Hi i have a Samsung Galaxy S2 I9100P (NFC Model) and need an original O2 UK rom for Gingerbread 2.3.5 as I have to send it off for repair.
Version
PDA: I9100PXXKJ4
PHONE: I9100PXXKI3
CSC I9100PO2UKJ2
If anyone with a NFC model on O2 could make a backup of there ROM i would be greatful
Thanks
no O2 on checkfus nor sammobile............badluck
you can put O2 i9100 firmware and act dumb ?? at warrenty
Lol i dont think acting dumb would be a valid reason for voiding my warranty.
Surely someone on here has the same phone and could just do a backup through Clockwork and then upload it?
Ive messed up my phone and would like
PDA: I9100PXXKJ4
PHONE: I9100PXXKI3
CSC I9100PO2UKJ2
My phone says:
PDA: I9100XXKJ1
PHONE: I9100XKI4
CSC I9100O2UKJ1
and ofc with out the P
if anyone could help be most greatfull
Related
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Thanks in advance for your help.
nicolas2011 said:
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
Depends upon what CSC flashed their is no generic CSC .
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
Debranding is not unlocking .
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Kies updates branded phones .
CSC
http://forum.xda-developers.com/showthread.php?t=1075278
Spoof FW
http://forum.xda-developers.com/showthread.php?t=1110160
jje
Click to expand...
Click to collapse
Thanks very much for this info. At the end I did a factory reset after updating and now phone shows XEU as expected.
Hi im from Ireland and i recently bought an unlocked samsung galaxy s2. My network provider is Meteor but the phone has inbuilt vodafone hardware on it and sometimes when i connect to the internet it still thinks im a vodafone customer. I brought the phone to a meteor store and asked was there anyway to correct the problem and they said it was a hardware problem and that i had to change the hardware and that they couldnt do anything for me but recommended this site. So if anybody could help me with this problem it would be very much appreciated.
Read and understand what you are doing before flashing.
flash this to your phone it will give you meteor settings it is stock firmware.
Meteor​Ireland
XWKF3: http://www.multiupload.com/ZG51DE8J1T
Firmware info: PDA: XWKF3 Phone: XXKE7 CSC: METKE1
XWKF3 Stock Kernel:http://www.multiupload.com/5EXK8MLNE7
Password: [email protected]
flashing guide
http://forum.xda-developers.com/showthread.php?t=1075278
Plz tell me how can i debrand my s2, which comes from H3G UK, and i am in Pakistan.
Which unbranded rom will be best for me.
my S2 details,
PDA: I9100XWLPY
Phone: I9100PBVLP7
CSC: I9100H3GLP7
I changed my baseband to BVLP7 previous was NELP4, due to battery and signals issue someone adviced me to changed baseband.
first i tried NELP3 than BVLP7.
I want to flash it . Should i flash it Stock ICS which is for Pakistan, or anyother.
Thanks in advance...
I'am using a rooted I9000 for about 2 years and now want to switch to my new i9300. There are two thinks i hope you guys can help me with:
I'm not sure which I9300 version i got, if its sprint, verizon etc.. The phone is from germany and afaik it wasn't ordered over an telecommunication provider. That's what i can tell about the phone:
build-nr: JZO54K.I9300XXELL4
AP: I9300XXELL4
CP: I9300XXELL4
CSC: I9300DBTELL1
If everything went wrong with my i9000, i was able to do a cruel repair by flashing the official 2.3, which fixed nearly everything.
Can I do something similar with the I9300 ?
Thanks in advance
nercc said:
I'am using a rooted I9000 for about 2 years and now want to switch to my new i9300. There are two thinks i hope you guys can help me with:
I'm not sure which I9300 version i got, if its sprint, verizon etc.. The phone is from germany and afaik it wasn't ordered over an telecommunication provider. That's what i can tell about the phone:
build-nr: JZO54K.I9300XXELL4
AP: I9300XXELL4
CP: I9300XXELL4
CSC: I9300DBTELL1
If everything went wrong with my i9000, i was able to do a cruel repair by flashing the official 2.3, which fixed nearly everything.
Can I do something similar with the I9300 ?
Thanks in advance
Click to expand...
Click to collapse
1. The International S3 GT-I9300 with a German ROM http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=DBT&os=1&type=1 (please search next time)
2. You can always reflash any (custom) rom by using Odin.
So if you would flash the XELL4 Rom you'll be back to a fresh stock rom.
Hello everyone,
I hope you can help me somehow. My girlfriend has SGSII GT-I9100, after small blackout we send it to service repair ... Phone is repaired, but service flash phone to JB 4.1.2 ROM ...
But, my GF want the old one, the original 2.3.3. she has SII from CZ T-Mobile Czech Republic Product Code: GT-I9100LKATMZ and there was 2.3.3 BOKE3 FW.
Can you please tell me where I can download that old firmware? Or can you send me it? I can only find JB FW It's not necessery to have TMZ version, it can be one from this:
I will be very thankful
I looked on Sammobile.com, used SamFirm app but nothing :crying::crying:
Generic
Product Code: GT-I9100HKDXEZ
PDA: I9100XWKE2
CSC: I9100OXXKE2
Phone: I9100XXKDJ
O2
Product Code: GT-I9100LKAO2C
PDA: I9100XWKE2
CSC: I9100O2CKE1
Phone: I9100XXKDJ
T-mobile
Product Code: GT-I9100LKATMZ
PDA: I9100BOKE3
CSC: I9100TMZKE3
Phone: I9100BOKD1