i have just updated to the lastest cm10.1 nightly update today and when i re-flash siyah 1.8.6 all sorts of problems breaks loose.
the cyanogen bootup logo was extremely slow and when the phone eventually booted up it was unusably lagging.
i has to restore from a backup and when i tried to reinstall siyah again, the same thing happens. I think i am correct to assume that it is the kernel that is causing the problems.
i am now using the stock cm kernal but i am missing the fact i can overclock my beast
anyone else having this issue and will it be fixed on further cm updates or will it be a siyah updating issue??
Thanks
kennyc1980 said:
i have just updated to the lastest cm10.1 nightly update today and when i re-flash siyah 1.8.6 all sorts of problems breaks loose.
the cyanogen bootup logo was extremely slow and when the phone eventually booted up it was unusably lagging.
i has to restore from a backup and when i tried to reinstall siyah again, the same thing happens. I think i am correct to assume that it is the kernel that is causing the problems.
i am now using the stock cm kernal but i am missing the fact i can overclock my beast
anyone else having this issue and will it be fixed on further cm updates or will it be a siyah updating issue??
Thanks
Click to expand...
Click to collapse
20130113*
kennyc1980 said:
20130113*
Click to expand...
Click to collapse
Have you installed 1st or 2nd rom ?
Have you tried the new update ? (Siyah 1.8.7)
Problem verifyed with: Yank.555 1.4, Siyah 1.8.6
Do not install these kernels with the latest CM10.1 nightly (13. jan) - use stock or Siyah 1.8.7 instead
This is quite strange because I use the Rom ReVolt 3.3.3 available here.
It uses Android 4.2.1 and I have Siyah Kernel 1.8.6.
So there might be a sort of compatibility ...
I have upgraded to the 1.8.7 and its fixed the problem ;]
Sent from my GT-I9300 using xda app-developers app
So with the 1.8.7 you can use the kernel on cm 10.1 ?
Sent from my GT-I9300 using Tapatalk 2
ruskat said:
So with the 1.8.7 you can use the kernel on cm 10.1 ?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes only as primair rom
daveve said:
Yes only as primair rom
Click to expand...
Click to collapse
But Gokhanmoral's website says "cm10.1 is now supported in dual-boot configurations" with the latest 1.8.7 build.
Related
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
why are you migrating yourself from no problems to problems,
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
amodj said:
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
Click to expand...
Click to collapse
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
engloa said:
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Oh that is sad ! Speedmod was the best kernel that I had on GB. That is why I wanted to try out the ICS version.
zaheedahmed said:
why are you migrating yourself from no problems to problems,
Click to expand...
Click to collapse
Because I haven't found a sweet spot yet. That is why I am experimenting with different kernels.
zaheedahmed said:
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
Click to expand...
Click to collapse
Will post in the speedmod thread. Just wanted to know if this was a generic problem with all kernels or just speedmod specific.
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
thracemerin said:
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
Click to expand...
Click to collapse
Whoops ! missed that ! Thanks a lot
Very happy with V2.1 but interested in trying out V2.2.
So, is it possible to upgrade from Resurrection Remix V2.1 to V2.2 without having to go through all the hassle of reinstalling apps and settings? Also can I retain the Siyah kernel rather than changing to CM9 kernel?
Cheers
Transpiror said:
Very happy with V2.1 but interested in trying out V2.2.
So, is it possible to upgrade from Resurrection Remix V2.1 to V2.2 without having to go through all the hassle of reinstalling apps and settings? Also can I retain the Siyah kernel rather than changing to CM9 kernel?
Cheers
Click to expand...
Click to collapse
well ma8 u can upgrade 2 rr2.2 without any wipes since u dont have any issue with 2.1 and after that u have 2 flash siyah kernel of ur choice again since v2.2 comes with CM9 kernel
ps- please make a nandroid bkp of ur exsisting v2.1 in case u need it later
run a cleaner
Transpiror said:
Very happy with V2.1 but interested in trying out V2.2.
So, is it possible to upgrade from Resurrection Remix V2.1 to V2.2 without having to go through all the hassle of reinstalling apps and settings? Also can I retain the Siyah kernel rather than changing to CM9 kernel?
Cheers
Click to expand...
Click to collapse
before changing to a different kernel
it's recommended to use this kernel cleaning script
http://forum.xda-developers.com/showthread.php?t=1363738
good luck
Transpiror said:
Very happy with V2.1 but interested in trying out V2.2.
So, is it possible to upgrade from Resurrection Remix V2.1 to V2.2 without having to go through all the hassle of reinstalling apps and settings? Also can I retain the Siyah kernel rather than changing to CM9 kernel?
Cheers
Click to expand...
Click to collapse
Yea just make a nandroid backup and flash 2.2 over 2.1 without wiping data. And if if it changes your kernel just flash siyah again
Sent from my GT-I9100 using xda premium
Stoked, so to make a nandroid backup do I simply use CWM provided with the current ROM? I've found the kernel cleaning script useful in the past due to weird overheating associated with cooked voltage settings
Is the CM9 recovery console (for flashing) similar to siyah? As I would have thought Odin is a last resort due to that pesky yellow triangle
Sent from my GT-I9100 using XDA
Transpiror said:
Stoked, so to make a nandroid backup do I simply use CWM provided with the current ROM? I've found the kernel cleaning script useful in the past due to weird overheating associated with cooked voltage settings
Is the CM9 recovery console (for flashing) similar to siyah? As I would have thought Odin is a last resort due to that pesky yellow triangle
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yea get it to cwmr and click backup.
And yea the cm9 recovery is similar to siyah.
And you can try triangle away from xda to get rid of the triangle. I like it though
Sent from my GT-I9100 using xda premium
Yea I bought triangle away off play store the other day to support chainfire and have used it once successfully - don't want to make a habit of it for obvious reasons hehe
Sent from my GT-I9100 using XDA
Hi,
For the past while i was getting the SOD only using Siyah based kernels and Phenomenal was working fine for me, but after updating to version 6.1 my phone has started to switch off again. Is this a problem with hardware and do i need to send the phone away for repair or can it be fixed by myself some other way?
I have went back to Phenomenal 5,5 kernel and am waiting to see if i still get the problem.
Cheers.
jpopgt said:
Hi,
For the past while i was getting the SOD only using Siyah based kernels and Phenomenal was working fine for me, but after updating to version 6.1 my phone has started to switch off again. Is this a problem with hardware and do i need to send the phone away for repair or can it be fixed by myself some other way?
I have went back to Phenomenal 5,5 kernel and am waiting to see if i still get the problem.
Cheers.
Click to expand...
Click to collapse
What rom are you on? Can you refer to the thread in my sig for the info you need to include to get results.
Sent from my Nexus 7 using xda premium
kilometers4 said:
What rom are you on? Can you refer to the thread in my sig for the info you need to include to get results.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Hello,
I have tried just about all the latest ICS and JB roms......
The make of your phone. There are many different variants of your device. I9100 G/M/P/T
Are you rooted/unrooted?
What rom you are using? -and- What kernel are you using?
Have you flashed any mods/scripts/themes?
Have you changed DPI? If yes, to what?
I have a UK T-Mobile Samsung Galaxy S II I9100XXLQ6
I am rooted
I was Dual Booting with SuperNexus JB Build 2 and Portal Rom 2.4 using the latest siyah kernel and i got the SOD using SuperNexus, i then removed The second rom and used the ultimate kernel cleaning script to remove Siyah and installed Phenomenal 6.1 with Portal Rom and i got the SOD a day later.
I am not using any mods or extra scripts
I have not changed the dpi
I noticed this problem when i first tried a dual boot a few months ago but has been stable until now only with Phenomenal 5.5. i have tried the other siyah based kernels and i still got the SOD.
Yesterday i flashed the Phenomenal 5.5 along with Portal rom and it's been fine so far but i can get 2-4 days before it happens then it happens a few times daily after the first SOD.
EDIT: Thats it switched off again. Think i will need to send it in for repair?
Hi.
I like the siyah kernel. However if I try to update my ROM from 3.1.2 to 3.1.3 and choose custom... it gives me 2 kernels to choose from... not syrah.
How do I keep my kernel???
eggface5 said:
Hi.
I like the siyah kernel. However if I try to update my ROM from 3.1.2 to 3.1.3 and choose custom... it gives me 2 kernels to choose from... not syrah.
How do I keep my kernel???
Click to expand...
Click to collapse
Simple.
After installing rom just go back into recovery and flash Siyah.
I think you shouldn't flash siyah kernel its not working good with 4.2.1 ROMs better flash largest version of dorinmax kernel it's a moded version of siyah and better that's why it isn't included and I think you try rootbox rom RR 3.1.3 is buggy there are official version of rootbox and nightlies
Sent from my GT-I9100 using xda premium
Angelkom said:
I think you shouldn't flash siyah kernel its not working good with 4.2.1 ROMs better flash largest version of dorinmax kernel it's a moded version of siyah and better that's why it isn't included and I think you try rootbox rom RR 3.1.3 is buggy there are official version of rootbox and nightlies
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
There is a vsync patched version of Siyah that apparently works fine with 4.2.1, however there is limitations on features of kernel.
Has anyone tried the CM 10.2 nightlies yet? I'm running 10.1 with AJK 4.3 and I'm leary about trying 10.2 until AJK is compatible, mostly because I like the audio boost from using STweaks. Just wanted to see what other's experience has been. Thanks!
MrWharfsnort said:
Has anyone tried the CM 10.2 nightlies yet? I'm running 10.1 with AJK 4.3 and I'm leary about trying 10.2 until AJK is compatible, mostly because I like the audio boost from using STweaks. Just wanted to see what other's experience has been. Thanks!
Click to expand...
Click to collapse
Yeah I just installed in a min ago. Seemed to work fine but then I went back into recovery and tried installing STI kernel and now I'm stuck at boot.
...lame. I cant post in the development forum so I guess I'll just be waiting.... CM 10.2 worked fine, its just the custom kernel. I tried every way I know. I used jivys kernel cleaning script and wiped everything. still no luck.
ryanhe30 said:
Yeah I just installed in a min ago. Seemed to work fine but then I went back into recovery and tried installing STI kernel and now I'm stuck at boot.
...lame. I cant post in the development forum so I guess I'll just be waiting.... CM 10.2 worked fine, its just the custom kernel. I tried every way I know. I used jivys kernel cleaning script and wiped everything. still no luck.
Click to expand...
Click to collapse
Is STI kernel a 4.3 or 4.2.2 kernel?
Sent from my Nexus 7 using xda app-developers app
SWOLEGASM said:
Is STI kernel a 4.3 or 4.2.2 kernel?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
That's what I wanted to find out. I know it works with 4.2.2 but I'm assuming not with 4.3? But I was trying to install STI 2.34... I think the latest is 2.39 so maybe the newer version might work? or am I still wrong??
I flashed the 10.2 nightly from the most recent 10.1 nightly. Works great. Wiped cache + dalvik. Also flashed the 4.3 gapps.
You may want to wait a few days for any initial bugs to be squashed.
Infected's i9100 CM10.2
I too tried the CM10.2 official nightly by wiping cache+dalvik from Infected's i9100 CM10.1 Linaro builds. I then installed AJK not knowing it didn't support 4.3 yet and so was stuck at boot logo.
I don't care so much about the custom kernel. How else can I run a ROM from the i9100 thread but use the i777 CM10.2 kernel? If anybody can just step me through the libs and keylayout changing process that'd be awesome!
mpkothari said:
I too tried the CM10.2 official nightly by wiping cache+dalvik from Infected's i9100 CM10.1 Linaro builds. I then installed AJK not knowing it didn't support 4.3 yet and so was stuck at boot logo.
I don't care so much about the custom kernel. How else can I run a ROM from the i9100 thread but use the i777 CM10.2 kernel? If anybody can just step me through the libs and keylayout changing process that'd be awesome!
Click to expand...
Click to collapse
PM me a link to the ROM you are talking about and I may see if it works with my alpha AJK with CM10.2 support.