Is there a site i can go and custom my own case for the htc amaze?? A hard cover case! i want to put my own design on it... not a sticker dont want no sticker skin! so post a link where i can get this done at!
Related
In my ongoing effort to find the perfect case I just came across this one on eBay:
http://cgi.ebay.com/Cingular-HTC-81...QQihZ014QQcategoryZ146430QQrdZ1QQcmdZViewItem
Does anyone have any experience with it? My main point of concern is how does one get to the slideout keyboard?
Thanks
David
My guess is that you'd have to remove it from the case to use the keyboard. As far as I know, the only soft cases that allow you access to the keyboard are the PDAir and the Piel Frama (the one with a snap strap, not the other one).
That case is awful as well as the metal cases they have on ebay, I have them both and I dont like either one, still trying to find a case for my wizard that the keyboard can pop out of, I thought about modifying the metal case but the hinges on the door are on the side I would need to modify.
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Malik05 said:
that...is VERY ugly! lol... check this one oout, found it on some other thread...
http://pdaden.com/shop/cart.php?target=product&action=view&product_id=18120&substring=wizard
Click to expand...
Click to collapse
That's a nice case but find it wierd that they neglected to show pictures of this with the keyboard open. Anyone seen reviews of this case?
You have a review right here on this forum:
http://forum.xda-developers.com/showthread.php?t=291434
I bought that case, same as the author of the post. And I have the same problem. The back part of the case stays in place if you're careful, but when you slide the keyboard open it pops out. It's a pitty, it's a really nice looking case.
Not sure if it'd fit the Dopod 838 as good though...
Hello,
since today i have for my TYTN the Seidio 3200mAH Battery in use.
But, its a brick (but I love it) and I need a case for it
Do you have tips for an leather case (pouch oder others) you fits the brick.
I tested the Seido Leather Case, hard way to take the phone out of the the case....
Thanks!!!
Oliver
Friend, you are in the situation i didn't want to be in. I was going to buy one of those battery types. Best advice is to go for a silicon one piece case from ebay. read my review. And put your other default battery back in the phone. Just use the bigger battery in emergencies.
I have yet to find a decent case that would fit the Hermes when its got the backpack on it like the one you are using. I spent weeks searching online for various cases too. You may get lucky. It may pay you to email someone like MK on ebay who make their own cases I think. I can't see it costing a great deal for them to put a case together that would fit your phone. They may tell you to wait until they get enough people wanting a larger form fit but its worth a try.
there could be a solution a DYI solution that is... and that would req to get a case to start with that is not for the hermes... BUT is the same exact width and height the depth to be the right side of battery...
now you would have to come up with some foam type or other material that you cut out exactly the shape to fit the extended battery case... and then cover it with some fabric and there you go... custom fit case for the extended battery
hey you could even find a material that is very light weight and would match without having to have a fabric material over and simply glue it on heh
hi all,
I work at a restaurant, and at work today I saw this guy with an x10 and a hard black case, atleast it looked that way it could of been soft plastic but it fit so well to the phone I doubted that. anyways the case was superb, covering the hard buttons but clearly showing the markings of the buttons on the case. I never got a chance to ask him, so has anyone reengineering or have a case like this or similar?? thanks a lot!
b
-------------------------------------
Sent via the XDA Tapatalk App
You can give it a try on eBay. I found some there. But can't buy because I'm from Romania and the transport is almost the same as the cost of the product. They are not expensive. I've made an order from a firm in Romania that has them from silicone. When I get it, I'll post an opinion.
seen some on ebay.
theyre not completely hard plastic, but not silicone either..
I think they were called "jelly" (even tho it's not anything like jelly)
just look for X10 case, and order them from lower price to more expensive.
I found them on the 3rd page or so.
http://forum.xda-developers.com/showthread.php?t=671028
there's a whole thread for this...
search and read before you post.......
Just bought New Back cover (hard Plastic) Black color.
The case is shiny, harder and better then Original back cover.
Pics would be better with a phone in it..
its perfectly fitted, but I have to find a nice cam to capture the pix !
I have bought Black Color TPU hard plastic case for my neo v 2 days ago. Its back is not shiny, neither i wanted something like that. Had seen my phones shiny back with tons of scratches enough.
So i got a rubberized case for my phone. The branding says "CAPDASE" [dnt really know why i mentioned that ] . But basically it provides extra grip for the mobile. and is absolutely scratch free, as i always wanted .
Its perfectly fit on the phone and looks great with my white color neo v
[EDIT] I can even post some Pictures if you guyz wanted to see.
Sure go ahead, show us, how it looks ?
here are mine ..
Here's mine.
PS - Photography is not so good
View attachment 1052474
View attachment 1052475
View attachment 1052476
View attachment 1052477
View attachment 1052480
View attachment 1052481
Cool Nice one, its much better, unfortunately, I didn't find such case in my local market so I bought that one ...
i have been searching for this type of case for about 2 months. and finally i got one
Hi, just wanted to see if anyone knows of a case that just covers the back but also has a kickstand? Looking for something without a front cover but also able to stand.
Thanks!
hi there!
i never tried but there is some :
http://www.amazon.com/ToPerk-Horizo...1168506&sr=8-10&keywords=galaxy+tab+pro+stand
http://www.amazon.com/i-Blason-Sams...615&sr=8-12&keywords=galaxy+tab+pro+stand+8.4
http://www.ebay.com/itm/FULL-BLACK-...TAND-SAMSUNG-GALAXY-TAB-PRO-8-4-/371071293719
http://www.alibaba.com/product-detail/Ruggerd-Hybrid-Armor-Hard-Case-Stand_1690872030.html
thanks! i don't really want to slap a case on this thing but might try the ebay link. looks exactly the same as the iblason case without a logo?