hello, yesterday i wanted to flash a new rom.
i made full wipe, deleted cache and dalvik cache.
and i made a restart before flashing the new rom.
now i get the message: device is locked, status code:0
battery ok
ok to program
transfer mode:
usb connected
what can i do to rescue the phone ? it has been bought 3 weeks ago in germany for 489 euro.
All razrs currently have the locked status, it's referring to the boot loader which moto has declined to unlock.
Sent from my XT910 using xda premium
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
kirmizibasliklioglan said:
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
Click to expand...
Click to collapse
Can you charge the battery?
It's normal, nothing wrong happened.
At this time you can flash a new compatibile rom via RSD
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
kirmizibasliklioglan said:
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
Click to expand...
Click to collapse
Go Motorola Suport Website and look for Warranty. Provide your IMEI number and you'll get the service provider (carrier) you phone is attached. Then you'll know wich rom to flash.
Motorola Support - Warranty Status
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
But can you normally reboot your phone now?
You need to recharge before attempting to flash.
If you can't do this, try this link. I don't know if it works
http://forum.xda-developers.com/showthread.php?t=1549625
I think you can flash 651.167.26 or .19/20. You can find it on Motorola official roms thread
http://www.android-hilfe.de/root-hacking-modding-fuer-motorola-razr/232299-factory-adapter.html
5€ and your Phone will be fine...
To charge your phone: Click the link
To load a stock ROM: Click the link
If you still have questions, there's usually someone here.
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
Get your IMEI in sdcard door of your razr then visit motorola support website I posted and you'll know wich rom to flash. You'll need to flash it with a factory cable as said above.
Good luck!
Sent from my XT910 using Tapatalk 2
kirmizibasliklioglan said:
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
Click to expand...
Click to collapse
nice to hear it worked. Cheers
Sent from my XT910 using Tapatalk 2
Related
Hi,
With ATT 4.5.91 rooted unlocked phone upgrading to 4.5.141, the process failed after RSD lite 99% completed, the atrix stoped there with the message as follows:
"fail to boot 1 PwrReason: PWR_KEY_PRESS
Starting fastboot protocol support", and I re-fastbooted and
found out "recovery error 0x180004" and "OEM unlock is not implemented".
Please help. Thanks a lot.
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
weisey9 said:
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
Click to expand...
Click to collapse
WEISEY9 thanks, I failed the OTA to 2.3.4-4.5.141, so I used manual update using sd card to update.
Sorry I can't find out the unlocked.sbf you mentioned above. Can you inform where I can download it. Thanks again.
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
fail to boot 1 updating to ATT 2.3.6 4.5.141
narezese said:
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes that is the reason I request for help to get pudding or UNLOCKED.sbf to flash back to ATT 2.3.4 4.5.91.. As in China I can't access to those websites that provides said file as below (don't know what is the reason).
"1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf."
Please help if you can acess the file please send to my email below
"[email protected]" Thanks.
The file size is big
Before some of you gets upset with me posting the same kind of question, please know that I looked at the forum everywhere plus some other forums and tried almost everything. Here's the summary.
I recently got Droid Razr Asia version and I upgraded to EU Retail rom n rooted it.
There was one problem that I noticed that only bluetooth was not working.
Checked online, and found out that it's the radio mismatch b/w EU and Asia version.
So I downloaded RAZRX rom and was trying to flash it again with bootstrap.
So the process started and in 10 seconds it failed.
So I tried to search other forums ...
at some place i found that ... after Hard Resetting, clearing catche; I am also supposed to format the system.
So I followed the whole procedure, and turns out that again it does not get FLASHED. So I downloaded the ASIA version again and tried to format. It did not work. I tried with EU version, it did not work.
So after getting tired, I tried with RSDLite to flash through PC.
That's when I found out that ...
It detects the phone ... but the phone has no EMEI, software version or any other details. Everything is n/a.
Still I tried, and it said "fastboot installation failed" or somethin like that.
And now my phone is stuck on red motorola logo.
I tried to power off and go to bootloader fastboot ...
and it says "Fastboot Locked ... Press power button to power down."
I tried with the DroidRazrUtility1.4 also ...
But it does not detect the phone.
I tried other few things I found online. But nothing worked.
I also drained the battery by keeping it aside to see if the fastboot gets unlocked, but it didn't work.
However, I haven't removed the battery yet. Cause I do not have the tools.
Please can somebody tell me step by step approach how to do this?
Because I haven't found out where I am going wrong in the given methods. and btw, I have followed everything exactly step by step.
Really appreciate any kind of help.
Thank you very much.
Try to flash with RSD Alternative
http://forum.xda-developers.com/showthread.php?t=1453660
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
samthehell said:
Thanks a ton.
But will it still work if my AP FATBOOT mode says that "Device is Locked"
And the battery is on low?
Click to expand...
Click to collapse
Probably not. I read on one of the forums there might be a way around the battery being low. I think it was here in xda. Do a search for fast boot install or battery, something like that. If you find that doesn't work you would have to make the tbh cable which allows power to the phone without a battery, or in your case a near dead battery.
Sent from my Droid Razr using Tapatalk
"Device is locked" is natural, (almost) all of our bootloaders are locked. Nothing to do with flashing official ROMs.
You'll need to make a factory cable if the battery is low, search the development forum for a guide.
Sent from my XT910 using xda premium
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
samthehell said:
Thank you all ... Just ordered the cable. Hope it works.
Appreciate all the help.
Click to expand...
Click to collapse
Here is where u can find full 2.3.6 Asian fastboot file, so you can use rsd for flashing 2.3.6 but for flashing 2.3.5 you have to use Alternative rsd because of bl version
http://forum.xda-developers.com/showthread.php?p=22821170
Sliced by my Razr on Tapatalk
i've tried to install a firmware with odin and after it said passed the phone was with "downloading" screen and it turned off,and it didn't start,now i can't get it to "downloading" screen,windows doesn't recognize it,at all,no reaction no matter what i do.any sugestions?pls
synco22 said:
i've tried to install a firmware with odin and after it said passed the phone was with "downloading" screen and it turned off,and it didn't start,now i can't get it to "downloading" screen,windows doesn't recognize it,at all,no reaction no matter what i do.any sugestions?pls
Click to expand...
Click to collapse
What frimware did you flash!!??. ..... Did you try usb jig!!!?? If that doesn't work your last hope is samsung service!!
Sent from my GT-I5500 using Tapatalk 2
hello,thanks for the response,i don't know what usb jig is.i don't remeber the rom that i tried to put but i know it was android 2.3.7
Calm, which tutorial you followed exactly? Probably you are not right with the recovery or the root on the unit. If he is still going into download mode, we can still rescue it. Post at which point you are.
the phone is not starting at all,i don't see it in device manager
I have the exact same problem!
When i connect it to pc nothing happens, no charging battery, the device manager doesn't recognize it either, if i try to open it with the power button nothing happens and i also tried to pull out the battery and insert it but again nothing happens.
I think our last hope it to sent it to sumsung repair store.
Btw how much they may charge for this kind of "brick" without warranty?
dvpereira said:
Calm, which tutorial you followed exactly? Probably you are not right with the recovery or the root on the unit. If he is still going into download mode, we can still rescue it. Post at which point you are.
Click to expand...
Click to collapse
Sure hope you still visit the forum because I'm up the creek without a paddle.
I followed this tut here: http://forum.xda-developers.com/showthread.php?t=1416190 and everything worked great but it would seem that there is no baseband for the "Canadian" I5500MUGJJ7. I'm stuck in a loop and yes I can get into the download mode.
It should be noted at the start of the excellent tutorial that one would be unable to suceed if upgrading a Canadian G5.
Can you please help. Thanks
WapGiovan said:
Sure hope you still visit the forum because I'm up the creek without a paddle.
I followed this tut here: http://forum.xda-developers.com/showthread.php?t=1416190 and everything worked great but it would seem that there is no baseband for the "Canadian" I5500MUGJJ7. I'm stuck in a loop and yes I can get into the download mode.
It should be noted at the start of the excellent tutorial that one would be unable to suceed if upgrading a Canadian G5.
Can you please help. Thanks
Click to expand...
Click to collapse
try to flash with another baseband, im use 15500bvjjp9 and works fine,
I installed cm10.1, I worked for two days, last night my battery ran out this morning, I put it to charge and still nothing, not even charging via USB or a charger. What should I do?
Iwanche said:
I installed cm10.1, I worked for two days, last night my battery ran out this morning, I put it to charge and still nothing, not even charging via USB or a charger. What should I do?
Click to expand...
Click to collapse
I have the very same thing. I can get to the downloading screen (vol down, center, power) but can't get to recovery using odin and revovery clockwork. It stops at '<1> recovery.img download..' Anyone have any ideas?
Hi
Please assist in this regard, I rooted my device and installed Rom Manager, and tried to flash MIUI Rom. My devices rebooted but were stuck on the Moto boot screen. I tried system recovery by holding down volume+- & power button, and it indicated my device were locked. My battery is flat and I'm unable to charge the battery at all. firmware 65.1.40.XT910.MERetail.en.06 Android Ver : 2.3.6. How do I get my device to work again amd where can I find the original Rom to flash with RSD lite ???
You feedback would be much appreciated.
Regards.
http://forum.xda-developers.com/showthread.php?t=1539192
This should get you started. You can try an old school battery pull (yes it is possible to remove the back, just have to pry like hell)
EDIT: Found a video on youtube for exactly this scenario.
http://m.youtube.com/#/watch?featur...ch?v=QfT2Bejkcdk&feature=youtube_gdata_player
Good luck mate
Sent from my XT912 using xda premium
Team black hat adapter
shop.teamblackhat.info/Factory-Adapters-motadapt.htm
I recommend getting a tbh adapter. It lets you power the phone directly from USB even with a dead battery. After that you need to use RSD liter or a similar tool to fastboot he phone back to stock.
Resolved Problem !!!
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Bricked Razr XT910
My razr xt910 is bricked,whenever i turn it on it goes to fastboot with the following message:Ap Fastboot Flash Mode (flash failure)
Battery Low(No matter how much i hcarge it) ,Please Need Help,
Bought From London
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
lol... Am I high or did you just shoved 5v on your Razr 3.7v battery directly from the usb port?
please help me,the razr is bricked ,it says locked and rsd is not detecting it,ive been trying to unbrick for the last 4 hours.pleas help
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
Your picture inspired me so I just made a factory cable, pretty easy.
Bricked MOTOROLA xt910s
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
usman.yousaf said:
Dear concerns,
I was using MOTO xt910s Korean, during the software updating its bricked and I didn’t take any recovery backup. 1st my phone start and struck on LOGO and also go to recovery mode, but after that I discussed with one developer and he has changed the KERNAL of my mobile, now it only on in AP fastboot Mode. I am so worried about my phone, please give me solid solution. And 1 thing more during all that its battery also dead, I am also searching new battery.
I am waiting for your best and earlier response.
Thanks & Regards,
Usman
Click to expand...
Click to collapse
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Need Solution of bricked MOTO XT910S
我顶你个肺隔膜 said:
Wipe cid with fastboot.Use CMD to flash a EU Jellybean.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
usman.yousaf said:
Dear i am not a developer, i am a noob, please provide me easy way to flash my phone. please support me i am so worried
Click to expand...
Click to collapse
Maybe english is too bad to explain this..
http://pan.baidu.com/share/link?shareid=1379604126&uk=4010743545
Rember to wipe your Cid first.
Download this,extract all the files content inside to where your extraxted EU Fastboot file is.And run the 运行我.bat,this will flash the EU ROM to your phone.This thing may damge your phone(Im using it with no problem),I wont pay any responsibility to any damge to your data,hardware or anything.
Sent from my XT910 using xda app-developers app
How Did You Do This?
arendshp said:
Thanks a lot guys, i manage to fixx the problem, i made my own factory cable charge for 1 hour and flashed a stock ROM with RSD lit 5.7, works fine
Click to expand...
Click to collapse
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Daddyoyah said:
I'm in the same situation and need to charge my bricked XT910. If I can only do it the way you did, I could take it from from there with returning to stock ROM. Please show me how you did this. Thanks!
Click to expand...
Click to collapse
Motorola Fastboot/Factory Programming Cables Links
Sent from my XT907 using Tapatalk
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
You can try connecting to your PC via Odin and try the unbrick method by some guy named qbking on youtube. Link below
https://www.youtube.com/watch?v=m8tg9AlfOQ8&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
captemo said:
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
Click to expand...
Click to collapse
it was for carrier rom i wanted to return it to stock , and yeah i hooked it to the wall still didnt get any power , but im gonna check out that QBking77's Video , Ill Let you guys know , Thanks
:fingers-crossed:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
rangercaptain said:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
Click to expand...
Click to collapse
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Good For You!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Glad you're not bricked! I was bricked a few months ago, yes the real hard brick paper weight dead no response brick, not what these other post about having bricked their phone. I downloaded and installed a Liquid smooth jelly rom, but the post linked to a s3 build.
As soon as my phone didnt turn I feared the worst. Confirmed and yes it was gone. I had to send it off to get J-tagged. It worked!
Cost me a pretty penny. Then the thread mod was like oops! I linked the wrong rom hope nobody installed and got brick, just fixed it.
Ain't that some ****!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Read up my friend. It is all in the general section Super Everything, The All in one stock thread, and finally here. You are not unrooting insomuch as just flashing stock. Once you flash stock, that overwrites/deletes twrp/cwm and supersu.
Yes, as ^^^^ mentioned, you don't have to be concerned about unrooting.
There are debloated and bloated versions of stock Canadian roms in the development section. Another source for stock/carrier roms is www.samfirmware.com but you have to flash those with a pc using Odin software.