I have seen the Pelican case made for the ipad that has the rubber inserts for the pad in the lid and the dock and accessoriesin the base. Has anything been made for the prime?
Related
Just received this case,
http://www.caselogic.com/10_2_ipad_...l/index.cfm?modelid=154701&productid=10030361
Fits perfectly, the inside opening is a little thick, made for a 1.5" netbook but I added a couple layers of foam and the G Tab fits like a glove. Just about the perfect case and it's on sale.
It looks like a lunch bag.
I picked this up for my Acer 1. While I am waiting for my Malata M1 to arrive I have used it for my G-tablet and it is surprisingly perfect. It holds my tablet, charger, cleaning cloth and stylus very comfortably. Plus, it has a very professional look and feel.
Targus CityGear NetBook Case
After messing with a couple of bags, I ended up buying this one. It fits the gTab perfectly in the padded sleeve even with it inside of my sweet CaseCrown case and has room for my little Gear Head keyboard with multi-touch touchpad as well as the dock, and my foldable Arkon stand, the spare power adapter, and other odds and ends in the little compartments it has. It's fairly cheap too. My only negative on this bag is that the shoulder strap is not removeable.
The Encase neoprene sleeve for 10" netbooks really fits my GTab like a glove. It is kind of snug lengthwise and there is maybe 0.5" of extra space widthwise, but it comes very close to fitting the dimensions of the GTab. Unlike a lot of neoprene sleeves made for iPads or netbooks, this sleeve is more "rectangular" shaped instead of being more "square", which is good because the GTab is more rectangular than an iPad. Here a link to Amazon, but these are also on eBay.
http://www.amazon.com/Encase-Envelope-Black-Neoprene-10-0/dp/B002QWPMSK
I like that this one fits exactly L x W with no movement, it's thicker and leaves room for adding a little more padding or slipping in a slimline keyboard, there's also a zippered pocket that will hold the power adapter and stand without a problem.
The strap isn't detachable but can be used from the top, side or un-fasten a couple of Velcro straps and it becomes a shoulder strap.
The case is more rigid than the neoprene ones I found at OD, more along the lines of a laptop case.
Also couldn't pass up the price
chili_red said:
I like that this one fits exactly L x W with no movement, it's thicker and leaves room for adding a little more padding or slipping in a slimline keyboard, there's also a zippered pocket that will hold the power adapter and stand without a problem.
The strap isn't detachable but can be used from the top, side or un-fasten a couple of Velcro straps and it becomes a shoulder strap.
The case is more rigid than the neoprene ones I found at OD, more along the lines of a laptop case.
Also couldn't pass up the price
Click to expand...
Click to collapse
That is a nice case. I may pick one up at that price for times when I'm going somewhere with just the GTab. I like the neoprene Encase sleeve I posted above for times when I'm putting the GTab into my bag and want just a little extra protection to prevent scratching my GTab.
I have one of the Philips docks and was wondering if anyone knows of a goods case that I can use. I have the Aluminum Taurus case and I have to take it off to dock. Was wondering if anyone else uses a dock with a case that fits.
I haven't seen the philips dock but I picked up the Zenis dock off of ebay. Was cheap, only $11. It allows use of some thin cases such as the SGP Air Series cases. I am currently using the SGP Linear Series and unfortunately it did not fit on the dock. However since the dock was cheap, I took a dremel to it and quickly made the opening bigger. I can now use it with the case on without issue. Not sure how much the philips dock was but if it was cheap enough, I would recommend trying the same.
I have a Ringke Slim on my phone and it works with the Deidio Innodock Jr. The bottom the dock says it is designed for "skin" and thin cases.
There are a lot of cases out there now and more keep coming. I've bought just about every one I've seen. My favorite of course is the Caseen skinny but I also like the Moko. There are about 3 or 4 different Moko models cases out there but I wanted to specifically point this one out. While most cases don't even provide speaker holes this one does. It is a nice one.
http://www.amazon.com/MoKo-GENUINE-...8?s=electronics&ie=UTF8&qid=1329357292&sr=1-8
I have nearly the same case. Mine is the MiniSuit 360 degree "swivel" view, the tablet and surrounding case can snap off if you just want to have it in your lap, and it has a little strap if you want to secure the folio closed. I really like these styles in general, they are all very similar. I didn't think mine would have speaker holes but some of these pictures don't show that there is cut out on the side (v. Perforated holes)
I have seen the Pelican case made for the ipad that has the rubber inserts for the pad in the lid and the dock and accessoriesin the base. Has anything been made for the transformer line?
What is the thinnest folding case available
I am looking for a case for the 300 that is as thin as possible. I really only care about scratch protection, I don't expect it to protect from drops (not that most case will provide that protection anyways). I do need it to have a stand function to watch movies. Since this is already thicker than prime I want to minimize that as much as possible.
Even the cheapie vinyl thin case that came bundled with the Acer a500 at costco would be fine. It was very thin.
The case I have for my ipad2 is tapered at the edges to keep the profile as thin as possible instead of being just squared off at the side edges. In other words, it should wrap around the side edges like a glove.
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
mickey878 said:
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
Click to expand...
Click to collapse
decent but not quite what I am looking for. The case you are talking about clips or hooks onto the tablet in about4 to 6 areas (4 corners plus maybe 2 additional top and bottom). It leaves alot of the edge exposed. On th eplus side it is usually a hard back case so decent protetion.
However, what I had in mind is a case that slips all around the edges of the tablet. Most cases are designed like this but except what I have in mind would be slimmer with the edges tapered to match the edge of the tablet but still wrapping the entire tablet (except at the ports). Hard to tell, but I think this case fits that description but it is for tf101 only:
http://www.amazon.com/rooCASE-Leath...9?s=electronics&ie=UTF8&qid=1337799671&sr=1-9
Honestly? I am still waiting for something the like the shell+smartcover that my mom's Ipad has. That really is brilliant stuf.
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
I have one and had to adjust the hole for the headphone jack.
But it works pretty good, is a lot thinner that some other case I bought and has a cut out for the charger.
But an Ipad-like smartcover .. to me that's the bomb
WOEHAA said:
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
Click to expand...
Click to collapse
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
KryptosXLayer2 said:
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
Click to expand...
Click to collapse
These are nice! To bad the carbon fiber one won't be out until June 18!
From my long awaited and totally worth it EVO LTE!
All 3 of these are pretty much the same and is the thinnest case out in the market:
http://www.amazon.com/MiniSuit-Tran...U7SW/ref=sr_1_4?ie=UTF8&qid=1338346700&sr=8-4
http://www.amazon.com/Poetic-HardBa...ZERO/ref=sr_1_1?ie=UTF8&qid=1338346673&sr=8-1
http://www.amazon.com/MoKo-Slim-Fit...57RI/ref=sr_1_8?ie=UTF8&qid=1338346673&sr=8-8
I found what I was looking for but unfrtunately it is only for TF101
http://www.amazon.com/rooCASE-Leath...8517&sr=8-1&keywords=roocase+tf101+tf300+slim
I also found a similar case on Ebay but it looks slitghtly cheap. I wish it wasn't microsuede:
http://www.ebay.com/itm/ASUS-Transf...?pt=US_Tablet_Accessories&hash=item3cc88b0bbc
This case is also very thin but I can't find it anywhere outside of the wholesale site:
http://www.alibaba.com/product-gs/595097536/SiKai_Ultra_slim_Leather_Case_for.html