers.org/umts_spyder/list.php and download 01.6.5.1-73 for your country.
2. download also 01.6.7.2-180 for your country.
3. extract both of them.
4. copy webtop_signed from 01.6.5.1-73 and all the files from 01.6.7.2-180 and paste them in c:\fastboot ( if you dont have it google for moto fastboot )
5. start cmd and write these commands (but you have to wait each command to finish then write the next one.)
cd c:\fastboot
moto-fastboot flash webtop webtop_signed
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash radio radio.img
fastboot reboot
thats it. Good Luck and wish that will help you as it helped me.
P.s for those who has a battery problem while flashing, use a factory cable ( connect pin 1 to pin 4 )
Best Regards
Mazen
Click to expand...
Click to collapse
Is there another soruce for stock images?
I can't find mine there.. (Israel stock rom)
What's CID
Lincoln357 said:
The only way I could manage to unbrick it is by deleting CID. After that, flashed stock rom via RSD Lite, first stock ICS 4.0.4 then upgraded to JB 4.1.2, installed Safestrap 3.65 and flashed few custom roms and everything worked like a charm. Before deleting CID, nothing, and I mean NOTHING worked, always aborting flashing process at step 6 (cdt.bin). Tried every known method and nothing worked. I was ready to sell the Razr for parts or something, but I had nothing to lose so I deleted CID and voila! Worked like a charm. Search my posts here, there is a step-by-step guide on how to do it.
Click to expand...
Click to collapse
Sorry, don't understand what the CID is that you're deleting. Would you mind expanding the acronym?
Thanks,
Deepesh
deepesh_wig said:
Sorry, don't understand what the CID is that you're deleting. Would you mind expanding the acronym?
Thanks,
Deepesh
Click to expand...
Click to collapse
CID stands for Customer ID which is preventing you to flash other firmware than the one which is meant for your country/region. By deleting CID via Fastboot, your phone becomes "unlocked" to flash any firmware world wide. That's how I unbricked my phone.
Bricked Motorola XT910 indonesia version
Good day everyone..
I having a trouble about my motorola xt910 i'd rooted the devices using EPRJ easy root multi os, and i installed CWM via razzrtouchblack i followed the step by step process, then i enter the CWM mode with razzrtouchblack make a backup of my current rom. i intend to install cm 10.1 rom and follow the installation process instruction, and ended in black screen after M logo, i tried to enter cwm recovery mode by pressing power and vol - button but cant enter the recovery mode, im trying to enter fastboot mode hold power + Vol up/down for 10 sec but cant enter it neither. i browse many instruction but they all included fastboot rds and adb method which require a fastboot mode is on. this is my first time experience cant fix a boot stuck problem. i really need help from anyone who had fix a same problem like me.
thank you, Before and after.
Problem Solved
Kanisius said:
Good day everyone..
I having a trouble about my motorola xt910 i'd rooted the devices using EPRJ easy root multi os, and i installed CWM via razzrtouchblack i followed the step by step process, then i enter the CWM mode with razzrtouchblack make a backup of my current rom. i intend to install cm 10.1 rom and follow the installation process instruction, and ended in black screen after M logo, i tried to enter cwm recovery mode by pressing power and vol - button but cant enter the recovery mode, im trying to enter fastboot mode hold power + Vol up/down for 10 sec but cant enter it neither. i browse many instruction but they all included fastboot rds and adb method which require a fastboot mode is on. this is my first time experience cant fix a boot stuck problem. i really need help from anyone who had fix a same problem like me.
thank you, Before and after.
Click to expand...
Click to collapse
After an hours of observation and search all other probability via google and xda, i solved the problem... the boot loop is caused by unfinished installing cm 10.1 in my main system, and the clockworkmod recovery useless at all to help since it cant be booted to cwm recovery by any methods if the devices were boot loop while the battery are in minimal power so the Fastboot mode is unreachable to prevent me doing a uncompleted flashing roms via rsd lite. so i let the phone in boot loop show the M logo untill the battery drains out, iwhen it switched off cause of no more battery power i plugin the charger into the phone and let it charging for 10 hours +/- then the fastboot can be entered so i can flash the device with a stock rom. even there is no one who answer my question im grateful with xda and all the senior and developer thread who helped me to resurrect my device.
Viva XDA
Mazen
You are the KING I buy the beer from now on!!
Dear Friends,
a customer brought to me a bricked razr maxx xt910 which he has been rooted and bricked . i have tried many time to flash it with RSD but it failed to be flashed. i tried eveything but with no success. finally thanx to doub01 who had the problem in this thread http://forum.xda-developers.com/showthread.php?t=1796712 and fixed his mobile.i tried his way and bingo, it works. i'll explain the way he used to help others fixing their xt910.
1. go here http://sbf.droid-developers.org/umts_spyder/list.php and download 01.6.5.1-73 for your country.
2. download also 01.6.7.2-180 for your country.
3. extract both of them.
4. copy webtop_signed from 01.6.5.1-73 and all the files from 01.6.7.2-180 and paste them in c:\fastboot ( if you dont have it google for moto fastboot )
5. start cmd and write these commands (but you have to wait each command to finish then write the next one.)
cd c:\fastboot
moto-fastboot flash webtop webtop_signed
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash radio radio.img
fastboot reboot
thats it. Good Luck and wish that will help you as it helped me.
P.s for those who has a battery problem while flashing, use a factory cable ( connect pin 1 to pin 4 )
Best Regards
Mazen[/QUOTE]
Can't find the image from the link you have specified
Hi,
I also have similar problem(got the device bricked and battery dead due to wrong rooting steps), I even got the factory cable created and I can see AP fastboot OK to program.
the link (http://forum.xda-developers.com/showthread.php?t=1796712 ) you have given is showing 404 error
Can you please guide me towards right image
my phone is being purchased in india(I guess its Asian version)
Please let me know, If any other information is required.
Thank you very much in advance
mazen_al_ahmar said:
Xt910 RSD faild to flash, ap fastboot ( flash failure) or stuck on logo solution.
Dear Friends,
a customer brought to me a bricked razr maxx xt910 which he has been rooted and bricked . i have tried many time to flash it with RSD but it failed to be flashed. i tried eveything but with no success. finally thanx to doub01 who had the problem in this thread http://forum.xda-developers.com/showthread.php?t=1796712 and fixed his mobile.i tried his way and bingo, it works. i'll explain the way he used to help others fixing their xt910.
1. go here http://sbf.droid-developers.org/umts_spyder/list.php and download 01.6.5.1-73 for your country.
2. download also 01.6.7.2-180 for your country.
3. extract both of them.
4. copy webtop_signed from 01.6.5.1-73 and all the files from 01.6.7.2-180 and paste them in c:\fastboot ( if you dont have it google for moto fastboot )
5. start cmd and write these commands (but you have to wait each command to finish then write the next one.)
cd c:\fastboot
moto-fastboot flash webtop webtop_signed
moto-fastboot flash cdt.bin cdt.bin_signed
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr_signed
moto-fastboot flash mbr mbr_signed
moto-fastboot flash devtree devtree_signed
moto-fastboot flash system system_signed
moto-fastboot flash boot boot_signed
moto-fastboot flash recovery recovery_signed
moto-fastboot flash cdrom cdrom_signed
moto-fastboot flash radio radio.img
fastboot reboot
thats it. Good Luck and wish that will help you as it helped me.
P.s for those who has a battery problem while flashing, use a factory cable ( connect pin 1 to pin 4 )
Best Regards
Mazen
Click to expand...
Click to collapse
The links are dead, can someone upload the files, 01.6.5.1-73 and 01.6.7.2-180?
tttony said:
The links are dead, can someone upload the files, 01.6.5.1-73 and 01.6.7.2-180?
Click to expand...
Click to collapse
I have just 6.7.2-180
https://mega.co.nz/#!8E02RZwI!Md8-HLx3ha8ZBVRjoVcy_iCdCr8teBceTG09S_To31E
Sent from my Razr XT910
tttony said:
The links are dead, can someone upload the files, 01.6.5.1-73 and 01.6.7.2-180?
Click to expand...
Click to collapse
Did you look here http://motofirmware.center/files/category/10-spyder-umts/
---------- Post added at 07:48 PM ---------- Previous post was at 07:48 PM ----------
or http://web.archive.org/web/20130817173904/http://sbf.droid-developers.org/umts_spyder/list.php
Thanks for the links
The links from archive.org works, but while downloading the file, the download fails, I tried like four times and always shows an error, that can't download the file
Then I downloaded this 6.5.1-167_SLC-M37_SIGNLATAM_USASPYDMVSGEB1B2B5B8B8LA030.0R_USASPYMOVVZ0LA_P009_c672bbd997_HWp2b_CFC_fastboot.xml firmware from motofirmware (the phone it's from Movistar Venezuela)
But like many others firmwares that I tried, RSD shows an error: cdt.bin_signed failed!
Now I'm trying to delete the cid like Lincoln357 did, but this phone it's locked, cant unlock the bootloader so cant delete cid
Code:
>mfastboot oem get_unlock_data
...
FAILED (remote: unsupported command)
finished. total time: 0.007s
Code:
> mfastboot erase cid
erasing 'cid'...
Command restricted
FAILED (remote: )
finished. total time: 0.011s
At the end of this story.. this phone it's dead, cant unbrick...
Several more Flashing options posted in
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
---------- Post added at 02:50 PM ---------- Previous post was at 02:49 PM ----------
M fastboot
House of moto....