Related
Hey everyone, I am new to the rooting world however I have only experienced good things. I decided to root my thunderbolt using TB Autoroot+htc sync last night(had the original stock froyo, was going to installed cyanogen mod 7) and was successful. Unfortunately, I then installed the leaked 2.3.4 RUU GB which rerooted my TB before I installed the cm7(wanted to try the RUU out, bad idea lol). I was wondering if all or any of these are possible (dont care about losing data, just don't want to brick, ie avoiding command lines if possible):
1. root the phone while maintaining the leaked 2.3.4 RUU, just as was done for FROYO? Original reason for rooting was to remove the bloatware apps, but not having custom roms would be ok at this point if that is this is the only option. I know there is the revolution method to root, however will that work on the leaked 2.3.4 RUU?
2. root the tb with my current 2.3.4 RUU and install the BAMF 2.3.4/sense 3.0 GB build, or some other custom 2.3.4 rom?
A tutorial or walk through would be great! I know there are some out there, however I am looking for one specifically for those that have the leaked 2.3.4 RUU on the thunderbolt.
Also, can someone explain the difference in features of the GB builds that have been out for some time(customs) vs the RUU by verizon? I'm not talking about the physical aspects or the apps that come with, but more in terms of installing/switching between them. I know I need to root in order to install the custom roms, but assuming i can root the 2.3.4 RUU, will I be able to install any other 2.3.4 rom such as BAMF or cyanogen without problems? I have heard that you just arent allowed to go backwards, ie back to Froyo one you update to GB, but I should be able to install any 2.3.4 GB ROM once rooted via the bootloader(power+volume down) True?
Any help would be great! Thanks!
Yes you can. Just use revolutionary to root the new GB build. Here is a video tutorial for you.
Well, here comes your first less than pleasant reply...
Pretty much everything you wanted to know is posted in my thread stickied in the Q&A section. That's also where this post is going to end up. Please check my thread on basic noob questions, search before posting, and post in the correct forum.
Ota update after root
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Jeovanny said:
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Click to expand...
Click to collapse
If you are rooted, just use a program like root explorer to search for a file called otacerts.zip and rename it to otacerts.bak
When you open root explorer, make sure to put it into write mode. look at the top left side of the program and press on the mount r/w option
Cant find rom
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Jeovanny said:
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Click to expand...
Click to collapse
If you used your phone to download a rom, its in the "download" folder, move it to the root of sd card
Sent from my ADR6400L using XDA App
Root Error
I am trying to Root my Thunderbolt but keep getting the following error:
Failed to get Root!
I am using revolutionary.
I have installed, made sure their was a connection, and then removed HTC Sync.
I downloaded and installed Android USB Drivers.
I selected USB Debugging
Thunderbolt Info:
HBOOT 1.04.000
Android 2.3.4
ROM Ver 2.11.605.9
What am I missing and where can I get it? Can anyone help me out with this? Thanks in advance...
I've never rooted but I believe you need to downgrade. Revolutionary does not work with the latest OTA. There are several posts around that explain how to downgrade to the previous OTA (link below). Then you should be able to use the revolutionary method.
http://forum.xda-developers.com/showthread.php?t=1401959
Sent from my Thunderbolt using Tapatalk
Yes you need to downgrade to 2.11.605.5 then use reveloutionary
Is there wany way to unroot Android 2.3.5 on the Sgs2? I followed this guide:
(Google "samsung galaxy s2 android version 2.3.5 root", Top link).
The only reason why I rooted it was to calibrate the battery, now that that's done I want to unroot. I restored the stock kernel that came with 2.3.5 but still no luck, CWM and Superuser still stay there, with no way to removed them. Thans.
you need to flash the astock firmware to remove root not only the kernal.
there is another way to get rid of the root, use SuperOneClick v 1.91, and click on unroot to remove the root.
Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Same question here, thanks
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
gnahc79 said:
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
Click to expand...
Click to collapse
ok so now I screwed up and I am getting
svf 108 1:2
failted to boot 3
You got a failed to boot 3 using the fastboot preinstall method?? At which step did you get the error
Sent from my MB860 using XDA App
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
[Q] rooting help on 2.3.6
what is the proper way to root without unlocking the bootloader on 2.3.6 att?
http://briefmobile.com/motorola-atrix-4g-root
It still works
hdblab said:
http://briefmobile.com/motorola-atrix-4g-root
It still works
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
Root 2.3.6 one click
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1505900
http://forum.xda-developers.com/showthread.php?t=1502735
http://forum.xda-developers.com/showthread.php?t=1500819
The preinstall method is real easy. If that is too challenging then maybe you should wait for someone to volunteer to provide a 1-click/batch script on their own rather than requesting(demanding) it.
sillyshyme said:
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
Click to expand...
Click to collapse
I tried that before and I got soft booted.
Try again by using the instructions from the "Android-advice" website.
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Note: In those instructions specifically, it is important clarify that the phone should be in "fastboot" before entering in commands. Basically, do "step 6" before "step 4".
sillyshyme said:
I tried that before and I got soft booted.
Click to expand...
Click to collapse
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
przemeknzb said:
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
Click to expand...
Click to collapse
yes
btw, before you unroot 2.3.4. can you check if you have su, dosu and superuser.apk in /system/preinstall/ ? I'm not sure if I had those files when I was on 2.3.4, but I see them now on 2.3.6. I only removed the su related files as listed in the link when I was on 2.3.4, never removed su, dosu, etc from system/preinstall...guess it's not necessary for the 2.3.6 OTA to be successful on a locked bootloader.
I just rooted my Atrix after the OTA to 2.3.6 using this method. Worked perfect.
http://androidadvices.com/root-motorola-atrix-4g-45141-gingerbread-236-firmware/2/
no not had any of those files
tnedator said:
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
Click to expand...
Click to collapse
1) unroot 2.3.4 first:
http://androidforums.com/atrix-4g-all-things-root/423259-best-way-unroot.html
2) apply the 2.3.6 OTA update
3) redo the fastboot preinstall root method
btw before you unroot 2.3.4 can you check to see if you have su, dosu and superuser.apk in /system/preinstall? I see it now in 2.3.6 and am not sure if I had it there back when I was on 2.3.4
I didn't unroot before updating to 2.3.6 and now I can't get it to work. I keep getting the error "cp: write error: No space left on device", what should I do now?
Thanks.
sillyshyme said:
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Click to expand...
Click to collapse
what i did ...
UPDATE FROM STOCK 4.2.91 UNLOCKED BOOTLOADER AND ROOTED ATRIX 4G
try using OTA keeper from the market , before trying the OTA update , this is what i did
1 ) i unlocked my atrix 4g (2.3.4 all stock) with AUTOMATIC_UNLOCK_V4.2 and rooted with PetesMotorolaRootTools_v1.07 after that i installed CWM recovery
2 ) Make a Full backup of you rom using CWM and Titaniumbackup (never is enough)
3 ) MANY people say that using RSD LITE is not good , i just take the risk , because anyways the touch of my atrix is not doing good so i will be sending it to warranty soon anyways , i take the risk , i flash my atrix with RSD Lite 5.5 and this sbf
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
i don´t know any other people but i did not loose any data or apps from my atrix it was everything there , unlocked sign erased , CWM recovery partition erased , ROOT was there it is like everything go back to stock ... almost everything my data part was untoched.
4 ) download from the market OTA Root Keeper make a backup of your root and then press unroot temp
5 ) with that done I started to download and install the OTA update
6 ) after this point the phonewill reboot to stock recovery mode and start to upgrade it took almost 10 min to do the update after finishing copying files, it restarted 2 times on the moto logo then started booting , it take a longtime to pass the att boot image be patience mine took almost 5 min after that the phonestarted with everything loaded my apps , photos videos etc.
I think this could be a workaround (it work for me) for updating to .141 , also the baseband was updated to N_01.77.37P_usa_att
The only thing that was untoched was the webtop part , it stays on WT 1.2, ireally don´t use it , but i think if im already on 2.3.6 i can RDS the full SBF to get Webtop upgraded also the kernel say 2.6.32.9 is that the correct kernel for 2.3.6 i read that kernel is for a Froyo sbf not pretty sure
The thing now is , i wanna try installing CWM recovery and see if im already "unlocked" and try fruitcakes to downgrade 2.3.4 but i am not pretty sure about this i think i will get a brick
Also , you can try investigate to downgrade of wait for a generous dev to take out of the oven the fruitcake for 2.3.6 and try the method above
I TAKE no responsibility with this mini-tuto for anything that could happen to your atrix it on you own do this , i take the risk and it works !!!
thanks everyone
So I have a completely original Neo, still on the on the original Gingerbread (2.3.3) it had and I don't quite know how to proceed.
The only thing I do know is that if at all possible I don't want to unlock the bootloader.
Ideally I want to back everything up before I do anything but from my understanding Titanium Backup needs root to back everything up so that creates a bit of a catch 22. Similarly installing CWM so that I can access recovery is risky and could break everything so I'd want a backup first but for that I need either root or recovery so another catch 22. So what would be the safest option?
Also I want to update to ICS, I figure it's about time I get my phone current, but I don't know in what order I should do that in either...
Should I gingerbreak my Gingerbread and then update to ICS?
Should I just update to ICS and then root?
Should I upgrade using generic firmware to a version supporting the zergRush root, then root and then continue updating to current ICS?
I'm fairly confident I can get everything right first time on any method (and I know what all the methods are/am to not to lazy to research the methods myself) but I just can't figure out the safest course of action here...other than staying on Gingerbread for the duration of my phone contract.
Any help you can give me is appreciated.
Start by reading the stickies in the development section, do some reading and you'll know
look at the stickies in neo v section too
Ok so you're saying I should follow the "noob's guide" exactly and try a zergRush Root first? (Skip unlocking the bootloader since it'm not interested in cutoms roms with custom kernels) and then install CWM and make a nandroid backup?
Ok....but that still doesn't tell me whether I should update first or root first?
Also I can't seem to tell from it's thread whether the zergRush root works on the latest ICS (I don't see mention of .431 in the thread with .62 apparently being the last version that worked so that would be a no then?)?
Also my case is different because I could actually even still root with Gingerbreak if that was best/safest unlike most people trying to root (I never downgraded either so I wouldn't be exposed to the 0% issue).
ZergRush method doesn't work on fw's after .42.
There is another method, which you can find in sticky thread in general section.
First update, then root, as root is gone after flas/update.
p.s. whatever you do, just don't flash android 2.3.2 on your phone after you flash 2.3.4, but there is no really point in going to that old fw, same as there is no point in still being on 2.3.3.
Root is only gone if I don't update OTA
SCHUMI_4EVER said:
Root is only gone if I don't update OTA
Click to expand...
Click to collapse
Really? Thanks for telling me that..
I know that, I also know that you can't update from 2.3.3 to 4.0.4(which you said it's your initial goal, in your first post) via OTA. Or you can?
As far as I know I can but I admit I haven't checked yet. I don't see why once it's available for my region through the PC Suite it shouldn't also be available OTA.
Try and let us know.
It's not same if you're updating from x.x.x to x.x.y and from x.x.x to y.y.y, in first case OTA is possible, in second case I kinda doubt
I also didn't try, but if I remember correctly that's how it is.
Yeah but surely it should then just be 3 steps? So from x.x.x to x.x.y to y.y.y...that would would make sense to me anyways
Still reading up on a bit of other stuff then I'll check
http://forum.xda-developers.com/showthread.php?t=1973017
hope it helps..