Is this a common issue with these phones? I don't use the front camera often, but it's driving me insane to see a mountain of dust between the lens and front glass. How the hell did it even get there? I've had this phone for less than two weeks, bought it brand-new at the store, haven't dropped it, not a single scratch or problem so far, besides all this damned dust.
Sent from my HTC_Amaze_4G
dust under front camera
same issue here
You two aren't the only ones.I'm going crazy here especially when it comes to face unlock.I'd really appreciate if someone can come up with a solution as for now I don't see any way around it except opening the phone (risky) or using compressed air.
darth_09 said:
You two aren't the only ones.I'm going crazy here especially when it comes to face unlock.I'd really appreciate if someone can come up with a solution as for now I don't see any way around it except opening the phone (risky) or using compressed air.
Click to expand...
Click to collapse
I tried compressed air, didn't work. Only thing it managed to do was make my ear piece speaker sound like it's getting ready to blow up when I turn it up.
I read that it's a design flaw. Oh well. I doubt I'll use face unlock when I go ICS, or video calling. All of my friends Facetime, and I lost my iTouch. Ill just deal with it, I don't want to send this one in (I have insurance with T-Mobile) and have to root again, then end up with more dust.
Sent from my HTC_Amaze_4G
Compressed air seems to work after a while, have to take your time.
Related
I dont know why it is with these newer model phones, but just from the suggestion posts that came up when i entered the title of this thread, but My LGOT and i guess even the G2 have an issue where dusts starts to build up under the sceen....
Ive only had my phone for a little over 2 weeks, but even after the first couple days, i noticed that there were already a few trickles of dirt right around the middle of my screen.
I guess my main question is, is there anything i can do about this, has anyone had the same troubles, and what can we do to prevent this from happening?
In Thailand this is general problem of LG Optimus One
you should contact LG Customer support
they'll open your phone and blow dust out
if dust cause touchscreen malfunction they'll change new one for you
some people guess that dust already in the phone due to assembly process from factory
some guess maybe dust go through usb port
I have my phone since 2 days and i already have a dust spot in the lower right corner. This is annoying! If this spot is growing i will contact the costumer support.
Sent from my LG-P500 using XDA App
I am working on dusty area, but no dust under screen. Phone is 1 month old.
Me I have not this problem, but remains me the same issue with the iPhone 2/3 (google iphone dust screen).
I think it's a common problem with capacitive screen, but no "easy" solutions to fix it...
poor construction quality, imho.
chtamina said:
poor construction quality, imho.
Click to expand...
Click to collapse
this is one of those instances where a really cheap phone shows its faults. the phone is free on contract and little of $200 without. with it being so incredibly cheap, there is going to be something wrong that causes concern.
Im okay with it happening as long as it gets fixed and the problem is acknowledged by both LG and the phone carriers. it seems like many people are having this problem at the moment and T-Mobile is willing to exchange it in store, so good on them for being considerate.
i have the same issue. Don't know how to prevent that
ooyyeh said:
I have my phone since 2 days and i already have a dust spot in the lower right corner. This is annoying! If this spot is growing i will contact the costumer support.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Same Here! Very annoying because the phone is less than one week old!
I actually have not this problem my device is now over 2 weeks old. Maybe it depends on the area you are or temp.? ect...
Sent from my LG-P500
No dust here either. I have a silicon case, I don't think it helps very much.
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
stefanblag said:
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Can you show us a Video on how to do that?
I had problem with my device, called my operator and they exchanged my phone. New phone seems alright
Sent from my LG-P500 using XDA App
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
Hi! please tell us how to do it!
I too have this problem Can any one please let us know how to get rid of it.
I have the same problem with my Optimus One, dust is starting to gather on the right bottom corner and it seems to have increased since the first time I saw it. I've thought about buying a can of compressed air and trying to blow it near the edge of the screen but maybe that will just make it spread even further.
I've also thought about unscrewing the screws on the back panel of the phone and clean it but I'm afraid that it will affect the capacitive screen in some way making it less responsive and that after I assemble it back together it'll become even less air tight and thus accumulate even more dust.
Maybe I'll reclaim my warranty but I'll have to un-root my phone and wipe it clean before leaving it at the store and it's going to be a pain in the ass to reinstall everything when it returns.
Will they replace the mobile for this problem?
You can back up everything by titanium backup and copy the titanium backup folder from sd to your pc or pen drive. In your newly replaced phone you can copy back this folder to sd card and after installing titanium backup application you can restore everything.
S3nd41 said:
I have the same problem with my Optimus One, dust is starting to gather on the right bottom corner and it seems to have increased since the first time I saw it. I've thought about buying a can of compressed air and trying to blow it near the edge of the screen but maybe that will just make it spread even further.
I've also thought about unscrewing the screws on the back panel of the phone and clean it but I'm afraid that it will affect the capacitive screen in some way making it less responsive and that after I assemble it back together it'll become even less air tight and thus accumulate even more dust.
Maybe I'll reclaim my warranty but I'll have to un-root my phone and wipe it clean before leaving it at the store and it's going to be a pain in the ass to reinstall everything when it returns.
Click to expand...
Click to collapse
Sent from my GT-I5700 using Tapatalk
Wow, DUST really get into the phone and I thought I was the only person experiencing this... actually it's on the "RIGHT BOTTOM PART" as posted S3nd41 and probably half of the users here has this problem....
So it happened this morning when my alarm went off and it vibrated. I heard a plastic part vibrating also. The sharp loud noise was disgusting. I shut off my alarm thikning it was my cheap SGP case.
Later today I played around trying to find out if the silicone had a hole or something where the plastic frame was touching the SGS2 phone itself. Nope. I took the whole case off. Each time it vibrates it sounds like... ahh what the hell. I will film it for you guys now.
http://www.youtube.com/watch?v=_GoIrBmMC1U
WTF is that? I took the cover off. I took the SIM card out on another occasion too. It sounds like something on the upper left. If I push my finger down on the panel, it stops. If you notice the few seconds it is sitting on the table flat, it's fine. Just a little weight seems to calm it down. Not sure if its the vibrating motor itself because it is vibrating properly. Sounds like something is loose inside though...
Anyone experienced this before? Should I go for RMA?
Second part of the question:
Obviously being an XDA-er I'm rooted. I will flash back to stock and unroot. I bought this off of Expansys-USA so I should get *some* reasonable attempt by them to send it back. What are the chances that my warranty gets denied? I don't have a USB jig to reset the counter, but I'll of course get rid of the yellow triangle.
*grrrr... I need to dig up my Nexus S now if I have to go through warranty... I'm guessing I'll be phoneless for weeks*
I don't know if it would invalidate the warrenty or not (technically rooting/custom roms is supposed to), but when I had a problem with my stereo jack not working rather than risking it I just replaced the part myself.
The vibration motor, stereo jack and earphone speaker are all on the same part.
(I got it from this guy on ebay for about $7 if you're curious.)
Random6 said:
I don't know if it would invalidate the warrenty or not (technically rooting/custom roms is supposed to), but when I had a problem with my stereo jack not working rather than risking it I just replaced the part myself.
The vibration motor, stereo jack and call speaker are all on the same part.
(I got it from this guy on ebay for about $7 if you're curious.)
Click to expand...
Click to collapse
I see. I'm not sure whats broken really. When I shake my SGS2 I hear something rattling inside. I'm just afraid to open the thing up... is it difficult?
Just watched your video. It sort of sounds as if somehow the vibration motor came loose from its proper spot and is now moving around vibrating against the plastic. Its normally held in with some adhesive (basically double sided tape) within a cutout area.
When I had mine apart I actually took a photo, http://i.imgur.com/fgN9F.jpg, if that makes it any more clear.
I actually recorded the process of me reinstalling the new part (excluding the disassembly, there are lots of clips of that from other people on youtube) but havent gotten around to uploading it yet since my internet connection sucks and the file is nearly 2GB.
Edit to add:
No it wasn't really all that difficult to dissassemble, it was actually pretty easy. That said I enjoy taking things apart and trying to fix them. This was the first time I've dissassembled anything as small as a cell phone, but I'm used to taking things apart and trying to fix them when they break. If you don't have any experience taking apart electronics you might want to think twice or just pay someone who fix's cell phones to do it.
If you're thinking about it, heres a video where someone shows taking it apart to get a rough idea of whats involved.
http://www.youtube.com/watch?v=QKztg1ra4-0
I decided to try and upload the video I took, once it finishes (in about 2.5 hours) it should be viewable here:
www.youtube.com/watch?v=-ud1upGzLBs
Random6 said:
I decided to try and upload the video I took, once it finishes (in about 2.5 hours) it should be viewable here:
www.youtube.com/watch?v=-ud1upGzLBs
Click to expand...
Click to collapse
thank you for your detailed writeup. im going to try this. ive taken apart my macbook pro to install an SSD before, and a few other electronics, but i'm not the very best (i feel clumsy sometimes), but i'm willing to give this a shot.
The only thing I'm worried about is that I could potentially mess up the phone in other ways in disassembly such that my warranty won't be honored if I need to resort to that... We'll see tonight. It looks like you used two screwdrivers? Which ones will I need? I have a #000 that I see will be needed for the back plate at least...
k. opened my phone up.
i just took the screws out and the backplate. i pushd around to make sure things are tight, and they seem to be.
put it together and the vibrate thing happens VERY rarely now..
I shook my phone around and still heard something shaking (please tell me if this happens).
I opened up my phone and the camera module seems to be loose. Is it supposed to be glued down?
Just to let you know, you say you don't have a USB jig so your Flash counter may make your warranty void, but, if you flash to an ice cream sandwich ROM (Cyanogenmod 9) you can install an app called 'Triangle Away' which will basically get rid of the Flash count and yellow triangle - it needs root by the way. (search it up on XDA, it's by chainfire')
Then you can flash stock and send in for warranty.
Sent from my GT-I9100 using XDA
dmo580 said:
k. opened my phone up.
I shook my phone around and still heard something shaking (please tell me if this happens).
I opened up my phone and the camera module seems to be loose. Is it supposed to be glued down?
Click to expand...
Click to collapse
I don't remember it being glued down. Its been a few month since I fixed mine but if I recall correctly it just fit snugly in place between some plastic fitted walls.
This is the camera module you mean right?
Edit: I also don't hear anything shaking with mine, did you mabe leave a screw loose inside?
Random6 said:
I don't remember it being glued down. Its been a few month since I fixed mine but if I recall correctly it just fit snugly in place between some plastic fitted walls.
This is the camera module you mean right?
Edit: I also don't hear anything shaking with mine, did you mabe leave a screw loose inside?
Click to expand...
Click to collapse
Yeah. Camera module. That's the one. The main 8MP shooter. It's not glued down or anything. It shakes around inside. I definitely did not leave a screw inside because I only opened the back panel and I put all the screws back in.
It's weird because something making noise while shaking the phone has been documented here:
http://forum.xda-developers.com/showthread.php?t=1254520
And I noticed that when you activate camera it goes away. Quite strange but as an engineer this makes me wonder HOW that even happens? Shrug.
I'm waiting for my Samsung Focus S phone to come from the Windows Phone challenge and I'm contemplating using that for a month while my i9100 goes out for warranty. Of course I can always use my Nexus S as a backup, but part of me wants to force myself on a new platform for a month and see how that goes... Hahahaha.
Random6 said:
No it wasn't really all that difficult to dissassemble, it was actually pretty easy.
Click to expand...
Click to collapse
Hey Random6, did you happen to find that after replacing the vibrator motor with a new one, the intensity is now less than when new? I used double sided tape, but with 1.5mm, I guess the motor won't vibrate AT ALL.
Also I found that if I don't screw the one that seems to be closest to the vibrator motor all the way in, it obviously vibrates harder, but not hard enough.
I also used two very thin copper plates to sandwich the motor between the plastic plates, but once again, that was too much and the vibrations were not transfered to the phone's body, but I could hear it doing its job.
Any suggestions?
Thanks!
Well guys I already did it. I'm really good about taking care of my phones. Screen protector and case. Just got my Titan II yesterday and dropped it on the bathroom tile floor. I made the mistake of trying to save it but in the long run pushed it harder on the tile. It landed on the back side at least. I did have the case mate on it from att and a screen protector. Seems to be running fine no scratches or anything. Should I be worried?
Sent from my PI86100 using XDA Windows Phone 7 App
Did the screen break? If not, the only thing I'd be concerned about is the camera lens being broken. It's built pretty solid like the Inspire 4G so unless the screen is broken, no worries mate.
I feel ya though! I've dropped only 1 phone only 1 time and it was shattered (HD7)! Scary feeling
Thanks for the reply. No shattering here. Just pissed I guess. Thanks .. Putting my mind at ease.
Sent from my PI86100 using XDA Windows Phone 7 App
Keep a close eye on it though, I dropped my Titan onto carpet from around 3 feet whilst in its soft leather case, No damage whatsoever, Two days later it decided to get extremely hot at the rear casing, The screen would not light up and the battery ran flat in minutes, Maybe just a freak occurance but it needed to go back to HTC and they sent me a new handset, I wasn't impressed.
Sometimes i wounder it things falling are better off alone as they fall since most of the time the attempt to catch it ends up with it being slapped across the room (down), but aslong as the the camera/flash work with no visible damage then you got lucky this time.
One more thing you *might* want to check is your call quality. Since you've mentioned it fell on it's back, your antenna contacts might have pressed a little too hard on the case. See if incoming calls and outgoing calls have good enough call quality as it was before the drop. My first titan got screwed with the mic after a drop on the pavement, luckily got a replacement at the store.
hey, don't worry mate - as it is a windows phone it's made to handle tiles
malsehn said:
hey, don't worry mate - as it is a windows phone it's made to handle tiles
Click to expand...
Click to collapse
Genius!!! Pure Genius man!!
But to op, I wouldn't worry to much because I have dropped my titan multiple times on my tile with nothing but a screen protector and everything is all fine and dandy. If there is one special thing HTC has got going for them I'd say its premium build quality compared to other phone makers.
I got some dust particles on the inside of the lens which really annoys me. Due to this the camera does not focus correctly.
I really want to keep the phone waterproof so i am afraid to take it apart to clean it. Anyone experience similar issues or even swapped the backcover? Any recommendations for a backcover that ensures waterproof ability after swapping it?
thanks!
quickstyler said:
I got some dust particles on the inside of the lens which really annoys me. Due to this the camera does not focus correctly.
I really want to keep the phone waterproof so i am afraid to take it apart to clean it. Anyone experience similar issues or even swapped the backcover? Any recommendations for a backcover that ensures waterproof ability after swapping it?
thanks!
Click to expand...
Click to collapse
If you're getting dust under the lens you're obviously not water tight. I have ordered a replacement back and it cracked just picking it up. I don't know how fragile the original is but I'd be very careful while removing it. New seals can be bought for a few bucks.
not sure where this came from - the body is 100% waterproof...maybe "dust" particle is not the correct explanation
maybe is scratch dots from keys in you pocket?
it abit look like dust...
i mixed my pockets by mistake and left few dots maybe u did it lots of times.. ( i know the lens is plastic and not scratch resistance ) so i try to avoid keys in the same pocket
Superrman said:
maybe is scratch dots from keys in you pocket?
it abit look like dust...
i mixed my pockets by mistake and left few dots maybe u did it lots of times.. ( i know the lens is plastic and not scratch resistance ) so i try to avoid keys in the same pocket
Click to expand...
Click to collapse
the scratches on the outside of the lens are no problem since the sony coated this and also polishing is working quite well. also i checked this several times with a magnifier.
i have uploaded a picture of the particle that causes the faulty autofocus. at the picture on the right you can see that this is on the inside of the lens.
since the phone is waterproof this is quite clearly a production fault but since i need the phone for my everyday work and life issuing a rma at sony is no option for me.
i was just wondering is someone else experienced anything similar or swapped the backcover and tested waterproof
You can test your waterproofness of your phone to do the pressure test in the service menu.
Go to dialer and dial *#*#service#*#*, go to service test and then pressure sensor. The value indicated on the screen should increase by pressing on your screen when the phone is still waterproof.
Sent from my E5823 using XDA-Developers mobile app
Alcedii said:
You can test your waterproofness of your phone to do the pressure test in the service menu.
Go to dialer and dial *#*#service#*#*, go to service test and then pressure sensor. The value indicated on the screen should increase by pressing on your screen when the phone is still waterproof.
Sent from my E5823 using XDA-Developers mobile app
Click to expand...
Click to collapse
How much does yours go up? Mine started at 997 millbar and goes up to 1002 millbar max when I started seeing discoloration from pushing the LCD too hard.
civicsr2cool said:
How much does yours go up? Mine started at 997 millbar and goes up to 1002 millbar max when I started seeing discoloration from pushing the LCD too hard.
Click to expand...
Click to collapse
that's fine. Mine is also just a few millibar. try it with the simtray flap open. It won't increase a bit.
quickstyler said:
the scratches on the outside of the lens are no problem since the sony coated this and also polishing is working quite well. also i checked this several times with a magnifier.
i have uploaded a picture of the particle that causes the faulty autofocus. at the picture on the right you can see that this is on the inside of the lens.
since the phone is waterproof this is quite clearly a production fault but since i need the phone for my everyday work and life issuing a rma at sony is no option for me.
i was just wondering is someone else experienced anything similar or swapped the backcover and tested waterproof
Click to expand...
Click to collapse
Hi
I have had the same kind of dust in my XZ5
I sent it back and they have exchanged with a new device.
Manufacturing issue... It could happen
Sent from my HTC 10 using XDA-Developers mobile app
since sony support couldn't offer me an adequate solution for their manufacturing error I decided to find a solution by myself.
primary most important was for me that i do not open the device.
I got rid of the particle by freezing the phone in the freezer for 20min and tapping on the lens. The particle fell off and now somewhere i do not care about )
if someone has a similar issue this might be also an alternative solution
Same problem here. It supprises me the presition in which this product was conceived with programmed obsolescence. Just after guaranty ended I began to notice blurs and dust.
I suppose gaskets became less performant as they get harder and they can't hold pressure changes anymore, like when you take a plane or enter a tunnel in a train.
Vic021 said:
Same problem here. It supprises me the presition in which this product was conceived with programmed obsolescence. Just after guaranty ended I began to notice blurs and dust.
I suppose gaskets became less performant as they get harder and they can't hold pressure changes anymore, like when you take a plane or enter a tunnel in a train.
Click to expand...
Click to collapse
I have the same translucent gray dust spots on my rear camera, and tapping and bumping with strenght makes them moving around. Of course this is programmed obsolescence.
Moreover they fill phones with glue and adhesives for "water-proofness" purposes... but after 2 years of daily use, noone sane minded would submerge any phone and if you have the need, you can't easily fix anything inside the phone or change battery if you aren't a technician , because you have to use professional tools to melt glue and move parts.
That's the current world of "water-proof", thin smartphones.
Something must change if we don't want to swim in oceans made of electronic rubbish in the near future.
Hey! Looking into getting the OPPO Find X soon. I know the phone isn't IP rated but has anyone had any problems with the phone after it's been exposed to water/dust or sand. I live in England so obviously it rains a lot and wonder if using it on the rain has damaged it for anyone. Along with that, I go on holiday a lot to beaches and wonder if a single grain of sand getting in has damaged anyone's.
Thanks!
Hi there! May I know how do you take care of your Oppo Find X? How do you get about (clean) with the dust accumulating on camera? Thank you for answering.
I have not had any issue with dust, etc. But I do open the camera infrequently. I got rid of the face scan security option so it doesn't open constantly.
That being said. I could definitely see sand being problematic.
Hey! I haven't got it yet but I am planning on cleaning it with a microfiber cloth atleast once a day (especially around the camera) and I will have a case on that cuts off around the camera (obviously since it moves lol).
barrygeorge001001 said:
I have not had any issue with dust, etc. But I do open the camera infrequently. I got rid of the face scan security option so it doesn't open constantly.
That being said. I could definitely see sand being problematic.
Click to expand...
Click to collapse
Thanks!