Installing Meanbeam - Froze - Sprint HTC EVO 4G LTE

Hello,
I was attempting to install Meanbeam.
Evo -LTE of course. I did the back up and the factor wipe then in TWRP, choice install and selected the rom from the sd card. The problem is that it has be "installing" now for about an hour and a half. It appears to be froze.
The last two lines are installing update... and formatting and mounting partition...
S- on. I was attempting to following Mikeys directions for S on phones.
At this point is there anything I can do or just let the phone sit longer?
Thanks
Edit. I was able to get it to abort. (somehow, I am not entirely sure) haha

Were you able to get your issue resolved?
Sent from my EVO using xda premium

If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.

SkedAddled said:
If your device is not in an S-Off state, I believe you'll have to flash the MeanBean boot.img booter via the fastboot command. This is what I had to do after achieving an unlocked bootloader and installing a custom recovery, such as TWRP or ClockworkMOD.
Click to expand...
Click to collapse
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium

FinZ28 said:
MeanBean has a kernel installer built in to facilitate ROM flashing when S-on. You have to flash the ROM zip twice, once to flash the ROM, then again to flash the kernel (boot.img).
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks Guys.
I was able to get it to cancel out of the stuck install screen, I am not exactly sure what I pushed to get it to that, but.
I had an older version of TWRP.
I rooted a while ago and was just getting around to flashing a new rom.
Once i upgraded to the new TWRP the install went perfectly.

Related

[Q] HTC EVO 3D boot looping post kernal install.

i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Need to boot in recovery with ADB or GUI app
Sent from my PG86100 using XDA Premium App
Get into fastboot by taking out battery then [power+volume down] till it loads. Once there connect to computer and use adb and type "fastboot boot recovery.img" where recovery is the name of your chosen recovery. The recovery file must be in the same folder as the adb.
Once in recovery you can flash anything. Once you have booted a ROM I would recommend downloading flash image gui from the Market and use it to flash kernels or ROM with custom kernel. Good luck. hboot 1.50 makes things just a bit more trickier.
Recovery file could be any where you want "!
Sent from my PG86100 using XDA Premium App
przfghtr said:
i have recently unlocked my 3d via the htc method. I had viper rom and the stock kernel on the phone. I tried to install a new kernel(anthrax infected v9). I wiped the cache and the dalvik prior to installing the kernel, post install.zip the phone is in a continuous loop. Performed wipe of all data. Tried flashing rom and kernel again, it failed again. Asked a couple of friends what might be causing this. Found out my phone has hboot 1.5 that requires flash through fastboot. How do i fix this, please help.
Click to expand...
Click to collapse
NOTE: If you took the latest 651.5 update, you have to stick with kernels that have that as a base (for now).
You are likely not flashing the kernel/rom correctly. See the Guide/flashing notes in my signature for a walkthru that will likely help.
I have a similar situation. Had viper rom up and running and then it just up and quit and now it's in a continual boot loop. I'm no where near a windows CPU that I can use fastboot for the next 40 days. How can i fix with my tablet?
Sent from my Transformer TF101 using Tapatalk
Go to the library ? Rent a pc ?
Sent from my PG86100 using XDA Premium App
So in other words I'm screwed? Isn't there a way to use my tablet running android to push the boot image to the phone?
Sent from my Transformer TF101 using Tapatalk

[Q] wifi error evo 3d stock rom and kernel

I rooted my evo, and loaded leedroid on to it. The WiFi did not work, and I tried alot of other kernels since it should be å kernel problem. Now I flashed my nandroid just to get WiFi back, and also flashed a stock kernel. And it's still not working!
My phone is a EVO 3d gsm hboot 1.49.0018 htc unlock s-on og the stock rom and stock kernel
Does somebody out there kloss what to do?
Always use fastboot by computer to flash any zip.. or flash image GUI..
Sent from my PG86100 using xda premium
When I flashed nandroid i used clockwork mod, and for the kernel I use Flash Image GUI
brushan said:
When I flashed nandroid i used clockwork mod, and for the kernel I use Flash Image GUI
Click to expand...
Click to collapse
Boot your clockworkmod by computer via fastboot method. Thats why i hate 1.50, i need computer or notebook with adb installed to flash anything.
Sent from my PG86100 using xda premium
Ok. So I sould flash my nandroid, then use adb and flash the stock kernel there?
I think the CDMA and GSM work somewhat the same via S-ON when it comes to kernels..
You should go and wipe find a rom that is close to stock that uses the stock kernel..
Then throw it on your SD card
Now turn debug on.
Now use ADB
adb reboot bootloader
fastboot boot recovery.img
Wipe and flash the rom
Your set..

[Q] Flashing countershrike - stuck on first boot

My wife and I both have rezounds and I've decided to flash countershrike 2.4. Both are unlocked and amon-ra 3.15 flashed. When I loaded countershrike on mine the first time, it never got past the first boot animation (waited for well over an hour). Eventually, after flashing an AOKP rom, then flashing countershrike again, it finally came up.
On my wife's, I cannot find any combination of steps that gets past the initial boot animation. I have tried re-flashing multiple times, wiping data, cache, dalvik cache and system and nothing works. I tried flashing the AOKP ROM as well and it was stuck on the first boot animation as well.
I'm pretty much at a total loss as to what steps to take next.
Are you s-on or s-off?
Sent from my Rezound using xda premium
zac41189 said:
Are you s-on or s-off?
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
both are s-on
btt423 said:
both are s-on
Click to expand...
Click to collapse
This might sound stupid but are you manually flashing boot.img?
Sent from my Rezound using xda premium
zac41189 said:
This might sound stupid but are you manually flashing boot.img?
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
doesn't sound crazy at all. I've done it both ways... letting it pick up the PH***.zip file and flashing the boot.img manually.
btt423 said:
doesn't sound crazy at all. I've done it both ways... letting it pick up the PH***.zip file and flashing the boot.img manually.
Click to expand...
Click to collapse
Using "fastboot flash boot boot.img"? That's weird.. With a clean install and boot being flashed it should boot up without any problems. Haven't ever experienced that before.
Sent from my Rezound using xda premium
Have you tried redownloading the rom? Also you could try using TWRP recovery or the updated CWM recovery, and see if those work.
jon7701 said:
Have you tried redownloading the rom? Also you could try using TWRP recovery or the updated CWM recovery, and see if those work.
Click to expand...
Click to collapse
This, I've had similar problems before and it was because the entire file didn't download
zac41189 said:
Using "fastboot flash boot boot.img"? That's weird.. With a clean install and boot being flashed it should boot up without any problems. Haven't ever experienced that before.
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
yeah, I used "fastboot flash boot boot.img"
jon7701 said:
Have you tried redownloading the rom? Also you could try using TWRP recovery or the updated CWM recovery, and see if those work.
Click to expand...
Click to collapse
I haven't tried redownloading, but I did verify the MD5, so I got the whole file. I haven't tried other recoveries, so I'll give that a shot this evening. The same recovery and rom downloads worked successfully on my phone, though.
You might want to try an earlier version of the kernel. I've had good luck w/ 1.7rc1 and Countershrike, which you can find the download link for in prdog's post here (post #1460)...
http://forum.xda-developers.com/showthread.php?p=33944782&highlight=1+7rc1#post33944782
Is the kernel flashing successfully? I had issues with a test version of the PH98IMG I had made early on having a parsing error in hboot. I haven't heard of it as an issue in a release version, but I want to make sure it didn't creep in.
shrike1978 said:
Is the kernel flashing successfully? I had issues with a test version of the PH98IMG I had made early on having a parsing error in hboot. I haven't heard of it as an issue in a release version, but I want to make sure it didn't creep in.
Click to expand...
Click to collapse
This is my first time flashing a ROM, so how would I check to see if the kernel flashed correctly?
shrike1978 said:
Is the kernel flashing successfully? I had issues with a test version of the PH98IMG I had made early on having a parsing error in hboot. I haven't heard of it as an issue in a release version, but I want to make sure it didn't creep in.
Click to expand...
Click to collapse
I'm going to try again this evening... want to verify the steps I need to take. Is the following correct?
Unlock device
Flash custom recovery (maybe try TWRP this time?)
Copy ROM zip to sdcard
Reboot into recovery
Wipe data
wipe cache
wipe dalvik-cache
wipe system
Flash ROM zip
Flash gapps zip
Reboot into bootloader
Flash boot.img
Reboot
When you flash the ROM, select the S-ON option and it should put a PH98IMG.zip on your SD card. When you reboot into the bootloader it will be in fastboot mode. Press the power button to select the BOOTLOADER option and it will go into the bootloader section where it should pick up the PH98IMG and offer you the option to flash it. Press VolUp and it should flash it.
btt423 said:
both are s-on
Click to expand...
Click to collapse
Why

No operating system just TWRP and Fastboot

Hello XDA family,
I have a problem
I have a Sprint Evo 4gLTE, I recently installed twrp recovery successfully. Shortly after that, I tried to flash the phone to MeanROM but it did not work. At that point I got stuck with no operating system, access to fastboot and twrp but no way to install a new operating system.
I've tried installing an RUU and it doesn not work.
I've tried different ROMS and it doesn't work.
My phone is unlocked and rooted. WHAT can I do !!!!!!!?????!!!! AAAAAA...!!! lol
Did you make a backup before trying MeanRom?
If you have access to computer and internet you can mount your phone through twrp, download a ROM to your SD card and flash it
Sent from my EVO using xda app-developers app
bigdaddy619 said:
Did you make a backup before trying MeanRom?
Click to expand...
Click to collapse
Do a what before what?
^^^^^^this guy is talking that crazy talk!^^^
Try extracting the boot.img file out of the meanbean zip, flashing it through fastboot, then going into twrp and wipe everything but ur internal/external storage, then flashing the zip like normal. I had to do it like that when I flashed meanbean, hope that helps.
Sent from my EVO using xda app-developers app

Evo LTE Flashing stock rom/kernel

I have a soft bricked Evo LTE I was trying to s-off the phone but usb debugging is a prerequisite and the phone doesn't boot to system, only hboot In the meanwhile I'd like to restore stock rom and then have the choice whether or not i wanna s-off the phone Really I just need to restore it to stock rom The kernel, a zip file, can't be flashed through recovery and there's no way to flash it through fastboot either I think What I need is a nandroid back since twrp is installed and working so if someone could give me a back I could restore through twrp rather than having to flash Please help! Thanks
You can flash the kernel via fastboot. No need to worry about USB debugging. Hit the top link in my sig and scroll down to the section on S-on kernel flashing. Otherwise, I suggest installing a ROM like MeanBean if you're on the old partition layout, as it has a kernel installer to aid with flashing while S-on.
Sent from my HTC M8
Flashing Kernel via fastboot HTC Evo LTE
OK I flash the kernel via fastboot using boot.img file but when I install the rom, Jewel_2.13.651.1_OTA_odexed_rooted_signed.zip, through recovery I get an error "kernel not installed" I'm running hboot 1.15 with s-on and twrp recovery Like I said before the phone's bricked it doesn't get past the HTC quiety brilliant screen
Magnum_Enforcer said:
You can flash the kernel via fastboot. No need to worry about USB debugging. Hit the top link in my sig and scroll down to the section on S-on kernel flashing. Otherwise, I suggest installing a ROM like MeanBean if you're on the old partition layout, as it has a kernel installer to aid with flashing while S-on.
Sent from my HTC M8
Click to expand...
Click to collapse
Did you try flashing the kernel after the ROM?
Sent from my EVO using XDA Premium 4 mobile app
Yes Maybe it's the rom i'm trying to install I dunno All I really need to do is boot the phone so i can enable usb debugging so I can s-off the phone and then installing roms should be easier Maybe I should ask for someone to post a nandroid backup? What's a good valid stock rom for this phone?
fizbanrapper said:
Did you try flashing the kernel after the ROM?
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Flash this ROM in recovery. Make sure you follow the installation instructions and also do a full wipe.
http://forum.xda-developers.com/showthread.php?t=2048229

Categories

Resources