Related
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Bump bump, bump it up!
Do you use the original SE in-wall charger? If not, thats the problem, if yes I recomend to test with a different wall charger (eg. from another device)
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
It could possibly be your cable as mine broke a few weeks back (Same Problem), I just replaced the cable now its fine
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Maybe the connector in the phone is broken????
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
blade828 said:
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
Click to expand...
Click to collapse
Rockdale? 6 weeks?! Not going that far. :-/ I can live with just charging from the PC at the moment.
Thanks though Sad news indeed
Is is still under warranty? It will eventually stop charging from the PC too. I was waiting for parts to arrive so maybe they have them in stock now. That was 6 weeks from melbourne and back.
Going through the same thing in the US. I was told repair would be 5-7 days, but I'm sure I'm looking longer. If it comes back within the time frame they gave me I will be pleasantly surprised. I hope you're still under warranty and do your self the favor and send it in or soon you will have a very expensive paper weight. Good Luck!
I went through the exaxt same thing. It stopped charging from the wall but could only charge from computer but eventually stopped charging altogether.
Did you try taking out the battery and plugging in with the original se microusb cabe to the wall. After 5 min. put the battery in. First time didnt work for me but then i took out the battery again and put it back in immediately and then it turned on.
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Out of curiosity, how long before each of your X10's stopped charging altogether? :S
Because, for me, it's been longer than two months and throughout that time I've managed to keep charging it via the computer.
Thanks.
Mayazcherquoi said:
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Click to expand...
Click to collapse
I've 3 usb-to- chargers here:
From a MP20 phone, generic charger that can't charge my phone and also can't charge most of other devices, output power and voltage are low.
From an old Ipaq(not ipad) it does charge my x10 for some reason takes longer than the original, it says on it 1000mA and 5V, I don't remember the real amp and voltage on it.
And the original one, always charge really fast(2 hours for a full 0 to 100% when the phone is ON)
Conclusion, buy and original charger if you not using one, which seems to be the case.
OR, update your baseband if possible, as battery issues are normally related to baseband are normally the cause of this errors.
To make sure you can always try to do a SEUS repair.
Neo said:
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
Click to expand...
Click to collapse
Sorry to say this, but your are wrong man.
My charger says 5.0V which is exact the same voltage as any USB ports(exception for some internal USB ports used commonly for bluetooth and other low consumption devices that use 3.0 to 3.3V).
The difference is mainly on the amount of power amp it can supply, the original usb cable + wall charger provides 700mA, while in the PC USB 2.0 ports provide 500mA, 1.0 USB provide 100mA and 1.1 I don't remember now, generic usb wall chargers say sometimes they provide 500mA but they mostly provide 30l0mA and sometimes they do not provide on 5.0V they oscillate between 4.6 to 5.2V a good usb port have to provide 4.95V to 5.1V any difference from this may even burn a phone if higher and not charge or reduce a battery life if too lower.
Everytime a battery is not charged up the end of 100% they battery life gets a bit reduce as next time even if you leave it to charge up to 100% it won't really be at 100%, this can only be seen by measuring the battery voltage after the charge, fully charge it must reach up to 4.7V
on the battery or something like this.
Mayazcherquoi said:
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
Click to expand...
Click to collapse
If the cable is too thin(like 1.0 usb cables they can't handle 500mA if connected to an already extended usb port it may not get recognized and also not even charge.
Laptops usb ports may not allow 500mA it different for every laptop, some work, some doesn't and others your have to set that on bios.
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Always when connected to the PC it should say charging, if it did say discharging at some point then there was something wrong.
But charging on the pc is very slow and not good.
denenatse said:
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
Is there any other model of charger than a usb-to-wall? Sorry my lack of knowledge on this, but i never saw a wall direct charger for x10.
Thanks button is appreciated, rsrsrs
It will charge when its usb to PC but not wall.
Anyone have the problem before and know if its fixable?
Tried 2 different Cables that worked before also will try again when home with official charger.
The wall charger will be the problem most likely since most cells use 500mha to charge and the ATRIX charger uses upto 1000mha the ATRIX wount even recognize a charge cycle with less then 600 mha
Sent from my ics+darkside multiboot mb860 using xda premium
Anyone have a charger problems? My charger cable works fine as it recognizes when its plugged into a computer, but the bottom part doesn't work. What's really weird is when I plug the dock and tablet in, it will pretend to be charging and completely drain the dock to fully charge the tablet.
I'm not quite sure what you mean by "bottom part", do you mean the AC wall adapter?
cullenmq1 said:
Anyone have a charger problems? My charger cable works fine as it recognizes when its plugged into a computer, but the bottom part doesn't work. What's really weird is when I plug the dock and tablet in, it will pretend to be charging and completely drain the dock to fully charge the tablet.
Click to expand...
Click to collapse
Yeah but after the tablet is completely charged it charges the dock
Sent from my HTC PH39100 using XDA Premium HD app
bigballa said:
Yeah but after the tablet is completely charged it charges the dock
Sent from my HTC PH39100 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah that's what it should do, but mine doesn't charge at all. It just drains the battery on the dock and doesn't recharge at all. And I'm referring to the AC part
Hi Guys
Have a problem on my prime now.. everything I try to charge it - it doesn`t work...
Last time I`ve charged it was 2 days ago.. Have somebody the same failure ?
I have to order now a new wall charger and cable now or what you think ?!
PipoXtreme said:
Hi Guys
Have a problem on my prime now.. everything I try to charge it - it doesn`t work...
Last time I`ve charged it was 2 days ago.. Have somebody the same failure ?
I have to order now a new wall charger and cable now or what you think ?!
Click to expand...
Click to collapse
I noticed you posted this in WSG's thread...I was curious if you changed anything within the last two days? Rom or Kernel? if so, go back to what you were running two days ago (restore nandroid or whatever). Are you charging just the tablet with the AC? Try a different outlet? I guess you need to rule out all possibilities to see if it is actually the wall charger. Good luck!
I tried everything.. restored backup 15 days ago and everything.. but always the same - tried as well to charge my sgsII with the wall connectore there it works.. but on the usb cable I think there is the problem.. now I`ve ordered the wall connector and usb cable to replace it.. hopefully my result is correct on this issue..
Hi, my s3 charges very slow. he's charging for about six houres now and he's at 43%...
Could it be the USB cable?
Heeeelp!!!
Sent from my GT-I9300 using xda app-developers app
Check your AC adapter, especially if you're using the travel adapter. If the connection is loose, it will think you're charging with USB. Go to your phone settings and make sure it says "Charging (AC)" and not "Charging (USB)"....unless you ARE charging with USB, then it's supposed to be slow...iono about 6 hours though...
sam-san said:
Check your AC adapter, especially if you're using the travel adapter. If the connection is loose, it will think you're charging with USB. Go to your phone settings and make sure it says "Charging (AC)" and not "Charging (USB)"....unless you ARE charging with USB, then it's supposed to be slow...iono about 6 hours though...
Click to expand...
Click to collapse
It says AC...
Check..
Are you charging from computer or the power point. Are you using the charger you got with your phone?
I had the same problem with my phone. Turned out it was the USB cable. Got it replaced from Samsung. You might want to check a different USB cable or a different charger. If you are trying a different charger do make sure the output matches with the stock charger. Also have you tried resetting it back to factory default?
Sent from my GT-I9300 using Tapatalk 2
Charging from powerpoint... wtf? After 4 houres he didn't charge at all... ?? Trying a new cable now!!
Replace
liobeir said:
Charging from powerpoint... wtf? After 4 houres he didn't charge at all... ?? Trying a new cable now!!
Click to expand...
Click to collapse
Yep its definitely the cable. you should get it replaced :laugh:
A new cable fixed it! Srry for the panic!!!
Sent from my GT-I9300 using xda app-developers app
Battery charging incredibly slowly even after switching cables
I got the notification to update my I9300 to Jelly Bean yesterday and went ahead with it. The battery lasted an okay enough time, but I left it plugged in using the stock wall charger overnight. After almost 11 hours, it has only gone from 10% to 75% and I've seen it drop a couple of times while I've gone through the settings. Switching to another charger doesn't seem to make a difference and using the CurrentWidget app shows about 999mA all the time. I haven't rooted it or anything, so it has been difficult to find threads with the exact same issue. Is anyone else experiencing something similar? Thanks!
pazow said:
I got the notification to update my I9300 to Jelly Bean yesterday and went ahead with it. The battery lasted an okay enough time, but I left it plugged in using the stock wall charger overnight. After almost 11 hours, it has only gone from 10% to 75% and I've seen it drop a couple of times while I've gone through the settings. Switching to another charger doesn't seem to make a difference and using the CurrentWidget app shows about 999mA all the time. I haven't rooted it or anything, so it has been difficult to find threads with the exact same issue. Is anyone else experiencing something similar? Thanks!
Click to expand...
Click to collapse
hi there i just got the same problem as you are getting right now im observing my gs3 and found the charging is very slow 1% evry 30mintues and that the condition is the brightness is low wifi and 3g is off i notice this happen just this morning after 24 hour of chargin using the AC charger from the galaxy s2. right now im using usb cable plugin to the wall out let and also tried plug it in to usb port still having slow charging issue my s3 is JB updated and that it is not rooted, before all this issue happen i was using the same usb cable tha im using bow 2days ago and i have no issue i could watch movie while plugin to the usb port or the wall outlet and im still around 94 to 97% charge with full brightness on and wifi and 3g is on, im in singapore and the outlet here is 220v. ill try to check if might be thusb cable is the issue r not.
my problem is the cable. i used my old samsung phone's charger and it worked!
Same here..
Same problem here, the i9300 charged almost nothing through the night. It recognised the charger as AC. After I woke up, I just took the cable out and reinserted it, then it charged way faster the short while before I went to work. I read somewhere that phones with jelly bean installed OTA over gingerbread could have this problem? I can't really say if it's the charger, the cable or the phone that is the culprit. I have previously had a problem with getting the phone to accept my car charger as well..
The cable you use makes a huge difference.
Best to use the original cable, using an old Nokia cable also works fine.
Be ware of 3rd party cables that for some reason dont deliver sufficient juice to the phone and then it charges very slow....
I guess I should add that I used the original cable and charger. I'll come back with a post if I experience more problems.
Sent from my GT-I9300 using xda app-developers app
Guys so I have this dell streak for which my wife left the charger at her sister's house which is very far off and the battery is completely out of charge. I was trying to charge it through USB port and even with Iphone charger by using dell USB cord but it is not charging and not turning on. I have read before that when the battery is flat you cannot charge through USB port. Is there any way around it? Let me know please I cannot use the phone....
you mean when you first connect to usb no sign of live at all? it should show some sign of live after a few seconds connecting to usb port..
Maybe a bit radical but... have you considered tearing apart an old usb cable and connecting it to the battery for a few minutes? Someone else should say if this is a terrible idea or not, but in my (ignorant, maybe?) mind sound like an option (being no other options available, of course)...
ag82 said:
Guys so I have this dell streak for which my wife left the charger at her sister's house which is very far off and the battery is completely out of charge. I was trying to charge it through USB port and even with Iphone charger by using dell USB cord but it is not charging and not turning on. I have read before that when the battery is flat you cannot charge through USB port. Is there any way around it? Let me know please I cannot use the phone....
Click to expand...
Click to collapse
That was an issue with the Streak 7 but the 5" has no such issue. If it won't charge via USB then your problem is either a bad battery, bad cable or bad port... it should charge just fine via USB
Sent from my cm_tenderloin using Tapatalk 2
I have been in a similar situation, using a dell battery, cable, and a sufficiently powered usb port, so I wouldn't be so sure about the issue not being also present in the 5 inch model...
Sent from my Dell Streak using xda app-developers app
europeancity said:
I have been in a similar situation, using a dell battery, cable, and a sufficiently powered usb port, so I wouldn't be so sure about the issue not being also present in the 5 inch model...
Sent from my Dell Streak using xda app-developers app
Click to expand...
Click to collapse
More than likely a bad port and or bad battery. But charging is not a known issue with the 5. I've worked on nearly a hundred here in Costa Rica as I'm about the only person here with knowledge of them and discharging to flat zero is a practice I do on each one I service and not charging via USB was only an issue when there was a hardware problem.
Sent from my cm_tenderloin using Tapatalk 2