Generic ROM .42, .62, .69 (not rooted!) for Xperia Active:
http://www.mediafire.com/?lgormqyi439cp
Just download it, unzip and flash via Flashtool.
____________________
Baseband .66 for:
Xperia Active
http://www.mediafire.com/?pkokm0mlrg0vor9
Mini Pro
http://www.mediafire.com/?jbkvw3ruoyqa0gc
Just download it and flash via Flashtool.
what is it for ?
BB manages the interaction between the telephone part of the smartphone and operating system.
Whenever the smartphone connect to mobile networks for voice or data, it runs through the BB. Also, BB is responsible for the functioning of the SIM-card and for receiving the signal.
BB .66 extracted from .69 firmwaare.
is it safe to flash BB .66 to .62 firmware?
Yes, it is safe, if you did it right.
Now I am using it on .62 firmware whole the day, and have no problems.
Could you find some links for SK17i if it's possible?
works on xperia mini st15i
thanks
abd-hamdan said:
works on xperia mini st15i
thanks
Click to expand...
Click to collapse
OK. Tell me if something goes wrong. It is not for ST15i, but maybe compatible.
Black_jackss said:
Could you find some links for SK17i if it's possible?
Click to expand...
Click to collapse
Is it so hard to find for SK17i?
OK, when i will have a time.
I need a volunteer to check the baseband .66 for SK17i.
himasura said:
I need a volunteer to check the baseband .66 for SK17i.
Click to expand...
Click to collapse
Here i am ^_^ Flashing .66 baseband now, look how it works. If someone goes wrong i will write here immediately
himasura said:
I need a volunteer to check the baseband .66 for SK17i.
Click to expand...
Click to collapse
Personally I am using baseband ...-70
http://forum.xda-developers.com/showpost.php?p=24983770&postcount=2
himasura said:
I need a volunteer to check the baseband .66 for SK17i.
Click to expand...
Click to collapse
It works in my SK17i. Thanks
hnl_dk said:
Personally I am using baseband ...-70
http://forum.xda-developers.com/showpost.php?p=24983770&postcount=2
Click to expand...
Click to collapse
It is not working properly on my Active with GB. Is it working right on Mini Pro?
himasura said:
It is not working properly on my Active with GB. Is it working right on Mini Pro?
Click to expand...
Click to collapse
Baseband -70 works fine in my mini pro. But I notice higher battery drain using it in combination with fxp cm7 and rage kernel v2.8.
himasura said:
It is not working properly on my Active with GB. Is it working right on Mini Pro?
Click to expand...
Click to collapse
It is working fine on my mini pro with CM9 FXP117.
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
greenAlgae said:
Baseband -70 works fine in my mini pro. But I notice higher battery drain using it in combination with fxp cm7 and rage kernel v2.8.
Click to expand...
Click to collapse
I guess that it should only be used on with ICS/CM9... just a guess.
hnl_dk said:
It is working fine on my mini pro with CM9 FXP117.
I guess that it should only be used on with ICS/CM9... just a guess.
Click to expand...
Click to collapse
Maybe you're right. Anyway, using it with rage 2.7 in cm7 didn't seem to affect battery life. Maybe the new cpufreq driver in 2.8 somehow cause higher power consumption when used with -70 baseband. But this too is just a guess
Sent from my SK17i using XDA
For some reason I can't flash the .70 on my ST17i. I tried everything but it keeps getting error when trying to flash. Sony....
is there anyone who has BB .69??
zummer22 said:
For some reason I can't flash the .70 on my ST17i. I tried everything but it keeps getting error when trying to flash. Sony....
Click to expand...
Click to collapse
You have unlocked the bootloader?
Related
Hi guys,
Yesterday I've update my phone to 4.0.2.A.0.42 on PC Companion.
I've made a ftf file via downloaded blob_fs contents + LT15 loader.
It's official 4.0.2.A.0.42 ROM (Android 2.3.4).
It's working, no errors reported.
Download link: http://www.multiupload.com/ZHYL4RSZGW
svrl said:
Hi guys,
Yesterday I've update my phone on PC Companion.
I've made a ftf file via blob_fs contents + LT15 loader.
I'm not tried yet.
Download link: http://www.multiupload.com/ZHYL4RSZGW
Click to expand...
Click to collapse
i'm not sure if it is ok with the lt15i loader, it should be the mt15i loader
Can't found mt15i loader. Users says it's compatible for mt15i. Probably it's compatible to Neo.
If any user tried it, please post a reply here
working on my neo thx for share
Sent from my MT15i using Tapatalk
skupi20 said:
working on my neo thx for share
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Oh, finally!
50+ users downloaded it but no one send a report.
Thanks for the report
any differents from 4.0.1 ? compatible with doomkernel?
Gluove said:
any differents from 4.0.1 ? compatible with doomkernel?
Click to expand...
Click to collapse
I see;
3D Photo Taking
3D Album
Zoom on video recording
Some Wi-Fi fixes (for me)
Some mobile data issue fixes (for me)
Some SE apps
And yes, I'm using it with doomkernel.
Works for me, was at .283 first.
work for me 1+
svrl said:
Oh, finally!
50+ users downloaded it but no one send a report.
Thanks for the report
Click to expand...
Click to collapse
I download it already in i try.. it works on my neo... thanks!!!
Can someone tell me if this firmware fixes the issue where the phone can't connect to Wi-Fi channels 12 and 13? Thanks
WildMoves said:
Can someone tell me if this firmware fixes the issue where the phone can't connect to Wi-Fi channels 12 and 13? Thanks
Click to expand...
Click to collapse
I've signal problems in home, because so many radio devices located in room.
Today I've tried 13th channel solution for better signal quality. When I select 13th or 12th channel, my neo not show my network in list Sorry..
can i use stock rom after i root my phone? can anyone help me. . .please. . .
It's working all right, thanks.
kuzenka said:
can i use stock rom after i root my phone? can anyone help me. . .please. . .
Click to expand...
Click to collapse
Yes, just flash via Flashtool
WildMoves said:
Can someone tell me if this firmware fixes the issue where the phone can't connect to Wi-Fi channels 12 and 13? Thanks
Click to expand...
Click to collapse
Did you flash a rom meant for the NA region? There channels 12 and 13 aren't allowed, so this wouldn't be an issue but working by design.
My german Neo with the stock 4.0.2.A.0.42 rom has no problems connecting to channels 12 and 13.
svrl said:
I've signal problems in home, because so many radio devices located in room.
Today I've tried 13th channel solution for better signal quality. When I select 13th or 12th channel, my neo not show my network in list Sorry..
Click to expand...
Click to collapse
That should be nothing about NEO I think
Can you try to use WIFI Analyzer? that's a great tool about troubleshoot that kind of problem, it should be able to tell you if your router set to a jammed channel or not.
tleung11 said:
That should be nothing about NEO I think
Can you try to use WIFI Analyzer? that's a great tool about troubleshoot that kind of problem, it should be able to tell you if your router set to a jammed channel or not.
Click to expand...
Click to collapse
After your suggestion, I've researched little more.
First of all, I'm using freexperia cyanogenmod now. It's have regulatory domain option in advances wi-fi settings. On the generic rom has'nt this option.
Anyway. In here; we are able to select total channel number. Options are 1-11, 1-13 and 1-14. I've selected 1-13 and see my wi-fi router in list
Guhrasoh said:
My german Neo with the stock 4.0.2.A.0.42 rom has no problems connecting to channels 12 and 13.
Click to expand...
Click to collapse
Can you post these rows from build.prop, please?
Code:
ro.semc.version.cust=1247-0900
ro.semc.version.fs=WORLD-1-8
I'm on global world posted in this thread [firmware]All Xperia Neo firmware download..., stock, rooted only, but can't see channels above 11.
@svrl, which of freexperia cyanogenmod you using - this: {NEO}[DEVELOPMENT] - CM7.1.0 - FXP044 FreeXperia Project?
FXP said:
WIFI - from source
Click to expand...
Click to collapse
is this same as stock?
EDIT: Tested Cobrato's rom CM7.1.0 - FXP044 for locked bootloaders on my old X10 and CAN associate with my router on 12 and 13 channels. Soon will install the rom on Neo...
@NerdiX
Right choice.
Only problem is FM receiver on freexperia rom. I hope it'll be fix'd
Here we are again. Please KEEP CLEAN this thread!
Working:
Audio
Gsm
Wifi
Data
Gps
Bluetooth
2D/3D
Touchscreen
Lights
Vibration
HW Keyboard lights
Full Camera/3DCamera
Full Videocamera
Videos in Gallery
PreRooted
etc...
Bugs:
Accelerometer
Download links in second post
Changelog:
V2:
- Because of the "official" port, no special addons, stock everything.
- All fixes was added. /Dialpad and Call log, Infiniteview, Gallery, Fm Radio, Camera flash, Inverted camera on LwW, and etc./
Credits goes for the app fixes /Stock Phonebook, Infiniteview, Gallery/ to: pallavikv
Download Links!
ROM:
[ROM] Official Sony ICS 4.1.A.0.562 GENERIC - v2
UPDATED!
Kernels:
Mini - ST15i
Mini Pro - SK17i
Active - ST17i
Live with Walkman - WT19i
Fixes:
.70 BaseBand to 2011 Xperia Devices
- In FTF, flash with Flashtool - not work in MINI! I'm working on it.
Big thx for you
Wow, that was fast, been waiting for this, thanks to u kamarush and expeacer u guys are the best when it comes to mini pro, mini and active
Sent from my Xperia Mini Pro using XDA
Is the download link for all phones?
BudgyN1 said:
Is the download link for all phones?
Click to expand...
Click to collapse
Yes, expeacer made it with aroma installer, so you can choose your phone model inside the app.
kamarush said:
Yes, expeacer made it with aroma installer, so you can choose your phone model inside the app.
Click to expand...
Click to collapse
What do you mean I can chose my model inside the app? Which app? Also I am on a Mac
Edit: Found out XD Thanks Kamrush and Expeacer!
Thanks for your effort. I will test it.
Is anyone else having trouble with the rom download link? I've opened the tab about 6 times and nothing... Ok nevermind, 8th time the charm lol
---------- Post added at 11:59 PM ---------- Previous post was at 11:58 PM ----------
BudgyN1 said:
What do you mean I can chose my model inside the app? Which app? Also I am on a Mac
Click to expand...
Click to collapse
Just install the rom and you'll see, there is an installer for each phone, you can't mess it up even if you tried!
phoneyericsson said:
Is anyone else having trouble with the rom download link? I've opened the tab about 6 times and nothing...
Click to expand...
Click to collapse
me too was having problem but after a while it success. Just keep pressing f5
BTW, thx so much for this ROM
BudgyN1 said:
What do you mean I can chose my model inside the app? Which app? Also I am on a Mac
Click to expand...
Click to collapse
After install zip and reboot, it will support selection model for you.
I don't have Mac. I think just fastboot the boot.img and go into the recovery to install.
sorry for my poor english.
ocovarr112 said:
me too was having problem but after a while it success. Just keep pressing f5
BTW, thx so much for this ROM
Click to expand...
Click to collapse
I think too many people want to download it, and the goo.im's server is overloaded
physicall keyboard isnt working on xperia mini pro sk17i.
Downloaded and flashed!
So far everything is working perfectly XD Only thing is the Setup Guide a bit buggy, had to go through it twice to finish and the touchscreen was unresponsive, but everything is working fine now!
Thanks guys!
---------- Post added at 12:14 AM ---------- Previous post was at 12:14 AM ----------
ocovarr112 said:
physicall keyboard isnt working on xperia mini pro sk17i.
Click to expand...
Click to collapse
Its working on my Mini Pro, are you sure you installed the right ROM?
ocovarr112 said:
physicall keyboard isnt working on xperia mini pro sk17i.
Click to expand...
Click to collapse
Everyone having the same issue?would love to try this ROM
Sent from my SK17i using XDA
BudgyN1 said:
Its working on my Mini Pro, are you sure you installed the right ROM?
Click to expand...
Click to collapse
Yes, it should be work, and the symbols are working too
BudgyN1 said:
Downloaded and flashed!
So far everything is working perfectly XD Only thing is the Setup Guide a bit buggy, had to go through it twice to finish and the touchscreen was unresponsive, but everything is working fine now!
Thanks guys!
---------- Post added at 12:14 AM ---------- Previous post was at 12:14 AM ----------
Its working on my Mini Pro, are you sure you installed the right ROM?
Click to expand...
Click to collapse
mini pro on aroma installer, mango kernel flashed... and everything ok, I think I will reinstall this ROM once again.
Maybe flash the kernel "after" install the ROM. Let my try some stuff and will give my feedback.
After install the kernel we have to do a wipe data and factory reset?
who can make a baseband 70 ftf?
i am using 64 now, it also work.
ocovarr112 said:
me too was having problem but after a while it success. Just keep pressing f5
BTW, thx so much for this ROM
Click to expand...
Click to collapse
I still can't download it using my phone xD, maybe ill try it on my pc when I get home
I'm so excited for this rom, damn this makes me feel hype!
Sent from my Xperia Mini Pro using XDA
what is the difference between MiniCM7-2.2.1 and MiniCM9-3.0.3-mimmi.zip? i followed the exact steps stated here.http://forum.xda-developers.com/showthread.php?t=1415026
At first i installed MiniCM9-3.0.3-mimmi but it didnt startup and im strucked in the nda boot screen.It wont go further,tried installing multiple times and the problem still exist.My phone is x10 mini pro(xperia mini pro).Now im putting my hands on installing MiniCM7-2.2.1.Will i have any success?
tiran119 said:
what is the difference between MiniCM7-2.2.1 and MiniCM9-3.0.3-mimmi.zip? i followed the exact steps stated here.http://forum.xda-developers.com/showthread.php?t=1415026
At first i installed MiniCM9-3.0.3-mimmi but it didnt startup and im strucked in the nda boot screen.It wont go further,tried installing multiple times and the problem still exist.My phone is x10 mini pro(xperia mini pro).Now im putting my hands on installing MiniCM7-2.2.1.Will i have any success?
Click to expand...
Click to collapse
Did you unlocked your bootloader?
Did you flashed a custom kernel supporting the ROM
MiniCM 7 is running Android 2.3
MiniCM 9 is running Android 4.0
Wrong thread
This thread is for MINI\PRO,RAY,LWW,ACTIVE
tiran119 said:
what is the difference between MiniCM7-2.2.1 and MiniCM9-3.0.3-mimmi.zip? i followed the exact steps stated here.http://forum.xda-developers.com/showthread.php?t=1415026
At first i installed MiniCM9-3.0.3-mimmi but it didnt startup and im strucked in the nda boot screen.It wont go further,tried installing multiple times and the problem still exist.My phone is x10 mini pro(xperia mini pro).Now im putting my hands on installing MiniCM7-2.2.1.Will i have any success?
Click to expand...
Click to collapse
First of all which phone do you have?! Xperia X10 mini/pro or Xperia Mini/pro?
The first one is from 2010 and is the correct one for the rom you linked to. If you have the 2011 version you cant use that rom.
ehnvis said:
First of all which phone do you have?! Xperia X10 mini/pro or Xperia Mini/pro?
The first one is from 2010 and is the correct one for the rom you linked to. If you have the 2011 version you cant use that rom.
Click to expand...
Click to collapse
He said he has X10 mini pro
piousheart said:
Did you unlocked your bootloader?
Did you flashed a custom kernel supporting the ROM
MiniCM 7 is running Android 2.3
MiniCM 9 is running Android 4.0
Wrong thread
This thread is for MINI\PRO,RAY,LWW,ACTIVE
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=24304432 is this the corect kernel for minicm9?
tiran119 said:
http://forum.xda-developers.com/showthread.php?p=24304432 is this the corect kernel for minicm9?
Click to expand...
Click to collapse
You flashed a wrong kernel!!
That kernel is for Xperia x8
Why you want to use CM 9
That tom is not good for day to day use as it has many bugs.
I recommend you use CM 7 its the best, smooth & fastest for x10s
piousheart said:
You flashed a wrong kernel!!
That kernel is for Xperia x8
Why you want to use CM 9
That tom is not good for day to day use as it has many bugs.
I recommend you use CM 7 its the best, smooth & fastest for x10s
Click to expand...
Click to collapse
will my phone get bricked now:O
tiran119 said:
will my phone get bricked now:O
Click to expand...
Click to collapse
Dont worry brother i will help you to
make your cute mini live again..:laugh:
Flash this kernel
piousheart said:
Dont worry brother i will help you to
make your cute mini live again..:laugh:
Flash this kernel
Click to expand...
Click to collapse
flash tool says it cant recongnise my device.And i cant switch on my phone
tiran119 said:
flash tool says it cant recongnise my device.And i cant switch on my phone
Click to expand...
Click to collapse
Is it going in flash mode?
If yes than first flash the latest stock rom with stock kernel
rdisky second
Its workinggggggggggg.yahooooooooooooooo...thanks alllll
tiran119 said:
Its workinggggggggggg.yahooooooooooooooo...thanks alllll
Click to expand...
Click to collapse
I'm glad:laugh:
piousheart said:
Dont worry brother i will help you to
make your cute mini live again..:laugh:
Flash this kernel
Click to expand...
Click to collapse
thankssssssssss...ITS WORKINGGGGGGGGGGGGGGGGGG
tiran119 said:
thankssssssssss...ITS WORKINGGGGGGGGGGGGGGGGGG
Click to expand...
Click to collapse
I recommend you to not use the CM9
its buggy for day to day use
so use CM 7 its best.
Just downloaded with SEUS and packed.
This is the WORLD version.
http://d-h.st/432
The changelog from sonymobile blog says that it includes improvements to:
- stability
- WiFi
- tethering/portable hotspot
- camera (capture and playback)
- NFC
- Messaging
about 3800+ downloads and 24 thanks... come on guys
On .10 and .54
I have a problem in games- cant turn off "Floating Touch" [CanKnockdown2, TrialXtreme2]
OmgGG said:
On .10 and .54
I have a problem in games- cant turn off "Floating Touch" [CanKnockdown2, TrialXtreme2]
Click to expand...
Click to collapse
You can't control floating touch on many games.
It's like this
Sent from my MT27i using xda premium
downloading..... any short reviews after actual use???
Is Bin4ry's root method working?
pulak861 said:
downloading..... any short reviews after actual use???
Click to expand...
Click to collapse
until now no freeze, it seems faster than previous firmware, maybe sony did it right this time
rohit3221 said:
Is Bin4ry's root method working?
Click to expand...
Click to collapse
i didn't try yet
UPDATE: Bin4ry's root method doesn't work! maybe it needs some tweaks
lalit387 said:
You can't control floating touch on many games.
It's like this
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Its a very bigest problem. Why sony dont fix? I cant understand.
OmgGG said:
Its a very bigest problem. Why sony dont fix? I cant understand.
Click to expand...
Click to collapse
Try FXPs CM 9.1 apart from some issues like audio Rom is of highest quality and speed best for games
Sent from my MT27i using xda premium
lalit387 said:
Try FXPs CM 9.1 apart from some issues like audio Rom is of highest quality and speed best for games
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
I dont play in game on smartphone. I angry because SONY cant fix it. I use unnofficial miui by SimbyOS (FXP 149)
Some problem in sound (sometimes interlocutor cant hear you-need reboot)
UPD:
This problem exists in other places, not only in games.
bin4ry method doesn't workin neither form me man...somebody have the solution?? Idon't want unlock my BL...
downloading file... im waiting for this! thanks man..
is it ok to flash this via flashtool with unlocked bootloader?
will my bootloader locked after i flash this ftf file?
yuskhanzab said:
downloading file... im waiting for this! thanks man..
is it ok to flash this via flashtool with unlocked bootloader?
Click to expand...
Click to collapse
i think it's ok
will my bootloader locked after i flash this ftf file?
Click to expand...
Click to collapse
don't know, my bl is locked
for root i think we need something like this [Root - Locked Bootloader] Xperia P 6.1.1.B.1.54
UPDATE: rooted! i'm uploading files needed to root
Here is the FTF i made. It is also the WORLD version, but my one says "Xperia Sole" instead of "Xperia Sola" when i connect it to the PC.
SI Number or ROM Location: 1261-8948 / WORLD
Branded or Unlocked: Unlocked
Device: MT27i
File: MT27i_6.1.1.B.1.54_Global.ftf
CRC-32: 97c7810e
MD5: 18ac0da0d056ca0a62c02cdb650b6ce8
File Size: 362.35 MB
Download Link:
http://d-h.st/6jJ
rohit3221 said:
Is Bin4ry's root method working?
Click to expand...
Click to collapse
if you want to root it via bin4ry method, just do it as i explain below :
1. flash 6.1.1.B.1.10 kernel
2. root it
3. flash back to 6.1.1.B.1.54 kernel
thats it! root at new firmware should be worked
Sent from my MT27i
pleomaxell said:
Here is the FTF i made. It is also the WORLD version, but my one says "Xperia Sole" instead of "Xperia Sola" when i connect it to the PC.
SI Number or ROM Location: 1261-8948 / WORLD
Branded or Unlocked: Unlocked
Device: MT27i
File: MT27i_6.1.1.B.1.54_Global.ftf
CRC-32: 97c7810e
MD5: 18ac0da0d056ca0a62c02cdb650b6ce8
File Size: 362.35 MB
Download Link:
http://d-h.st/6jJ
Click to expand...
Click to collapse
This is Central Europe version, mine almost same except the ETS Software Version: 1255-7850_102c :laugh:
The reason I still prefer this Central europe ver, its built with minimal unnecessary apps (standard like Earth/Echanted forest/Mcafee security/Office suite/Top contact), and the Send Usage Info
Try turn off the both animation, UI will faster.
could some please make me a torrent file of this...my pc cant download large files, crappy internet. would be really thankful.
also has the phone and messaging app become faster? and has the camera focusing also improved in low light????
srprashant91 said:
could some please make me a torrent file of this...my pc cant download large files, crappy internet. would be really thankful.
also has the phone and messaging app become faster? and has the camera focusing also improved in low light????
Click to expand...
Click to collapse
opening speed phone & messaging better than the previous .10 version. About your cam focus in low light time, my test time about 2x time than normal day light, is this slow or normal?
this .54 should be tiny bug fix + improvement from previous .10 ver.
Deleted
itachilinux said:
if you want to root it via bin4ry method, just do it as i explain below :
1. flash 6.1.1.B.1.10 kernel
2. root it
3. flash back to 6.1.1.B.1.54 kernel
thats it! root at new firmware should be worked
Sent from my MT27i
Click to expand...
Click to collapse
I think steps should be like this using Latest Flashtool
1. Flash .54 FULL
2. Flash .10 (Only Kernel)
3. Root using bin4ry V17
Should work as tried with successful result in older X Neo both GB & ICS
Please post the result
Currently I am downloading will post the result and feedback
Thanks all
lalit387 said:
I think steps should be like this using Latest Flashtool
1. Flash .54 FULL
2. Flash .10 (Only Kernel)
3. Root using bin4ry V17
Should work as tried with successful result in older X Neo both GB & ICS
Please post the result
Currently I am downloading will post the result and feedback
Thanks all
Click to expand...
Click to collapse
Yep that's the method to root
Works fine.
Can someone post a screenshot of "about phone" in .54 firmware. Just for some clarification. Thanks
I have a problem with my x10 mini pro for almost a year .. I don't know when it exactly has started ... when I'm working with my phone suddenly screen goes crazy and divides into 2 part...touch is steel working ...I have to turn off my phone or put battery out to make it right even for 2,3 times...I've installed different ROMs but the problem happens every time after 1,2 days working...(I've unblocked my bootloader longs tome ago)
I need SE ORIGINAL ROM link to test...
any other ideas?
pingulii said:
I have a problem with my x10 mini pro for almost a year .. I don't know when it exactly has started ... when I'm working with my phone suddenly screen goes crazy and divides into 2 part...touch is steel working ...I have to turn off my phone or put battery out to make it right even for 2,3 times...I've installed different ROMs but the problem happens every time after 1,2 days working...(I've unblocked my bootloader longs tome ago)
I need SE ORIGINAL ROM link to test...
any other ideas?
Click to expand...
Click to collapse
Your flex (the cable that connects the screen to the rest of your phone ) may be damaged or broken, it's the most common cause of this kind of behaviour.
SmG67 said:
Your flex (the cable that connects the screen to the rest of your phone ) may be damaged or broken, it's the most common cause of this kind of behaviour.
Click to expand...
Click to collapse
is it expensive?
pingulii said:
is it expensive?
Click to expand...
Click to collapse
Depends on where you live and if you can replace it yourself, I found one for about 10euros in an online shop.
I think I know your answer !
In my opinion, I think it's nAa kernel's bug. (If you're using it)
Simply update kernel or change to another like alfs kernel.
-I had the same problem(touch screen operates fine but screen out-put goes wild) , reflashing kernel solved my screen issue
sent via ULTIMATE GB beta
jay-z-s said:
I think I know your answer !
In my opinion, I think it's nAa kernel's bug. (If you're using it)
Simply update kernel or change to another like alfs kernel.
-I had the same problem(touch screen operates fine but screen out-put goes wild) , reflashing kernel solved my screen issue
sent via ULTIMATE GB beta
Click to expand...
Click to collapse
can u provide the link for alfs kernel ?
Sent from my U20i using Tapatalk 2
jay-z-s said:
I think I know your answer !
In my opinion, I think it's nAa kernel's bug. (If you're using it)
Simply update kernel or change to another like alfs kernel.
-I had the same problem(touch screen operates fine but screen out-put goes wild) , reflashing kernel solved my screen issue
sent via ULTIMATE GB beta
Click to expand...
Click to collapse
yes I've used nAa kernel !! last night I flashed the Original ROM android 1.6 ...and then with update service updated it to android 2.1
is it necessary to change my kernel now? I don't know whether my kernel is nAa or is it the stock kernel now ....
in my phone(about phone) its written :
2.6.29
SEMC user...
pingulii said:
yes I've used nAa kernel !! last night I flashed the Original ROM android 1.6 ...and then with update service updated it to android 2.1
is it necessary to change my kernel now? I don't know whether my kernel is nAa or is it the stock kernel now ....
in my phone(about phone) its written :
2.6.29
SEMC user...
Click to expand...
Click to collapse
You've got stock kernel now, If you still have the problems, it's not a kernel-fault. And I don't think our phones have the alfs-kernel available, i think that that was only cooked for the x8 or x10 (big one).
SmG67 said:
You've got stock kernel now, If you still have the problems, it's not a kernel-fault. And I don't think our phones have the alfs-kernel available, i think that that was only cooked for the x8 or x10 (big one).
Click to expand...
Click to collapse
Since I've changed my ROM into original , it didn't happen again....
pingulii said:
Since I've changed my ROM into original , it didn't happen again....
Click to expand...
Click to collapse
So it's perfect
If this happened again just reflash stock 2.1 rom
Or reflash your custom kernel (if you are using one)
sent via ULTIMATE GB beta
---------- Post added at 11:43 PM ---------- Previous post was at 11:41 PM ----------
SmG67 said:
You've got stock kernel now, If you still have the problems, it's not a kernel-fault. And I don't think our phones have the alfs-kernel available, i think that that was only cooked for the x8 or x10 (big one).
Click to expand...
Click to collapse
I've experienced this on my X8 on a rom built on pure cyanogen (ios themed)
So it's caused by kernel
sent via ULTIMATE GB beta
jay-z-s said:
So it's perfect
If this happened again just reflash stock 2.1 rom
Or reflash your custom kernel (if you are using one)
sent via ULTIMATE GB beta
---------- Post added at 11:43 PM ---------- Previous post was at 11:41 PM ----------
I've experienced this on my X8 on a rom built on pure cyanogen (ios themed)
So it's caused by kernel
sent via ULTIMATE GB beta
Click to expand...
Click to collapse
Rawwr said:
never
ever slide open the phone when the screen is locked
ur flex cable will get damaged and ur display will be in 2 partition
Sent from my U20i using Tapatalk 2
Click to expand...
Click to collapse
It`s true. Firstly my proxymity sensor stoped working. After that display was in 2 partions. Status-bar was at the bottom of the screen. Also my phone was unable to boot. It was always rebooting at the start. after disassembly i saw broken flex cable. now i am waiting for replacement parts. It is not a bug of nAa kernel !!! I tried both stock and custom rom!
if you happen to use an X10 mini pro then this is your problem. I already posted it on my thread here. http://forum.xda-developers.com/showthread.php?t=1935124
but if you are using an x10 mini then I can't answer you about your prob. but please read the thread and spread the word.