So after unlocking the boot loader today and loading up the stock rooted OTA rom my phone started randomly boot looping. It was sitting on my desk then randomly rebooted and now its been doing the same thing despite my best tries to fix it.
I had Amon Ra recovery installed initially, then flashed CWM via Rom manager. At this point I can't boot into recovery (or factory reset). It all happens very quickly, but it looks like the recovery menu loads up then the phone reboots. I am able to get into fastboot and reflash any of the recovery img's. I've tried the Amon Ra newest, the CWM normal and touch recovery and none of them will let me in. I've tried to get into recover with the 4G sim out and with the SD card out.
The phone does boot into an OS but after about 10 seconds it reboots. I did some digging and thought it might be the older bootloop issue with the network type. It does it with the sim out and in airplane mode so I'm not all that confident that its that issue.
At this point I am looking at tried to re-stock via Hboot RUU's. I have the P98IMG-1.02.605.6.zip on an SD card and that does flash but at the end of the verification it tells me "the main version is older." So I'm either looking for another package that will let me re-stock and give it a try again... or open to any other suggestions?
Hoping the phone isn't totally hosed, though based on what I can still get into I think there may be hope yet.
Anyone?
thanks in advance!
Have you tried CleanFlash? Also you are getting the mainver because you updated with the OTA. Google ruu_vigor. You are looking for the one that starts with 2.01.
Sent from my VTAB1008 using xda premium
This may help...
Get the 2.____.11 RUU from the 'Vigor Shipped' post in development. Follow the directions in the word file in post 2 from here:
http://forum.xda-developers.com/showthread.php?t=1487981
And then flash that RUU in HBOOT.
I had 99 problems with the RUU exe and spent the last week trying to get it to take. That tip to extract the PH file finally got me there. It fixed all kinds of issues for me and got me to stock.
Don't forget to relock.
(I think if you ran the ICS leak RUU you may still have issues, but you could follow those steps with that RUU as well probably and it would hopefully get you cleaned up)
Thanks for the help so far.
I got the newer RUU and got it flashed via hboot after i relocked. *edit* after the second time flashing it it seems to be working.
You guys rock.
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the PH98IMG methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
---- EDIT WITH SOLUTION ----
Here's my "solution" to this issue. I'm sure it's located somewhere in these forums, but I couldn't find it so I imagine others can't either. Essentially, you're going to have to S-Off. Here's the solution:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
autotuneuser said:
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the P87etc methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
Click to expand...
Click to collapse
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Magestic12 said:
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Click to expand...
Click to collapse
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
People say a lot of things are impossible, most have the virtue of never being tried.
This is the one I used to fix mine when I screwed up the partitions on my phone. I will warn you, the link in the thread takes you to another site & you have to sign up to download it. Its completely free & legit, but it won't let you download unless you register which is STUPID!
http://forum.xda-developers.com/showthread.php?p=25664508
Let me know if that helps
Oh & BTW I was & still am on the ICS leaks when I did this, so you'll be fine. You will lose everything on your phone though, because it wipes everything. But if you can't use it, that's not really an issue I guess.
tekhna said:
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
Click to expand...
Click to collapse
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
autotuneuser said:
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
Click to expand...
Click to collapse
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Magestic12 said:
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Click to expand...
Click to collapse
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
autotuneuser said:
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
Click to expand...
Click to collapse
And as far as this goes yeah you can't use the .exe if your on ICS firmware with s-on and there are no available .exe's for ICS
Sent from my ADR6425LVW using Tapatalk 2
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: http://android.thesmallprint.org/ICS.LEAK.3.14.605.5_PH98IMG.zip. Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
what he said
mikey's comments just previous are totally right, but after install, i would recommend
a factory reset, maybe even twice.
your bootloop problem should be cured then...
I was on the latest ICS firmware running an ICS ROM when I had to run the RUU I gave the link for & it worked fine for me.
Here's my suggestion & you can take it for what its worth.
I would download the latest HBoot & Radios & flash them.
Then if you can get into recovery, wipe everything, manually wipe the system, boot, etc. Then after that try running the RUU.
I just did this earlier in the week & it worked fine & my phone was all screwed up because the partitions were mounting to the wrong places & just all messed up.
I am by no means a dev or an expert, I'm just telling you what I did.
WHATEVER YOU CHOSE, YOU DO AT YOUR OWN RISK, but I don't see where you really have a choice.
Let me know if I can be of anymore help as I know what its like to have a phone that's freaking out on you. You can PM me or post here which ever you prefer. If after that we still can't get it fixed, we'll go find a dev to help us.
mikeyk101 said:
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: . Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
Click to expand...
Click to collapse
Well now my recovery is saying it can't mount various things like "E: can't mount b dev/block/ blah blah"
And I tried flashing my ROM through Amon recovery but it's saying it can't open the file because it's (bad). I formatted the SD card and I'm still getting the issue. Any ideas?
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
mikeyk101 said:
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
Click to expand...
Click to collapse
I did install in hboot. I then installed Amon so I could flash the ROM and that's what's giving me all those errors.
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the SD Card, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
mikeyk101 said:
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the Internal_sd, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
Click to expand...
Click to collapse
It's the actual recover I believe to be giving me the errors, but I'll try what you said in about 2 days (I need to study for finals). It might be because I tried to S-Off and I installed all of that guys software and it might be making the phone act funny. I'll be much more descriptive about my errors when I post back in 2 days.
I fixed it!!
Ok, so I finally got it working, I'll try to detail my steps for anyone else who ran into similar issues:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
Hi everyone, so this is my first post here so please deal with me. I did check for similar problems with no results and think I'm posting in the right area. So try not to get too frustrated with me if I'm wrong. Anyway, with all of that out of the way on to my problem.
I have a rooted rezound, which was first rooted to get rid of bloatware and such, but I decided I wanted to try out some different roms. My problem is every time I flash a rom, which appears successful, but whenever it boots up it'll freeze up on the HTC screen. To fix this I've been just been pulling the battery and restoring to the backup I made before trying to flash roms. I would really like to try some different roms but I've gotten stuck on that screen with each one I've tried. If anyone could help me I'd greatly appreciate it!
Some additional info: I use to have a rooted thunderbolt and have some experience with flashing roms and all that stuff, but I'd still consider myself a noob. I have Amon Ra Recovery on my rezound and the screen in hboot reads:
***Unlocked***
vigor put ship s-on rl
HBOOT-2.11.0000
eMMC-boot
Oct 6 2011, 15:43:22
(I'm not sure why it says the incorrect date and time?)
I've tried several different things to successfully flash roms. I've tried flashing them with and without PH98IMG.zip on the root of my sd. I've tired it with and without the back on my phone. When flashing roms I ALWAYS wiped all data before flashing. That's just about everything relevant I can think of, sorry for the length! I figured the more information the easier for you guys to help!
If you're S-ON, you need to flash the P98IMG zip with the ROM. This contains the boot.img file.
Just extract the ROM of choice, take the P98IMG zip, throw it on your SD card and boot into your bootloader. Go into the bootloader menu and it'll install. Reboot, phone will work just fine.
If there isn't a P98IMG file and just a boot.img file, just push it through ADB while in your fastboot.
command is fastboot flash boot boot.img
So the P98IMG.zip file I downloaded and had on the root of my sd card is different than the one I need to extract from the rom or was I just not installing it right?
I did have a P98IMG.zip on the root of my sd card and I went into hboot, then I went to recovery and flashed my rom. Is there another step I need to take in installing the P98IMG.zip or should it automatically install? Do I need to reboot it between installing the P98IMG.zip and the rom?
Thanks for you help and quick response! I'm really trying to learn and get better at this stuff
After you flash your ROM, go into your bootloader (fully, must be in the bootloader menu) and it'll install. Follow the onscreen instructions, reboot, and remove the zip from your SD card.
Hope that helps.
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
ewy87 said:
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
Click to expand...
Click to collapse
How are you getting to recovery? It should give you an option to install update or reboot in hboot. If the ph98img is in the right spot you shouldn't be able to boot into recovery
With my phone powered off I'm holding down the power button and down volume button to get to hboot. I have my ROM and the PH98IMG.zip file both on the root of my SD card. It does very quickly appear to load the PH98IMG file but returns to the hboot screen the has the options: fastboot, recovery, factory reset, clear storage, sim lock, image crc.
Could it be that the PH98IMG file should be somewhere else? And was I doing everything in the correct order or do I install the PH98IMG first?
File may be bad. Do you have adb set up?
Sent from my ADR6425LVW using Tapatalk 2
Well actually I'm running off a mac and I've been using my sisters laptop for adb and that stuff but she just broke it...just my luck haha. Would I be able to download a different copy of PH98IMG from online and try that?
What ph file are you trying to flash? It should load it and ask if you want to update. Try downloading it again. May be a bad download
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
ewy87 said:
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
Click to expand...
Click to collapse
So s-off. Seriously though. You flashed a random ph file and thought it would work? It has to be the right one for the rom. Besides that rom isn't maintained anymore
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
ewy87 said:
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
Click to expand...
Click to collapse
I would recommend getting s-off. It's going to be the only method for this phone. I mean why waste another exploit to be patched? I would recommend con rom since it uses aroma to detect whether your s-on or s-off
Did you s-off your rezound? How were your experiences with it? I'm just worried about bricking my phone. But thanks for the ROM recommendation! I've been trying to find a good ROM
S-off was fairly easy, but you do need Windows or a Linux build.
S'up folks!!
I rooted my Evo using the wire trick (was stressful but kinda fun)
Been trying to flash some Roms, CM10.1, for a while but getting bootloops and read I needed hboot 1.49.0007. I was on 1.53.something
I used the 'Free 3vo_v2' method and after a fre tries it worked although I never saw a progress bar, it just hung but after a battery pull I booted into bootloader and it was done! It relocked my bootloader at the same time.
So I was good to go. I installed CM10.1 but soon after reverted back to my daily driver, Viper3D
Since then the phone has been randomly restarting. It can restart every few minutes or last almost full day. One second its on, the next second I get the HTC logo, then the Viper3D logo and im back...... but for how long till it reboots again??
Anyone else had that happen??
Someone seemed to think its maybe a bad sector on my SD card??
Also I did notice that when doing a Nandroid I got 2 entries I've never got before:
No sd-ext found. Skipping backup of sd-ext.
No sd-ext2 found. Skipping backup of sd-ex2t.
firstly, you shouldn't have used that method to downgrade. use this method to downgrade and check whether your radio version is the latest. do a fresh install of Viper3D after that
I tried that many different ways to downgrade but using the Free 3vo was the only one I had any sort of success with.
That link u posted is one way I did not spot before so I'll give it a go but I just downloaded the file to my sd card the dropped into recovery and tried to flash it but it just aborted after about a second.
Maybe I need to do it via fastboot or as in 1.49 already I should upgrade again to then downgrade???
#1, Download zip (IN POST 2)
#1, Simply place the pg86img.zip on root of sd,
#3, Boot into bootloader and run the update
#4, Follow onscreen instructions
it will flash the bootloader, reboot, then flash splash img , then reboot
and your now in hboot 1.49.0007
Click to expand...
Click to collapse
i dont think you need to do it if your hboot is definitely 1.49.0007
check your radio version in bootloader and tell me that. and try to do a fresh install of viper3d and see if reboots persist
radio-11.25.3504.06_m
see attached pics.....
thanks for taking the time to help out!
edit: im gona backup my stuff and do a full format of everything and reinstall as soon as I get home.
I already did one a few days ago but did not format my sd card and I still got restarts
If it still persists ill try upgrading and then downgrading again with ur linked method.
Your hboot is fine. i have the same radio as yours and i dont get reboot problems. but recently people have been reporting these random reboot problems with cm and other aosp based roms and the fix for that seems to be to flash radio/baseband 11.77.3504.00P_11.25.3504.06_M
you can get it here. you have to flash it in bootloader. its worth a try
Thx, ill give it a go as soon as iv backed it up.
Can I backup my original radio/baseband??
Might be a dumb question... but when u say flash from bootloader is that the same as installing from a zip via recovery? in my case 4ext recovery.
i dont know if its possible to do that but this radio shouldn't have any adverse affects.
no its not the same as flashing in recovery. place the file on the root of your sdcard. then you need to boot into bootloader ("adb reboot bootloader" in cmd or hold power + vol down while powering on) . it should automatically detect the PG86IMG file and ask you if you want to proceed. select yes and then reboot when it completes
Yeah figured that out just before ur reply ;p
Only thing is, it finds the zip and asks to update so I say yes, it does its thing, I then hit power button to reboot, go through the startup steps as it resets the rom but once finished and back into bootloader im still on the same radio??? (RADIO-11.25.3504.06_M)
only your baseband will be changed. you need that P version. test it out now and see if the problem persists
baseband is still the same as it was as it seems to update but then rebooting back to bootloader show it as the same.
well I did a full format of everything including the sd card and a reinstall of Viper3D and so far no restarts but ill see how it goes for a day or so
last night all of a sudden my evo just powered off and when i try to reboot , it wont reboot from power button, I can only get it to reboot from bootloader, and the after a few minutes it will shut down again. ive managed to keep it on long enough to try installing a nand. ..no luck still does same thing when the boot loader is loading it scrolls down and says no image installed / wrong image .. so i installed twrp again hoping that would work .. i tried wiping cash /dalvic ... and also factory reset and flashing rom again .. it happens on any rom so its not the rom anyone, have any ideas? .. im lazy panda s-off on cm 10.2
Make sure your recovery is up to date. If you don't have a ROM on your phone to flash, boot into recovery and mount storage and install a ROM from your PC. Do a full system wipe from recovery (not just a factory reset), then flash a ROM like normal. Also, the "error" in the bootloader where it says "Wrong image or no image" is normal-the bootloader is looking for a PJ75IMG.zip on your external SD card, so unless you have one, you'll get that message.
If all else fails, I would run ViperRUU. It will take your phone back completely stock, unrooted & S-on. You can then HTC Dev unlock and run Moonshine to get S-off again. You can run ViperRUU from the bootloader. Just follow the instructions in the OP. The link to VipeRUU is below.
http://forum.xda-developers.com/showthread.php?t=2197909
Sent from my EVO using XDA Premium 4 mobile app
cool ill try that..figured it was some sort of bootloader issue.. appreciate the help!.. thaNKS