Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
why are you migrating yourself from no problems to problems,
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
amodj said:
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
Click to expand...
Click to collapse
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
engloa said:
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Oh that is sad ! Speedmod was the best kernel that I had on GB. That is why I wanted to try out the ICS version.
zaheedahmed said:
why are you migrating yourself from no problems to problems,
Click to expand...
Click to collapse
Because I haven't found a sweet spot yet. That is why I am experimenting with different kernels.
zaheedahmed said:
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
Click to expand...
Click to collapse
Will post in the speedmod thread. Just wanted to know if this was a generic problem with all kernels or just speedmod specific.
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
thracemerin said:
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
Click to expand...
Click to collapse
Whoops ! missed that ! Thanks a lot
Related
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Is it going to brick my phone?
Please help
xReal said:
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Follow the instructions flash is either via Odin or CWM .
Is it going to brick my phone?
Not if its the correct kernel .
jje
Click to expand...
Click to collapse
what does correct kernel mean? some kernel that has that same KG2 / kg3/ etc stuff with your stock kernel?
JJEgan said:
xReal said:
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Follow the instructions flash is either via Odin or CWM .
Is it going to brick my phone?
Not if its the correct kernel .
jje
Click to expand...
Click to collapse
How to know which kernel is correct?
As of now I am using Sensation rom which has Siyah kernel 2.5.2 and I want to flash speedmod kernel or N.E.A.K. Kernel,
N.E.A.K. Kernel only supports sammy roms
I tried to search but I could not find out if Sensation rom is aosp or sammy do you have any idea of it?
also does speedmod kernel support both as nothing it written about it on its thread
Thanks
Click to expand...
Click to collapse
xReal said:
How to know which kernel is correct?
As of now I am using Sensation rom which has Siyah kernel 2.5.2 and I want to flash speedmod kernel or N.E.A.K. Kernel,
N.E.A.K. Kernel only supports sammy roms
I tried to search but I could not find out if Sensation rom is aosp or sammy do you have any idea of it?
also does speedmod kernel support both as nothing it written about it on its thread
Thanks
Click to expand...
Click to collapse
Normally on the first page of a rom thread you will get a description what is the rom. For example MIUI is well MIUI. Hyperdroid is sammy deodex rom with of course modifications and tweaks in the build to make it better than stock.
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not. Siyah works basically with any rom. CM7 to AOSP to sammy deodex. Regarding Simone's kernel which is the NEAK version or something like that it is based on only sammy stock deodex roms and that is mainly the ones in original development and android..just look out for deodex, sammy and stock rom
AS above its all a question of reading the info on the first page of the kernel post .
Plus if it does not work flash another one .
the Neak kernel should be ok been on mine for a few days .
Speedmod likewise ok have used it before .
jje
Thanks everyone for their wonderful help!
I have got one last question
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
does this means it will not work with sensation rom?
Edit: ok looks like the different versions are just the updated ones
But still the question is if it supports sensation rom?
xReal said:
Thanks everyone for their wonderful help!
I have got one last question
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
does this means it will not work with sensation rom?
Edit: ok looks like the different versions are just the updated ones
But still the question is if it supports sensation rom?
Click to expand...
Click to collapse
DroidTrix said:
Normally on the first page of a rom thread you will get a description what is the rom. For example MIUI is well MIUI. Hyperdroid is sammy deodex rom with of course modifications and tweaks in the build to make it better than stock.
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not. Siyah works basically with any rom. CM7 to AOSP to sammy deodex. Regarding Simone's kernel which is the NEAK version or something like that it is based on only sammy stock deodex roms and that is mainly the ones in original development and android..just look out for deodex, sammy and stock rom
Click to expand...
Click to collapse
JJEgan said:
AS above its all a question of reading the info on the first page of the kernel post .
Plus if it does not work flash another one .
the Neak kernel should be ok been on mine for a few days .
Speedmod likewise ok have used it before .
jje
Click to expand...
Click to collapse
Dude. Did you even read these two responses from DroidTrix and JJEgan?
ctomgee said:
Dude. Did you even read these two responses from DroidTrix and JJEgan?
Click to expand...
Click to collapse
Yes indeed I have.
Am I missing anything?
Please elaborate your reply
Also please keep in mind that I have no experience of this so It might be a bit difficult for me to understand
xReal said:
Yes indeed I have.
Am I missing anything?
Please elaborate your reply
Also please keep in mind that I have no experience of this so It might be a bit difficult for me to understand
Click to expand...
Click to collapse
*sigh*
Ok.
DroidTrix said:
DroidTrix said:
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not.
Click to expand...
Click to collapse
"Sammy deodex" means that the the ROM is based on Samsung stock.
DroidTrix ALSO said:
DroidTrix said:
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not.
Click to expand...
Click to collapse
AND, JJEgan said:
JJEgan said:
AS above its all a question of reading the info on the first page of the kernel post.
Click to expand...
Click to collapse
You yourself said:
xReal said:
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
Click to expand...
Click to collapse
Now, if you look at the VERY FIRST page for SensatioN ROM,, it says:
SensatioN ROM Features:
-Based on Samsung Firmware XWKK5 Android 2.3.6
With all of this information, you should be able to deduce that the Speedmod kernel WILL work with your ROM. If you still don't understand, I'm going to suggest you don't flash anything to your phone, for fear of ending up with a paperweight.
Ok this time I understand everything
I didn't knew that Sammy roms means that the ROM is based on Samsung's stock ROM
Also I thought that speedmod only works on stock ROM so all this things got me confused
But anyways now its all clear
xReal said:
Ok this time I understand everything
I didn't knew that Sammy roms means that the ROM is based on Samsung's stock ROM
Also I thought that speedmod only works on stock ROM so all this things got me confused
But anyways now its all clear
Click to expand...
Click to collapse
Sammy is short for Samsung.
I didn't want to have this get lost in my other threads so I decided to make a new one.
These kernel's have the necessary in-call patch to work for our phones. I have attached a flashable zip so you can flash the I9100 ROM (Only for LPH based ROMs) of your choice and then flash this kernel.
LPQ for MIUIv4 2.3.23 - With NO Screen on/off bug (GO THANK ENTROPY FOR SHARING THE SCREEN ON/OFF BUG FIX)
http://www.mediafire.com/?dudijtd8tfv0a40
Download Siyah Alpha 4 LPH Kernel
http://www.mediafire.com/?bpgwjlwxbip0530
Download Siyah Alpah 5 LPJ Kernel
http://www.mediafire.com/?h896v0a6k6f3nc9
Download Stock LPH Kernel
http://www.mediafire.com/?f975cdr387e2f15
Download Stock LPQ Kernel
http://www.mediafire.com/download.php?7acfc0r5df142d1
Samsung based Modems Link
http://forum.xda-developers.com/showthread.php?t=1361393
CM7/MIUI based Modems Link
http://forum.xda-developers.com/showthread.php?t=1336958
Steps
1. Do usual wipes
2. Flash a I9100 ROM that is LPH based (pretty sure it is only Sammy based ROM's right now)
3. Flash my kernel.
4. Flash a Modem from our I777 collection.
4. Reboot.
LPQ ROM's verified working on with LPQ kernel
1. CriskeloServanTeam V05
Sammy ROM's verified working on with stock kernel (Thanks cjsabaki)
1. Wanam lite ics rom (has a phone apk with no noise suppression)
2. ICS resurection (It is flawless, has everything working, including: camera, video, usb, external_sd)
AOSP ROM's verified working on with Siyah kernel (Thanks cjsabaki)
1. MIUI v4
2. CM9
3. AOKP Hydro1.5 ROM
4. Bezke's AOKP build
This does not fix the in-call Noise Suppression issue, that is a modification to Phone.apk so be forewarned
Click "Thanks" if you like what you see or donate with my link.
See Entropy's thread/links here that showed me the way to getting the kernel to work on our phone:
http://forum.xda-developers.com/show....php?t=1512900
http://forum.xda-developers.com/show...&postcount=204
http://forum.xda-developers.com/show...8&postcount=26
reserved.....
Are any of these modded pics kernels overclockable?
Sent from my GT-I9100 using xda premium
Smacdallas said:
Are any of these modded pics kernels overclockable?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Haven't tried, give it a try let us know.
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
cjsabaki said:
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thanks for the reminder about modem, adding to OP.
probably a dumb question, but screen still flash on and still only 2 of the keys work?
PuffinNugz said:
probably a dumb question, but screen still flash on and still only 2 of the keys work?
Click to expand...
Click to collapse
Same issues till we get source
kinda figured, but was just hoping...
This is the same kernel from your CM9 thread, right?
cjsabaki said:
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
ICS Resurrection is pretty darn nice so far. I'm pleasantly surprised. Thanks for the kernel to make this possible, ktoonsez!
Sent from my GT-I9100 using xda premium
eep2378 said:
This is the same kernel from your CM9 thread, right?
Click to expand...
Click to collapse
No, CM9 is sitll on LP6.
ktoonsez said:
No, CM9 is sitll on LP6.
Click to expand...
Click to collapse
Ok thanks, I'm staying on AOKP for now
gonna try this out
I'm gonna try this out but want to make sure I flash the correct modem. Where do I get the KJ4 modem that will work for LPH releases? I've found the Modem post in the original development section and the CM9 modems that task650 posted in the CM9 i777 post. I'd appreciate anybody's proper guidance.
I tried Siyah's ICS 3.0alpha3 for just testing fun last night (knowing calls won't work - just playing), and it had a much smoother scrolling/UI screen feel to it. Would it be possible for you (ktoonsez) to combine / share your collected mods on getting the ICS kernel to work on our i777 phones with gokhanmoral, so he could offer up a Siyah version for our phones? Just wondering... thanks... appreciate all you do for us man!
mpkothari said:
I'm gonna try this out but want to make sure I flash the correct modem. Where do I get the KJ4 modem that will work for LPH releases? I've found the Modem post in the original development section and the CM9 modems that task650 posted in the CM9 i777 post. I'd appreciate anybody's proper guidance.
Click to expand...
Click to collapse
Take your preferred modem from here : http://forum.xda-developers.com/showthread.php?t=1361393
Then follow op instructions. Basically, Wipe data, flash ICS LPH rom of your choice, flash gapps, flash this kernel, flash your modem, reboot
FYI, I flashed Westcrip's rom earlier this morning using the above mentioned flashing process without issue. I actually prefer Bezke's AOKP look and feel so I went back
jaxf250 said:
I tried Siyah's ICS 3.0alpha3 for just testing fun last night (knowing calls won't work - just playing), and it had a much smoother scrolling/UI screen feel to it. Would it be possible for you (ktoonsez) to combine / share your collected mods on getting the ICS kernel to work on our i777 phones with gokhanmoral, so he could offer up a Siyah version for our phones? Just wondering... thanks... appreciate all you do for us man!
Click to expand...
Click to collapse
Yes I can hack his kernel so it will work with ours. Looks like he is on alpha 4 now. Does anyone know how to contact him, probably should contact him before doing it?
EDIT:
Whihk ROM or ROM's did you use it on?
Also be aware, since there are no sources yet (direct quote from his site):
Warning: this is not a compiled kernel but only a repack of cfroot kernel. only initramfs part is modified until the sources are out.
ktoonsez said:
Yes I can hack his kernel so it will work with ours. Looks like he is on alpha 4 now. Does anyone know how to contact him, probably should contact him before doing it?
EDIT:
Whihk ROM or ROM's did you use it on?
Also be aware, since there are no sources yet (direct quote from his site):
Warning: this is not a compiled kernel but only a repack of cfroot kernel. only initramfs part is modified until the sources are out.
Click to expand...
Click to collapse
Thanks that would be cool if you two could collaborate. I am currently on latest AOKP rom. Alpha 4 (whatever is most current) would be the one to integrate. I am happy to test before you release - just pm me the details. Thanks!
Sent from my GT-I9100 using xda premium
Tried Resurrection and Wanam as well as Cm9 and aokp. I liked the cm9 and akop but no adobe flash support. That's a must for me.
I'm back to Wanam now, it seemed more stable than Resurrection. It's been fun playing with these. Thanks to you guys that have made this possible.
I'll see how this does on battery over the long run now.
Sent from my GT-I9100 using xda premium
Just want to say thanks for developing and sharing this. I've been experimenting with a few different roms today thanks to this kernel. Thanks again.
Hi,
I have BT problems. While connected to my car stereo (Sony MEX-BT3900U) for a while, the phone reboots itself. After reboot the phone doesn't automatically connects to car stereo, I have to manually reconnect. I'm using the Official ICS rom (I9100DXLP7).
This occurs during audio stream & call.
Tnx for any sugestions.
Phil
Root you phone and change you kernel
tnx
Tnx for the quick reply, will try it tonight...
078gregory said:
Root you phone and change you kernel
Click to expand...
Click to collapse
I'm aware this is a noob question, but I think don't really grasp the complete flashing process:
The only thing I did was flash ROM I9100DXLP7 with Odin. I wasn't aware the kernel had to be updated manually.
Should I root first using CF-Root v5.4 LPQ, and then flash the Separate Kernel: Download (.TAR)? Both files are listed:
http://forum.xda-developers.com/showthread.php?t=1544487
tnx for your help...
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
hamz22 said:
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
Click to expand...
Click to collapse
To be honest, I find your reply rather depressing...but hey, it seems you are right...I rooted, installed the kernel....nothing changed..
thanks for the info..
hamz22 said:
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
Click to expand...
Click to collapse
I guess I'm going back to the good old 2.3.5....
philz03 said:
I guess I'm going back to the good old 2.3.5....
Click to expand...
Click to collapse
I forgot to mention that this bug has happened on every ICS build i have tried right up to XXLPQ. I have just noticed there have been two releases since then, XWLP2 being the latest. i'm gonna try it and will report back with the results.
philz03 said:
I'm aware this is a noob question, but I think don't really grasp the complete flashing process:
The only thing I did was flash ROM I9100DXLP7 with Odin. I wasn't aware the kernel had to be updated manually.
It does not its part of the firmware and root wont fix the problem either .
Although a custom kernel with a built in fix for the problem could be the answer .
jje
Click to expand...
Click to collapse
JJEgan said:
Although a custom kernel with a built in fix for the problem could be the answer .
jje
Click to expand...
Click to collapse
good call. i'm downloading LP2 as we speak and if this does not fix the problem then I'll give one of Siyah's new beta kernels a shot as well.
EDIT: I have installed LP2 and Bluetooth streaming to the car stereo still results in a reboot after approx 15 minutes. Flashed Siyah Kernel 3.0b6 and that didn't help either. back to GB i guess.
Good news everyone!!!!!! I have found the fix! Just load following kernel (using Odin): SiyahKernel v3.0.1 (Posted on April 8, 2012). this kernel can be found at http://www.gokhanmoral.com/ . All credit go to the devolpper of the kernel.
Cheers,
Phil
philz03 said:
Good news everyone!!!!!! I have found the fix! Just load following kernel (using Odin): SiyahKernel v3.0.1 (Posted on April 8, 2012). this kernel can be found at http://www.gokhanmoral.com/ . All credit go to the devolpper of the kernel.
Cheers,
Phil
Click to expand...
Click to collapse
Sorry but it isn't a solution. I have installed the last siyah kernel, 3.1rc6 and my phone keep on rebooting every about 15 minutes if it paired with my sony car audio system.
Has anyone found a solution?
I have the same problem. I'm using Wlp8
DULP9 and its still broken. god this sucks. im tired of having to use the slow and battery hungry GNex cos it's bluetooth, of course, works fine with my car stereo
SOLVED!!!! well for me the fix was using a CM9 based ROM. F1 Galaxy Nexus to be exact. I was able to stream via bluetooth for well over 90 minutes without any problems whatsoever. I hope this will help someone out there.
From what I can tell from some thread I found somewhere else using google, it seems that any custom rom running 4.0.4 works fine, seems to be somehow related to Samsungs 4.0.3 rom and any roms based on it (not sure about 4.0.3 roms NOT based on the Samsung rom).
jamieridler said:
From what I can tell from some thread I found somewhere else using google, it seems that any custom rom running 4.0.4 works fine, seems to be somehow related to Samsungs 4.0.3 rom and any roms based on it (not sure about 4.0.3 roms NOT based on the Samsung rom).
Click to expand...
Click to collapse
According to me, you are completely right.
Inviato dal mio GT-I9100 usando Tapatalk
My 2c.
I am having the same issues. With the ROM XXLPW the problem stopped, but this ROM is not smooth and battery friendly as XWLPD that I was using before.
Today I flashed XWLPG and guess what? The reboots came back!
Where is the Bluetooth related files? Maybe using the XXLPW in the XWLPG or XWLPD we can have a trouble free ROM and smooth at the same time.
delca85 said:
According to me, you are completely right.
Inviato dal mio GT-I9100 usando Tapatalk
Click to expand...
Click to collapse
Hi delca ! i am italian too!
have you find a solution for streaming bluetooth with our sony stereo?
thanks
marcello
marci4na said:
Hi delca ! i am italian too!
have you find a solution for streaming bluetooth with our sony stereo?
thanks
marcello
Click to expand...
Click to collapse
Marcello there are 3 solutions
1. given that XWLPM firmware is based on Android 4.0.4 this *might* solve the problem (i no longer have a GS2 to verify) Beware! I *think* this rom may have the dreaded "brick bug" that could permanently damage your phone. Do NOT install CWM recovery with this rom!!!!
2. install a ROM based on CynaogenMod 9 or AOKP. both are also based on Android 4.0.4
3. If you must stay on a Samsung stock ROM then downgrade to Gingerbread.
I'm pretty sure nothing else would work. I sure hope the Galaxy S3 stock roms dont have this bug as im really considering getting one this week
Hi,
For the past while i was getting the SOD only using Siyah based kernels and Phenomenal was working fine for me, but after updating to version 6.1 my phone has started to switch off again. Is this a problem with hardware and do i need to send the phone away for repair or can it be fixed by myself some other way?
I have went back to Phenomenal 5,5 kernel and am waiting to see if i still get the problem.
Cheers.
jpopgt said:
Hi,
For the past while i was getting the SOD only using Siyah based kernels and Phenomenal was working fine for me, but after updating to version 6.1 my phone has started to switch off again. Is this a problem with hardware and do i need to send the phone away for repair or can it be fixed by myself some other way?
I have went back to Phenomenal 5,5 kernel and am waiting to see if i still get the problem.
Cheers.
Click to expand...
Click to collapse
What rom are you on? Can you refer to the thread in my sig for the info you need to include to get results.
Sent from my Nexus 7 using xda premium
kilometers4 said:
What rom are you on? Can you refer to the thread in my sig for the info you need to include to get results.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Hello,
I have tried just about all the latest ICS and JB roms......
The make of your phone. There are many different variants of your device. I9100 G/M/P/T
Are you rooted/unrooted?
What rom you are using? -and- What kernel are you using?
Have you flashed any mods/scripts/themes?
Have you changed DPI? If yes, to what?
I have a UK T-Mobile Samsung Galaxy S II I9100XXLQ6
I am rooted
I was Dual Booting with SuperNexus JB Build 2 and Portal Rom 2.4 using the latest siyah kernel and i got the SOD using SuperNexus, i then removed The second rom and used the ultimate kernel cleaning script to remove Siyah and installed Phenomenal 6.1 with Portal Rom and i got the SOD a day later.
I am not using any mods or extra scripts
I have not changed the dpi
I noticed this problem when i first tried a dual boot a few months ago but has been stable until now only with Phenomenal 5.5. i have tried the other siyah based kernels and i still got the SOD.
Yesterday i flashed the Phenomenal 5.5 along with Portal rom and it's been fine so far but i can get 2-4 days before it happens then it happens a few times daily after the first SOD.
EDIT: Thats it switched off again. Think i will need to send it in for repair?
i have just updated to the lastest cm10.1 nightly update today and when i re-flash siyah 1.8.6 all sorts of problems breaks loose.
the cyanogen bootup logo was extremely slow and when the phone eventually booted up it was unusably lagging.
i has to restore from a backup and when i tried to reinstall siyah again, the same thing happens. I think i am correct to assume that it is the kernel that is causing the problems.
i am now using the stock cm kernal but i am missing the fact i can overclock my beast
anyone else having this issue and will it be fixed on further cm updates or will it be a siyah updating issue??
Thanks
kennyc1980 said:
i have just updated to the lastest cm10.1 nightly update today and when i re-flash siyah 1.8.6 all sorts of problems breaks loose.
the cyanogen bootup logo was extremely slow and when the phone eventually booted up it was unusably lagging.
i has to restore from a backup and when i tried to reinstall siyah again, the same thing happens. I think i am correct to assume that it is the kernel that is causing the problems.
i am now using the stock cm kernal but i am missing the fact i can overclock my beast
anyone else having this issue and will it be fixed on further cm updates or will it be a siyah updating issue??
Thanks
Click to expand...
Click to collapse
20130113*
kennyc1980 said:
20130113*
Click to expand...
Click to collapse
Have you installed 1st or 2nd rom ?
Have you tried the new update ? (Siyah 1.8.7)
Problem verifyed with: Yank.555 1.4, Siyah 1.8.6
Do not install these kernels with the latest CM10.1 nightly (13. jan) - use stock or Siyah 1.8.7 instead
This is quite strange because I use the Rom ReVolt 3.3.3 available here.
It uses Android 4.2.1 and I have Siyah Kernel 1.8.6.
So there might be a sort of compatibility ...
I have upgraded to the 1.8.7 and its fixed the problem ;]
Sent from my GT-I9300 using xda app-developers app
So with the 1.8.7 you can use the kernel on cm 10.1 ?
Sent from my GT-I9300 using Tapatalk 2
ruskat said:
So with the 1.8.7 you can use the kernel on cm 10.1 ?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes only as primair rom
daveve said:
Yes only as primair rom
Click to expand...
Click to collapse
But Gokhanmoral's website says "cm10.1 is now supported in dual-boot configurations" with the latest 1.8.7 build.