So I just used the S-off method from jupunutbear. Flashed the jb-hboot, amonra, and fixed my internal memory. reflashed Clean Rom and the OC kernel but the phone will not boot. I can still access the bootloader and recovery.
flash a rom or do a nand restore or flash your boot.img... try the boot img first
Did ya flash twice?
Sent from my ADR6425LVW using XDA
I nand restored. It was a pain trying to figure out with my laptop overheating and turning itself off. Yes I had flashed twice.
Sent from my ADR6425LVW using XDA
Related
i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Need to boot in recovery with ADB or GUI app
Sent from my PG86100 using XDA Premium App
Get into fastboot by taking out battery then [power+volume down] till it loads. Once there connect to computer and use adb and type "fastboot boot recovery.img" where recovery is the name of your chosen recovery. The recovery file must be in the same folder as the adb.
Once in recovery you can flash anything. Once you have booted a ROM I would recommend downloading flash image gui from the Market and use it to flash kernels or ROM with custom kernel. Good luck. hboot 1.50 makes things just a bit more trickier.
Recovery file could be any where you want "!
Sent from my PG86100 using XDA Premium App
przfghtr said:
i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Click to expand...
Click to collapse
NOTE: If you took the latest 651.5 update, you have to stick with kernels that have that as a base (for now).
You are likely not flashing the kernel/rom correctly. See the Guide/flashing notes in my signature for a walkthru that will likely help.
I have a similar situation. Had viper rom up and running and then it just up and quit and now it's in a continual boot loop. I'm no where near a windows CPU that I can use fastboot for the next 40 days. How can i fix with my tablet?
Sent from my Transformer TF101 using Tapatalk
Go to the library ? Rent a pc ?
Sent from my PG86100 using XDA Premium App
So in other words I'm screwed? Isn't there a way to use my tablet running android to push the boot image to the phone?
Sent from my Transformer TF101 using Tapatalk
I rooted my evo, and loaded leedroid on to it. The WiFi did not work, and I tried alot of other kernels since it should be å kernel problem. Now I flashed my nandroid just to get WiFi back, and also flashed a stock kernel. And it's still not working!
My phone is a EVO 3d gsm hboot 1.49.0018 htc unlock s-on og the stock rom and stock kernel
Does somebody out there kloss what to do?
Always use fastboot by computer to flash any zip.. or flash image GUI..
Sent from my PG86100 using xda premium
When I flashed nandroid i used clockwork mod, and for the kernel I use Flash Image GUI
brushan said:
When I flashed nandroid i used clockwork mod, and for the kernel I use Flash Image GUI
Click to expand...
Click to collapse
Boot your clockworkmod by computer via fastboot method. Thats why i hate 1.50, i need computer or notebook with adb installed to flash anything.
Sent from my PG86100 using xda premium
Ok. So I sould flash my nandroid, then use adb and flash the stock kernel there?
I think the CDMA and GSM work somewhat the same via S-ON when it comes to kernels..
You should go and wipe find a rom that is close to stock that uses the stock kernel..
Then throw it on your SD card
Now turn debug on.
Now use ADB
adb reboot bootloader
fastboot boot recovery.img
Wipe and flash the rom
Your set..
I have relocked and put recovery back to stock recovery (vigor gb) and can download ota but phone just powers down and boots to bootloader then nothing. What do I need to di. I am a newb please help me get proper recovery as I think that is the problem. I would like to go back to factory firmware and relocked
Sent from my ADR6425LVW using xda app-developers app
Read the problems thread in general. They have a lot of trouble shooting methods over there.
Sent from my SCH-I535 using xda app-developers app
Having the exact same problem. I had the phone rooted and had clockwork recovery. I relocked the phone and went back to stock recovery (using an img file posted here).
I can download the 299mb file just fine, but it reboots to fast boot every time. Thought a factory reset might help, but my phone now won't even do a factory reset. Again, it just boots to fast boot.
I think I figured out the issue. I relocked before I used the all in one toolkit to flash to stock recovery. You need to be unlocked to flash stock recovery. So I had to restore the phone to an unlocked state, flash the stock recovery, and then relock it again. Now the update seems to be going through okay.
Hello,
I was attempting to install Meanbeam.
Evo -LTE of course. I did the back up and the factor wipe then in TWRP, choice install and selected the rom from the sd card. The problem is that it has be "installing" now for about an hour and a half. It appears to be froze.
The last two lines are installing update... and formatting and mounting partition...
S- on. I was attempting to following Mikeys directions for S on phones.
At this point is there anything I can do or just let the phone sit longer?
Thanks
Edit. I was able to get it to abort. (somehow, I am not entirely sure) haha
Were you able to get your issue resolved?
Sent from my EVO using xda premium
If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.
SkedAddled said:
If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.
Click to expand...
Click to collapse
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium
FinZ28 said:
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks Guys.
I was able to get it to cancel out of the stuck install screen, I am not exactly sure what I pushed to get it to that, but.
I had an older version of TWRP.
I rooted a while ago and was just getting around to flashing a new rom.
Once i upgraded to the new TWRP the install went perfectly.
i flashed a kernel thru flash image gui now im stuck in bootloop i did hard reset formatted internal sd card, i have twrp 2.6.1.0 im s on unlocked rooted and etc tried flashing meanbean still boot looping what am i missing?
You need to flash meanbean twice for the s-on kernel installer to work... If not try the fast boot command if you are near a computer...
Sent from my EVO using Tapatalk 4
jocarog said:
You need to flash meanbean twice for the s-on kernel installer to work... If not try the fast boot command if you are near a computer...
Sent from my EVO using Tapatalk 4
Click to expand...
Click to collapse
i flashed meanbean twice, after first flash it never reboots into twrp to install kernel on second flash still bootloops.
You said you did a hard reset. Maybe you mean full wipe. I would wipe everything except SD cards and start over if you havnt already.
Maybe try fastboot flashing the kernel in case flash IMG GUI is not working for you properly.
Good luck man
Sent from my EVO using XDA Premium 4 mobile app