Using SE LwW WT19i. I'm using X Kernel by krizky82.
Flashed the FXP116 CM9 in CWM, and then rebooted the phone but wont boot up..
Do I have to flash a certain kernel that's compatible with the rom?
use the kernel inside the flashable zip file.
but for me the new kernel in the new FXP116 doesnt work, got stuck on booting. i'm using the old kernel from FXP115 and its still works fine with FXP116
yep you have to flash the kernel included in the zip file of the rom. cheers
an0nym0us_ said:
use the kernel inside the flashable zip file.
but for me the new kernel in the new FXP116 doesnt work, got stuck on booting. i'm using the old kernel from FXP115 and its still works fine with FXP116
Click to expand...
Click to collapse
oh great thanks! that's why it wont boot.. because I did extracted the boot.img and flashed in fastboot, I'll go get it from FXP115 then
CM9 stuck on boot screen after flashing dual speaker fix...
Okay so I got the CM9 to work, tried running first the FXP115 before flashing the FXP116 just to make a comparison.
Second after playing around with the FXP115, I now went inside CWM to flash the the dual speaker fix . Then rebooted the phone, now its getting stuck on the Cyanogen(Mod)9 boot animation screen...
Did the same thing for FXP116 and it never gets passed the CM9 boot animation screen... Dunno whats going on after applying the speaker fix
skramz said:
Okay so I got the CM9 to work, tried running first the FXP115 before flashing the FXP116 just to make a comparison.
Second after playing around with the FXP115, I now went inside CWM to flash the the dual speaker fix . Then rebooted the phone, now its getting stuck on the Cyanogen(Mod)9 boot animation screen...
Did the same thing for FXP116 and it never gets passed the CM9 boot animation screen... Dunno whats going on after applying the speaker fix
Click to expand...
Click to collapse
copy the contents of the fix to the original folders of the rom and then flash it, flashing it afterwards gives bootloops
where can i found fxp115 kernel for wt19i? i tried boot.img on fxp111 and 117 but it's not working..
AndroBeats93 said:
where can i found fxp115 kernel for wt19i? i tried boot.img on fxp111 and 117 but it's not working..
Click to expand...
Click to collapse
i'l upload it, just a sec
edit:
this is from the original fxp115 cm9 zip
http://dl.dropbox.com/u/63607856/boot.img
thanks for the help.. i'll test it
Related
hellow dev...
please help me..
asking someting...
how can i install this rom? Atrix 4g ICS Codename..
you can see this http://cna.exynos.co/olympus/
it have update till 28.03.2012...
so when i install it...it come back to recovery...
im love ICS..
tq..please help me...
you have to choose one version, download and copy to your device
1. run recovery
2. wipe data, cache, dalvik
3. install zip from your device
4. reboot
i do step by step...still reboot recovery...
have u try it?
Did you install CWM? My buddy had the same problem with rebooting into recovery.
Sent from my MB860 using XDA
I tried flashing it and it does indeed just reboot to recovery. Have no idea why.
What it actually does is sits at boot logo screen, then reboots to recovery, so it actually bootloops once into recovery each time you try to boot it up.
CaelanT said:
I tried flashing it and it does indeed just reboot to recovery. Have no idea why.
What it actually does is sits at boot logo screen, then reboots to recovery, so it actually bootloops once into recovery each time you try to boot it up.
Click to expand...
Click to collapse
need the bins files and libcxxx from cm9 to stop reboot to recovery
stevendeb25 said:
need the bins files and libcxxx from cm9 to stop reboot to recovery
Click to expand...
Click to collapse
Cheers. I just tried flashing it to see if I got same issue as OP. Hopefully your comment will help him/her.
Sent from my MB860 using xda premium
need the bins files and libcxxx from cm9 ???
can i just take from cm9 source??
I got it booting using cm9 as base.
All you gotta do is delete app/framework from cm9 then push all app/framework of codename to see at least what the ui looks like and what options and features it has
Sent from my MB860 using XDA Premium App
rickriego replaced the bin/libs in the CNA zip with the ones from cm9 and posted a flashable zip over in the dev section for anyone interested.
I know there is a version using Jokersax's files but has anyone gotten it to work with Turl's files. The camera does not work with the newest jokersax as Rodriego uses, so I tried to use Turl's, and it just got stuck on the bootscreen. Thanks in advance.
fl1p1slander said:
I know there is a version using Jokersax's files but has anyone gotten it to work with Turl's files. The camera does not work with the newest jokersax as Rodriego uses, so I tried to use Turl's, and it just got stuck on the bootscreen. Thanks in advance.
Click to expand...
Click to collapse
same way, merge turls bin/lib folders into the zip using 7zip
stevendeb25 said:
same way, merge turls bin/lib folders into the zip using 7zip
Click to expand...
Click to collapse
Yeah I thought it would be pretty easy. I used winrar to move the folders to the cna rom zip but still stays on boot animation.
Thought I was going crazy bit other people could not make it work with turls1's files
ovitz said:
you have to choose one version, download and copy to your device
1. run recovery
2. wipe data, cache, dalvik
3. install zip from your device
4. reboot
Click to expand...
Click to collapse
No, the above WILL NOT WORK!!!
However, doing this will work:
get the nightly from
http://cna.exynos.co/olympus/
get the
beta 0.4.3
faux’s 1.0 kernel -outdated (ignore outdated, it´s the right one)
from
http://www.jokersax.com/developer-pages/jokersax/cyanogenmod-9-atrix/
get jokersax gapps v11
from
http://www.jokersax.com/developer-pages/jokersax/cm9-gapps/
in linux, using Q7Z, unzip the CNA nightly and replace the following folders by the ones from Joker´s beta 0.4.3:
bin
lib
xbin
Re-Zip. Be careful not to alter the zip structure or permissions.
In Recovery, flash your modded CNA.zip, THEN flash faux´s kernel, THEN flash gapps.
Enjoy
help me please...
i am trying to flash kamarush's rc3 kernel with flashtool in fastboot mode,it say ok but my phone won't boot into system,any sugestion dude?
pucank said:
help me please...
i am trying to flash kamarush's rc3 kernel with flashtool in fastboot mode,it say ok but my phone won't boot into system,any sugestion dude?
Click to expand...
Click to collapse
You need to install kernel and ROM both, this kernel is not compatible with stock ROM. Go to Recovery to install ROM.
can you give me the step by step explanation my friend?
because i ussualy flash the kernel first,
should i flash the rom first via cwm?
just flash the kernel, put the kamarush rom on your micro sd card, boot to cwm on the new kernel, wipe everything out, install zip and reboot to system that should do it.
If you Flashed Kamrush's kernel first then you'll have to flash his ROM. His ROM only works for 4.0.4. If you haven't put his ROM on your SD Card, ull need to put it on and flash it through CWM. But if you dont want ICS just flash someone else kernel and your phone should work again. Your choices are:
X kernel
Rage Kernel
Boof Kernel
Those work with 2.3.4
thanks but my problem is when i finished flash the kernel my phone do not booting into system after i flash the kernel,so i cant flash the rom via cwm
ok just press volume down several times on the sony logo until it takes you to cwm that is the way you enter to cwm in custom kernels
the sony logo did not appeare after flash the kernel...i try other kernel and works,but this kernel (rc3) did not works in my pnone
did you downloaded the right kernel?? this rom and kernel supports 4 devices.
ginryu said:
did you downloaded the right kernel?? this rom and kernel supports 4 devices.
Click to expand...
Click to collapse
yes i have download "boot_mango_rc3_final" for my sk17i
i dont have this problem in rc2
any idea my friend?
pucank said:
yes i have download "boot_mango_rc3_final" for my sk17i
i dont have this problem in rc2
any idea my friend?
Click to expand...
Click to collapse
download the kernel again and check the progress when you flash the kernel..
akshay13071990 said:
download the kernel again and check the progress when you flash the kernel..
Click to expand...
Click to collapse
flashing...
flash operation complete..
OKAY(1.300)
but the divice dont want boot into system,the sony logo did not apeare
Rename the file to boot.img (remove the mango_rc3_final) and then flash the kernel and then try turning it on again
BudgyN1 said:
Rename the file to boot.img (remove the mango_rc3_final) and then flash the kernel and then try turning it on again
Click to expand...
Click to collapse
still not work my friend....i try to flash other kernel and works,but failed in this rc3 kernel
pucank said:
still not work my friend....i try to flash other kernel and works,but failed in this rc3 kernel
Click to expand...
Click to collapse
what is the flashtool log telling you??
here is the log.....can you help me?thanks
pucank said:
here is the log.....can you help me?thanks
Click to expand...
Click to collapse
Kernel is properly installed. You need to install the ROM via Recovery. Make sure the ROM .zip file is on the SDcard.
When screen gets brighter during starting, click Volume DOWN button many times until you enter the recovery. Then install zip from sdcard and choose it.
Try flashing the kernel manually using the terminal commands or update Flashtool (that might be your problem)
I tried to install CyanoGen ICS rom via the CWM, but maybe the Kernel didn't installed properly or something, and after the Aroma installer, the phone turned on, stayed a bit at the Sony Ericsson logo, and after that black screen and absolutelly nothing happened.....
Is it bricked and can I do something?
sartheris said:
I tried to install CyanoGen ICS rom via the CWM, but maybe the Kernel didn't installed properly or something, and after the Aroma installer, the phone turned on, stayed a bit at the Sony Ericsson logo, and after that black screen and absolutelly nothing happened.....
Is it bricked and can I do something?
Click to expand...
Click to collapse
Flash to stock firmware using flash tool.
hmnk said:
Flash to stock firmware using flash tool.
Click to expand...
Click to collapse
where do I find the stock rom .ftf files? Everywhere the links are either not working or downloading with 10kb/s........
sartheris said:
I tried to install CyanoGen ICS rom via the CWM, but maybe the Kernel didn't installed properly or something, and after the Aroma installer, the phone turned on, stayed a bit at the Sony Ericsson logo, and after that black screen and absolutelly nothing happened.....
Is it bricked and can I do something?
Click to expand...
Click to collapse
hmmm...did you flash the kernel first before you flash the ROM??? or do you unlock your bootloader first before you attempt to flash any kernel on your phone????
Pusak Gaoq said:
hmmm...did you flash the kernel first before you flash the ROM??? or do you unlock your bootloader first before you attempt to flash any kernel on your phone????
Click to expand...
Click to collapse
First I unlocked the bootloader, then rooted it, then installed CyanoGen ICS via the Aroma installer in CWM, I think I forgot to flash any kernel...
So when the installation was finished, it restarted, went to the Sony Ericsson logo and after that nothing, black screen
sartheris said:
First I unlocked the bootloader, then rooted it, then installed CyanoGen ICS via the Aroma installer in CWM, I think I forgot to flash any kernel...
So when the installation was finished, it restarted, went to the Sony Ericsson logo and after that nothing, black screen
Click to expand...
Click to collapse
Then flash a CM compatible Kernel and then re-install the CM ROM..
CM ROMs won't work with Stock Kernel..
And since you said yo used Aroma to install the CM9 ROM, I presume it must be KRsH CM9 ROM.. If so, use the KRsH Kernel for that.
I flashed it and now it's fine
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks
Hi,
I have the reboot loop after flashing any of the .570 rom. I have tried the flashable zip from one thread and have also tried a couple of FTFs with APP Log and UserData wipe selected.
Does anyone know why this isn't working on my phone? I have a regular 4G Z2 with a locked BL.
Thanks,
linkazoid said:
Hi,
I have the reboot loop after flashing any of the .570 rom. I have tried the flashable zip from one thread and have also tried a couple of FTFs with APP Log and UserData wipe selected.
Does anyone know why this isn't working on my phone? I have a regular 4G Z2 with a locked BL.
Thanks,
Click to expand...
Click to collapse
Yes I also face this bootloop with "Marshmallow_Stock_570_ROM_Ultraslim (Full deodxed)" so try to install bootloop fix from other thread OP topic 5.5 http://forum.xda-developers.com/xperia-z2/development/rom-official-6-0-1-23-5-0-486-beta-t3336770 it work
Doesn't this put the old kernel back though?
linkazoid said:
Doesn't this put the old kernel back though?
Click to expand...
Click to collapse
I don't know BUT today he make the new one with the latest version 570 with this fix bootloop I can try and enjoy MM rom .
I saw this, I have now flashed the ultraslim rom and the .570 fix instead.
What is the bootloop like? I have bootloop after flash the 570 made from a tft. It shows the SONY logo and then black screen for seconds then auto reboot. I'll try that bootloop fix zip tomorrow. Hope that will work.
My bootloop consisted of the ROM booting but as soon as you touched the screen to check a box or unlock the screen it would restart. The fix by niaboc works as I've applied it on the ultraslim ROM, now using the latest kernel and latest ROM!
To fix the bootloop, have to flash via recovery.
Then how I enter the recovery while this handheld keep restart at welcome screen.thanks for ur respons
Touch the screen and hold volume down! If you've installed a ROM without recovery then you'll have to reflash a ftf and start again