Related
Hi Guys,
My Galaxy S2 came with KE7 I bought it in the UK and it's not branded to any network, I flashed CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4 and then the stock kernel and all was good.
A while later I tried to flash the clockworkmod from http://forum.xda-developers.com/showthread.php?t=1118693 ... that flashed OK but I couldn't get into the CWM recovery so I flashed the CF-Root back.
The recovery menu now works, but I still have the warning triangle on boot (I have tried reflashing the stock kernel again). This in itself doesn't bother me too much - I did this a month or 2 ago.
I've been told by someone that there is an upgrade available via Kies, however when connecting the phone Kies on Windows just tries to connect for ages and then gives up. (I have disabled USB debugging). Not that it should be relevant but I have previously removed Kies.apk, KiesAir.apk and kieswifi.apk using g-script but I put these back before trying to do this.
My phone currently reports:
Android: 2.3.3
Baseband: I9100XXKE4
Kernel: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2
Build: GINGERBREAD.XWKE7
Looking at these values, is the mix of XX and XW correct? (It's possible that I might have downloaded the wrong CF-root version the second time)
All I would really like to do is get the official version Samsung version and then root the phone. I believe that the Kies upgrade would still keep all applications.
Any help would be much appreciated.
You can find official, stock roms in the development threads
Sent from my GT-I9100
Thanks.
I've seen the thread http://forum.xda-developers.com/showthread.php?t=1075278 but I'm not sure which is the correct stock firmware for me.
Given the other issues I've described above I'm a bit 'concerned' that I've already done something wrong :S
EDIT:Re-editting my post cos Im blind and cant read good
Sorry dude I got all screwed-up there I have ta apolagize.Anyway you can download the one i told you and all will be cool as its a UK+Europe generic as stated and its XWKF3 but you are indeed on KE7 and you will find it here
http://forum.xda-developers.com/showthread.php?t=1075278
its XWKE7 ,Build Date 18/05/2011 generic XEU
.TO root go to this link.
http://forum.xda-developers.com/showthread.php?t=1103399
its a kernel flash via odin that takes,from hitting the start button,about 10 seconds to complete.It roots and puts CWM on your phone.The kernel you want is one of the first ones (xx-xeu-ke7).You Cant go wrong its all explained.
EDIT: You can also check to see if it really is unbranded by checking your product code by typing this number and checking the last 3 letters of your code *2767*4387264636#
Thanks very much. The PCode I have is GT-I9100LKAXEU.
I'm going to try the latest KI3 and see how that goes, failing that I'll reflash the I9100XWKE7_I9100XXKE4_I9100XEUKD1 I've just got (I note that this lists KE4 and KE7 in the filename, which does match the version I currently have).
The important part about your code is the XEU which is your local CSC.this is recognized by kies when you connect.The first thing Kies does when you connect is rcognize this code to identify the phone and look for the appropriate firmware update.When you flash a new firmware if its not official obviously kies wont understand it cos it doesnt register.Your Product Code says your phone is a UK model (XEU) so for example if you flash an official firmware and by default the phone sets KOR then kies has 2 conflicting CSCs and thus might decide not to connect.If you want your phone to work properly on kies then when you flash an official FW make sure you have XEU selected as your CSC marking *#272*(IMEI)# this will then reboot your phone although its always good to do a factory rest too.Do this anyway although not on an official FW as it might not always set the CSC to your area so it pays to check.
This is what Kies looks at for an upgrade .
http://forum.xda-developers.com/showthread.php?t=1089874
Spoof FW Check Fus may be worth a search also.
jje
Hi, guys!
I've been searching for a while now but can't find the answers I need.
Recently, I upgraded my S2 via Odin from:
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100OXFKE1
(2.3.4, Croatia)
file: I9100XWKI4_I9100OXFKE1_TRA.zip
to:
PDA: I9100BUKJ3
PHONE: I9100BUKI1
CSC: I9100VIPKI2
(2.3.5, Croatia - VIPNET)
file: I9100BUKJ3_I9100VIPKI2_VIP.zip
You might ask why did I flash the branded firmware - I did it because I was tired of waiting for updates that would come who knows when and Vipnet already had them.
Now, here's my problem description:
On the 2.3.4 firmware, after typing in this code: *#272*IMEI#, I could see lots of sales codes including the "TRA" code that works with Kies in my country. Kies also sees the firmware correctly (.../.../...) - no problems here.
On the 2.3.5 firmware I can see only one code and that's the one in the text field, there are no codes to select and change. Kies says that my current firmware version is: I9100BUKJ3/I9100VIPKI2/I9100BUKI1/I9100BUKJ3 (TRA)
and that my device does not support software upgrading via Kies.
Something happened here that got the software version confused, I believe it should be: BUKJ3/BUKI1/VIPKI2 (TRA)
So, finally my questions are:
How can I correct this software version/csc thing in order to get Kies willing to update my phone again?
Is there a croatian 2.3.5 firmware that installs correctly or csc I can flash to fix this?
Thank you!
Ivan
Edit:I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
from reading what you have written it seems that you have flashed a leaked firmware..
if thats the case then kies would respond the way it is till the official update rolls out..!
its nothimg to worry about because you can always change firmwares via odin!
hit the thanks button if i helped you..
Sent from my GT-I9100 using xda premium
playlet said:
Hi, guys!
and that my device does not support software upgrading via Kies.
Unless the codes match firmware uploaded to Kies then it cannot update .
Once you start altering the firmware you may no longer have matching codes .
Or their is no update for those codes .So, finally my questions are:How can I correct this software version/csc thing in order to get Kies willing to update my phone again?
Flash the original firmware or the same vendors firmware .
Remove Kies and Kies registry settings reinstall and try .
Or flash stock rom via Odin from the stock rom thread or search for the CheckFUS page may help .
jje
Click to expand...
Click to collapse
pls visit the thread..it may be helpful to get your CSC....and instructions...
http://forum.xda-developers.com/showthread.php?t=1075278
hit thanks if helped.......
Kies works with the original firmware that was installed on the phone (after flashing again). I just wanted to flash the newer firmware but on the other service provider since there is no update for my provider. The phone is not locked...
Would it be safe to flash ONLY the CSC (CSC_I9100VIPKI2.tar.md5) file from Odin (after the 2.3.5 firmware from the first post)?
Would that fix the wrong software version I've been getting from Kies?
playlet said:
Would it be safe to flash ONLY the CSC (CSC_I9100VIPKI2.tar.md5) file from Odin (after the 2.3.5 firmware from the first post)?
Modems kernels or CSC can be swapped around
Would that fix the wrong software version I've been getting from Kies?
Unlikely as CSC is just a list of the local area networks settings thats not actually needed for the phone to work .
jje
Click to expand...
Click to collapse
Okay then, I'll stick to this 2.3.5 firmware until there is official ICS for Croatia.
Thank you!
I just remembered something - I flashed the .tar.md5 file under the PDA section in Odin. Is that maybe the cause of this? Would 3 separate files for PDA, PHONE and CSC make a difference?
playlet said:
I just remembered something - I flashed the .tar.md5 file under the PDA section in Odin. Is that maybe the cause of this? Would 3 separate files for PDA, PHONE and CSC make a difference?
Click to expand...
Click to collapse
No if the tar has the modem and csc in it its all flashed as one through PDA
But their are some firmwares around that are in three parts
Flash via PDA rom Plus Modem In Phone and CSC in CSC .
They can always be flashed again /or separate .
jje
Is there some procedure for splitting the .tar or are those 3 parts something different than files in the .tar?
playlet said:
Is there some procedure for splitting the .tar or are those 3 parts something different than files in the .tar?
Click to expand...
Click to collapse
No the usual on XDA is single file with all in .
On samfirmware it can be three separate files PDA Modem and CSC .
jje
OK, thanks again
Hi, guys!
I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
Could you please share with us, what registry files need to be cleaned. A step by step instuction " if available" would be heaven sent
playlet said:
Hi, guys!
I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
Click to expand...
Click to collapse
I really don't know. I formatted my hard drive and reinstalled a fresh copy of windows so I don't have any info that would be useful to you
playlet said:
I really don't know. I formatted my hard drive and reinstalled a fresh copy of windows so I don't have any info that would be useful to you
Click to expand...
Click to collapse
Wow, just for Kies
Anyway, I think you could just : unninstal kies, download ccleaner or something like that, everything 2x, restart pc, reinstall kies.
I don't mind doing that as long as the result is good
Hi! Where I can download 2.3.5 for SGS2.
Link?
Thanks!
Davor
Search Samfirmware.com for the firmware you need.
Yes, type i9100 in the site's search box and them look for firmwares for Croatia. It's there...
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
leeackky said:
Hi there can't post in Development so here will have to do...
Ex SE Satio user moved over to android SGS2 and got one late last year from CPW (Car Phone Warehouse), Unlocked and with cpw stock firmware, I think it was XEU or one of the general ones, I rooted it using odin and was happy as larry, until the proximity chip failed, so I rehashed it back to Out Of Box and sent it back.
Great Then then sent it back with a different firmware, I'm still getting my head together with this but I'm sure I cant find it? and there is hardly anything online about it.
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
18/4/11
I wan't to root my phone, but can't find anything about, I could flash a different ROM on but then I wouldn,t be able to Back up if the hardware fails.
Thank You
Click to expand...
Click to collapse
I also failed to state that its...
2.3.3 and Kies say's "THERE WILL BE NO MORE UPDATES FOR THS PHONE."
???
Well if you want to root flash a cf root kernel via odin from the original development thread.
Also check out infratechs thread to see if he has this firmware there incase you need to revert back, once rooted just make a backup via CWM either via recovery mode or using the CWM app that comes with cf root.
Sent from my GT-I9100 using Tapatalk
Hi mate and Thank You for your quick reply. I've scoured the threads and the closest I've found is..
XWKDD
Firmware info
PDA:XWKDD
PHONE: XXKDH
Build date: 26/04/2011
Generic XEU
But I thought that when you rooted your device it had to be identical, I could flash Ice Cream, but then I wouldn't have anything to back up to if my device blobs?
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"Your device does not support software upgrading via kies"
I's that odd?
Don't worry about it, if you've got an o2 model just flash the latest UK firmware for o2, again in infratechs thread or maybe sammobile. You can flash o2s CSC anyway that will give you back the splash screen and such.
For now if you want to root, cf root is the easiest then flash away using CWM any of the plethora of roms available.
I suggest you flash a stock rom from Infratechs thread so you can update to the latest if you want LA2, then use CF Root to root. Then if you want ICS just flash that via CWM.
You can also use Checkfus (search on here) to find/download the latest firmware for your phone/carrier.
leeackky said:
=
O2 say's I shouldn't have this firmware and so does Samsung, Kies actually said..
"
PDA:I9100XWKD6
PHONE:I9100XXKDA
CSC:I9100CPWKD1
Its not O2 firmware its CPW firmware CPW is the clue
KD was a very very old firmware May 2011
What has the firmware to do with O2 its not an O2 phone .
UPGRADE CHOICES
One ask CPW service for an upgrade
Two wait for KIES upgrade if CPW upgrade KIES .
Their should be a CPW firmware and most definitely an O2 Firmware in the branded providers rom section .Or via CheckFus that should give you a backup of whats on the phone .
Carrier branded .
http://forum.xda-developers.com/showthread.php?t=1113928
or flash a stock 2.3.5 or 2.3.6 XEU from the stock roms thread
jje
Click to expand...
Click to collapse
As you said JJe, it is a CPW rom, and I knew it was an old one, but it's odd that CPW are sending refurb phones out with such an old ROM on it. I've decided to bite the bullet and go with the original ROM that I got with my first phone...
Product Code: GT-I9100LKACPW
Version: Android 2.3.3
HIDSWVER: I9100XWKE7/I9100CPWKD1/I9100XXKE4/I9100XWKE7
Bypassing this and going for...
I9100XWKI4/I9100CPWKH1/I9100XXKI1/I9100XWKI4 (2.3.4)
This is the original firmware plus KIES update to 2.3.4! I know that CPW were sending NEW phones out with this, so this will have to be my BackUp If my hardware blobs.
I'ts a shame I couldn't find the original ROM/Kernel. Checkfus did come in handy after all.
Many thanks for your help and patience you 3.
Now I just got to cope with FBI shutting down MEGAupload, as most of the Rom's etc reside there.
hey ya, lets say someone i know (wink ;D) is employee at carphone warehouse, and to tell you a fact, the repair centres tend to care very little if youve changed the firmware, at most they will charge you £10 to 'upgrade' the software to the latest official release, if you cant find it, i really wouldnt worry to much, most staff dont even realise what the yellow non stock firmware triangle is, though i would be sure to get rid of it just incase you get one clever clogs but for the most part, no big worry really
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
leeackky said:
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Click to expand...
Click to collapse
Make sure you have wiped data/cache and dalvik cache via recovery (If you have CWM recovery) otherwise pick a rom from the stock rom thread that says wipe, flash it via odin, then flash the new rom you want.
Just my luck flashed new ROM and i'm gettin "The process.com.android.phone has stopped unexpectedly. Please try again" every 5 minutes when i'm navigating through menus and that.
Turns out that it's incompatible with my sim card, the phone works fine when I remove it, but as soon as I put my sim back in I get the same error?
CF-rooted fine,CWM etc ok, but still this error, might have to try another ROM
Sussed It!
Flashed to XXI1, then flashed the CF-Root Kernel and wiped it, looked like veyka, it was my Backup that I was Restoring, because now it works fine with the SIM card, something from the Backup from that ROM was incompatible with XXI1!
Got just a DATA backup on CWM from main backup, will see what I can restore safely!
Got Yellow Triangle, no Jig. will try SuperOneClick method
Trial and error eh?
Thank you again. (buttons pressed.)
Hi guys,
have a question here
have a T-Mobile branded Galaxy S2 I9100 running 4.0.3. Due to the last update, i decided to flash the latest samsung stock rom in order to get rid of t-mobile branding and the possibility to update ( with Kies ) whenever newest rom is relased by samsung.
Followed the rules of flashing with odin given hier on the forum and everything went fine. Now if i check with *#1234# i get the I9100XENLP5 version of the firmware, which is good, but some problems remained and a new one appeared.
1- I didn't get rid of any bloatware apps of t-mobile and can't uninstall them either.
2- Connecting the phone to Kies does not show the firmware version of the cellphone but it says " Your device does not support software upgrading via Kies"
Is there a way to just flash the Galaxy S2 totally free of T-Mobile branding and after that to still be able using Kies for future updates?
Thanks in advance
erion_vl said:
Hi guys,
have a question here
have a T-Mobile branded Galaxy S2 I9100 running 4.0.3. Due to the last update, i decided to flash the latest samsung stock rom in order to get rid of t-mobile branding and the possibility to update ( with Kies ) whenever newest rom is relased by samsung.
Followed the rules of flashing with odin given hier on the forum and everything went fine. Now if i check with *#1234# i get the I9100XENLP5 version of the firmware, which is good, but some problems remained and a new one appeared.
1- I didn't get rid of any bloatware apps of t-mobile and can't uninstall them either.
2- Connecting the phone to Kies does not show the firmware version of the cellphone but it says " Your device does not support software upgrading via Kies"
Is there a way to just flash the Galaxy S2 totally free of T-Mobile branding and after that to still be able useing Kies for future updates?
Thanks in advance
Click to expand...
Click to collapse
Be more specific in your question TITLE... you may get answers then
erion_vl said:
Hi guys,
have a question here
have a T-Mobile branded Galaxy S2 I9100 running 4.0.3. Due to the last update, i decided to flash the latest samsung stock rom in order to get rid of t-mobile branding and the possibility to update ( with Kies ) whenever newest rom is relased by samsung.
Followed the rules of flashing with odin given hier on the forum and everything went fine. Now if i check with *#1234# i get the I9100XENLP5 version of the firmware, which is good, but some problems remained and a new one appeared.
1- I didn't get rid of any bloatware apps of t-mobile and can't uninstall them either.
2- Connecting the phone to Kies does not show the firmware version of the cellphone but it says " Your device does not support software upgrading via Kies"
Is there a way to just flash the Galaxy S2 totally free of T-Mobile branding and after that to still be able useing Kies for future updates?
Thanks in advance
Click to expand...
Click to collapse
Yes
No
Flash a stock rom will remove TMobile stuff
You may lose your Kies update path .
jje
just flash any of the roms from http://forum.xda-developers.com/showthread.php?t=1544487 that say unbranded on them
although i think you wont be able to update using kies but why would you want to anyway? Odin is so easy to use
Thanks guys for all your fast answers.
I solve it, found somewhere in another Galaxy S2 forum that after a flash you need to boot again in recovery mode and do a wipe/factory reset. This hepls to reset / rewrite the csc code ( TNL to XEN, in my case ).
This is from an other forum...
"One last final step is to change your CSC code by typing this code in the phone dialer *#272*<your IMEI># (the code will be listed at the top of the screen. If you're coming from O2 PAYG handset it should say O2U. Now Enter recovery (volume up, home, power keys together) and do a factory reset and choose reboot phone Check your CSC code again Hopefully it will now say XEU "
Maybe this final step can be added to the "Odin Flash guide " found on xda to prevent future threads like mine.
Cheers and thanks again
erion_vl said:
Thanks guys for all your fast answers.
I solve it, found somewhere in another Galaxy S2 forum that after a flash you need to boot again in recovery mode and do a wipe/factory reset. This hepls to reset / rewrite the csc code ( TNL to XEN, in my case ).
This is from an other forum...
"One last final step is to change your CSC code by typing this code in the phone dialer *#272*<your IMEI># (the code will be listed at the top of the screen. If you're coming from O2 PAYG handset it should say O2U. Now Enter recovery (volume up, home, power keys together) and do a factory reset and choose reboot phone Check your CSC code again Hopefully it will now say XEU "
Maybe this final step can be added to the "Odin Flash guide " found on xda to prevent future threads like mine.
Cheers and thanks again
Click to expand...
Click to collapse
It is posted in the flash stock rom guide flashing CSC .
jje
JJEgan said:
It is posted in the flash stock rom guide flashing CSC .
jje
Click to expand...
Click to collapse
I couldn't find that here in the Intratechs user guide ( forum.xda-developers.com/showthread.php?t=1075278 ).
I used the XEN stock rom from his site, was no CSC file inside the archive itself beside the XEN rom.
Hi All Below I occidentally posted in the Galxy SI900 instead of here< I got the usual replies but was grateful all the same. Maybe someone might help before I revert to stock...
Hi all, I know this has been done and dusted but I am having problems with connecting to kies after rooting. I am running standard jelly bean 4.1.2 and is an Australian GT-I9100. I installed the siyah kernal root system and now all I get on kies is "connecting" Windows 7 recognises and I can access the phone via explorer on the PC. The phone after a while comes up with a message that there is no compatible software on the PC, install kies...
I have tried all the so called fixes including formatting the internal SD and memory. The only thing I did before it stopped connecting was the root and running Triangle away (paid version). I have enabled / disabled USB debugging. The only things I haven't tried is a factory reset which I don't really want to do as I am always sceptical that the backup apps will work after to restore everything.
Any help appreciated
Click to expand...
Click to collapse
The thread is here: http://forum.xda-developers.com/showthread.php?p=45907982#post45907982
Hope someone can help...
Regards Ismael
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
jiseuo said:
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
Click to expand...
Click to collapse
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
IsmaelJones said:
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
Click to expand...
Click to collapse
Now I am not using KIES, because I use AOSP ROM (4.3 Slimbean), but in past, when i was using STOCK ROM (XWLSN, XWLSS) I used "PhilZ-cwm6 - Safe Stock Based Kernel" http://forum.xda-developers.com/showthread.php?t=1877270 to root my phone.
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
jiseuo said:
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
Click to expand...
Click to collapse
Okay had a look at this, thanks. I do have a question though, my Kernel (PDA) is XWLSH, I have downloaded the 2 files but I am wondering how to install? Do I use my CW recovery or do I have to revert back to stock? A little confusing as he dowsn't really give instructions and I am pretty much an amateur when it comes to some of these things? Also I am running JB 4.1.2 he only mentions ICS 4.0.4? Help appreciated here...
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
IsmaelJones said:
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
Click to expand...
Click to collapse
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
jiseuo said:
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
Click to expand...
Click to collapse
Hi Again, solved the problem... definitely the siyah root was the culprit. I used mobile Odin to install the stock kernel, once done checked and could connect in kies and was still rooted missing busybox only. After that I again used mobile odin to install philZ, again no problems and all seems fine now. Everything working.
Thanks a million for helping and also many thanks to mobile odin developers as this is a far better tool than most and saves connecting to the PC Odin. Also seems a lot safer...
:good: